blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
PATCH 1/1 blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
From: Sonic Zhang <[email protected]>
- Enable hw_watchdog_init() in watchdog.h if CONFIG_HW_WATCHDOG is defined.
- Move blackfin hw watchdog driver to the generic driver folder.
- Call hw_watchdog_init() from blackfin board init code.
- Reuse macro CONFIG_WATCHDOG_TIMEOUT_MSECS
- Update README.watchdog accordingly
Signed-off-by Sonic Zhang <[email protected]>
--- arch/blackfin/cpu/Makefile | 1 - arch/blackfin/cpu/start.S | 13 ++++++------- arch/blackfin/lib/board.c | 4 ++-- doc/README.watchdog | 3 +++ drivers/watchdog/Makefile | 1 + .../cpu/watchdog.c => drivers/watchdog/bfin_wdt.c | 2 +- include/configs/bfin_adi_common.h | 6 ++++++ include/watchdog.h | 3 +-- 8 files changed, 20 insertions(+), 13 deletions(-) rename arch/blackfin/cpu/watchdog.c => drivers/watchdog/bfin_wdt.c (83%)
arch/blackfin/cpu/Makefile +0 -1
@@ -25,7 +25,6 @@ COBJS-y += os_log.o COBJS-y += reset.o COBJS-y += serial.o COBJS-y += traps.o -COBJS-$(CONFIG_HW_WATCHDOG) += watchdog.o SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
arch/blackfin/cpu/start.S +6 -7
@@ -65,20 +65,19 @@ ENTRY(_start) p5.h = HI(COREMMR_BASE); #ifdef CONFIG_HW_WATCHDOG -#ifndef __ADSPBF60x__ -# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START -# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 -# endif - /* Program the watchdog with an initial timeout of ~5 seconds. + /* Program the watchdog with default timeout of ~5 seconds. * That should be long enough to bootstrap ourselves up and * then the common u-boot code can take over. */ r0 = 0; - r0.h = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START)); + r0.h = HI(MSEC_TO_SCLK(CONFIG_WATCHDOG_TIMEOUT_MSECS)); [p4 + (WDOG_CNT - SYSMMR_BASE)] = r0; /* fire up the watchdog - R0.L above needs to be 0x0000 */ +# ifdef __ADSPBF60x__ + [p4 + (WDOG_CTL - SYSMMR_BASE)] = r0; +# else W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0; -#endif +# endif #endif /* Turn on the serial for debugging the init process */
arch/blackfin/lib/board.c +2 -2
@@ -279,9 +279,9 @@ void board_init_f(ulong bootflag)dcache_enable ();#endif -#ifdef CONFIG_WATCHDOG +#ifdef CONFIG_HW_WATCHDOG serial_early_puts ("Setting up external watchdog\n" ); -watchdog_init (); +hw_watchdog_init ();#endif #ifdef DEBUG
doc/README.watchdog +3 -0
@@ -27,3 +27,6 @@ CONFIG_IMX_WATCHDOG Available for i.mx31/35/5x/6x to service the watchdog. This is not automatically set because some boards (vision2) still need to define their own hw_watchdog_reset routine. + +CONFIG_BFIN_WATCHDOG + Available for bf5xx and bf6xx to service the watchdog.
drivers/watchdog/Makefile +1 -0
@@ -32,6 +32,7 @@ COBJS-y += imx_watchdog.o endif COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o COBJS-$(CONFIG_S5P) += s5p_wdt.o +COBJS-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c)
drivers/watchdog/bfin_wdt.c renamed from arch/blackfin/cpu/watchdog.c +1 -1
@@ -17,7 +17,7 @@ void hw_watchdog_reset(void)void hw_watchdog_init (void ) { -bfin_write_WDOG_CNT (5 *get_sclk ());/* 5 second timeout */ +bfin_write_WDOG_CNT (CONFIG_WATCHDOG_TIMEOUT_MSECS /1000 *get_sclk ());hw_watchdog_reset ();bfin_write_WDOG_CTL (0x0 ); }
include/configs/bfin_adi_common.h +6 -0
@@ -314,5 +314,11 @@#define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ #define CONFIG_LZMA #define CONFIG_MONITOR_IS_IN_RAM +#ifdef CONFIG_HW_WATCHDOG +# define CONFIG_BFIN_WATCHDOG +# ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS +# define CONFIG_WATCHDOG_TIMEOUT_MSECS 5000 +# endif +#endif #endif
include/watchdog.h +1 -2
@@ -90,8 +90,7 @@void reset_4xx_watchdog (void );#endif -/* Freescale i.MX */ -#if defined(CONFIG_IMX_WATCHDOG ) && !defined(__ASSEMBLY__) +#if defined(CONFIG_HW_WATCHDOG ) && !defined(__ASSEMBLY__)void hw_watchdog_init (void );#endif #endif /* _WATCHDOG_H_ */
Signature · 1 line
1.7.0.4