tty: serial: vt8500: Fix clock code in probe
Subsystems (2)
PATCH 1/1 tty: serial: vt8500: Fix clock code in probe
Hi Greg,
Looks like there was some kind of copy-paste messup in the probe function which has resulted in some incorrect code being left after the conversion from a fixed 24Mhz reference to a clock based driver.
This patch tidies up the initialization in probe() of the clock related bits.
Regards
Tony Prisk
Tony Prisk (1):
tty: serial: vt8500: Unneccessary duplicated clock code removed
drivers/tty/serial/vt8500_serial.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-)
Signature · 1 line
1.7.9.5
PATCH 1/1 tty: serial: vt8500: Unneccessary duplicated clock code removed
Remove the extra code left over when the serial driver was changed to require a clock. There is no fallback to 24Mhz as a clock is now required.
Also remove a second call to of_clk_get which is unnecessary.
Signed-off-by Tony Prisk <[email protected]>
--- drivers/tty/serial/vt8500_serial.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-)
drivers/tty/serial/vt8500_serial.c +1 -8
@@ -611,14 +611,7 @@ static int vt8500_serial_probe(struct platform_device *pdev) vt8500_port->uart.dev = &pdev->dev; vt8500_port->uart.flags =UPF_IOREMAP |UPF_BOOT_AUTOCONF ; - vt8500_port->clk =of_clk_get (pdev->dev.of_node,0 ); -if (!IS_ERR (vt8500_port->clk)) { - vt8500_port->uart.uartclk =clk_get_rate (vt8500_port->clk); - }else { -/* use the default of 24Mhz if not specified and warn */ -pr_warn ("%s: serial clock source not specified\n" , __func__); - vt8500_port->uart.uartclk =24000000 ; - } + vt8500_port->uart.uartclk =clk_get_rate (vt8500_port->clk);snprintf (vt8500_port->name,sizeof (vt8500_port->name),"VT8500 UART%d" , pdev->id);
Signature · 1 line
1.7.9.5