ARM: dts: tegra: add the PM configurations of PMC
Subsystems (2)
PATCH 6/10 ARM: dts: tegra: add the PM configurations of PMC
Adding the PM configuration of PMC when the platform support suspend function.
--- arch/arm/boot/dts/tegra20-harmony.dts | 6 ++++++ arch/arm/boot/dts/tegra20-paz00.dts | 7 +++++++ arch/arm/boot/dts/tegra20-seaboard.dts | 6 ++++++ arch/arm/boot/dts/tegra20-trimslice.dts | 9 +++++++++ arch/arm/boot/dts/tegra20-ventana.dts | 6 ++++++ arch/arm/boot/dts/tegra20-whistler.dts | 8 ++++++++ arch/arm/boot/dts/tegra30-beaver.dts | 7 +++++++ arch/arm/boot/dts/tegra30-cardhu.dtsi | 7 +++++++ 8 files changed, 56 insertions(+)
arch/arm/boot/dts/tegra20-harmony.dts +6 -0
@@ -416,6 +416,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; usb at c5000000 {
arch/arm/boot/dts/tegra20-paz00.dts +7 -0
@@ -415,6 +415,13 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; + nvidia,combined-power-req; }; usb at c5000000 {
arch/arm/boot/dts/tegra20-seaboard.dts +6 -0
@@ -517,6 +517,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; memory-controller at 7000f400 {
arch/arm/boot/dts/tegra20-trimslice.dts +9 -0
@@ -300,6 +300,15 @@ }; }; + pmc { + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; + }; + usb at c5000000 { status = "okay"; nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */
arch/arm/boot/dts/tegra20-ventana.dts +6 -0
@@ -493,6 +493,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <100>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,sys-clock-req-active-high; }; usb at c5000000 {
arch/arm/boot/dts/tegra20-whistler.dts +8 -0
@@ -496,6 +496,14 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <1000>; + nvidia,core-pwr-good-time = <0 3845>; + nvidia,core-pwr-off-time = <93727>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + nvidia,combined-power-req; }; usb at c5000000 {
arch/arm/boot/dts/tegra30-beaver.dts +7 -0
@@ -253,6 +253,13 @@ pmc { status = "okay"; nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; sdhci at 78000000 {
arch/arm/boot/dts/tegra30-cardhu.dtsi +7 -0
@@ -307,6 +307,13 @@ pmc { status = "okay"; nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; sdhci at 78000000 {
Signature · 1 line
1.8.1.1
PATCH 6/10 ARM: dts: tegra: add the PM configurations of PMC
Quoted 2 lines · Joseph Lo
Adding the PM configuration of PMC when the platform support suspend function.
I think this patch should come after the current patch 9/10. The reason is that this patch enables system suspend using LP2 mode on the boards, yet patches 8/10 and 9/10 are required for system suspend to operate correctly.
PATCH 6/10 ARM: dts: tegra: add the PM configurations of PMC
Quoted 8 lines · Stephen Warren
Quoted 2 lines · Joseph Lo
Adding the PM configuration of PMC when the platform support suspend function.
I think this patch should come after the current patch 9/10. The reason is that this patch enables system suspend using LP2 mode on the boards, yet patches 8/10 and 9/10 are required for system suspend to operate correctly.
Yes.
Will re-order that.
Thanks,
Joseph