Skip to contentSkip to conversation

HID: wiimote: use unique battery names

PATCH Applied David Herrmann 2 participants 4 messages Apr 2, 2013 – Apr 4, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 HID: wiimote: use unique battery names

Battery device names must be unique, otherwise registration fails if multiple Wii Remotes are connected.

This breaks the sysfs API, but there is no known application that uses the Wii Remote battery that I know of so we should go ahead and apply this.

---
 drivers/hid/hid-wiimote-core.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/hid/hid-wiimote-core.c +9 -1
index 84e2fbe..c73bc80 100644
@@ -1160,6 +1160,7 @@ static void wiimote_destroy(struct wiimote_data *wdata)
 	wiimote_leds_destroy(wdata);
 
 	power_supply_unregister(&wdata->battery);
+	kfree(wdata->battery.name);
 	input_unregister_device(wdata->accel);
 	input_unregister_device(wdata->ir);
 	input_unregister_device(wdata->input);
@@ -1216,9 +1217,14 @@ static int wiimote_hid_probe(struct hid_device *hdev,
 	wdata->battery.properties = wiimote_battery_props;
 	wdata->battery.num_properties = ARRAY_SIZE(wiimote_battery_props);
 	wdata->battery.get_property = wiimote_battery_get_property;
-	wdata->battery.name = "wiimote_battery";
 	wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
 	wdata->battery.use_for_apm = 0;
+	wdata->battery.name = kasprintf(GFP_KERNEL, "wiimote_battery_%s",
+					wdata->hdev->uniq);
+	if (!wdata->battery.name) {
+		ret = -ENOMEM;
+		goto err_battery_name;
+	}
 
 	ret = power_supply_register(&wdata->hdev->dev, &wdata->battery);
 	if (ret) {
@@ -1254,6 +1260,8 @@ err_free:
 	return ret;
 
 err_battery:
+	kfree(wdata->battery.name);
+err_battery_name:
 	input_unregister_device(wdata->input);
 	wdata->input = NULL;
 err_input:
Signature · 1 line
1.8.2
#1 lore raw

PATCH 2/3 HID: wiimote: add 2nd generation Wii Remote IDs

This adds the 2nd generation Wii Remote IDs. They have a different Bluetooth chipset (CSR instead of Broadcom) and are more restrictive in what they accept as input. Hence, you need up-to-date BlueZ and Bluetooth HIDP modules to use these devices.

---
 drivers/hid/hid-core.c         | 1 +
 drivers/hid/hid-ids.h          | 1 +
 drivers/hid/hid-wiimote-core.c | 2 ++
 3 files changed, 4 insertions(+)
drivers/hid/hid-core.c +1 -0
index ceb3040..b0ad27a 100644
@@ -1741,6 +1741,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
 	{ }
 };
 
drivers/hid/hid-ids.h +1 -0
index 266e2ae..a775b1c 100644
@@ -605,6 +605,7 @@
 
 #define USB_VENDOR_ID_NINTENDO		0x057e
 #define USB_DEVICE_ID_NINTENDO_WIIMOTE	0x0306
+#define USB_DEVICE_ID_NINTENDO_WIIMOTE2	0x0330
 
 #define USB_VENDOR_ID_NOVATEK		0x0603
 #define USB_DEVICE_ID_NOVATEK_PCT	0x0600
drivers/hid/hid-wiimote-core.c +2 -0
index c73bc80..d2c69b9 100644
@@ -1291,6 +1291,8 @@ static void wiimote_hid_remove(struct hid_device *hdev)
 static const struct hid_device_id wiimote_hid_devices[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
 				USB_DEVICE_ID_NINTENDO_WIIMOTE) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
+				USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, wiimote_hid_devices);
Signature · 1 line
1.8.2
#2 lore raw

PATCH 3/3 HID: wiimote: parse reduced status reports

In reply to David Herrmann

It turns out the Wii accepts any status reports from clients reduced to "BB BB" key data only, as long as the report actually includes key data at the first two bytes.

The official devices don't send these reduced reports, but of course, 3rd party devices make great use of this feature.

Hence, add parsers for these reduced reports for every matching report. Also change the logic how we find handlers. There is no reason to call multiple handlers on a single report, but instead find the best handler and call it only once.

---
 drivers/hid/hid-wiimote-core.c | 31 +++++++++++++++++++++++++++----
 1 file changed, 27 insertions(+), 4 deletions(-)
drivers/hid/hid-wiimote-core.c +27 -4
index d2c69b9..3118d058 100644
@@ -789,12 +789,20 @@ static void __ir_to_input(struct wiimote_data *wdata, const __u8 *ir,
 	input_report_abs(wdata->ir, yid, y);
 }
 
-static void handler_status(struct wiimote_data *wdata, const __u8 *payload)
+/* reduced status report with "BB BB" key data only */
+static void handler_status_K(struct wiimote_data *wdata,
+			     const __u8 *payload)
 {
 	handler_keys(wdata, payload);
 
 	/* on status reports the drm is reset so we need to resend the drm */
 	wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+}
+
+/* extended status report with "BB BB LF 00 00 VV" data */
+static void handler_status(struct wiimote_data *wdata, const __u8 *payload)
+{
+	handler_status_K(wdata, payload);
 
 	wiiext_event(wdata, payload[2] & 0x02);
 
@@ -804,6 +812,12 @@ static void handler_status(struct wiimote_data *wdata, const __u8 *payload)
 	}
 }
 
+/* reduced generic report with "BB BB" key data only */
+static void handler_generic_K(struct wiimote_data *wdata, const __u8 *payload)
+{
+	handler_keys(wdata, payload);
+}
+
 static void handler_data(struct wiimote_data *wdata, const __u8 *payload)
 {
 	__u16 offset = payload[3] << 8 | payload[4];
@@ -947,16 +961,26 @@ struct wiiproto_handler {
 
 static struct wiiproto_handler handlers[] = {
 	{ .id = WIIPROTO_REQ_STATUS, .size = 6, .func = handler_status },
+	{ .id = WIIPROTO_REQ_STATUS, .size = 2, .func = handler_status_K },
 	{ .id = WIIPROTO_REQ_DATA, .size = 21, .func = handler_data },
+	{ .id = WIIPROTO_REQ_DATA, .size = 2, .func = handler_generic_K },
 	{ .id = WIIPROTO_REQ_RETURN, .size = 4, .func = handler_return },
+	{ .id = WIIPROTO_REQ_RETURN, .size = 2, .func = handler_generic_K },
 	{ .id = WIIPROTO_REQ_DRM_K, .size = 2, .func = handler_keys },
 	{ .id = WIIPROTO_REQ_DRM_KA, .size = 5, .func = handler_drm_KA },
+	{ .id = WIIPROTO_REQ_DRM_KA, .size = 2, .func = handler_generic_K },
 	{ .id = WIIPROTO_REQ_DRM_KE, .size = 10, .func = handler_drm_KE },
+	{ .id = WIIPROTO_REQ_DRM_KE, .size = 2, .func = handler_generic_K },
 	{ .id = WIIPROTO_REQ_DRM_KAI, .size = 17, .func = handler_drm_KAI },
+	{ .id = WIIPROTO_REQ_DRM_KAI, .size = 2, .func = handler_generic_K },
 	{ .id = WIIPROTO_REQ_DRM_KEE, .size = 21, .func = handler_drm_KEE },
+	{ .id = WIIPROTO_REQ_DRM_KEE, .size = 2, .func = handler_generic_K },
 	{ .id = WIIPROTO_REQ_DRM_KAE, .size = 21, .func = handler_drm_KAE },
+	{ .id = WIIPROTO_REQ_DRM_KAE, .size = 2, .func = handler_generic_K },
 	{ .id = WIIPROTO_REQ_DRM_KIE, .size = 21, .func = handler_drm_KIE },
+	{ .id = WIIPROTO_REQ_DRM_KIE, .size = 2, .func = handler_generic_K },
 	{ .id = WIIPROTO_REQ_DRM_KAIE, .size = 21, .func = handler_drm_KAIE },
+	{ .id = WIIPROTO_REQ_DRM_KAIE, .size = 2, .func = handler_generic_K },
 	{ .id = WIIPROTO_REQ_DRM_E, .size = 21, .func = handler_drm_E },
 	{ .id = WIIPROTO_REQ_DRM_SKAI1, .size = 21, .func = handler_drm_SKAI1 },
 	{ .id = WIIPROTO_REQ_DRM_SKAI2, .size = 21, .func = handler_drm_SKAI2 },
@@ -970,7 +994,6 @@ static int wiimote_hid_event(struct hid_device *hdev, struct hid_report *report,
 	struct wiiproto_handler *h;
 	int i;
 	unsigned long flags;
-	bool handled = false;
 
 	if (size < 1)
 		return -EINVAL;
@@ -981,11 +1004,11 @@ static int wiimote_hid_event(struct hid_device *hdev, struct hid_report *report,
 		h = &handlers[i];
 		if (h->id == raw_data[0] && h->size < size) {
 			h->func(wdata, &raw_data[1]);
-			handled = true;
+			break;
 		}
 	}
 
-	if (!handled)
+	if (!handlers[i].id)
 		hid_warn(hdev, "Unhandled report %hhu size %d\n", raw_data[0],
 									size);
 
Signature · 1 line
1.8.2
Applied
#3 lore raw
In reply to David Herrmann
Quoted 2 lines · David Herrmann

Battery device names must be unique, otherwise registration fails if multiple Wii Remotes are connected.

Applied the series, thanks David.

Signature · 2 lines
Jiri Kosina
SUSE Labs