Skip to contentSkip to conversation

tcg-optimize: Fold sub r,0,x to neg r,x

PATCH Applied Richard Henderson 2 participants 2 messages Mar 21, 2013 – Mar 23, 2013

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 tcg-optimize: Fold sub r,0,x to neg r,x

---
V2 properly does a reset_temp on the output of the neg. This was the cause of the sparc32 boot problem.

r~

---
 tcg/optimize.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)
tcg/optimize.c +33 -1
index bc6e5c1..1b6644c 100644
@@ -576,7 +576,8 @@ static TCGArg *tcg_constant_folding(TCGContext *s, uint16_t *tcg_opc_ptr,
             break;
         }
 
-        /* Simplify expressions for "shift/rot r, 0, a => movi r, 0" */
+        /* Simplify expressions for "shift/rot r, 0, a => movi r, 0",
+           and "sub r, 0, a => neg r, a" case.  */
         switch (op) {
         CASE_OP_32_64(shl):
         CASE_OP_32_64(shr):
@@ -592,6 +593,37 @@ static TCGArg *tcg_constant_folding(TCGContext *s, uint16_t *tcg_opc_ptr,
                 continue;
             }
             break;
+        CASE_OP_32_64(sub):
+            {
+                TCGOpcode neg_op;
+                bool have_neg;
+
+                if (temps[args[2]].state == TCG_TEMP_CONST) {
+                    /* Proceed with possible constant folding. */
+                    break;
+                }
+                if (op == INDEX_op_sub_i32) {
+                    neg_op = INDEX_op_neg_i32;
+                    have_neg = TCG_TARGET_HAS_neg_i32;
+                } else {
+                    neg_op = INDEX_op_neg_i64;
+                    have_neg = TCG_TARGET_HAS_neg_i64;
+                }
+                if (!have_neg) {
+                    break;
+                }
+                if (temps[args[1]].state == TCG_TEMP_CONST
+                    && temps[args[1]].val == 0) {
+                    s->gen_opc_buf[op_index] = neg_op;
+                    reset_temp(args[0]);
+                    gen_args[0] = args[0];
+                    gen_args[1] = args[2];
+                    args += 3;
+                    gen_args += 2;
+                    continue;
+                }
+            }
+            break;
         default:
             break;
         }
Signature · 1 line
1.8.1.4
Applied
#1 lore raw

Re: [Qemu-devel] [PATCH v2] tcg-optimize: Fold sub r, 0, x to neg r, x

Thanks, applied.

Quoted 66 lines · Richard Henderson

---
V2 properly does a reset_temp on the output of the neg. This was the cause of the sparc32 boot problem.

r~

---
 tcg/optimize.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)
tcg/optimize.c +33 -2
index bc6e5c1..1b6644c 100644
@@ -576,7 +576,8 @@ static TCGArg *tcg_constant_folding(TCGContext *s, uint16_t *tcg_opc_ptr,
             break;
         }
 
-        /* Simplify expressions for "shift/rot r, 0, a => movi r, 0" */
+        /* Simplify expressions for "shift/rot r, 0, a => movi r, 0",
+           and "sub r, 0, a => neg r, a" case.  */
         switch (op) {
         CASE_OP_32_64(shl):
         CASE_OP_32_64(shr):
@@ -592,6 +593,37 @@ static TCGArg *tcg_constant_folding(TCGContext *s, uint16_t *tcg_opc_ptr,
                 continue;
             }
             break;
+        CASE_OP_32_64(sub):
+            {
+                TCGOpcode neg_op;
+                bool have_neg;
+
+                if (temps[args[2]].state == TCG_TEMP_CONST) {
+                    /* Proceed with possible constant folding. */
+                    break;
+                }
+                if (op == INDEX_op_sub_i32) {
+                    neg_op = INDEX_op_neg_i32;
+                    have_neg = TCG_TARGET_HAS_neg_i32;
+                } else {
+                    neg_op = INDEX_op_neg_i64;
+                    have_neg = TCG_TARGET_HAS_neg_i64;
+                }
+                if (!have_neg) {
+                    break;
+                }
+                if (temps[args[1]].state == TCG_TEMP_CONST
+                    && temps[args[1]].val == 0) {
+                    s->gen_opc_buf[op_index] = neg_op;
+                    reset_temp(args[0]);
+                    gen_args[0] = args[0];
+                    gen_args[1] = args[2];
+                    args += 3;
+                    gen_args += 2;
+                    continue;
+                }
+            }
+            break;
         default:
             break;
         }
--

1.8.1.4