Skip to contentSkip to conversation

Quagga: deal with snmp support, and some cleanup.

PATCH Applied Aws Ismail 2 participants 4 messages Mar 25, 2013 – Mar 26, 2013

lore
Share & tools
lore

Aws Ismail

author
#0 lore raw

v3 cover Quagga: deal with snmp support, and some cleanup.

*** V3 ***
Cleanup whitespaces and hardtabs
This is made a separate new commit
*** V3 ***

Overall, this commit introduces a set of changes to do the following:

1. Update the configure option for quagga to replace the old --enable-tcp-md5
2. Add snmp support based on DISTRO_FEATURES availability.
3. Install sample runtime configuration files for quagga and its daemons.
4. Make sure the post install script is executed at the right stage.

Aws Ismail (2):
Quagga has no snmp support, unrecognized options --enable-tcp-md5
Quagga: clean up whitespaces/hardtabs in recipe

 .../recipes-protocols/quagga/quagga.inc            |   71 ++++++++++++--------
 1 files changed, 43 insertions(+), 28 deletions(-)
author
#1 lore raw

PATCH v3 1/2 Quagga has no snmp support, unrecognized options --enable-tcp-md5

1. Quagga's tcp-md5 has been renamed to linux24-tcp-md5

2. net-snmp needs to have mib-modules=smux enabled to enable quagga to support snmp. Make the net-snmp option dependent on the DISTRO_FEATURE snmp.

3. Misc: install the sample conf files for quagga. Also, Make sure that the post install script is being run on the target rather than during the rootfs creation stage.

---
 .../recipes-protocols/quagga/quagga.inc            |   23 ++++++++++++++++---
 1 files changed, 19 insertions(+), 4 deletions(-)
meta-networking/recipes-protocols/quagga/quagga.inc +19 -4
index 6ee2455..9a70d18 100644
@@ -9,11 +9,13 @@ HOMEPAGE = "http://www.quagga.net/"
 SECTION = "network"
 LICENSE = "GPL-2.0 & LGPL-2.0"
 DEPENDS = "readline ncurses perl-native"
+DEPENDS += "${@base_contains('DISTRO_FEATURES', 'snmp', 'net-snmp', '', d)}"
+SNMP_CONF="${@base_contains('DISTRO_FEATURES', 'snmp', '--enable-snmp', '', d)}"
 
 LIC_FILES_CHKSUM = "file://COPYING;md5=8ca43cbc842c2336e835926c2166c28b \
                     file://COPYING.LIB;md5=f30a9716ef3762e3467a2f62bf790f0a"
 
-INC_PR = "r0"
+INC_PR = "r1"
 
 QUAGGASUBDIR = ""
 # ${QUAGGASUBDIR} is deal with old versions. Set to "/attic" for old
@@ -46,7 +48,8 @@ EXTRA_OECONF = "--sysconfdir=${sysconfdir}/quagga \
                 --enable-configfile-mask=0640 \
                 --enable-logfile-mask=0640 \
                 --enable-rtadv \
-                --enable-tcp-md5"
+                --enable-linux24-tcp-md5 \
+                ${SNMP_CONF}"
 
 do_install () {
         # Install init script and default settings
@@ -57,6 +60,12 @@ do_install () {
         install -m 0755 ${WORKDIR}/quagga.init ${D}${sysconfdir}/init.d/quagga
         install -m 0755 ${WORKDIR}/watchquagga.init ${D}${sysconfdir}/init.d/watchquagga
         install -m 0644 ${WORKDIR}/volatiles.03_quagga  ${D}${sysconfdir}/default/volatiles/volatiles.03_quagga
+
+        # Install sample configurations for the daemons
+        for f in bgpd vtysh babeld isisd ospfd ripngd zebra ripd ospf6d; do
+            install -m 0640 ${S}/$f/$f.conf.sample ${D}${sysconfdir}/quagga/$f.conf.sample
+        done
+
         # Install quagga
         oe_runmake install DESTDIR=${D} prefix=${prefix} \
                 sbindir=${sbindir} \
@@ -106,17 +115,23 @@ INITSCRIPT_PARAMS_${PN}                 = "defaults 15 85"
 INITSCRIPT_NAME_${PN}-watchquagga       = "watchquagga"
 INITSCRIPT_PARAMS_${PN}-watchquagga     = "defaults 90 10"
 
+# Add quagga's user and group
 USERADD_PACKAGES = "${PN}"
 GROUPADD_PARAM_${PN} = "--system quagga ; --system quaggavty"
 USERADD_PARAM_${PN} = "--system --home ${localstatedir}/run/quagga/ -M -g quagga quagga"
 
 pkg_postinst_${PN} () {
-	for f in bgpd babeld isisd ospfd ripngd zebra ripd ospf6d; do touch ${sysconfdir}/quagga/$f.conf; done
+    if [ "x$D" != "x" ] ; then
+        exit 1
+    fi
+    for f in bgpd babeld isisd ospfd ripngd zebra ripd ospf6d; do touch ${sysconfdir}/quagga/$f.conf; done
 	chown quagga:quaggavty ${sysconfdir}/quagga
 	chown quagga:quagga ${sysconfdir}/quagga/*.conf
 	chmod 750 ${sysconfdir}/quagga
 	chown 640 ${sysconfdir}/quagga/*.conf
-	${sysconfdir}/init.d/populate-volatile.sh update
+    if [ -z "$D" ] && [ -e /etc/init.d/populate-volatile.sh ] ; then
+        ${sysconfdir}/init.d/populate-volatile.sh update
+    fi
 }
 
 # Stop apps before uninstall
Signature · 1 line
1.7.0.4
author
#2 lore raw

PATCH v3 2/2 Quagga: clean up whitespaces/hardtabs in recipe

In reply to Aws Ismail

Minor clean-up for some places where whitespaces
and hardtabs stil existed.

---
 .../recipes-protocols/quagga/quagga.inc            |   60 ++++++++++----------
 1 files changed, 30 insertions(+), 30 deletions(-)
meta-networking/recipes-protocols/quagga/quagga.inc +30 -30
index 9a70d18..b40c858 100644
@@ -52,32 +52,32 @@ EXTRA_OECONF = "--sysconfdir=${sysconfdir}/quagga \
                 ${SNMP_CONF}"
 
 do_install () {
-        # Install init script and default settings
-        install -m 0755 -d ${D}${sysconfdir}/default ${D}${sysconfdir}/init.d \
-                           ${D}${sysconfdir}/quagga ${D}${sysconfdir}/default/volatiles
-        install -m 0644 ${WORKDIR}/quagga.default ${D}${sysconfdir}/default/quagga
-        install -m 0644 ${WORKDIR}/watchquagga.default ${D}${sysconfdir}/default/watchquagga
-        install -m 0755 ${WORKDIR}/quagga.init ${D}${sysconfdir}/init.d/quagga
-        install -m 0755 ${WORKDIR}/watchquagga.init ${D}${sysconfdir}/init.d/watchquagga
-        install -m 0644 ${WORKDIR}/volatiles.03_quagga  ${D}${sysconfdir}/default/volatiles/volatiles.03_quagga
-
-        # Install sample configurations for the daemons
-        for f in bgpd vtysh babeld isisd ospfd ripngd zebra ripd ospf6d; do
-            install -m 0640 ${S}/$f/$f.conf.sample ${D}${sysconfdir}/quagga/$f.conf.sample
-        done
-
-        # Install quagga
-        oe_runmake install DESTDIR=${D} prefix=${prefix} \
-                sbindir=${sbindir} \
-                sysconfdir=${sysconfdir}/quagga \
-                localstatedir=${localstatedir}/run/quagga
-
-	# Fix hardcoded paths
-	sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/*
-	sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/quagga
-	sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/* ${D}${sysconfdir}/default/watchquagga
-	sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/* ${D}${sysconfdir}/default/volatiles/volatiles.03_quagga
-	sed -i 's!^PATH=.*!PATH=${base_sbindir}:${sbindir}:${base_bindir}:${bindir}!' ${D}${sysconfdir}/init.d/*
+    # Install init script and default settings
+    install -m 0755 -d ${D}${sysconfdir}/default ${D}${sysconfdir}/init.d \
+    ${D}${sysconfdir}/quagga ${D}${sysconfdir}/default/volatiles
+    install -m 0644 ${WORKDIR}/quagga.default ${D}${sysconfdir}/default/quagga
+    install -m 0644 ${WORKDIR}/watchquagga.default ${D}${sysconfdir}/default/watchquagga
+    install -m 0755 ${WORKDIR}/quagga.init ${D}${sysconfdir}/init.d/quagga
+    install -m 0755 ${WORKDIR}/watchquagga.init ${D}${sysconfdir}/init.d/watchquagga
+    install -m 0644 ${WORKDIR}/volatiles.03_quagga  ${D}${sysconfdir}/default/volatiles/volatiles.03_quagga
+
+    # Install sample configurations for the daemons
+    for f in bgpd vtysh babeld isisd ospfd ripngd zebra ripd ospf6d; do
+        install -m 0640 ${S}/$f/$f.conf.sample ${D}${sysconfdir}/quagga/$f.conf.sample
+    done
+
+    # Install quagga
+    oe_runmake install DESTDIR=${D} prefix=${prefix} \
+            sbindir=${sbindir} \
+            sysconfdir=${sysconfdir}/quagga \
+            localstatedir=${localstatedir}/run/quagga
+
+    # Fix hardcoded paths
+    sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/*
+    sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/quagga
+    sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/* ${D}${sysconfdir}/default/watchquagga
+    sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/* ${D}${sysconfdir}/default/volatiles/volatiles.03_quagga
+    sed -i 's!^PATH=.*!PATH=${base_sbindir}:${sbindir}:${base_bindir}:${bindir}!' ${D}${sysconfdir}/init.d/*
 }
 
 # Split into a main package and separate per-protocol packages
@@ -125,10 +125,10 @@ pkg_postinst_${PN} () {
         exit 1
     fi
     for f in bgpd babeld isisd ospfd ripngd zebra ripd ospf6d; do touch ${sysconfdir}/quagga/$f.conf; done
-	chown quagga:quaggavty ${sysconfdir}/quagga
-	chown quagga:quagga ${sysconfdir}/quagga/*.conf
-	chmod 750 ${sysconfdir}/quagga
-	chown 640 ${sysconfdir}/quagga/*.conf
+    chown quagga:quaggavty ${sysconfdir}/quagga
+    chown quagga:quagga ${sysconfdir}/quagga/*.conf
+    chmod 750 ${sysconfdir}/quagga
+    chown 640 ${sysconfdir}/quagga/*.conf
     if [ -z "$D" ] && [ -e /etc/init.d/populate-volatile.sh ] ; then
         ${sysconfdir}/init.d/populate-volatile.sh update
     fi
Signature · 1 line
1.7.0.4
#3 lore raw
In reply to Aws Ismail
Quoted 13 lines · [[meta-networking][PATCH 0/2][V3] Quagga: deal with snmp support, and some…

*** V3 ***
Cleanup whitespaces and hardtabs
This is made a separate new commit
*** V3 ***

Overall, this commit introduces a set of changes to do the following:

1. Update the configure option for quagga to replace the old --enable-tcp-md5
2. Add snmp support based on DISTRO_FEATURES availability.
3. Install sample runtime configuration files for quagga and its daemons.
4. Make sure the post install script is executed at the right stage.

Quoted 6 lines

Aws Ismail (2):
Quagga has no snmp support, unrecognized options --enable-tcp-md5
Quagga: clean up whitespaces/hardtabs in recipe

 .../recipes-protocols/quagga/quagga.inc            |   71 ++++++++++++--------
 1 files changed, 43 insertions(+), 28 deletions(-)

Merged, thanks.

Signature · 2 lines
-Joe MacDonald.
:wq