ppc patch queue 2013-03-22
Hi Blue / Aurelien,
This is my current patch queue for ppc. Please pull.
Alex
The following changes since commit afed26082219b49443193b4ac32d113bbcf967fd:
Edgar E. Iglesias (1):
microblaze: Ignore non-cpu accesses to unmapped areas
are available in the git repository at:
git://github.com/agraf/qemu.git ppc-for-upstream
David Gibson (52):
pseries: Fix breakage in CPU QOM conversion
pseries: Remove "busname" property for PCI host bridge
target-ppc: Remove CONFIG_PSERIES dependency in kvm.c
pseries: Move XICS initialization before cpu initialization
target-ppc: Remove vestigial PowerPC 620 support
target-ppc: Trivial cleanups in mmu_helper.c
target-ppc: Remove address check for logging
target-ppc: Move SLB handling into a mmu-hash64.c
target-ppc: Disentangle pte_check()
target-ppc: Disentangle find_pte()
target-ppc: Disentangle get_segment()
target-ppc: Rework get_physical_address()
target-ppc: Disentangle get_physical_address() paths
target-ppc: Disentangle hash mmu paths for cpu_ppc_handle_mmu_fault
target-ppc: Disentangle hash mmu versions of cpu_get_phys_page_debug()
target-ppc: Disentangle hash mmu helper functions
target-ppc: Don't share get_pteg_offset() between 32 and 64-bit
target-ppc: Disentangle BAT code for 32-bit hash MMUs
target-ppc: mmu_ctx_t should not be a global type
mmu-hash*: Add header file for definitions
mmu-hash*: Add hash pte load/store helpers
mmu-hash*: Reduce use of access_type
mmu-hash64: Remove nx from mmu_ctx_hash64
mmu-hash*: Remove eaddr field from mmu_ctx_hash{32, 64}
mmu-hash*: Combine ppc_hash{32, 64}_get_physical_address and get_segment{32, 64}()
mmu-hash32: Split out handling of direct store segments
mmu-hash32: Split direct store segment handling into a helper mmu-hash*: Cleanup segment-level NX check
mmu-hash*: Don't keep looking for PTEs after we find a match mmu-hash*: Separate PTEG searching from permissions checking mmu-hash*: Make find_pte{32, 64} do more of the job of finding ptes mmu-hash*: Remove permission checking from find_pte{32, 64}()
mmu-hash64: Clean up ppc_hash64_htab_lookup()
mmu-hash*: Fold pte_check*() logic into caller
mmu-hash32: Remove odd pointer usage from BAT code
mmu-hash32: Split BAT size logic from permissions logic
mmu-hash32: Clean up BAT matching logic
mmu-hash32: Cleanup BAT lookup
mmu-hash32: Don't look up page tables on BAT permission error mmu-hash*: Don't update PTE flags when permission is denied
mmu-hash32: Remove nx from context structure
mmu-hash*: Clean up permission checking
mmu-hash64: Factor SLB N bit into permissions bits
mmu-hash*: Clean up PTE flags update
mmu-hash*: Clean up real address calculation
mmu-hash*: Correctly mask RPN from hash PTE
mmu-hash*: Don't use full ppc_hash{32, 64}_translate() path for get_phys_page_debug() mmu-hash*: Merge translate and fault handling functions
mmu-hash64: Implement Virtual Page Class Key Protection
target-ppc: Split user only code out of mmu_helper.c
target-ppc: Move ppc tlb_fill implementation into mmu_helper.c
target-ppc: Use QOM method dispatch for MMU fault handling
Fabien Chouteau (1):
PPC/GDB: handle read and write of fpscr
Richard Henderson (5):
target-ppc: Fix add and subf carry generation in narrow mode
target-ppc: Use NARROW_MODE macro for branches
target-ppc: Use NARROW_MODE macro for comparisons
target-ppc: Use NARROW_MODE macro for addresses
target-ppc: Use NARROW_MODE macro for tlbie
gdbstub.c | 3 +- hw/ppc/spapr.c | 16 +- hw/ppc/spapr_hcall.c | 102 ++---- hw/ppc/xics.c | 57 ++-- hw/spapr_pci.c | 30 ++- hw/spapr_pci.h | 4 +- hw/xics.h | 3 +- monitor.c | 4 - target-ppc/Makefile.objs | 7 +- target-ppc/cpu-models.c | 2 +- target-ppc/cpu-qom.h | 4 + target-ppc/cpu.h | 91 +---- target-ppc/fpu_helper.c | 5 + target-ppc/helper.h | 1 - target-ppc/kvm.c | 3 +- target-ppc/machine.c | 4 +- target-ppc/mem_helper.c | 38 -- target-ppc/misc_helper.c | 6 - target-ppc/mmu-hash32.c | 560 +++++++++++++++++++++++++++ target-ppc/mmu-hash32.h | 102 +++++ target-ppc/mmu-hash64.c | 546 +++++++++++++++++++++++++++ target-ppc/mmu-hash64.h | 124 ++++++ target-ppc/mmu_helper.c | 835 ++++++++--------------------------------- target-ppc/translate.c | 226 ++++++------ target-ppc/translate_init.c | 360 +++++------------- target-ppc/user_only_helper.c | 44 +++ 26 files changed, 1873 insertions(+), 1304 deletions(-) create mode 100644 target-ppc/mmu-hash32.c create mode 100644 target-ppc/mmu-hash32.h create mode 100644 target-ppc/mmu-hash64.c create mode 100644 target-ppc/mmu-hash64.h create mode 100644 target-ppc/user_only_helper.c
PATCH 1/58 pseries: Fix breakage in CPU QOM conversion
From: David Gibson <[email protected]>
Commit 259186a7d2f7184efc96ae99bc5658e6159f53ad "cpu: Move halted and interrupt_request fields to CPUState" broke the pseries machine. That's because it uses CPU() instead of ENV_GET_CPU() to convert from the global first_cpu pointer (still a CPUArchState) to a CPUState. This patch fixes the breakage.
--- hw/ppc/spapr.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
hw/ppc/spapr.c +1 -1
@@ -629,7 +629,7 @@ static void ppc_spapr_reset(void) spapr->rtas_size);/* Set up the entry state */ - first_cpu_cpu =CPU (first_cpu); + first_cpu_cpu =ENV_GET_CPU (first_cpu); first_cpu->gpr[3 ] = spapr->fdt_addr; first_cpu->gpr[5 ] =0 ; first_cpu_cpu->halted =0 ;
Signature · 1 line
1.6.0.2
PATCH 2/58 pseries: Remove "busname" property for PCI host bridge
In reply to Alexander GrafFrom: David Gibson <[email protected]>
Currently the "spapr-pci-host-bridge" device has a "busname" property which can be used to override the default assignment of qbus names for the bus subordinate to the PHB. We use that for the default primary PCI bus, to make libvirt happy, which expects there to be a bus named simply "pci". The default qdev core logic would name the bus "pci.0", and the pseries code would otherwise name it "pci@800000020000000" which is the name it is given in the device tree based on its BUID.
The "busname" property is rather clunky though, so this patch simplifies things by just using a special case hack for the default PHB, setting busname to "pci" when index=0.
--- hw/ppc/spapr.c | 2 +- hw/spapr_pci.c | 30 ++++++++++++++++++++++-------- hw/spapr_pci.h | 4 +--- 3 files changed, 24 insertions(+), 12 deletions(-)
hw/ppc/spapr.c +1 -1
@@ -856,7 +856,7 @@ static void ppc_spapr_init(QEMUMachineInitArgs *args)/* Set up PCI */ spapr_pci_rtas_init (); - phb =spapr_create_phb (spapr,0 ,"pci" ); + phb =spapr_create_phb (spapr,0 );for (i =0 ; i < nb_nics; i++) {NICInfo *nd = &nd_table[i];
hw/spapr_pci.c +22 -8
@@ -518,6 +518,7 @@ static int spapr_phb_init(SysBusDevice *s) {sPAPRPHBState *sphb =SPAPR_PCI_HOST_BRIDGE (s);PCIHostState *phb =PCI_HOST_BRIDGE (s); +const char *busname;char *namebuf;int i;PCIBus *bus;
@@ -575,9 +576,6 @@ static int spapr_phb_init(SysBusDevice *s) } sphb->dtbusname =g_strdup_printf ("pci@%" PRIx64, sphb->buid); -if (!sphb->busname) { - sphb->busname = sphb->dtbusname; - } namebuf =alloca (strlen (sphb->dtbusname) +32 );
@@ -621,7 +619,26 @@ static int spapr_phb_init(SysBusDevice *s) &sphb->msiwindow); } - bus =pci_register_bus (DEVICE (s), sphb->busname, +/* +* Selecting a busname is more complex than you'd think, due to +* interacting constraints. If the user has specified an id +* explicitly for the phb , then we want to use the qdev default +* of naming the bus based on the bridge device (so the user can +* then assign devices to it in the way they expect). For the +* first / default PCI bus (index=0) we want to use just "pci" +* because libvirt expects there to be a bus called, simply, +* "pci". Otherwise, we use the same name as in the device tree, +* since it's unique by construction, and makes the guest visible +* BUID clear. +*/ +if (s->qdev.id) { + busname =NULL ; + }else if (sphb->index ==0 ) { + busname ="pci" ; + }else { + busname = sphb->dtbusname; + } + bus =pci_register_bus (DEVICE (s), busname, pci_spapr_set_irq, pci_spapr_map_irq, sphb, &sphb->memspace, &sphb->iospace,PCI_DEVFN (0 ,0 ),PCI_NUM_PINS );
@@ -663,7 +680,6 @@ static void spapr_phb_reset(DeviceState *qdev) }static Property spapr_phb_properties[] = { -DEFINE_PROP_STRING ("busname" , sPAPRPHBState, busname),DEFINE_PROP_INT32 ("index" , sPAPRPHBState, index,-1 ),DEFINE_PROP_HEX64 ("buid" , sPAPRPHBState, buid,-1 ),DEFINE_PROP_HEX32 ("liobn" , sPAPRPHBState, dma_liobn,-1 ),
@@ -694,14 +710,12 @@ static const TypeInfo spapr_phb_info = { .class_init = spapr_phb_class_init, }; -PCIHostState *spapr_create_phb (sPAPREnvironment *spapr,int index, -const char *busname) +PCIHostState *spapr_create_phb (sPAPREnvironment *spapr,int index) {DeviceState *dev; dev =qdev_create (NULL ,TYPE_SPAPR_PCI_HOST_BRIDGE );qdev_prop_set_uint32 (dev,"index" , index); -qdev_prop_set_string (dev,"busname" , busname);qdev_init_nofail (dev);return PCI_HOST_BRIDGE (dev);
hw/spapr_pci.h +1 -3
@@ -39,7 +39,6 @@ typedef struct sPAPRPHBState {int32_t index;uint64_t buid; -char *busname;char *dtbusname;MemoryRegion memspace, iospace;
@@ -82,8 +81,7 @@ static inline qemu_irq spapr_phb_lsi_qirq(struct sPAPRPHBState *phb, int pin)return xics_get_qirq (spapr->icp, phb->lsi_table[pin].irq); } -PCIHostState *spapr_create_phb (sPAPREnvironment *spapr,int index, -const char *busname); +PCIHostState *spapr_create_phb (sPAPREnvironment *spapr,int index); int spapr_populate_pci_dt(sPAPRPHBState *phb, uint32_t xics_phandle,
Signature · 1 line
1.6.0.2
PATCH 3/58 target-ppc: Remove CONFIG_PSERIES dependency in kvm.c
In reply to Alexander GrafFrom: David Gibson <[email protected]>
target-ppc/kvm.c has an #ifdef on CONFIG_PSERIES, for the handling of KVM exits due to a PAPR hypercall from the guest. However, since commit e4c8b28cde12d01ada8fe869567dc5717a2dfcb7 "ppc: express FDT dependency of pSeries and e500 boards via default-configs/", this hasn't worked properly. That patch altered the configuration setup so that although CONFIG_PSERIES is visible from the Makefiles, it is not visible from C files. This broke the pseries machine when KVM is in use.
This patch makes a quick and dirty fix, by removing the CONFIG_PSERIES dependency, replacing it with TARGET_PPC64 (since removing it entirely leads to type mismatch errors). Technically this breaks the build when configured with --disable-fdt, since that disables CONFIG_PSERIES on TARGET_PPC64. However, it turns out the build was already broken in that case, so this fixes pseries kvm without breaking anything extra. I'm looking into how to fix that build breakage, but I don't think that need delay applying this patch.
--- target-ppc/kvm.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
target-ppc/kvm.c +1 -1
@@ -1077,7 +1077,7 @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)dprintf ("handle halt\n" ); ret =kvmppc_handle_halt (cpu);break ; -#ifdef CONFIG_PSERIES +#if defined(TARGET_PPC64 )case KVM_EXIT_PAPR_HCALL :dprintf ("handle PAPR hypercall\n" ); run->papr_hcall.ret = spapr_hypercall(cpu,
Signature · 1 line
1.6.0.2
Quoted 103 lines · Alexander Graf
Hi Blue / Aurelien,
This is my current patch queue for ppc. Please pull.
Alex
The following changes since commit
afed26082219b49443193b4ac32d113bbcf967fd:
Edgar E. Iglesias (1):
microblaze: Ignore non-cpu accesses to unmapped areasare available in the git repository at:
git://github.com/agraf/qemu.gitppc-for-upstreamDavid Gibson (52):
pseries: Fix breakage in CPU QOM conversion
pseries: Remove "busname" property for PCI host bridge
target-ppc: RemoveCONFIG_PSERIESdependency inkvm.c
pseries: Move XICS initialization before cpu initialization
target-ppc: Remove vestigial PowerPC 620 support
target-ppc: Trivial cleanups inmmu_helper.c
target-ppc: Remove address check for logging
target-ppc: Move SLB handling into ammu-hash64.c
target-ppc: Disentanglepte_check()
target-ppc: Disentanglefind_pte()
target-ppc: Disentangleget_segment()
target-ppc: Reworkget_physical_address()
target-ppc: Disentangleget_physical_address()paths
target-ppc: Disentangle hash mmu paths forcpu_ppc_handle_mmu_fault
target-ppc: Disentangle hash mmu versions ofcpu_get_phys_page_debug()
target-ppc: Disentangle hash mmu helper functions
target-ppc: Don't shareget_pteg_offset()between 32 and 64-bit
target-ppc: Disentangle BAT code for 32-bit hash MMUs
target-ppc:mmu_ctx_tshould not be a global type
mmu-hash*: Add header file for definitions
mmu-hash*: Add hash pte load/store helpers
mmu-hash*: Reduce use ofaccess_type
mmu-hash64: Remove nx frommmu_ctx_hash64
mmu-hash*: Remove eaddr field from mmu_ctx_hash{32, 64}
mmu-hash*: Combine ppc_hash{32, 64}_get_physical_address and get_segment{32, 64}()
mmu-hash32: Split out handling of direct store segments
mmu-hash32: Split direct store segment handling into a helper mmu-hash*: Cleanup segment-level NX check
mmu-hash*: Don't keep looking for PTEs after we find a match mmu-hash*: Separate PTEG searching from permissions checking mmu-hash*: Make find_pte{32, 64} do more of the job of finding ptes mmu-hash*: Remove permission checking from find_pte{32, 64}()
mmu-hash64: Clean upppc_hash64_htab_lookup()
mmu-hash*: Fold pte_check*() logic into caller
mmu-hash32: Remove odd pointer usage from BAT code
mmu-hash32: Split BAT size logic from permissions logic
mmu-hash32: Clean up BAT matching logic
mmu-hash32: Cleanup BAT lookup
mmu-hash32: Don't look up page tables on BAT permission error mmu-hash*: Don't update PTE flags when permission is denied
mmu-hash32: Remove nx from context structure
mmu-hash*: Clean up permission checking
mmu-hash64: Factor SLB N bit into permissions bits
mmu-hash*: Clean up PTE flags update
mmu-hash*: Clean up real address calculation
mmu-hash*: Correctly mask RPN from hash PTE
mmu-hash*: Don't use full ppc_hash{32, 64}_translate() path forget_phys_page_debug()mmu-hash*: Merge translate and fault handling functions
mmu-hash64: Implement Virtual Page Class Key Protection
target-ppc: Split user only code out ofmmu_helper.c
target-ppc: Move ppctlb_fillimplementation intommu_helper.c
target-ppc: Use QOM method dispatch for MMU fault handlingFabien Chouteau (1):
PPC/GDB: handle read and write of fpscrRichard Henderson (5):
target-ppc: Fix add and subf carry generation in narrow mode
target-ppc: UseNARROW_MODEmacro for branches
target-ppc: UseNARROW_MODEmacro for comparisons
target-ppc: UseNARROW_MODEmacro for addresses
target-ppc: UseNARROW_MODEmacro for tlbiegdbstub.c | 3 +- hw/ppc/spapr.c | 16 +- hw/ppc/spapr_hcall.c | 102 ++---- hw/ppc/xics.c | 57 ++-- hw/spapr_pci.c | 30 ++- hw/spapr_pci.h | 4 +- hw/xics.h | 3 +- monitor.c | 4 - target-ppc/Makefile.objs | 7 +- target-ppc/cpu-models.c | 2 +- target-ppc/cpu-qom.h | 4 + target-ppc/cpu.h | 91 +---- target-ppc/fpu_helper.c | 5 + target-ppc/helper.h | 1 - target-ppc/kvm.c | 3 +- target-ppc/machine.c | 4 +- target-ppc/mem_helper.c | 38 -- target-ppc/misc_helper.c | 6 - target-ppc/mmu-hash32.c | 560 +++++++++++++++++++++++++++ target-ppc/mmu-hash32.h | 102 +++++ target-ppc/mmu-hash64.c | 546 +++++++++++++++++++++++++++ target-ppc/mmu-hash64.h | 124 ++++++ target-ppc/mmu_helper.c | 835 ++++++++--------------------------------- target-ppc/translate.c | 226 ++++++------
Quoted 9 lines
target-ppc/translate_init.c | 360 +++++------------- target-ppc/user_only_helper.c | 44 +++ 26 files changed, 1873 insertions(+), 1304 deletions(-) create mode 100644 target-ppc/mmu-hash32.c create mode 100644 target-ppc/mmu-hash32.h create mode 100644 target-ppc/mmu-hash64.c create mode 100644 target-ppc/mmu-hash64.h create mode 100644 target-ppc/user_only_helper.c
Thanks, pulled.
Signature · 2 lines
Aurelien Jarno GPG: 1024D/F1BCDB73 [email protected] http://www.aurel32.net