treewide: Fix typo in printks
Subsystems (9)
Correct spelling typos in printk and comments.
Signed-off-by Masanari Iida <[email protected]>
--- drivers/media/pci/saa7164/saa7164-core.c | 2 +- drivers/rtc/Kconfig | 4 ++-- drivers/rtc/rtc-max8997.c | 2 +- drivers/usb/misc/iowarrior.c | 4 ++-- drivers/usb/misc/uss720.c | 2 +- drivers/video/amifb.c | 2 +- drivers/video/auo_k190x.c | 2 +- drivers/video/goldfishfb.c | 2 +- drivers/video/s1d13xxxfb.c | 2 +- drivers/video/ssd1307fb.c | 4 ++-- fs/nfs/objlayout/objio_osd.c | 2 +- fs/nfs/objlayout/objlayout.h | 2 +- sound/soc/codecs/wm8974.c | 2 +- tools/perf/tests/attr.c | 2 +- tools/perf/tests/parse-events.c | 2 +- 15 files changed, 18 insertions(+), 18 deletions(-)
drivers/media/pci/saa7164/saa7164-core.c +1 -1
@@ -54,7 +54,7 @@ MODULE_PARM_DESC(debug, "enable debug messages");unsigned int fw_debug;module_param (fw_debug, int,0644 ); -MODULE_PARM_DESC (fw_debug,"Firware debug level def:2" ); +MODULE_PARM_DESC (fw_debug,"Firmware debug level def:2" );unsigned int encoder_buffers =SAA7164_MAX_ENCODER_BUFFERS ;module_param (encoder_buffers, int,0644 );
drivers/rtc/Kconfig +2 -2
@@ -402,7 +402,7 @@ config RTC_DRV_TPS6586X tristate "TI TPS6586X RTC driver" depends on MFD_TPS6586X help - TI Power Managment IC TPS6586X supports RTC functionality + TI Power Management IC TPS6586X supports RTC functionality along with alarm. This driver supports the RTC driver for the TPS6586X RTC module.
@@ -420,7 +420,7 @@ config RTC_DRV_TPS80031 tristate "TI TPS80031/TPS80032 RTC driver" depends on MFD_TPS80031 help - TI Power Managment IC TPS80031 supports RTC functionality + TI Power Management IC TPS80031 supports RTC functionality along with alarm. This driver supports the RTC driver for the TPS80031 RTC module.
drivers/rtc/rtc-max8997.c +1 -1
@@ -24,7 +24,7 @@/* Module parameter for WTSR function control */ static int wtsr_en =1 ;module_param (wtsr_en, int,0444 ); -MODULE_PARM_DESC (wtsr_en,"Wachdog Timeout & Sofware Reset (default=on)" ); +MODULE_PARM_DESC (wtsr_en,"Watchdog Timeout & Software Reset (default=on)" );/* Module parameter for SMPL function control */ static int smpl_en =1 ;module_param (smpl_en, int,0444 );
drivers/usb/misc/iowarrior.c +2 -2
@@ -672,7 +672,7 @@ static int iowarrior_release(struct inode *inode, struct file *file) retval = -ENODEV ;/* close called more than once */ mutex_unlock (&dev->mutex); }else { - dev->opened =0 ;/* we're closeing now */ + dev->opened =0 ;/* we're closing now */ retval =0 ;if (dev->present) {/*
@@ -802,7 +802,7 @@ static int iowarrior_probe(struct usb_interface *interface,/* this one will match for the IOWarrior56 only */ dev->int_out_endpoint = endpoint; } -/* we have to check the report_size often, so remember it in the endianess suitable for our machine */ +/* we have to check the report_size often, so remember it in the endianness suitable for our machine */ dev->report_size =usb_endpoint_maxp (dev->int_in_endpoint);if ((dev->interface->cur_altsetting->desc.bInterfaceNumber ==0 ) && (dev->product_id ==USB_DEVICE_ID_CODEMERCS_IOW56 ))
drivers/usb/misc/uss720.c +1 -1
@@ -705,7 +705,7 @@ static int uss720_probe(struct usb_interface *intf,return -ENODEV ; } i =usb_set_interface (usbdev, intf->altsetting->desc.bInterfaceNumber,2 ); -dev_dbg (&intf->dev,"set inteface result %d\n" , i); +dev_dbg (&intf->dev,"set interface result %d\n" , i); interface = intf->cur_altsetting;
drivers/video/amifb.c +1 -1
@@ -1181,7 +1181,7 @@ static int ami_decode_var(struct fb_var_screeninfo *var, struct amifb_par *par, }/* -* FB_VMODE_SMOOTH_XPAN will be cleared, if one of the folloing +* FB_VMODE_SMOOTH_XPAN will be cleared, if one of the following * checks failed and smooth scrolling is not possible */
drivers/video/auo_k190x.c +1 -1
@@ -935,7 +935,7 @@ int auok190x_common_probe(struct platform_device *pdev, goto err_defio; } -dev_dbg (info->device,"targetting %d frames per second\n" , board->fps); +dev_dbg (info->device,"targeting %d frames per second\n" , board->fps); info->fbdefio->delay =HZ / board->fps; info->fbdefio->first_io = auok190xfb_dpy_first_io, info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io,
drivers/video/goldfishfb.c +1 -1
@@ -148,7 +148,7 @@ static int goldfish_fb_pan_display(struct fb_var_screeninfo *var,wait_event_timeout (fb->wait, fb->base_update_count != base_update_count,HZ /15 );if (fb->base_update_count == base_update_count) -pr_err ("goldfish_fb_pan_display: timeout wating for base update\n" ); +pr_err ("goldfish_fb_pan_display: timeout waiting for base update\n" );return 0 ; }
drivers/video/s1d13xxxfb.c +1 -1
@@ -862,7 +862,7 @@ static int s1d13xxxfb_probe(struct platform_device *pdev) printk(KERN_INFO PFX"unknown chip production id %i, revision %i\n" , prod_id, revision); - printk(KERN_INFO PFX "please contant maintainer\n"); + printk(KERN_INFO PFX "please contact maintainer\n"); goto bail; }
drivers/video/ssd1307fb.c +2 -2
@@ -1,5 +1,5 @@/* -* Driver for the Solomon SSD1307 OLED controler +* Driver for the Solomon SSD1307 OLED controller * * Copyright 2012 Free Electrons *
@@ -392,6 +392,6 @@ static struct i2c_driver ssd1307fb_driver = {module_i2c_driver (ssd1307fb_driver); -MODULE_DESCRIPTION ("FB driver for the Solomon SSD1307 OLED controler" ); +MODULE_DESCRIPTION ("FB driver for the Solomon SSD1307 OLED controller" );MODULE_AUTHOR ("Maxime Ripard <[email protected]>" );MODULE_LICENSE ("GPL" );
fs/nfs/objlayout/objio_osd.c +1 -1
@@ -234,7 +234,7 @@ static int __alloc_objio_seg(unsigned numdevs, gfp_t gfp_flags, lseg =kzalloc (lseg_size, gfp_flags);if (unlikely (!lseg)) { -dprintk ("%s: Faild allocation numdevs=%d size=%zd\n" , __func__, +dprintk ("%s: Failed allocation numdevs=%d size=%zd\n" , __func__, numdevs, lseg_size);return -ENOMEM ; }
fs/nfs/objlayout/objlayout.h +1 -1
@@ -114,7 +114,7 @@ extern int objio_alloc_lseg(struct pnfs_layout_segment **outp, gfp_t gfp_flags);extern void objio_free_lseg (struct pnfs_layout_segment *lseg); -/* objio_free_result will free these @oir structs recieved from +/* objio_free_result will free these @oir structs received from * objlayout_{read,write}_done */ extern void objio_free_result (struct objlayout_io_res *oir);
sound/soc/codecs/wm8974.c +1 -1
@@ -125,7 +125,7 @@ SOC_ENUM("Equaliser EQ4 Bandwidth", wm8974_enum[9]),SOC_ENUM ("EQ4 Cut Off" , wm8974_enum[10 ]),SOC_SINGLE_TLV ("EQ4 Volume" ,WM8974_EQ4 ,0 ,24 ,1 , eq_tlv), -SOC_ENUM ("Equaliser EQ5 Bandwith" , wm8974_enum[11 ]), +SOC_ENUM ("Equaliser EQ5 Bandwidth" , wm8974_enum[11 ]),SOC_ENUM ("EQ5 Cut Off" , wm8974_enum[12 ]), SOC_SINGLE_TLV("EQ5 Volume", WM8974_EQ5, 0, 24, 1, eq_tlv),
tools/perf/tests/attr.c +1 -1
@@ -173,6 +173,6 @@ int test__attr(void) !lstat(path_perf, &st))return run_dir (path_dir, path_perf); -fprintf (stderr," (ommitted)" ); +fprintf (stderr," (omitted)" );return 0 ; }
tools/perf/tests/parse-events.c +1 -1
@@ -1321,7 +1321,7 @@ static int test_pmu_events(void) ret =stat (path, &st);if (ret) { -pr_debug ("ommiting PMU cpu events tests\n" ); +pr_debug ("omitting PMU cpu events tests\n" );return 0 ; }
Signature · 1 line
1.8.2.451.gbfd70c5
Randy Dunlap
Acked-byQuoted 3 lines · Masanari Iida
Correct spelling typos in printk and comments.
Signed-off-by Masanari Iida <[email protected]>
Acked-by Randy Dunlap <[email protected]>
Thanks.
Quoted 18 lines
--- drivers/media/pci/saa7164/saa7164-core.c | 2 +- drivers/rtc/Kconfig | 4 ++-- drivers/rtc/rtc-max8997.c | 2 +- drivers/usb/misc/iowarrior.c | 4 ++-- drivers/usb/misc/uss720.c | 2 +- drivers/video/amifb.c | 2 +- drivers/video/auo_k190x.c | 2 +- drivers/video/goldfishfb.c | 2 +- drivers/video/s1d13xxxfb.c | 2 +- drivers/video/ssd1307fb.c | 4 ++-- fs/nfs/objlayout/objio_osd.c | 2 +- fs/nfs/objlayout/objlayout.h | 2 +- sound/soc/codecs/wm8974.c | 2 +- tools/perf/tests/attr.c | 2 +- tools/perf/tests/parse-events.c | 2 +- 15 files changed, 18 insertions(+), 18 deletions(-)
Signature · 1 line
~Randy