arm: vt8500: Add SDHC support to WM8505 DT
PATCH 1/1 arm: vt8500: Add SDHC support to WM8505 DT
This patch adds the required node for the SDHC controller on WM8505 SoCs.
Signed-off-by Tony Prisk <[email protected]>
---
Arnd,
Any chance you can apply this for 3.10
Regards
Ton yP
arch/arm/boot/dts/wm8505.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
arch/arm/boot/dts/wm8505.dtsi +31 -0
@@ -60,6 +60,19 @@ clock-frequency = <24000000>; }; + ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + pllb: pllb { + #clock-cells = <0>; + compatible = "via,vt8500-pll-clock"; + clocks = <&ref25>; + reg = <0x204>; + }; + clkuart0: uart0 { #clock-cells = <0>; compatible = "via,vt8500-device-clock";
@@ -107,6 +120,16 @@ enable-reg = <0x250>; enable-bit = <23>; }; + + clksdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; + }; }; };
@@ -187,5 +210,13 @@ reg = <0xd8100000 0x10000>; interrupts = <48>; }; + + sdhc at d800a000 { + compatible = "wm,wm8505-sdhc"; + reg = <0xd800a000 0x1000>; + interrupts = <20 21>; + clocks = <&clksdhc>; + bus-width = <4>; + }; }; };
Signature · 1 line
1.7.9.5
Olof Johansson
AppliedQuoted 7 lines · Tony Prisk
This patch adds the required node for the SDHC controller on WM8505 SoCs.
Signed-off-by Tony Prisk <[email protected]>---
Arnd,Any chance you can apply this for 3.10
Applied to next/dt
-Olof