Skip to contentSkip to conversation

usb: musb/otg: cleanup and fixes

PATCH In review Kishon Vijay Abraham I 3 participants 13 messages Mar 14, 2013 – Mar 15, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover usb: musb/otg: cleanup and fixes

This series has some misc cleanup and fixes. The fix solves the cold plug issue in omap3 which some have reported. Developed these patches on fixes-for-v3.9-rc3 after applying
http://www.spinics.net/lists/linux-usb/msg81563.html
(Grazvydas Ignotas patch series)

Tested for g_zero enumeration in pandaboard and beagleboard in both cold plug and hot plug case. Any kind of testing for this series is welcome.

Changes from v1:
* removed *usb: musb: omap: remove the check before calling otg_set_vbus* a similar patch is already merged.

Kishon Vijay Abraham I (4):
usb: musb: omap: remove the check before calling otg_set_vbus
usb: otg: twl4030: use devres API for regulator get and request irq
usb: musb: omap: add usb_phy_init in omap2430_musb_init
usb: otg: twl4030: fix cold plug on OMAP3

 drivers/usb/musb/omap2430.c   |   11 +++++------
 drivers/usb/otg/twl4030-usb.c |   35 ++++++++++++-----------------------
 2 files changed, 17 insertions(+), 29 deletions(-)
Signature · 6 lines
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#1 lore raw

PATCH v2 1/4 usb: musb: omap: remove the check before calling otg_set_vbus

No functional change. otg_set_vbus is already protected so removed the check before calling otg_set_vbus.

---
 drivers/usb/musb/omap2430.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/usb/musb/omap2430.c +3 -6
index 29014c0..6071484 100644
@@ -174,8 +174,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 				}
 			}
 
-			if (otg->set_vbus)
-				otg_set_vbus(otg, 1);
+			otg_set_vbus(otg, 1);
 		} else {
 			musb->is_active = 1;
 			otg->default_a = 1;
@@ -297,10 +296,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		}
 
 		omap2430_musb_set_vbus(musb, 0);
-		if (data->interface_type == MUSB_INTERFACE_UTMI) {
-			if (musb->xceiv->otg->set_vbus)
-				otg_set_vbus(musb->xceiv->otg, 0);
-		}
+		if (data->interface_type == MUSB_INTERFACE_UTMI)
+			otg_set_vbus(musb->xceiv->otg, 0);
 		omap_control_usb_set_mode(glue->control_otghs,
 			USB_MODE_DISCONNECT);
 		break;
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH v2 2/4 usb: otg: twl4030: use devres API for regulator get and request irq

In reply to Kishon Vijay Abraham I

Used devres APIs devm_request_threaded_irq and devm_regulator_get for requesting irq and for getting regulator respectively.

---
 drivers/usb/otg/twl4030-usb.c |   28 ++++++++--------------------
 1 file changed, 8 insertions(+), 20 deletions(-)
drivers/usb/otg/twl4030-usb.c +8 -20
index 04b732e2..5b20bb4 100644
@@ -470,7 +470,7 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 	/* Initialize 3.1V regulator */
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
 
-	twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
+	twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1");
 	if (IS_ERR(twl->usb3v1))
 		return -ENODEV;
 
@@ -479,18 +479,18 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 	/* Initialize 1.5V regulator */
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
 
-	twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
+	twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5");
 	if (IS_ERR(twl->usb1v5))
-		goto fail1;
+		return -ENODEV;
 
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 
 	/* Initialize 1.8V regulator */
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
 
-	twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
+	twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8");
 	if (IS_ERR(twl->usb1v8))
-		goto fail2;
+		return -ENODEV;
 
 	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 
@@ -499,14 +499,6 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 			 TWL4030_PM_MASTER_PROTECT_KEY);
 
 	return 0;
-
-fail2:
-	regulator_put(twl->usb1v5);
-	twl->usb1v5 = NULL;
-fail1:
-	regulator_put(twl->usb3v1);
-	twl->usb3v1 = NULL;
-	return -ENODEV;
 }
 
 static ssize_t twl4030_usb_vbus_show(struct device *dev,
@@ -695,9 +687,9 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	 * need both handles, otherwise just one suffices.
 	 */
 	twl->irq_enabled = true;
-	status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
-			IRQF_ONESHOT, "twl4030_usb", twl);
+	status = devm_request_threaded_irq(twl->dev, twl->irq, NULL,
+			twl4030_usb_irq, IRQF_TRIGGER_FALLING |
+			IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl);
 	if (status < 0) {
 		dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
 			twl->irq, status);
@@ -716,7 +708,6 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
 	int val;
 
 	cancel_delayed_work(&twl->id_workaround_work);
-	free_irq(twl->irq, twl);
 	device_remove_file(twl->dev, &dev_attr_vbus);
 
 	/* set transceiver mode to power on defaults */
@@ -738,9 +729,6 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
 
 	if (!twl->asleep)
 		twl4030_phy_power(twl, 0);
-	regulator_put(twl->usb1v5);
-	regulator_put(twl->usb1v8);
-	regulator_put(twl->usb3v1);
 
 	return 0;
 }
Signature · 1 line
1.7.10.4
#3 lore raw

Re: [PATCH v2 2/4] usb: otg: twl4030: use devres API for regulator get and request irq

Quoted 4 lines · Kishon Vijay Abraham I

Used devres APIs devm_request_threaded_irq and devm_regulator_get for requesting irq and for getting regulator respectively.

please refresh this on top of my testing branch, you should be patching drivers/usb/phy/phy-twl4030-usb.c

Signature · 1 line
balbi
#4 lore raw

Re: [PATCH v2 2/4] usb: otg: twl4030: use devres API for regulator get and request irq

Quoted 8 lines · Felipe Balbi
Quoted 4 lines · Kishon Vijay Abraham I

Used devres APIs devm_request_threaded_irq and devm_regulator_get for requesting irq and for getting regulator respectively.

please refresh this on top of my testing branch, you should be patching drivers/usb/phy/phy-twl4030-usb.c

Does that mean I need to rebase my series on your testing branch too?

Quoted 3 lines

--
balbi

Signature · 5 lines
Gražvydas
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#5 lore raw

Re: [PATCH v2 2/4] usb: otg: twl4030: use devres API for regulator get and request irq

Quoted 11 lines · Grazvydas Ignotas
Quoted 8 lines · Felipe Balbi
Quoted 4 lines · Kishon Vijay Abraham I

Used devres APIs devm_request_threaded_irq and devm_regulator_get for requesting irq and for getting regulator respectively.

please refresh this on top of my testing branch, you should be patching drivers/usb/phy/phy-twl4030-usb.c

Does that mean I need to rebase my series on your testing branch too?

Oh yeah, sorry. Forgot to mention.

Signature · 1 line
balbi
#6 lore raw

PATCH v2 3/4 usb: musb: omap: add usb_phy_init in omap2430_musb_init

In reply to Kishon Vijay Abraham I

Some PHYs load too early (twl4030) making omap glue to miss cable connect events if the board is booted with cable connected. So adding usb_phy_init in omap2430_musb_init lets PHYs to report events once glue is ready.

---
 drivers/usb/musb/omap2430.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/musb/omap2430.c +2 -0
index 6071484..8876741 100644
@@ -391,6 +391,8 @@ static int omap2430_musb_init(struct musb *musb)
 	if (glue->status != OMAP_MUSB_UNKNOWN)
 		omap_musb_set_mailbox(glue);
 
+	usb_phy_init(musb->xceiv);
+
 	pm_runtime_put_noidle(musb->controller);
 	return 0;
 
Signature · 1 line
1.7.10.4
#7 lore raw

PATCH v2 4/4 usb: otg: twl4030: fix cold plug on OMAP3

In reply to Kishon Vijay Abraham I

Having twl4030_usb_phy_init() (detects if a cable is connected before twl4030 is probed) in twl4030 probe makes cable connect events to be missed by musb glue, since it gets loaded after twl4030. Having twl4030_usb_phy_init as a usb_phy ops lets twl4030_usb_phy_init to be called when glue is ready.

---
 drivers/usb/otg/twl4030-usb.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/usb/otg/twl4030-usb.c +4 -3
index 5b20bb4..4040124 100644
@@ -565,8 +565,9 @@ static void twl4030_id_workaround_work(struct work_struct *work)
 	}
 }
 
-static void twl4030_usb_phy_init(struct twl4030_usb *twl)
+static int twl4030_usb_phy_init(struct usb_phy *phy)
 {
+	struct twl4030_usb *twl = phy_to_twl(phy);
 	enum omap_musb_vbus_id_status status;
 
 	/*
@@ -581,6 +582,7 @@ static void twl4030_usb_phy_init(struct twl4030_usb *twl)
 		omap_musb_mailbox(twl->linkstat);
 
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+	return 0;
 }
 
 static int twl4030_set_suspend(struct usb_phy *x, int suspend)
@@ -657,6 +659,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	twl->phy.otg		= otg;
 	twl->phy.type		= USB_PHY_TYPE_USB2;
 	twl->phy.set_suspend	= twl4030_set_suspend;
+	twl->phy.init		= twl4030_usb_phy_init;
 
 	otg->phy		= &twl->phy;
 	otg->set_host		= twl4030_set_host;
@@ -696,8 +699,6 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 		return status;
 	}
 
-	twl4030_usb_phy_init(twl);
-
 	dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
 	return 0;
 }
Signature · 1 line
1.7.10.4
#8 lore raw

Re: [PATCH v2 4/4] usb: otg: twl4030: fix cold plug on OMAP3

Quoted 7 lines · Kishon Vijay Abraham I

Having twl4030_usb_phy_init() (detects if a cable is connected before twl4030 is probed) in twl4030 probe makes cable connect events to be missed by musb glue, since it gets loaded after twl4030. Having twl4030_usb_phy_init as a usb_phy ops lets twl4030_usb_phy_init to be called when glue is ready.

likewise. The other two I have taken

Signature · 1 line
balbi
#9 lore raw
In reply to Kishon Vijay Abraham I
Quoted 11 lines · Kishon Vijay Abraham I

This series has some misc cleanup and fixes. The fix solves the cold plug issue in omap3 which some have reported. Developed these patches on fixes-for-v3.9-rc3 after applying
http://www.spinics.net/lists/linux-usb/msg81563.html
(Grazvydas Ignotas patch series)

Tested for g_zero enumeration in pandaboard and beagleboard in both cold plug and hot plug case. Any kind of testing for this series is welcome.

Changes from v1:
* removed *usb: musb: omap: remove the check before calling otg_set_vbus*

it's still on your list of patches :-p

Quoted 4 lines

a similar patch is already merged.

Kishon Vijay Abraham I (4):
usb: musb: omap: remove the check before calling otg_set_vbus

see ^^

please fix it up and when resending add Grazvydas' Tested-by since he has tested this patchset

Signature · 1 line
balbi
author
#10 lore raw
Quoted 7 lines · Felipe Balbi
Quoted 6 lines · Kishon Vijay Abraham I

This series has some misc cleanup and fixes. The fix solves the cold plug issue in omap3 which some have reported. Developed these patches on fixes-for-v3.9-rc3 after applying
http://www.spinics.net/lists/linux-usb/msg81563.html
(Grazvydas Ignotas patch series)

Quoted 5 lines
Quoted 5 lines

Tested for g_zero enumeration in pandaboard and beagleboard in both cold plug and hot plug case. Any kind of testing for this series is welcome.

Changes from v1:
* removed *usb: musb: omap: remove the check before calling otg_set_vbus*

er.. removed *usb: musb: omap: always glue have the correct vbus/id status* since a patch similar to it is already merged.

Quoted 5 lines

it's still on your list of patches :-p

Quoted 2 lines

a similar patch is already merged.

Quoted 7 lines
Quoted 2 lines

Kishon Vijay Abraham I (4):
usb: musb: omap: remove the check before calling otg_set_vbus

see ^^

please fix it up and when resending add Grazvydas' Tested-by since he has tested this patchset

Ok.

Thanks
Kishon

#11 lore raw
Quoted 8 lines · kishon
Quoted 7 lines · Felipe Balbi
Quoted 6 lines · Kishon Vijay Abraham I

This series has some misc cleanup and fixes. The fix solves the cold plug issue in omap3 which some have reported. Developed these patches on fixes-for-v3.9-rc3 after applying
http://www.spinics.net/lists/linux-usb/msg81563.html
(Grazvydas Ignotas patch series)

Quoted 8 lines
Quoted 5 lines
Quoted 5 lines

Tested for g_zero enumeration in pandaboard and beagleboard in both cold plug and hot plug case. Any kind of testing for this series is welcome.

Changes from v1:
* removed *usb: musb: omap: remove the check before calling otg_set_vbus*

er.. removed *usb: musb: omap: always glue have the correct vbus/id status* since a patch similar to it is already merged.

alright, I'll apply this series soonish.

Signature · 1 line
balbi
author
#12 lore raw
Quoted 12 lines · Felipe Balbi
Quoted 11 lines · kishon
Quoted 10 lines · Felipe Balbi
Quoted 9 lines · Kishon Vijay Abraham I

This series has some misc cleanup and fixes. The fix solves the cold plug issue in omap3 which some have reported. Developed these patches on fixes-for-v3.9-rc3 after applying
http://www.spinics.net/lists/linux-usb/msg81563.html
(Grazvydas Ignotas patch series)

Tested for g_zero enumeration in pandaboard and beagleboard in both cold plug and hot plug case. Any kind of testing for this series is welcome.

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines

Changes from v1:
* removed *usb: musb: omap: remove the check before calling otg_set_vbus*

er.. removed *usb: musb: omap: always glue have the correct vbus/id status* since a patch similar to it is already merged.

alright, I'll apply this series soonish.

Ok.

Thanks
Kishon