Skip to contentSkip to conversation

hwmon: (ina2xx) Fix 'Avoid unnecessary line continuations' checkpatch warni

PATCH In review Guenter Roeck 1 participant 1 message Mar 14, 2013 Hardware monitoring

lore
Share & tools
lore

Guenter Roeck

author maintainer
#0 lore raw

PATCH 5/9 hwmon: (ina2xx) Fix 'Avoid unnecessary line continuations' checkpatch warni

---
 drivers/hwmon/ina2xx.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/hwmon/ina2xx.c +8 -8
index 8e7158c..4958b2f 100644
@@ -186,20 +186,20 @@ static ssize_t ina2xx_show_value(struct device *dev,
 }
 
 /* shunt voltage */
-static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, \
-	ina2xx_show_value, NULL, INA2XX_SHUNT_VOLTAGE);
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina2xx_show_value, NULL,
+			  INA2XX_SHUNT_VOLTAGE);
 
 /* bus voltage */
-static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, \
-	ina2xx_show_value, NULL, INA2XX_BUS_VOLTAGE);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ina2xx_show_value, NULL,
+			  INA2XX_BUS_VOLTAGE);
 
 /* calculated current */
-static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, \
-	ina2xx_show_value, NULL, INA2XX_CURRENT);
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina2xx_show_value, NULL,
+			  INA2XX_CURRENT);
 
 /* calculated power */
-static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, \
-	ina2xx_show_value, NULL, INA2XX_POWER);
+static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
+			  INA2XX_POWER);
 
 /* pointers to created device attributes */
 static struct attribute *ina2xx_attributes[] = {
Signature · 7 lines
1.7.9.7


_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors