Skip to contentSkip to conversation

regulator: ab8500: Fix build error

PATCH Applied Axel Lin 3 participants 4 messages Mar 25, 2013 Voltage and current regulator framework

lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/2 regulator: ab8500: Fix build error

Fix below build error:

CC drivers/regulator/ab8500.o
drivers/regulator/ab8500.c:500:23: error: 'ab8500_regulator_fixed_ops' undeclared here (not in a function) drivers/regulator/ab8500.c: In function 'ab8500_regulator_probe':
drivers/regulator/ab8500.c:972:8: warning: assignment from incompatible pointer type [enabled by default] make[2]: *** [drivers/regulator/ab8500.o] Error 1
make[1]: *** [drivers/regulator] Error 2
make: *** [drivers] Error 2

---
 drivers/regulator/ab8500.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/regulator/ab8500.c +5 -5
index f7d1f53..a2d19c6 100644
@@ -494,10 +494,14 @@ static struct ab8500_regulator_info
 		.update_val_idle	= 0x82,
 		.update_val_normal	= 0x02,
 	},
+
+	/*
+	 * Regulators with fixed voltage and normal mode
+	 */
 	[AB8500_LDO_USB] = {
 		.desc = {
 			.name           = "LDO-USB",
-			.ops            = &ab8500_regulator_fixed_ops,
+			.ops            = &ab8500_regulator_ops,
 			.type           = REGULATOR_VOLTAGE,
 			.id             = AB8500_LDO_USB,
 			.owner          = THIS_MODULE,
@@ -508,10 +512,6 @@ static struct ab8500_regulator_info
 		.update_reg             = 0x82,
 		.update_mask            = 0x03,
 	},
-
-	/*
-	 * Regulators with fixed voltage and normal mode
-	 */
 	[AB8500_LDO_AUDIO] = {
 		.desc = {
 			.name		= "LDO-AUDIO",
Signature · 1 line
1.7.10.4
author
#1 lore raw

PATCH 2/2 regulator: ab8500: Use regulator_list_voltage_linear for fixed voltage

Both ab8500_regulator_mode_ops and ab8500_regulator_ops do not have volt_table setting, thus we can not use regulator_list_voltage_table for them. However, they have min_uV setting with n_voltages = 1, so use regulator_list_voltage_linear instead.

Also remove setting set_voltage_time_sel for ab8500_regulator_mode_ops. It is used only for fixed voltage, so it does not need to implement set_voltage_time_sel.

---
 drivers/regulator/ab8500.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/regulator/ab8500.c +2 -3
index a2d19c6..12e2740 100644
@@ -363,8 +363,7 @@ static struct regulator_ops ab8500_regulator_mode_ops = {
 	.set_mode		= ab8500_regulator_set_mode,
 	.get_mode		= ab8500_regulator_get_mode,
 	.get_voltage_sel 	= ab8500_regulator_get_voltage_sel,
-	.list_voltage		= regulator_list_voltage_table,
-	.set_voltage_time_sel	= ab8500_regulator_set_voltage_time_sel,
+	.list_voltage		= regulator_list_voltage_linear,
 };
 
 static struct regulator_ops ab8500_regulator_ops = {
@@ -372,7 +371,7 @@ static struct regulator_ops ab8500_regulator_ops = {
 	.disable		= ab8500_regulator_disable,
 	.is_enabled		= ab8500_regulator_is_enabled,
 	.get_voltage_sel 	= ab8500_regulator_get_voltage_sel,
-	.list_voltage		= regulator_list_voltage_table,
+	.list_voltage		= regulator_list_voltage_linear,
 };
 
 static struct ab8500_regulator_info
Signature · 1 line
1.7.10.4
Acked-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] regulator: ab8500: Use regulator_list_voltage_linear for fixed voltage

Quoted 11 lines · Axel Lin

Both ab8500_regulator_mode_ops and ab8500_regulator_ops do not have volt_table setting, thus we can not use regulator_list_voltage_table for them. However, they have min_uV setting with n_voltages = 1, so use regulator_list_voltage_linear instead.

Also remove setting set_voltage_time_sel for ab8500_regulator_mode_ops. It is used only for fixed voltage, so it does not need to implement set_voltage_time_sel.

Looks good to me.

Quoted 27 lines
---
 drivers/regulator/ab8500.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/regulator/ab8500.c +2 -3
index a2d19c6..12e2740 100644
@@ -363,8 +363,7 @@ static struct regulator_ops ab8500_regulator_mode_ops = {
 	.set_mode		= ab8500_regulator_set_mode,
 	.get_mode		= ab8500_regulator_get_mode,
 	.get_voltage_sel 	= ab8500_regulator_get_voltage_sel,
-	.list_voltage		= regulator_list_voltage_table,
-	.set_voltage_time_sel	= ab8500_regulator_set_voltage_time_sel,
+	.list_voltage		= regulator_list_voltage_linear,
 };
 
 static struct regulator_ops ab8500_regulator_ops = {
@@ -372,7 +371,7 @@ static struct regulator_ops ab8500_regulator_ops = {
 	.disable		= ab8500_regulator_disable,
 	.is_enabled		= ab8500_regulator_is_enabled,
 	.get_voltage_sel 	= ab8500_regulator_get_voltage_sel,
-	.list_voltage		= regulator_list_voltage_table,
+	.list_voltage		= regulator_list_voltage_linear,
 };
 
 static struct ab8500_regulator_info
Signature · 4 lines
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog