Skip to contentSkip to conversation

f2fs-tools: mkfs: fix to avoid format of device when already mounted

PATCH New Namjae Jeon 1 participant 1 message Mar 31, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 f2fs-tools: mkfs: fix to avoid format of device when already mounted

From: Namjae Jeon <[email protected]>

In case of embedded devices, where /etc/ is mounted as 'read-only'. We donot have the /etc/mtab file. So, checking if the device is already mounted from this file is not sufficient.
Try to read /proc/mounts in case of failure from /etc/mtab.

Issue logs:
/dev/sdb4 /mnt vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437, iocharset=ascii,errors=remount-ro 0 0

Here device - sb4 is already mounted.
But, when trying to format using mkfs.f2fs

F2FS-tools: Ver: 1.1.0 (2013-01-14)
Info: sector size = 512
Info: total sectors = 13108784 (in 512bytes)
WARN: Align start sector number in a unit of pages

        i.e., start sector: 2542124, ofs:4 (sectors per page: 8)

Info: zone aligned segment0 blkaddr: 186
Info: This device doesn't support TRIM
Info: format successful

After Change:

F2FS-tools: Ver: 1.1.0 (2013-01-14)
Error: /dev/sdb4 is already mounted

---
 lib/libf2fs.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
lib/libf2fs.c +7 -2
index 37ed147..d228492 100644
@@ -152,8 +152,13 @@ int f2fs_dev_is_mounted(struct f2fs_configuration *c)
 	struct mntent *mnt = NULL;
 
 	file = setmntent(MOUNTED, "r");
-	if (file == NULL)
-		return 0;
+	if (file == NULL) {
+		/* if failed due to /etc/mtab file not present
+		   try with /proc/mounts */
+		file = setmntent("/proc/mounts", "r");
+		if (file == NULL)
+			return 0;
+	}
 
 	while (1) {
 		mnt = getmntent(file);
Signature · 1 line
1.7.9.5