Modifying the exponential backoff on new connection SYN packets
Subsystems (2)
Hi, I have an unusual situation in that I would like to cap the retransmit frequency on the initial SYN packets at some fairly short time interval, eg a max of 2-4 seconds, rather than the usual exponentially increasing interval. I could use some help figuring out the exact point in the kernel to make such a change please?
The situation is that I am building a firewall which will be used with expensive satellite links (think $10-100/MB range). Some of the links are dialup links which take 20-40 seconds to bring up, and then we have PPP drop the link after 10 seconds of inactivity. However, with the default exponential backoff on new connections we are generally retransmitting with a 16sec or 32 sec interval by the time the dialup link is connected, the timout for inactivity kicks in and drops the link before the retransmit...
I believe the exponential backoff is intended to prevent amplification attacks? In this particular case we are accounting for traffic per user and the internet costs are extremely substantial, so I think it's not a problem
Could someone please help figure out the appropriate place to tweak the exponential backoff? Note this is not retransmit of in flight data, just the backoff for the initial syn (which doesn't seem to be configurable in user space?)
Note, we have an application proxy here, but I can't see a sensible way to fake it in user space without a lot of extra coding - any suggestions?
Thanks
Ed W
Quoted 20 lines · Ed W
Hi, I have an unusual situation in that I would like to cap the retransmit frequency on the initial SYN packets at some fairly short time interval, eg a max of 2-4 seconds, rather than the usual exponentially increasing interval. I could use some help figuring out the exact point in the kernel to make such a change please?
The situation is that I am building a firewall which will be used with expensive satellite links (think $10-100/MB range). Some of the links are dialup links which take 20-40 seconds to bring up, and then we have PPP drop the link after 10 seconds of inactivity. However, with the default exponential backoff on new connections we are generally retransmitting with a 16sec or 32 sec interval by the time the dialup link is connected, the timout for inactivity kicks in and drops the link before the retransmit...
I believe the exponential backoff is intended to prevent amplification attacks? In this particular case we are accounting for traffic per user and the internet costs are extremely substantial, so I think it's not a problem
Quoted 7 lines
Could someone please help figure out the appropriate place to tweak the exponential backoff? Note this is not retransmit of in flight data, just the backoff for the initial syn (which doesn't seem to be configurable in user space?)
Note, we have an application proxy here, but I can't see a sensible way to fake it in user space without a lot of extra coding - any suggestions?
You'll have to change inet_csk_reqsk_queue_prune() in net/ipv4/inet_connection_sock.c
timeo = min(timeout << req->num_timeout, max_rto); req->expires = now + timeo;
Good luck !
Quoted 7 lines · Eric Dumazet
You'll have to change
inet_csk_reqsk_queue_prune()innet/ipv4/inet_connection_sock.ctimeo =
min(timeout << req->num_timeout, max_rto);req->expires= now + timeo;Good luck !
Oh well, this code is for SYNACK retransmits...
For other retransmits, you'll have to take a look in net/ipv4/tcp_timer.c, around lines 475
icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);
Quoted 8 lines · Eric Dumazet
Quoted 6 lines · Eric Dumazet
You'll have to change
inet_csk_reqsk_queue_prune()innet/ipv4/inet_connection_sock.ctimeo =
min(timeout << req->num_timeout, max_rto);req->expires= now + timeo;
Quoted 9 lines
Quoted 1 line
Good luck !
Oh well, this code is for SYNACK retransmits...
For other retransmits, you'll have to take a look in
net/ipv4/tcp_timer.c, around lines 475
icsk->icsk_rto=min(icsk->icsk_rto << 1, TCP_RTO_MAX);
Hmm, I don't necessarily want to change the normal data timeouts, just the initial SYN timeouts. How might I make detect that I'm in SYN state and cap the timer appropriately? Apologies for beginner questions...
Thanks
Ed W
Quoted 15 lines · Ed W
Quoted 14 lines · Eric Dumazet
Quoted 7 lines · Eric Dumazet
You'll have to change
inet_csk_reqsk_queue_prune()innet/ipv4/inet_connection_sock.ctimeo =
min(timeout << req->num_timeout, max_rto);req->expires= now + timeo;Good luck !
Oh well, this code is for SYNACK retransmits...
For other retransmits, you'll have to take a look in
net/ipv4/tcp_timer.c, around lines 475
Quoted 7 lines
Quoted 3 lines
icsk->icsk_rto=min(icsk->icsk_rto << 1, TCP_RTO_MAX);Hmm, I don't necessarily want to change the normal data timeouts, just the initial SYN timeouts. How might I make detect that I'm in SYN state and cap the timer appropriately? Apologies for beginner questions...
You'll have to add a test on :
if (sk->sk_state == TCP_SYN_SENT)
should be pretty easy.