blackfin: Add comments for watchdog event initialization.
PATCH 1/1 blackfin: Add comments for watchdog event initialization.
From: Sonic Zhang <[email protected]>
- Add comments for watchdog event initialization.
- Make sure the writting operation to MMRs are finished.
Signed-off-by Sonic Zhang <[email protected]>
--- arch/blackfin/cpu/initcode.c | 12 ++++++++++-- 1 files changed, 10 insertions(+), 2 deletions(-)
arch/blackfin/cpu/initcode.c +10 -2
@@ -458,15 +458,23 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB)if (CONFIG_BFIN_BOOT_MODE !=BFIN_BOOT_BYPASS ) {serial_putc ('e' );#ifdef __ADSPBF60x__ +/* Reset system event controller */ bfin_write_SEC_GCTL (0x2 ); +bfin_write_SEC_CCTL (0x2 );SSYNC (); + +/* Enable fault event input and system reset action in fault +* controller. Route watchdog timeout event to fault interface. +*/ bfin_write_SEC_FCTL (0xc1 ); +/* Enable watchdog interrupt source */ bfin_write_SEC_SCTL (2 ,bfin_read_SEC_SCTL (2 ) |0x6 ); - -bfin_write_SEC_CCTL (0x2 );SSYNC (); + +/* Enable system event controller */ bfin_write_SEC_GCTL (0x1 );bfin_write_SEC_CCTL (0x1 ); +SSYNC ();#endif bfin_write_WDOG_CTL (WDDIS );SSYNC ();
Signature · 1 line
1.7.0.4