fsl_esdhc: flush cache after IO completion
PATCH 1/1 fsl_esdhc: flush cache after IO completion
The cache should invalidate the read buffer for the SD card interface after the transfer complete, not command-complete.
Tested-by Andrew Gabbasov <[email protected]>
Signed-off-by Eric Nelson <[email protected]>
--- drivers/mmc/fsl_esdhc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/mmc/fsl_esdhc.c +2 -3
@@ -327,9 +327,6 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)while (!(esdhc_read32 (®s->irqstat) & (IRQSTAT_CC |IRQSTAT_CTOE ))) ; -if (data && (data->flags &MMC_DATA_READ )) -check_and_invalidate_dcache_range (cmd, data); - irqstat =esdhc_read32 (®s->irqstat);esdhc_write32 (®s->irqstat, irqstat);
@@ -403,6 +400,8 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) } while (!(irqstat & IRQSTAT_TC) && (esdhc_read32 (®s->prsstat) &PRSSTAT_DLA ));#endif +if (data->flags &MMC_DATA_READ ) +check_and_invalidate_dcache_range (cmd, data); }esdhc_write32 (®s->irqstat,-1 );
Signature · 1 line
1.7.9.5