Net patches
v2:
* Include git-request-pull(1) output [aliguori]
This pull request fixes the vmxnet3 big-endian host build failure and allows iPXE to netboot on vmxnet3.
The following changes since commit 9196dd411d580c27f85daa209ff9a501d719ebc0:
Merge branch 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm (2013-04-06 12:53:54 +0000)
are available in the git repository at:
git://github.com/stefanha/qemu.git net
for you to fetch changes up to 389dd80795c646c914ab3c4366c9409e309f0e4f:
vmxnet3: const_cpu_to_le64 wrapping for feature bits dropped (2013-04-08 14:01:25 +0200)
----------------------------------------------------------------
Dmitry Fleytman (2):
vmxnet3: iPXE compatibility fixes
vmxnet3: const_cpu_to_le64 wrapping for feature bits dropped
hw/vmxnet3.c | 11 +++++++++++ hw/vmxnet3.h | 11 ++++------- 2 files changed, 15 insertions(+), 7 deletions(-)
Signature · 1 line
1.8.1.4
PATCH v2 1/2 vmxnet3: iPXE compatibility fixes
From: Dmitry Fleytman <[email protected]>
iPXE vmxnet3 driver makes a few assumptions regarding device operation that were missed during testing with Linux and Windows drivers. This patch adds following logic:
1. Additional GET commands processing added
2. Max number of RX chunks should be set to 1 when driver passes 0 via corresponding shared memory field
3. Enforecement for max chunks number added
--- hw/vmxnet3.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
hw/vmxnet3.c +11 -0
@@ -1033,6 +1033,7 @@ vmxnet3_indicate_packet(VMXNET3State *s) is_head = false; ready_rxcd_pa = new_rxcd_pa; new_rxcd_pa =0 ; + num_frags++; }if (0 != ready_rxcd_pa) {
@@ -1324,6 +1325,10 @@ static void vmxnet3_activate_device(VMXNET3State *s) s->max_rx_frags =VMXNET3_READ_DRV_SHARED16 (s->drv_shmem, devRead.misc.maxNumRxSG); +if (s->max_rx_frags ==0 ) { + s->max_rx_frags =1 ; + } +VMW_CFPRN ("Max RX fragments is %u" , s->max_rx_frags); s->event_int_idx =
@@ -1524,6 +1529,12 @@ static uint64_t vmxnet3_get_command_status(VMXNET3State *s)VMW_CFPRN ("Device active: %" PRIx64, ret);break ; +case VMXNET3_CMD_RESET_DEV : +case VMXNET3_CMD_QUIESCE_DEV : +case VMXNET3_CMD_GET_QUEUE_STATUS : + ret =0 ; +break ; +case VMXNET3_CMD_GET_LINK : ret = s->link_status_and_speed;VMW_CFPRN ("Link and speed: %" PRIx64, ret);
Signature · 1 line
1.8.1.4
PATCH v2 2/2 vmxnet3: const_cpu_to_le64 wrapping for feature bits dropped
In reply to Stefan HajnocziFrom: Dmitry Fleytman <[email protected]>
Byte swap is redundant because shared memory reading functions already swap bytes when required
--- hw/vmxnet3.h | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)
hw/vmxnet3.h +4 -7
@@ -37,10 +37,8 @@#define __packed QEMU_PACKED#if defined(HOST_WORDS_BIGENDIAN ) -#define const_cpu_to_le64 (x) bswap_64(x)#define __BIG_ENDIAN_BITFIELD#else -#define const_cpu_to_le64 (x) (x)#endif /*
@@ -137,10 +135,10 @@ struct UPT1_RSSConf {/* features */ enum { -UPT1_F_RXCSUM =const_cpu_to_le64 (0x0001 ),/* rx csum verification */ -UPT1_F_RSS =const_cpu_to_le64 (0x0002 ), -UPT1_F_RXVLAN =const_cpu_to_le64 (0x0004 ),/* VLAN tag stripping */ -UPT1_F_LRO =const_cpu_to_le64 (0x0008 ), +UPT1_F_RXCSUM =0x0001 ,/* rx csum verification */ +UPT1_F_RSS =0x0002 , +UPT1_F_RXVLAN =0x0004 ,/* VLAN tag stripping */ +UPT1_F_LRO =0x0008 , };/* all registers are 32 bit wide */
@@ -752,7 +750,6 @@ struct Vmxnet3_DriverShared {#undef __le32#undef __le64#undef __packed -#undef const_cpu_to_le64#if defined(HOST_WORDS_BIGENDIAN )#undef __BIG_ENDIAN_BITFIELD#endif
Signature · 1 line
1.8.1.4