Nintendo Wii Remote Extension Hotplugging
Subsystems (2)
cover Nintendo Wii Remote Extension Hotplugging
Hi
Last two month I sat down and started reverse-engineering the wiimote protocol again. My goal was to finally get reliable extension hotplugging. What I then ended up with was a huge Bluetooth-HID rewrite, a major hid-wiimote modularization and finally working extension hotplug support.
The patches in Detail:
- #1 to #6 are small fixes and initial device-detection logic. They are fairly simple and fix small issues I encountered.
- #7 to #12 move all the sub-device drivers into modules. This allows us to extend device detection and load only the sub-devices that are actually present. For instance, the Balance Board does only provide one LED so we should not register led #2-#4. Note that the balance board still emulates the other LEDs in the protocol so we wouldn't notice that they are not present if we didn't know.
- #13 to #17 implement extension hotplugging. Patch #13 extends the core to handle hotplugging and #14 to #17 implement the protocol parsers as modules so we can dynamically load different modules.
- #18 to #21 add sysfs attributes and contain small fixes
I know that the driver became pretty huge, but it currently contains an IR-camera driver, 4 accelerometer/gyro drivers, force-feedback driver, LED driver, weight-sensor driver and like 5 different button/joystick drivers. So considering that I think it's actually pretty small.
Another point is that I tried to be as conservative as possible. I tested this code with several 3rd-party devices and all of them ended up breaking at some point because they expect the exact Wii-Console behavior. I fixed everything I found but I need more input from users here. At least I don't break any devices that worked with the driver so far (as far as I know).
Also please don't merge it, yet. I still have to remove hid-wiimote-ext.c as it is no longer needed, but I haven't tested how this affects backwards-compatibility. I did my best to not break existing user-space, but I want to do some more tests. So if there are no comments on this series, I will resend in about 1 week with a ready-to-merge series. But I wanted to see whether anyone has issues with the patches, first.
Some sidenotes:
- Marcel already ACK'ed my Bluetooth HIDP rewrite which finally gives us working Bluetooth HID without any kernel oops. Gustavo is currently applying the patches. This series doesn't exactly depend on it, but you cannot test Bluetooth device hotplugging without it, because the kernel just breaks.
- I currently work on the "Wii U Pro Controller". It's similar to the Classic Controller and I hope I can include patches for it in the next revision.
- I also work on reverse-engineering the Wii U GamePad. It uses 5Ghz 802.11n instead of Bluetooth, but the Miracast (Wifi Display) protocol allows a separate HID stream side-by-side with the MPEG-4 video stream. So there might be a new hid_ll_driver in the future. However, I guess UHID will serve well for the beginning.
Last but not least I noticed that we duplicate the HID Boot Protocol in usbhid and Bluetooth HID. The Wifi-Display HID also provides some similar protocol. So I currently look into creating a hid-boot.c so we have a central place that implements it.
Cheers
David
David Herrmann (21):
HID: wiimote: extend driver description
HID: wiimote: move queue handling into separate struct
HID: wiimote: keep HID device open
HID: wiimote: add device detection
HID: wiimote: use cached battery values on I/O failure
HID: wiimote: wake up if output queue failed
HID: wiimote: add sub-device module infrastructure
HID: wiimote: convert KEYS and RUMBLE to modules
HID: wiimote: convert BATTERY to module
HID: wiimote: convert LEDS to modules
HID: wiimote: convert ACCEL to module
HID: wiimote: convert IR to module
HID: wiimote: add extension hotplug support
HID: wiimote: add Balance Board support
HID: wiimote: add Nunchuk support
HID: wiimote: add Classic Controller extension
HID: wiimote: add Motion Plus extension module
HID: wiimote: fix ctx pointer in debugfs DRM-write
HID: wiimote: lock DRM mode during debugfs overwrite
HID: wiimote: add sysfs extension/device-type attrs
HID: wiimote: add "bboard_calib" attribute
drivers/hid/Kconfig | 20 +- drivers/hid/Makefile | 2 +- drivers/hid/hid-wiimote-core.c | 1571 +++++++++++++++++++++------------ drivers/hid/hid-wiimote-debug.c | 10 +- drivers/hid/hid-wiimote-ext.c | 16 +- drivers/hid/hid-wiimote-modules.c | 1717 +++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 168 +++- 7 files changed, 2925 insertions(+), 579 deletions(-) create mode 100644 drivers/hid/hid-wiimote-modules.c
Signature · 1 line
1.8.2.1
PATCH 1/21 HID: wiimote: extend driver description
The hid-wiimote driver supports more than the Wii Remote. Nintendo produced many devices based on the Wii Remote, which have extension devices built-in. It is not clear to many users, that these devices have anything in common with the Wii Remote, so fix the driver description.
This also updates the copyright information for the coming hotplugging rework.
--- drivers/hid/Kconfig | 20 ++++++++++++++++++-- drivers/hid/hid-wiimote-core.c | 6 +++--- drivers/hid/hid-wiimote-debug.c | 4 ++-- drivers/hid/hid-wiimote-ext.c | 4 ++-- drivers/hid/hid-wiimote.h | 4 ++-- 5 files changed, 27 insertions(+), 11 deletions(-)
drivers/hid/Kconfig +18 -2
@@ -696,13 +696,29 @@ config HID_WACOM Support for Wacom Graphire Bluetooth and Intuos4 WL tablets. config HID_WIIMOTE - tristate "Nintendo Wii Remote support" + tristate "Nintendo Wii / Wii U peripherals" depends on HID depends on LEDS_CLASS select POWER_SUPPLY select INPUT_FF_MEMLESS ---help--- - Support for the Nintendo Wii Remote bluetooth device. + Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported + devices are the Wii Remote and its extension devices, but also devices + based on the Wii Remote like the Wii U Pro Controller or the + Wii Balance Board. + + Support for all official Nintendo extensions is available, however, 3rd + party extensions might not be supported. Please report these devices to: + http://github.com/dvdhrm/xwiimote/issues + + Other Nintendo Wii U peripherals that are IEEE 802.11 based (including + the Wii U Gamepad) might be supported in the future. But currently + support is limited to Bluetooth based devices. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called hid-wiimote. config HID_WIIMOTE_EXT bool "Nintendo Wii Remote Extension support"
drivers/hid/hid-wiimote-core.c +3 -3
@@ -1,6 +1,6 @@/* -* HID driver for Nintendo Wiimote devices -* Copyright (c) 2011 David Herrmann +* HID driver for Nintendo Wii / Wii U peripherals +* Copyright (c) 2011-2013 David Herrmann <[email protected]> */ /*
@@ -1331,4 +1331,4 @@ module_hid_driver(wiimote_hid_driver);MODULE_LICENSE ("GPL" );MODULE_AUTHOR ("David Herrmann <[email protected]>" ); -MODULE_DESCRIPTION (WIIMOTE_NAME " Device Driver" ); +MODULE_DESCRIPTION ("Driver for Nintendo Wii / Wii U peripherals" );
drivers/hid/hid-wiimote-debug.c +2 -2
@@ -1,6 +1,6 @@/* -* Debug support for HID Nintendo Wiimote devices -* Copyright (c) 2011 David Herrmann +* Debug support for HID Nintendo Wii / Wii U peripherals +* Copyright (c) 2011-2013 David Herrmann <[email protected]> */ /*
drivers/hid/hid-wiimote-ext.c +2 -2
@@ -1,6 +1,6 @@/* -* HID driver for Nintendo Wiimote extension devices -* Copyright (c) 2011 David Herrmann +* HID driver for Nintendo Wii / Wii U peripheral extensions +* Copyright (c) 2011-2013 David Herrmann <[email protected]> */ /*
drivers/hid/hid-wiimote.h +2 -2
@@ -2,8 +2,8 @@#define __HID_WIIMOTE_H/* -* HID driver for Nintendo Wiimote devices -* Copyright (c) 2011 David Herrmann +* HID driver for Nintendo Wii / Wii U peripherals +* Copyright (c) 2011-2013 David Herrmann <[email protected]> */ /*
Signature · 1 line
1.8.2.1
PATCH 2/21 HID: wiimote: move queue handling into separate struct
In reply to David HerrmannThe output queue is independent of the other wiimote modules and can run on its own. Therefore, move its members into a separate struct so we don't run into name collisions with other modules.
This is only a syntactic change that renames all queue members to queue.*.
--- drivers/hid/hid-wiimote-core.c | 53 +++++++++++++++++++++++------------------- drivers/hid/hid-wiimote.h | 15 +++++++----- 2 files changed, 38 insertions(+), 30 deletions(-)
drivers/hid/hid-wiimote-core.c +29 -24
@@ -56,6 +56,8 @@ static enum power_supply_property wiimote_battery_props[] = { POWER_SUPPLY_PROP_SCOPE, }; +/* output queue handling */ +static ssize_t wiimote_hid_send (struct hid_device *hdev,__u8 *buffer,size_t count) {
@@ -75,24 +77,27 @@ static ssize_t wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,return ret; } -static void wiimote_worker (struct work_struct *work) +static void wiimote_queue_worker (struct work_struct *work) { - struct wiimote_data *wdata = container_of(work, struct wiimote_data, - worker); + struct wiimote_queue *queue = container_of(work, struct wiimote_queue, + worker); + struct wiimote_data *wdata = container_of(queue, struct wiimote_data, + queue);unsigned long flags; -spin_lock_irqsave (&wdata->qlock, flags); +spin_lock_irqsave (&wdata->queue.lock, flags); -while (wdata->head != wdata->tail) { -spin_unlock_irqrestore (&wdata->qlock, flags); -wiimote_hid_send (wdata->hdev, wdata->outq[wdata->tail].data, - wdata->outq[wdata->tail].size); -spin_lock_irqsave (&wdata->qlock, flags); +while (wdata->queue.head != wdata->queue.tail) { +spin_unlock_irqrestore (&wdata->queue.lock, flags); +wiimote_hid_send (wdata->hdev, + wdata->queue.outq[wdata->queue.tail].data, + wdata->queue.outq[wdata->queue.tail].size); +spin_lock_irqsave (&wdata->queue.lock, flags); - wdata->tail = (wdata->tail +1 ) %WIIMOTE_BUFSIZE ; + wdata->queue.tail = (wdata->queue.tail +1 ) %WIIMOTE_BUFSIZE ; } -spin_unlock_irqrestore (&wdata->qlock, flags); +spin_unlock_irqrestore (&wdata->queue.lock, flags); } static void wiimote_queue(struct wiimote_data *wdata, const __u8 *buffer,
@@ -116,22 +121,22 @@ static void wiimote_queue(struct wiimote_data *wdata, const __u8 *buffer,* will reschedule itself until the queue is empty. */ -spin_lock_irqsave (&wdata->qlock, flags); +spin_lock_irqsave (&wdata->queue.lock, flags); -memcpy (wdata->outq[wdata->head].data, buffer, count); - wdata->outq[wdata->head].size = count; - newhead = (wdata->head +1 ) %WIIMOTE_BUFSIZE ; +memcpy (wdata->queue.outq[wdata->queue.head].data, buffer, count); + wdata->queue.outq[wdata->queue.head].size = count; + newhead = (wdata->queue.head +1 ) %WIIMOTE_BUFSIZE ; -if (wdata->head == wdata->tail) { - wdata->head = newhead; -schedule_work (&wdata->worker); - }else if (newhead != wdata->tail) { - wdata->head = newhead; +if (wdata->queue.head == wdata->queue.tail) { + wdata->queue.head = newhead; +schedule_work (&wdata->queue.worker); + }else if (newhead != wdata->queue.tail) { + wdata->queue.head = newhead; }else {hid_warn (wdata->hdev,"Output queue is full" ); } -spin_unlock_irqrestore (&wdata->qlock, flags); +spin_unlock_irqrestore (&wdata->queue.lock, flags); }/*
@@ -1157,8 +1162,8 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev)input_set_abs_params (wdata->ir,ABS_HAT3X ,0 ,1023 ,2 ,4 );input_set_abs_params (wdata->ir,ABS_HAT3Y ,0 ,767 ,2 ,4 ); -spin_lock_init (&wdata->qlock); -INIT_WORK (&wdata->worker, wiimote_worker); +spin_lock_init (&wdata->queue.lock); +INIT_WORK (&wdata->queue.worker, wiimote_queue_worker);spin_lock_init (&wdata->state.lock);init_completion (&wdata->state.ready);
@@ -1187,7 +1192,7 @@ static void wiimote_destroy(struct wiimote_data *wdata)input_unregister_device (wdata->accel);input_unregister_device (wdata->ir);input_unregister_device (wdata->input); -cancel_work_sync (&wdata->worker); +cancel_work_sync (&wdata->queue.worker);hid_hw_stop (wdata->hdev);kfree (wdata);
drivers/hid/hid-wiimote.h +9 -6
@@ -48,6 +48,14 @@ struct wiimote_buf {size_t size; }; +struct wiimote_queue { +spinlock_t lock; +struct work_struct worker; +__u8 head; +__u8 tail; +struct wiimote_buf outq[WIIMOTE_BUFSIZE ]; +}; +struct wiimote_state {spinlock_t lock;__u8 flags;
@@ -77,12 +85,7 @@ struct wiimote_data {struct wiimote_ext *ext;struct wiimote_debug *debug; -spinlock_t qlock; -__u8 head; -__u8 tail; -struct wiimote_buf outq[WIIMOTE_BUFSIZE ]; -struct work_struct worker; - +struct wiimote_queue queue;struct wiimote_state state; };
Signature · 1 line
1.8.2.1
PATCH 3/21 HID: wiimote: keep HID device open
In reply to David HerrmannWe need constant I/O to keep the state up-to-date and not miss any packets. Hence, call hid_hw_open() during setup and hid_hw_close() during destruction.
These are no-ops for Bluetooth HIDP, but lets be safe.
--- drivers/hid/hid-wiimote-core.c | 48 ++++++++++-------------------------------- drivers/hid/hid-wiimote-ext.c | 12 ----------- 2 files changed, 11 insertions(+), 49 deletions(-)
drivers/hid/hid-wiimote-core.c +11 -37
@@ -626,30 +626,11 @@ static int wiimote_ff_play(struct input_dev *dev, void *data,return 0 ; } -static int wiimote_input_open (struct input_dev *dev) -{ -struct wiimote_data *wdata =input_get_drvdata (dev); - -return hid_hw_open (wdata->hdev); -} - -static void wiimote_input_close (struct input_dev *dev) -{ -struct wiimote_data *wdata =input_get_drvdata (dev); - -hid_hw_close (wdata->hdev); -} -static int wiimote_accel_open (struct input_dev *dev) {struct wiimote_data *wdata =input_get_drvdata (dev); -int ret;unsigned long flags; - ret =hid_hw_open (wdata->hdev); -if (ret) -return ret; -spin_lock_irqsave (&wdata->state.lock, flags);wiiproto_req_accel (wdata, true);spin_unlock_irqrestore (&wdata->state.lock, flags);
@@ -665,26 +646,13 @@ static void wiimote_accel_close(struct input_dev *dev)spin_lock_irqsave (&wdata->state.lock, flags);wiiproto_req_accel (wdata, false);spin_unlock_irqrestore (&wdata->state.lock, flags); - -hid_hw_close (wdata->hdev); }static int wiimote_ir_open (struct input_dev *dev) {struct wiimote_data *wdata =input_get_drvdata (dev); -int ret; - - ret =hid_hw_open (wdata->hdev); -if (ret) -return ret; - - ret =wiimote_init_ir (wdata,WIIPROTO_FLAG_IR_BASIC ); -if (ret) { -hid_hw_close (wdata->hdev); -return ret; - } -return 0 ; +return wiimote_init_ir (wdata,WIIPROTO_FLAG_IR_BASIC ); }static void wiimote_ir_close (struct input_dev *dev)
@@ -692,7 +660,6 @@ static void wiimote_ir_close(struct input_dev *dev)struct wiimote_data *wdata =input_get_drvdata (dev);wiimote_init_ir (wdata,0 ); -hid_hw_close (wdata->hdev); }static void handler_keys (struct wiimote_data *wdata,const __u8 *payload)
@@ -1091,8 +1058,6 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev)hid_set_drvdata (hdev, wdata);input_set_drvdata (wdata->input, wdata); - wdata->input->open = wiimote_input_open; - wdata->input->close = wiimote_input_close; wdata->input->dev.parent = &wdata->hdev->dev; wdata->input->id.bustype = wdata->hdev->bus; wdata->input->id.vendor = wdata->hdev->vendor;
@@ -1193,6 +1158,7 @@ static void wiimote_destroy(struct wiimote_data *wdata)input_unregister_device (wdata->ir);input_unregister_device (wdata->input);cancel_work_sync (&wdata->queue.worker); +hid_hw_close (wdata->hdev);hid_hw_stop (wdata->hdev);kfree (wdata);
@@ -1224,10 +1190,16 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err; } + ret =hid_hw_open (hdev); +if (ret) { +hid_err (hdev,"cannot start hardware I/O\n" ); + goto err_stop; + } + ret =input_register_device (wdata->accel);if (ret) {hid_err (hdev,"Cannot register input device\n" ); - goto err_stop; + goto err_close; } ret =input_register_device (wdata->ir);
@@ -1298,6 +1270,8 @@ err_input: err_ir:input_unregister_device (wdata->accel); wdata->accel =NULL ; +err_close: +hid_hw_close (hdev); err_stop:hid_hw_stop (hdev); err:
drivers/hid/hid-wiimote-ext.c +0 -12
@@ -661,11 +661,6 @@ static DEVICE_ATTR(extension, S_IRUGO, wiiext_show, NULL);static int wiiext_input_open (struct input_dev *dev) {struct wiimote_ext *ext =input_get_drvdata (dev); -int ret; - - ret =hid_hw_open (ext->wdata->hdev); -if (ret) -return ret;atomic_inc (&ext->opened);wiiext_schedule (ext);
@@ -679,17 +674,11 @@ static void wiiext_input_close(struct input_dev *dev)atomic_dec (&ext->opened);wiiext_schedule (ext); -hid_hw_close (ext->wdata->hdev); }static int wiiext_mp_open (struct input_dev *dev) {struct wiimote_ext *ext =input_get_drvdata (dev); -int ret; - - ret =hid_hw_open (ext->wdata->hdev); -if (ret) -return ret;atomic_inc (&ext->mp_opened);wiiext_schedule (ext);
@@ -703,7 +692,6 @@ static void wiiext_mp_close(struct input_dev *dev)atomic_dec (&ext->mp_opened);wiiext_schedule (ext); -hid_hw_close (ext->wdata->hdev); }/* Initializes the extension driver of a wiimote */
Signature · 1 line
1.8.2.1
PATCH 4/21 HID: wiimote: add device detection
In reply to David HerrmannNintendo produced many different devices that are internally based on the Wii Remote protocol but provide different peripherals. To support these devices, we need to schedule a device detection during initialization.
Device detection includes requesting a status report, reading extension information and then evaluating which device we may be dealing with.
We currently detect gen1 and gen2 Wii Remote devices. All other devices are marked as generic devices. More detections will be added later.
In followup patches we will be using these device IDs to control which peripherals to initialize. For instance if a device is known to have no IR camera, there is no need to provide the IR input device nor trying to access IR registers. In fact, there are 3rd party devices that break if we try things like this (hurray!).
The init_worker will be scheduled whenever we get hotplug events. This isn't implemented, yet and will be added later. However, we need to make sure that this worker can be called multiple times.
--- drivers/hid/hid-wiimote-core.c | 153 ++++++++++++++++++++++++++++++++++++++++- drivers/hid/hid-wiimote.h | 37 +++++++++- 2 files changed, 188 insertions(+), 2 deletions(-)
drivers/hid/hid-wiimote-core.c +152 -1
@@ -399,6 +399,45 @@ ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset, __u8 *rmem,return ret; } +/* requires the cmd-mutex to be held */ +static int wiimote_cmd_init_ext (struct wiimote_data *wdata) +{ +__u8 wmem; +int ret; + +/* initialize extension */ + wmem =0x55 ; + ret =wiimote_cmd_write (wdata,0xa400f0 , &wmem,sizeof (wmem)); +if (ret) +return ret; + +/* disable default encryption */ + wmem =0x0 ; + ret =wiimote_cmd_write (wdata,0xa400fb , &wmem,sizeof (wmem)); +if (ret) +return ret; + +return 0 ; +} + +/* requires the cmd-mutex to be held */ +static __u8 wiimote_cmd_read_ext (struct wiimote_data *wdata) +{ +__u8 rmem[6 ]; +int ret; + +/* read extension ID */ + ret =wiimote_cmd_read (wdata,0xa400fa , rmem,6 ); +if (ret !=6 ) +return WIIMOTE_EXT_NONE ; + +if (rmem[0 ] ==0xff && rmem[1 ] ==0xff && rmem[2 ] ==0xff && + rmem[3 ] ==0xff && rmem[4 ] ==0xff && rmem[5 ] ==0xff ) +return WIIMOTE_EXT_NONE ; + +return WIIMOTE_EXT_UNKNOWN ; +} +static int wiimote_battery_get_property (struct power_supply *psy,enum power_supply_property psp,union power_supply_propval *val)
@@ -662,6 +701,105 @@ static void wiimote_ir_close(struct input_dev *dev)wiimote_init_ir (wdata,0 ); } +/* device (re-)initialization and detection */ + +static const char *wiimote_devtype_names[WIIMOTE_DEV_NUM ] = { + [WIIMOTE_DEV_PENDING ] ="Pending" , + [WIIMOTE_DEV_UNKNOWN ] ="Unknown" , + [WIIMOTE_DEV_GENERIC ] ="Generic" , + [WIIMOTE_DEV_GEN10 ] ="Nintendo Wii Remote (Gen 1)" , + [WIIMOTE_DEV_GEN20 ] ="Nintendo Wii Remote Plus (Gen 2)" , +}; + +/* Try to guess the device type based on all collected information. We +* first try to detect by static extension types, then VID/PID and the +* device name. If we cannot detect the device, we use +* WIIMOTE_DEV_GENERIC so all modules will get probed on the device. */ +static void wiimote_init_set_type (struct wiimote_data *wdata, +__u8 exttype) +{ +__u8 devtype =WIIMOTE_DEV_GENERIC ; +__u16 vendor, product; +const char *name; + + vendor = wdata->hdev->vendor; + product = wdata->hdev->product; + name = wdata->hdev->name; + +if (vendor ==USB_VENDOR_ID_NINTENDO ) { +if (product ==USB_DEVICE_ID_NINTENDO_WIIMOTE ) { + devtype =WIIMOTE_DEV_GEN10 ; + goto done; + }else if (product ==USB_DEVICE_ID_NINTENDO_WIIMOTE2 ) { + devtype =WIIMOTE_DEV_GEN20 ; + goto done; + } + } + +if (!strcmp (name,"Nintendo RVL-CNT-01" )) { + devtype =WIIMOTE_DEV_GEN10 ; + goto done; + }else if (!strcmp (name,"Nintendo RVL-CNT-01-TR" )) { + devtype =WIIMOTE_DEV_GEN20 ; + goto done; + } + +done: +if (devtype ==WIIMOTE_DEV_GENERIC ) +hid_info (wdata->hdev,"cannot detect device; NAME: %s VID: %04x PID: %04x EXT: %04x\n" , + name, vendor, product, exttype); +else +hid_info (wdata->hdev,"detected device: %s\n" , + wiimote_devtype_names[devtype]); + +spin_lock_irq (&wdata->state.lock); + wdata->state.devtype = devtype; +spin_unlock_irq (&wdata->state.lock); +} + +static void wiimote_init_detect (struct wiimote_data *wdata) +{ +__u8 exttype =WIIMOTE_EXT_NONE ; +bool ext; +int ret; + +wiimote_cmd_acquire_noint (wdata); + +spin_lock_irq (&wdata->state.lock); +wiimote_cmd_set (wdata,WIIPROTO_REQ_SREQ ,0 ); +wiiproto_req_status (wdata); +spin_unlock_irq (&wdata->state.lock); + + ret =wiimote_cmd_wait_noint (wdata); +if (ret) + goto out_release; + +spin_lock_irq (&wdata->state.lock); + ext = wdata->state.flags &WIIPROTO_FLAG_EXT_PLUGGED ; +spin_unlock_irq (&wdata->state.lock); + +if (!ext) + goto out_release; + +wiimote_cmd_init_ext (wdata); + exttype =wiimote_cmd_read_ext (wdata); + +out_release: +wiimote_cmd_release (wdata); +wiimote_init_set_type (wdata, exttype); +} + +static void wiimote_init_worker (struct work_struct *work) +{ + struct wiimote_data *wdata = container_of(work, struct wiimote_data, + init_worker); + +if (wdata->state.devtype ==WIIMOTE_DEV_PENDING ) +wiimote_init_detect (wdata); +} + +/* protocol handlers */ +static void handler_keys (struct wiimote_data *wdata,const __u8 *payload) { input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_LEFT],
@@ -776,7 +914,14 @@ static void handler_status(struct wiimote_data *wdata, const __u8 *payload) {handler_status_K (wdata, payload); -wiiext_event (wdata, payload[2 ] &0x02 ); +/* update extension status */ +if (payload[2 ] &0x02 ) { + wdata->state.flags |=WIIPROTO_FLAG_EXT_PLUGGED ; +wiiext_event (wdata, true); + }else { + wdata->state.flags &= ~WIIPROTO_FLAG_EXT_PLUGGED ; +wiiext_event (wdata, false); + }if (wiimote_cmd_pending (wdata,WIIPROTO_REQ_SREQ ,0 )) { wdata->state.cmd_battery = payload[5 ];
@@ -1135,6 +1280,8 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev)mutex_init (&wdata->state.sync); wdata->state.drm =WIIPROTO_REQ_DRM_K ; +INIT_WORK (&wdata->init_worker, wiimote_init_worker); +return wdata; err_ir:
@@ -1157,6 +1304,7 @@ static void wiimote_destroy(struct wiimote_data *wdata)input_unregister_device (wdata->accel);input_unregister_device (wdata->ir);input_unregister_device (wdata->input); +cancel_work_sync (&wdata->init_worker);cancel_work_sync (&wdata->queue.worker);hid_hw_close (wdata->hdev);hid_hw_stop (wdata->hdev);
@@ -1253,6 +1401,9 @@ static int wiimote_hid_probe(struct hid_device *hdev,wiiproto_req_leds (wdata,WIIPROTO_FLAG_LED1 );spin_unlock_irq (&wdata->state.lock); +/* schedule device detection */ +schedule_work (&wdata->init_worker); +return 0 ; err_free:
drivers/hid/hid-wiimote.h +36 -1
@@ -35,6 +35,8 @@#define WIIPROTO_FLAG_IR_BASIC 0x40#define WIIPROTO_FLAG_IR_EXT 0x80#define WIIPROTO_FLAG_IR_FULL 0xc0/* IR_BASIC | IR_EXT */ +#define WIIPROTO_FLAG_EXT_PLUGGED 0x0100 +#define WIIPROTO_FLAGS_LEDS (WIIPROTO_FLAG_LED1 | WIIPROTO_FLAG_LED2 | \ WIIPROTO_FLAG_LED3 | WIIPROTO_FLAG_LED4)#define WIIPROTO_FLAGS_IR (WIIPROTO_FLAG_IR_BASIC | WIIPROTO_FLAG_IR_EXT | \
@@ -43,6 +45,21 @@/* return flag for led \num */ #define WIIPROTO_FLAG_LED (num) (WIIPROTO_FLAG_LED1 << (num - 1)) +enum wiimote_devtype { +WIIMOTE_DEV_PENDING , +WIIMOTE_DEV_UNKNOWN , +WIIMOTE_DEV_GENERIC , +WIIMOTE_DEV_GEN10 , +WIIMOTE_DEV_GEN20 , +WIIMOTE_DEV_NUM , +}; + +enum wiimote_exttype { +WIIMOTE_EXT_NONE , +WIIMOTE_EXT_UNKNOWN , +WIIMOTE_EXT_NUM , +}; +struct wiimote_buf {__u8 data[HID_MAX_BUFFER_SIZE ];size_t size;
@@ -58,9 +75,10 @@ struct wiimote_queue {struct wiimote_state {spinlock_t lock; -__u8 flags; +__u16 flags;__u8 accel_split[2 ];__u8 drm; +__u8 devtype;/* synchronous cmd requests */ struct mutex sync;
@@ -87,6 +105,7 @@ struct wiimote_data {struct wiimote_queue queue;struct wiimote_state state; +struct work_struct init_worker; };enum wiiproto_reqs {
@@ -181,6 +200,11 @@ static inline int wiimote_cmd_acquire(struct wiimote_data *wdata)return mutex_lock_interruptible (&wdata->state.sync) ? -ERESTARTSYS :0 ; } +static inline void wiimote_cmd_acquire_noint (struct wiimote_data *wdata) +{ +mutex_lock (&wdata->state.sync); +} +/* requires the state.lock spinlock to be held */ static inline void wiimote_cmd_set (struct wiimote_data *wdata,int cmd,__u32 opt)
@@ -208,4 +232,15 @@ static inline int wiimote_cmd_wait(struct wiimote_data *wdata) return 0; } +static inline int wiimote_cmd_wait_noint (struct wiimote_data *wdata) +{ +unsigned long ret; + + ret =wait_for_completion_timeout (&wdata->state.ready,HZ ); +if (!ret) +return -EIO ; +else +return 0 ; +} +#endif
Signature · 1 line
1.8.2.1
PATCH 5/21 HID: wiimote: use cached battery values on I/O failure
In reply to David HerrmannBattery reports are sent along every status report of the Wii Remote. So chances are pretty high that we have an up-to-date battery cache at any time. Therefore, initialize the battery-cache to 100% and then return battery values from the cache if the query fails.
This works around a power_supply limitation in that it requires us to be able to query the device during power_supply registration and removal. Otherwise, "add" or "remove" udev events are not sent. If we answer these requests from our cache instead, we avoid dropping these events and no longer cause warnings printed.
--- drivers/hid/hid-wiimote-core.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/hid/hid-wiimote-core.c +7 -7
@@ -461,12 +461,12 @@ static int wiimote_battery_get_property(struct power_supply *psy,wiiproto_req_status (wdata);spin_unlock_irqrestore (&wdata->state.lock, flags); - ret =wiimote_cmd_wait (wdata); - state = wdata->state.cmd_battery; +wiimote_cmd_wait (wdata);wiimote_cmd_release (wdata); -if (ret) -return ret; +spin_lock_irqsave (&wdata->state.lock, flags); + state = wdata->state.cmd_battery; +spin_unlock_irqrestore (&wdata->state.lock, flags);switch (psp) {case POWER_SUPPLY_PROP_CAPACITY :
@@ -923,10 +923,9 @@ static void handler_status(struct wiimote_data *wdata, const __u8 *payload)wiiext_event (wdata, false); } -if (wiimote_cmd_pending (wdata,WIIPROTO_REQ_SREQ ,0 )) { - wdata->state.cmd_battery = payload[5 ]; + wdata->state.cmd_battery = payload[5 ]; +if (wiimote_cmd_pending (wdata,WIIPROTO_REQ_SREQ ,0 ))wiimote_cmd_complete (wdata); - } }/* reduced generic report with "BB BB" key data only */
@@ -1279,6 +1278,7 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev)init_completion (&wdata->state.ready);mutex_init (&wdata->state.sync); wdata->state.drm =WIIPROTO_REQ_DRM_K ; + wdata->state.cmd_battery =0xff ;INIT_WORK (&wdata->init_worker, wiimote_init_worker);
Signature · 1 line
1.8.2.1
PATCH 6/21 HID: wiimote: wake up if output queue failed
In reply to David HerrmannOur output queue is asynchronous but synchronous reports may wait for a response to their request. Therefore, wake them up unconditionally if an output report couldn't be sent. But keep the report ID intact so we don't incorrectly assume our request succeeded.
Note that the underlying connection is required to be reliable and does retransmission itself. So it is safe to assume that if the transmission fails, the device is in inconsistent state. Hence, we abort every request if any output report fails. No need to verify which report failed.
--- drivers/hid/hid-wiimote-core.c | 24 +++++++++++++++++++----- drivers/hid/hid-wiimote.h | 19 +++++++++++++++++++ 2 files changed, 38 insertions(+), 5 deletions(-)
drivers/hid/hid-wiimote-core.c +19 -5
@@ -58,11 +58,11 @@ static enum power_supply_property wiimote_battery_props[] = {/* output queue handling */ -static ssize_t wiimote_hid_send (struct hid_device *hdev,__u8 *buffer, -size_t count) +static int wiimote_hid_send (struct hid_device *hdev,__u8 *buffer, +size_t count) {__u8 *buf; -ssize_t ret; +int ret;if (!hdev->hid_output_raw_report)return -ENODEV ;
@@ -84,14 +84,20 @@ static void wiimote_queue_worker(struct work_struct *work) struct wiimote_data *wdata = container_of(queue, struct wiimote_data, queue);unsigned long flags; +int ret;spin_lock_irqsave (&wdata->queue.lock, flags);while (wdata->queue.head != wdata->queue.tail) {spin_unlock_irqrestore (&wdata->queue.lock, flags); -wiimote_hid_send (wdata->hdev, + ret =wiimote_hid_send (wdata->hdev, wdata->queue.outq[wdata->queue.tail].data, wdata->queue.outq[wdata->queue.tail].size); +if (ret <0 ) { +spin_lock_irqsave (&wdata->state.lock, flags); +wiimote_cmd_abort (wdata); +spin_unlock_irqrestore (&wdata->state.lock, flags); + }spin_lock_irqsave (&wdata->queue.lock, flags); wdata->queue.tail = (wdata->queue.tail +1 ) %WIIMOTE_BUFSIZE ;
@@ -108,7 +114,9 @@ static void wiimote_queue(struct wiimote_data *wdata, const __u8 *buffer,if (count >HID_MAX_BUFFER_SIZE ) {hid_warn (wdata->hdev,"Sending too large output report\n" ); -return ; + +spin_lock_irqsave (&wdata->queue.lock, flags); + goto out_error; }/*
@@ -134,8 +142,14 @@ static void wiimote_queue(struct wiimote_data *wdata, const __u8 *buffer, wdata->queue.head = newhead; }else {hid_warn (wdata->hdev,"Output queue is full" ); + goto out_error; } + goto out_unlock; + +out_error: +wiimote_cmd_abort (wdata); +out_unlock:spin_unlock_irqrestore (&wdata->queue.lock, flags); }
drivers/hid/hid-wiimote.h +19 -0
@@ -195,6 +195,16 @@ static inline void wiimote_cmd_complete(struct wiimote_data *wdata)complete (&wdata->state.ready); } +/* requires the state.lock spinlock to be held */ +static inline void wiimote_cmd_abort (struct wiimote_data *wdata) +{ +/* Abort synchronous request by waking up the sleeping caller. But +* reset the state.cmd field to an invalid value so no further event +* handlers will work with it. */ + wdata->state.cmd =WIIPROTO_REQ_MAX ; +complete (&wdata->state.ready); +} +static inline int wiimote_cmd_acquire (struct wiimote_data *wdata) {return mutex_lock_interruptible (&wdata->state.sync) ? -ERESTARTSYS :0 ;
@@ -223,11 +233,17 @@ static inline int wiimote_cmd_wait(struct wiimote_data *wdata) {int ret; +/* The completion acts as implicit memory barrier so we can safely +* assume that state.cmd is set on success/failure and isn't accessed +* by any other thread, anymore. */ + ret =wait_for_completion_interruptible_timeout (&wdata->state.ready,HZ );if (ret <0 )return -ERESTARTSYS ;else if (ret ==0 )return -EIO ; +else if (wdata->state.cmd !=WIIPROTO_REQ_NULL ) +return -EIO ;else return 0 ; }
@@ -236,9 +252,12 @@ static inline int wiimote_cmd_wait_noint(struct wiimote_data *wdata) {unsigned long ret; +/* no locking needed; see wiimote_cmd_wait() */ ret =wait_for_completion_timeout (&wdata->state.ready,HZ );if (!ret)return -EIO ; +else if (wdata->state.cmd !=WIIPROTO_REQ_NULL ) +return -EIO ;else return 0 ; }
Signature · 1 line
1.8.2.1
PATCH 7/21 HID: wiimote: add sub-device module infrastructure
In reply to David HerrmannTo avoid loading all sub-device drivers for every Wii Remote, even though the required hardware might not be available, we introduce a module layer.
The module layer specifies which sub-devices are available on each device-type. After device detection, we only load the modules for the detected device. If module loading fails, we unload everything and mark the device as WIIMOTE_DEV_UNKNOWN. As long as a device is marked as "unknown", no sub-devices will be used and the device is considered unsupported.
All the different sub-devices, including KEYS, RUMBLE, BATTERY, LEDS, ACCELEROMETER, IR and more will be ported in follow-up patches to the new module layer.
--- drivers/hid/Makefile | 2 +- drivers/hid/hid-wiimote-core.c | 124 +++++++++++++++++++++++++++++++++++++- drivers/hid/hid-wiimote-modules.c | 45 ++++++++++++++ drivers/hid/hid-wiimote.h | 27 +++++++++ 4 files changed, 194 insertions(+), 4 deletions(-) create mode 100644 drivers/hid/hid-wiimote-modules.c
drivers/hid/Makefile +1 -1
@@ -28,7 +28,7 @@ ifdef CONFIG_LOGIWHEELS_FF hid-logitech-y += hid-lg4ff.o endif -hid-wiimote-y := hid-wiimote-core.o +hid-wiimote-y := hid-wiimote-core.o hid-wiimote-modules.o ifdef CONFIG_HID_WIIMOTE_EXT hid-wiimote-y += hid-wiimote-ext.o endif
drivers/hid/hid-wiimote-core.c +121 -3
148 lines not on this page · raw message
drivers/hid/hid-wiimote-modules.c new file +45 -0
45 lines not on this page · raw message
drivers/hid/hid-wiimote.h +27 -0
@@ -108,6 +108,33 @@ struct wiimote_data {struct work_struct init_worker; }; +/* wiimote modules */ + +enum wiimod_module { +WIIMOD_NUM , +WIIMOD_NULL =WIIMOD_NUM , +}; + +#define WIIMOD_FLAG_INPUT 0x0001 + +struct wiimod_ops { +__u16 flags; +unsigned long arg; +int (*probe) (const struct wiimod_ops *ops, +struct wiimote_data *wdata); +void (*remove) (const struct wiimod_ops *ops, +struct wiimote_data *wdata); + +void (*in_keys) (struct wiimote_data *wdata,const __u8 *keys); +void (*in_accel) (struct wiimote_data *wdata,const __u8 *accel); +void (*in_ir) (struct wiimote_data *wdata,const __u8 *ir,bool packed, +unsigned int id); +}; + +extern const struct wiimod_ops *wiimod_table[WIIMOD_NUM ]; + +/* wiimote requests */ +enum wiiproto_reqs {WIIPROTO_REQ_NULL =0x0 ,WIIPROTO_REQ_RUMBLE =0x10 ,
Signature · 1 line
1.8.2.1
PATCH 8/21 HID: wiimote: convert KEYS and RUMBLE to modules
In reply to David HerrmannThis introduces the first sub-device modules by converting the KEYS and RUMBLE sub-devices into wiimote modules. Both must be converted at once because they depend on the built-in shared input device.
This mostly moves code from wiimote-core to wiimote-modules and doesn't change any semantics or ABI.
--- drivers/hid/hid-wiimote-core.c | 134 ++++++-------------------------------- drivers/hid/hid-wiimote-modules.c | 134 ++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 18 +++++ 3 files changed, 172 insertions(+), 114 deletions(-)
drivers/hid/hid-wiimote-core.c +20 -114
@@ -22,35 +22,6 @@#include "hid-ids.h" #include "hid-wiimote.h" -enum wiiproto_keys { -WIIPROTO_KEY_LEFT , -WIIPROTO_KEY_RIGHT , -WIIPROTO_KEY_UP , -WIIPROTO_KEY_DOWN , -WIIPROTO_KEY_PLUS , -WIIPROTO_KEY_MINUS , -WIIPROTO_KEY_ONE , -WIIPROTO_KEY_TWO , -WIIPROTO_KEY_A , -WIIPROTO_KEY_B , -WIIPROTO_KEY_HOME , -WIIPROTO_KEY_COUNT -}; - -static __u16 wiiproto_keymap[] = { -KEY_LEFT ,/* WIIPROTO_KEY_LEFT */ -KEY_RIGHT ,/* WIIPROTO_KEY_RIGHT */ -KEY_UP ,/* WIIPROTO_KEY_UP */ -KEY_DOWN ,/* WIIPROTO_KEY_DOWN */ -KEY_NEXT ,/* WIIPROTO_KEY_PLUS */ -KEY_PREVIOUS ,/* WIIPROTO_KEY_MINUS */ -BTN_1 ,/* WIIPROTO_KEY_ONE */ -BTN_2 ,/* WIIPROTO_KEY_TWO */ -BTN_A ,/* WIIPROTO_KEY_A */ -BTN_B ,/* WIIPROTO_KEY_B */ -BTN_MODE ,/* WIIPROTO_KEY_HOME */ -}; -static enum power_supply_property wiimote_battery_props[] = {POWER_SUPPLY_PROP_CAPACITY ,POWER_SUPPLY_PROP_SCOPE ,
@@ -166,7 +137,7 @@ static inline void wiiproto_keep_rumble(struct wiimote_data *wdata, __u8 *cmd1) *cmd1 |=0x01 ; } -static void wiiproto_req_rumble (struct wiimote_data *wdata,__u8 rumble) +void wiiproto_req_rumble (struct wiimote_data *wdata,__u8 rumble) {__u8 cmd[2 ];
@@ -654,31 +625,6 @@ static void wiimote_leds_set(struct led_classdev *led_dev, } } -static int wiimote_ff_play (struct input_dev *dev,void *data, -struct ff_effect *eff) -{ -struct wiimote_data *wdata =input_get_drvdata (dev); -__u8 value; -unsigned long flags; - -/* -* The wiimote supports only a single rumble motor so if any magnitude -* is set to non-zero then we start the rumble motor. If both are set to -* zero, we stop the rumble motor. -*/ - -if (eff->u.rumble.strong_magnitude || eff->u.rumble.weak_magnitude) - value =1 ; -else - value =0 ; - -spin_lock_irqsave (&wdata->state.lock, flags); -wiiproto_req_rumble (wdata, value); -spin_unlock_irqrestore (&wdata->state.lock, flags); - -return 0 ; -} -static int wiimote_accel_open (struct input_dev *dev) {struct wiimote_data *wdata =input_get_drvdata (dev);
@@ -725,12 +671,18 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = { WIIMOD_NULL, }, [WIIMOTE_DEV_GENERIC ] = (const __u8 []){ +WIIMOD_KEYS , +WIIMOD_RUMBLE ,WIIMOD_NULL , }, [WIIMOTE_DEV_GEN10 ] = (const __u8 []){ +WIIMOD_KEYS , +WIIMOD_RUMBLE ,WIIMOD_NULL , }, [WIIMOTE_DEV_GEN20 ] = (const __u8 []){ +WIIMOD_KEYS , +WIIMOD_RUMBLE ,WIIMOD_NULL , }, };
@@ -933,29 +885,17 @@ static void wiimote_init_worker(struct work_struct *work)static void handler_keys (struct wiimote_data *wdata,const __u8 *payload) { -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_LEFT ], - !!(payload[0 ] &0x01 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_RIGHT ], - !!(payload[0 ] &0x02 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_DOWN ], - !!(payload[0 ] &0x04 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_UP ], - !!(payload[0 ] &0x08 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_PLUS ], - !!(payload[0 ] &0x10 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_TWO ], - !!(payload[1 ] &0x01 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_ONE ], - !!(payload[1 ] &0x02 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_B ], - !!(payload[1 ] &0x04 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_A ], - !!(payload[1 ] &0x08 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_MINUS ], - !!(payload[1 ] &0x10 )); -input_report_key (wdata->input, wiiproto_keymap[WIIPROTO_KEY_HOME ], - !!(payload[1 ] &0x80 )); -input_sync (wdata->input); +const __u8 *iter, *mods; +const struct wiimod_ops *ops; + + mods = wiimote_devtype_mods[wdata->state.devtype]; +for (iter = mods; *iter !=WIIMOD_NULL ; ++iter) { + ops = wiimod_table[*iter]; +if (ops->in_keys) { + ops->in_keys (wdata, payload); +break ; + } + } }static void handler_accel (struct wiimote_data *wdata,const __u8 *payload)
@@ -1319,38 +1259,17 @@ err:static struct wiimote_data *wiimote_create (struct hid_device *hdev) {struct wiimote_data *wdata; -int i; wdata =kzalloc (sizeof (*wdata),GFP_KERNEL );if (!wdata)return NULL ; - wdata->input =input_allocate_device (); -if (!wdata->input) - goto err; - wdata->hdev = hdev;hid_set_drvdata (hdev, wdata); -input_set_drvdata (wdata->input, wdata); - wdata->input->dev.parent = &wdata->hdev->dev; - wdata->input->id.bustype = wdata->hdev->bus; - wdata->input->id.vendor = wdata->hdev->vendor; - wdata->input->id.product = wdata->hdev->product; - wdata->input->id.version = wdata->hdev->version; - wdata->input->name =WIIMOTE_NAME ; - -set_bit (EV_KEY , wdata->input->evbit); -for (i =0 ; i <WIIPROTO_KEY_COUNT ; ++i) -set_bit (wiiproto_keymap[i], wdata->input->keybit); - -set_bit (FF_RUMBLE , wdata->input->ffbit); -if (input_ff_create_memless (wdata->input,NULL , wiimote_ff_play)) - goto err_input; - wdata->accel =input_allocate_device ();if (!wdata->accel) - goto err_input; + goto err;input_set_drvdata (wdata->accel, wdata); wdata->accel->open = wiimote_accel_open;
@@ -1417,8 +1336,6 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev) err_ir:input_free_device (wdata->accel); -err_input: -input_free_device (wdata->input); err:kfree (wdata);return NULL ;
@@ -1430,13 +1347,12 @@ static void wiimote_destroy(struct wiimote_data *wdata)wiiext_deinit (wdata);wiimote_leds_destroy (wdata); +cancel_work_sync (&wdata->init_worker);wiimote_modules_unload (wdata);power_supply_unregister (&wdata->battery);kfree (wdata->battery.name);input_unregister_device (wdata->accel);input_unregister_device (wdata->ir); -input_unregister_device (wdata->input); -cancel_work_sync (&wdata->init_worker);cancel_work_sync (&wdata->queue.worker);hid_hw_close (wdata->hdev);hid_hw_stop (wdata->hdev);
@@ -1488,12 +1404,6 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_ir; } - ret =input_register_device (wdata->input); -if (ret) { -hid_err (hdev,"Cannot register input device\n" ); - goto err_input; - } - wdata->battery.properties = wiimote_battery_props; wdata->battery.num_properties =ARRAY_SIZE (wiimote_battery_props); wdata->battery.get_property = wiimote_battery_get_property;
@@ -1545,9 +1455,6 @@ err_free: err_battery:kfree (wdata->battery.name); err_battery_name: -input_unregister_device (wdata->input); - wdata->input =NULL ; -err_input:input_unregister_device (wdata->ir); wdata->ir =NULL ; err_ir:
@@ -1560,7 +1467,6 @@ err_stop: err:input_free_device (wdata->ir);input_free_device (wdata->accel); -input_free_device (wdata->input);kfree (wdata);return ret; }
drivers/hid/hid-wiimote-modules.c +134 -0
141 lines not on this page · raw message
drivers/hid/hid-wiimote.h +18 -0
@@ -45,6 +45,21 @@/* return flag for led \num */ #define WIIPROTO_FLAG_LED (num) (WIIPROTO_FLAG_LED1 << (num - 1)) +enum wiiproto_keys { +WIIPROTO_KEY_LEFT , +WIIPROTO_KEY_RIGHT , +WIIPROTO_KEY_UP , +WIIPROTO_KEY_DOWN , +WIIPROTO_KEY_PLUS , +WIIPROTO_KEY_MINUS , +WIIPROTO_KEY_ONE , +WIIPROTO_KEY_TWO , +WIIPROTO_KEY_A , +WIIPROTO_KEY_B , +WIIPROTO_KEY_HOME , +WIIPROTO_KEY_COUNT +}; +enum wiimote_devtype {WIIMOTE_DEV_PENDING ,WIIMOTE_DEV_UNKNOWN ,
@@ -111,6 +126,8 @@ struct wiimote_data {/* wiimote modules */ enum wiimod_module { +WIIMOD_KEYS , +WIIMOD_RUMBLE ,WIIMOD_NUM ,WIIMOD_NULL =WIIMOD_NUM , };
@@ -166,6 +183,7 @@ enum wiiproto_reqs { dev)) extern void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm); +extern void wiiproto_req_rumble (struct wiimote_data *wdata,__u8 rumble);extern int wiimote_cmd_write (struct wiimote_data *wdata,__u32 offset,const __u8 *wmem,__u8 size); extern ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset,
Signature · 1 line
1.8.2.1
PATCH 9/21 HID: wiimote: convert BATTERY to module
In reply to David HerrmannThis introduces a new sub-device module for the BATTERY handlers. It moves the whole power_supply battery handling over to wiimote-modules.
This doesn't change any semantics or ABI but only converts the battery handling into a sub-device module.
--- drivers/hid/hid-wiimote-core.c | 80 ++------------------------------ drivers/hid/hid-wiimote-modules.c | 98 +++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 2 + 3 files changed, 104 insertions(+), 76 deletions(-)
drivers/hid/hid-wiimote-core.c +4 -76
@@ -17,16 +17,10 @@#include <linux/leds.h> #include <linux/module.h> #include <linux/mutex.h> -#include <linux/power_supply.h> #include <linux/spinlock.h> #include "hid-ids.h" #include "hid-wiimote.h" -static enum power_supply_property wiimote_battery_props[] = { -POWER_SUPPLY_PROP_CAPACITY , -POWER_SUPPLY_PROP_SCOPE , -}; -/* output queue handling */ static int wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,
@@ -232,7 +226,7 @@ void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm)wiimote_queue (wdata, cmd,sizeof (cmd)); } -static void wiiproto_req_status (struct wiimote_data *wdata) +void wiiproto_req_status (struct wiimote_data *wdata) {__u8 cmd[2 ];
@@ -423,48 +417,6 @@ static __u8 wiimote_cmd_read_ext(struct wiimote_data *wdata)return WIIMOTE_EXT_UNKNOWN ; } -static int wiimote_battery_get_property (struct power_supply *psy, -enum power_supply_property psp, -union power_supply_propval *val) -{ -struct wiimote_data *wdata =container_of (psy, - struct wiimote_data, battery); -int ret =0 , state; -unsigned long flags; - -if (psp ==POWER_SUPPLY_PROP_SCOPE ) { - val->intval =POWER_SUPPLY_SCOPE_DEVICE ; -return 0 ; - } - - ret =wiimote_cmd_acquire (wdata); -if (ret) -return ret; - -spin_lock_irqsave (&wdata->state.lock, flags); -wiimote_cmd_set (wdata,WIIPROTO_REQ_SREQ ,0 ); -wiiproto_req_status (wdata); -spin_unlock_irqrestore (&wdata->state.lock, flags); - -wiimote_cmd_wait (wdata); -wiimote_cmd_release (wdata); - -spin_lock_irqsave (&wdata->state.lock, flags); - state = wdata->state.cmd_battery; -spin_unlock_irqrestore (&wdata->state.lock, flags); - -switch (psp) { -case POWER_SUPPLY_PROP_CAPACITY : - val->intval = state *100 /255 ; -break ; -default : - ret = -EINVAL ; -break ; - } - -return ret; -} -static int wiimote_init_ir (struct wiimote_data *wdata,__u16 mode) {int ret;
@@ -673,16 +625,19 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = { [WIIMOTE_DEV_GENERIC ] = (const __u8 []){WIIMOD_KEYS ,WIIMOD_RUMBLE , +WIIMOD_BATTERY ,WIIMOD_NULL , }, [WIIMOTE_DEV_GEN10 ] = (const __u8 []){WIIMOD_KEYS ,WIIMOD_RUMBLE , +WIIMOD_BATTERY ,WIIMOD_NULL , }, [WIIMOTE_DEV_GEN20 ] = (const __u8 []){WIIMOD_KEYS ,WIIMOD_RUMBLE , +WIIMOD_BATTERY ,WIIMOD_NULL , }, };
@@ -1349,8 +1304,6 @@ static void wiimote_destroy(struct wiimote_data *wdata)cancel_work_sync (&wdata->init_worker);wiimote_modules_unload (wdata); -power_supply_unregister (&wdata->battery); -kfree (wdata->battery.name);input_unregister_device (wdata->accel);input_unregister_device (wdata->ir);cancel_work_sync (&wdata->queue.worker);
@@ -1404,26 +1357,6 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_ir; } - wdata->battery.properties = wiimote_battery_props; - wdata->battery.num_properties =ARRAY_SIZE (wiimote_battery_props); - wdata->battery.get_property = wiimote_battery_get_property; - wdata->battery.type =POWER_SUPPLY_TYPE_BATTERY ; - wdata->battery.use_for_apm =0 ; - wdata->battery.name =kasprintf (GFP_KERNEL ,"wiimote_battery_%s" , - wdata->hdev->uniq); -if (!wdata->battery.name) { - ret = -ENOMEM ; - goto err_battery_name; - } - - ret =power_supply_register (&wdata->hdev->dev, &wdata->battery); -if (ret) { -hid_err (hdev,"Cannot register battery device\n" ); - goto err_battery; - } - -power_supply_powers (&wdata->battery, &hdev->dev); - ret =wiimote_leds_create (wdata);if (ret) goto err_free;
@@ -1452,11 +1385,6 @@ err_free:wiimote_destroy (wdata);return ret; -err_battery: -kfree (wdata->battery.name); -err_battery_name: -input_unregister_device (wdata->ir); - wdata->ir =NULL ; err_ir:input_unregister_device (wdata->accel); wdata->accel =NULL ;
drivers/hid/hid-wiimote-modules.c +98 -0
107 lines not on this page · raw message
drivers/hid/hid-wiimote.h +2 -0
@@ -128,6 +128,7 @@ struct wiimote_data {enum wiimod_module {WIIMOD_KEYS ,WIIMOD_RUMBLE , +WIIMOD_BATTERY ,WIIMOD_NUM ,WIIMOD_NULL =WIIMOD_NUM , };
@@ -184,6 +185,7 @@ enum wiiproto_reqs {extern void wiiproto_req_drm (struct wiimote_data *wdata,__u8 drm);extern void wiiproto_req_rumble (struct wiimote_data *wdata,__u8 rumble); +extern void wiiproto_req_status (struct wiimote_data *wdata);extern int wiimote_cmd_write (struct wiimote_data *wdata,__u32 offset,const __u8 *wmem,__u8 size); extern ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset,
Signature · 1 line
1.8.2.1
PATCH 10/21 HID: wiimote: convert LEDS to modules
In reply to David HerrmannEach of the 4 LEDs may be supported individually by devices. Therefore, we need one module for each device. To avoid code-duplication, we simply pass the LED ID as "arg" argument to the module loading code.
This just moves the coder over to wiimote-module. The semantics stay the same as before.
--- drivers/hid/hid-wiimote-core.c | 125 ++++------------------------------ drivers/hid/hid-wiimote-modules.c | 140 ++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 5 ++ 3 files changed, 158 insertions(+), 112 deletions(-)
drivers/hid/hid-wiimote-core.c +13 -112
@@ -14,7 +14,6 @@#include <linux/device.h> #include <linux/hid.h> #include <linux/input.h> -#include <linux/leds.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/spinlock.h>
@@ -151,7 +150,7 @@ void wiiproto_req_rumble(struct wiimote_data *wdata, __u8 rumble)wiimote_queue (wdata, cmd,sizeof (cmd)); } -static void wiiproto_req_leds (struct wiimote_data *wdata,int leds) +void wiiproto_req_leds (struct wiimote_data *wdata,int leds) {__u8 cmd[2 ];
@@ -529,54 +528,6 @@ unlock:return ret; } -static enum led_brightness wiimote_leds_get (struct led_classdev *led_dev) -{ -struct wiimote_data *wdata; -struct device *dev = led_dev->dev->parent; -int i; -unsigned long flags; -bool value = false; - - wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev)); - -for (i =0 ; i <4 ; ++i) { -if (wdata->leds[i] == led_dev) { -spin_lock_irqsave (&wdata->state.lock, flags); - value = wdata->state.flags &WIIPROTO_FLAG_LED (i +1 ); -spin_unlock_irqrestore (&wdata->state.lock, flags); -break ; - } - } - -return value ?LED_FULL :LED_OFF ; -} - -static void wiimote_leds_set (struct led_classdev *led_dev, -enum led_brightness value) -{ -struct wiimote_data *wdata; -struct device *dev = led_dev->dev->parent; -int i; -unsigned long flags; -__u8 state, flag; - - wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev)); - -for (i =0 ; i <4 ; ++i) { -if (wdata->leds[i] == led_dev) { - flag =WIIPROTO_FLAG_LED (i +1 ); -spin_lock_irqsave (&wdata->state.lock, flags); - state = wdata->state.flags; -if (value ==LED_OFF ) -wiiproto_req_leds (wdata, state & ~flag); -else -wiiproto_req_leds (wdata, state | flag); -spin_unlock_irqrestore (&wdata->state.lock, flags); -break ; - } - } -} -static int wiimote_accel_open (struct input_dev *dev) {struct wiimote_data *wdata =input_get_drvdata (dev);
@@ -626,18 +577,30 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = { WIIMOD_KEYS,WIIMOD_RUMBLE ,WIIMOD_BATTERY , +WIIMOD_LED1 , +WIIMOD_LED2 , +WIIMOD_LED3 , +WIIMOD_LED4 ,WIIMOD_NULL , }, [WIIMOTE_DEV_GEN10] = (const __u8[]){WIIMOD_KEYS ,WIIMOD_RUMBLE ,WIIMOD_BATTERY , +WIIMOD_LED1 , +WIIMOD_LED2 , +WIIMOD_LED3 , +WIIMOD_LED4 ,WIIMOD_NULL , }, [WIIMOTE_DEV_GEN20 ] = (const __u8 []){WIIMOD_KEYS ,WIIMOD_RUMBLE ,WIIMOD_BATTERY , +WIIMOD_LED1 , +WIIMOD_LED2 , +WIIMOD_LED3 , +WIIMOD_LED4 ,WIIMOD_NULL , }, };
@@ -1159,58 +1122,6 @@ static int wiimote_hid_event(struct hid_device *hdev, struct hid_report *report,return 0 ; } -static void wiimote_leds_destroy (struct wiimote_data *wdata) -{ -int i; -struct led_classdev *led; - -for (i =0 ; i <4 ; ++i) { -if (wdata->leds[i]) { - led = wdata->leds[i]; - wdata->leds[i] =NULL ; -led_classdev_unregister (led); -kfree (led); - } - } -} - -static int wiimote_leds_create (struct wiimote_data *wdata) -{ -int i, ret; -struct device *dev = &wdata->hdev->dev; -size_t namesz =strlen (dev_name (dev)) +9 ; -struct led_classdev *led; -char *name; - -for (i =0 ; i <4 ; ++i) { - led =kzalloc (sizeof (struct led_classdev ) + namesz,GFP_KERNEL ); -if (!led) { - ret = -ENOMEM ; - goto err; - } - name = (void *)&led[1 ]; -snprintf (name, namesz,"%s:blue:p%d" ,dev_name (dev), i); - led->name = name; - led->brightness =0 ; - led->max_brightness =1 ; - led->brightness_get = wiimote_leds_get; - led->brightness_set = wiimote_leds_set; - - ret =led_classdev_register (dev, led); -if (ret) { -kfree (led); - goto err; - } - wdata->leds[i] = led; - } - -return 0 ; - -err: -wiimote_leds_destroy (wdata); -return ret; -} -static struct wiimote_data *wiimote_create (struct hid_device *hdev) {struct wiimote_data *wdata;
@@ -1300,7 +1211,6 @@ static void wiimote_destroy(struct wiimote_data *wdata) {wiidebug_deinit (wdata);wiiext_deinit (wdata); -wiimote_leds_destroy (wdata);cancel_work_sync (&wdata->init_worker);wiimote_modules_unload (wdata);
@@ -1357,10 +1267,6 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_ir; } - ret =wiimote_leds_create (wdata); -if (ret) - goto err_free; - ret =wiiext_init (wdata);if (ret) goto err_free;
@@ -1371,11 +1277,6 @@ static int wiimote_hid_probe(struct hid_device *hdev,hid_info (hdev,"New device registered\n" ); -/* by default set led1 after device initialization */ -spin_lock_irq (&wdata->state.lock); -wiiproto_req_leds (wdata,WIIPROTO_FLAG_LED1 ); -spin_unlock_irq (&wdata->state.lock); -/* schedule device detection */ schedule_work (&wdata->init_worker);
drivers/hid/hid-wiimote-modules.c +140 -0
150 lines not on this page · raw message
drivers/hid/hid-wiimote.h +5 -0
@@ -129,6 +129,10 @@ enum wiimod_module {WIIMOD_KEYS ,WIIMOD_RUMBLE ,WIIMOD_BATTERY , +WIIMOD_LED1 , +WIIMOD_LED2 , +WIIMOD_LED3 , +WIIMOD_LED4 ,WIIMOD_NUM , WIIMOD_NULL = WIIMOD_NUM, };
@@ -185,6 +189,7 @@ enum wiiproto_reqs {extern void wiiproto_req_drm (struct wiimote_data *wdata,__u8 drm);extern void wiiproto_req_rumble (struct wiimote_data *wdata,__u8 rumble); +extern void wiiproto_req_leds (struct wiimote_data *wdata,int leds);extern void wiiproto_req_status (struct wiimote_data *wdata);extern int wiimote_cmd_write (struct wiimote_data *wdata,__u32 offset,const __u8 *wmem,__u8 size);
Signature · 1 line
1.8.2.1
PATCH 11/21 HID: wiimote: convert ACCEL to module
In reply to David HerrmannAccelerometer data is very similar to KEYS handling. Therefore, convert all ACCEL related handling into a sub-device module similar to KEYS.
This doesn't change any semantics but only moves code over to wiimote-modules.
--- drivers/hid/hid-wiimote-core.c | 101 +++++-------------------------- drivers/hid/hid-wiimote-modules.c | 123 ++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 2 + 3 files changed, 140 insertions(+), 86 deletions(-)
drivers/hid/hid-wiimote-core.c +15 -86
@@ -236,7 +236,7 @@ void wiiproto_req_status(struct wiimote_data *wdata)wiimote_queue (wdata, cmd,sizeof (cmd)); } -static void wiiproto_req_accel (struct wiimote_data *wdata,__u8 accel) +void wiiproto_req_accel (struct wiimote_data *wdata,__u8 accel) { accel = !!accel;if (accel == !!(wdata->state.flags &WIIPROTO_FLAG_ACCEL ))
@@ -528,28 +528,6 @@ unlock:return ret; } -static int wiimote_accel_open (struct input_dev *dev) -{ -struct wiimote_data *wdata =input_get_drvdata (dev); -unsigned long flags; - -spin_lock_irqsave (&wdata->state.lock, flags); -wiiproto_req_accel (wdata, true); -spin_unlock_irqrestore (&wdata->state.lock, flags); - -return 0 ; -} - -static void wiimote_accel_close (struct input_dev *dev) -{ -struct wiimote_data *wdata =input_get_drvdata (dev); -unsigned long flags; - -spin_lock_irqsave (&wdata->state.lock, flags); -wiiproto_req_accel (wdata, false); -spin_unlock_irqrestore (&wdata->state.lock, flags); -} -static int wiimote_ir_open (struct input_dev *dev) {struct wiimote_data *wdata =input_get_drvdata (dev);
@@ -581,6 +559,7 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = {WIIMOD_LED2 ,WIIMOD_LED3 ,WIIMOD_LED4 , +WIIMOD_ACCEL , WIIMOD_NULL, }, [WIIMOTE_DEV_GEN10] = (const __u8[]){
@@ -591,6 +570,7 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = {WIIMOD_LED2 ,WIIMOD_LED3 ,WIIMOD_LED4 , +WIIMOD_ACCEL , WIIMOD_NULL, }, [WIIMOTE_DEV_GEN20] = (const __u8[]){
@@ -601,6 +581,7 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = { WIIMOD_LED2,WIIMOD_LED3 ,WIIMOD_LED4 , +WIIMOD_ACCEL , WIIMOD_NULL, }, };
@@ -818,35 +799,17 @@ static void handler_keys(struct wiimote_data *wdata, const __u8 *payload)static void handler_accel (struct wiimote_data *wdata,const __u8 *payload) { -__u16 x, y, z; - -if (!(wdata->state.flags &WIIPROTO_FLAG_ACCEL )) -return ; - -/* -* payload is: BB BB XX YY ZZ -* Accelerometer data is encoded into 3 10bit values. XX, YY and ZZ -* contain the upper 8 bits of each value. The lower 2 bits are -* contained in the buttons data BB BB. -* Bits 6 and 7 of the first buttons byte BB is the lower 2 bits of the -* X accel value. Bit 5 of the second buttons byte is the 2nd bit of Y -* accel value and bit 6 is the second bit of the Z value. -* The first bit of Y and Z values is not available and always set to 0. -* 0x200 is returned on no movement. -*/ - - x = payload[2 ] <<2 ; - y = payload[3 ] <<2 ; - z = payload[4 ] <<2 ; - - x |= (payload[0 ] >>5 ) &0x3 ; - y |= (payload[1 ] >>4 ) &0x2 ; - z |= (payload[1 ] >>5 ) &0x2 ; +const __u8 *iter, *mods; +const struct wiimod_ops *ops; -input_report_abs (wdata->accel,ABS_RX , x -0x200 ); -input_report_abs (wdata->accel,ABS_RY , y -0x200 ); -input_report_abs (wdata->accel,ABS_RZ , z -0x200 ); -input_sync (wdata->accel); + mods = wiimote_devtype_mods[wdata->state.devtype]; +for (iter = mods; *iter !=WIIMOD_NULL ; ++iter) { + ops = wiimod_table[*iter]; +if (ops->in_accel) { + ops->in_accel (wdata, payload); +break ; + } + } }#define ir_to_input0 (wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \
@@ -1133,31 +1096,9 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev) wdata->hdev = hdev;hid_set_drvdata (hdev, wdata); - wdata->accel =input_allocate_device (); -if (!wdata->accel) - goto err; - -input_set_drvdata (wdata->accel, wdata); - wdata->accel->open = wiimote_accel_open; - wdata->accel->close = wiimote_accel_close; - wdata->accel->dev.parent = &wdata->hdev->dev; - wdata->accel->id.bustype = wdata->hdev->bus; - wdata->accel->id.vendor = wdata->hdev->vendor; - wdata->accel->id.product = wdata->hdev->product; - wdata->accel->id.version = wdata->hdev->version; - wdata->accel->name =WIIMOTE_NAME " Accelerometer" ; - -set_bit (EV_ABS , wdata->accel->evbit); -set_bit (ABS_RX , wdata->accel->absbit); -set_bit (ABS_RY , wdata->accel->absbit); -set_bit (ABS_RZ , wdata->accel->absbit); -input_set_abs_params (wdata->accel,ABS_RX ,-500 ,500 ,2 ,4 ); -input_set_abs_params (wdata->accel,ABS_RY ,-500 ,500 ,2 ,4 ); -input_set_abs_params (wdata->accel,ABS_RZ ,-500 ,500 ,2 ,4 ); - wdata->ir =input_allocate_device ();if (!wdata->ir) - goto err_ir; + goto err;input_set_drvdata (wdata->ir, wdata); wdata->ir->open = wiimote_ir_open;
@@ -1200,8 +1141,6 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev)return wdata; -err_ir: -input_free_device (wdata->accel); err:kfree (wdata);return NULL ;
@@ -1214,7 +1153,6 @@ static void wiimote_destroy(struct wiimote_data *wdata)cancel_work_sync (&wdata->init_worker);wiimote_modules_unload (wdata); -input_unregister_device (wdata->accel);input_unregister_device (wdata->ir);cancel_work_sync (&wdata->queue.worker);hid_hw_close (wdata->hdev);
@@ -1255,12 +1193,6 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_stop; } - ret =input_register_device (wdata->accel); -if (ret) { -hid_err (hdev,"Cannot register input device\n" ); - goto err_close; - } - ret =input_register_device (wdata->ir);if (ret) {hid_err (hdev,"Cannot register input device\n" );
@@ -1287,9 +1219,6 @@ err_free:return ret; err_ir: -input_unregister_device (wdata->accel); - wdata->accel =NULL ; -err_close:hid_hw_close (hdev); err_stop:hid_hw_stop (hdev);
drivers/hid/hid-wiimote-modules.c +123 -0
133 lines not on this page · raw message
drivers/hid/hid-wiimote.h +2 -0
@@ -133,6 +133,7 @@ enum wiimod_module {WIIMOD_LED2 ,WIIMOD_LED3 ,WIIMOD_LED4 , +WIIMOD_ACCEL ,WIIMOD_NUM , WIIMOD_NULL = WIIMOD_NUM, };
@@ -191,6 +192,7 @@ extern void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm);extern void wiiproto_req_rumble (struct wiimote_data *wdata,__u8 rumble);extern void wiiproto_req_leds (struct wiimote_data *wdata,int leds);extern void wiiproto_req_status (struct wiimote_data *wdata); +extern void wiiproto_req_accel (struct wiimote_data *wdata,__u8 accel);extern int wiimote_cmd_write (struct wiimote_data *wdata,__u32 offset,const __u8 *wmem,__u8 size); extern ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset,
Signature · 1 line
1.8.2.1
PATCH 12/21 HID: wiimote: convert IR to module
In reply to David HerrmannIR is the last piece that still is handled natively. This patch converts it into a sub-device module like all other sub-devices. It mainly moves code and doesn't change semantics.
We also implicitly sync IR data on ir_to_input3 now so the explicit input_sync() calls are no longer needed.
--- drivers/hid/hid-wiimote-core.c | 233 +++------------------------------ drivers/hid/hid-wiimote-modules.c | 263 ++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 3 + 3 files changed, 287 insertions(+), 212 deletions(-)
drivers/hid/hid-wiimote-core.c +21 -212
@@ -250,7 +250,7 @@ void wiiproto_req_accel(struct wiimote_data *wdata, __u8 accel)wiiproto_req_drm (wdata,WIIPROTO_REQ_NULL ); } -static void wiiproto_req_ir1 (struct wiimote_data *wdata,__u8 flags) +void wiiproto_req_ir1 (struct wiimote_data *wdata,__u8 flags) {__u8 cmd[2 ];
@@ -261,7 +261,7 @@ static void wiiproto_req_ir1(struct wiimote_data *wdata, __u8 flags)wiimote_queue (wdata, cmd,sizeof (cmd)); } -static void wiiproto_req_ir2 (struct wiimote_data *wdata,__u8 flags) +void wiiproto_req_ir2 (struct wiimote_data *wdata,__u8 flags) {__u8 cmd[2 ];
@@ -416,132 +416,6 @@ static __u8 wiimote_cmd_read_ext(struct wiimote_data *wdata)return WIIMOTE_EXT_UNKNOWN ; } -static int wiimote_init_ir (struct wiimote_data *wdata,__u16 mode) -{ -int ret; -unsigned long flags; -__u8 format =0 ; -static const __u8 data_enable[] = {0x01 }; -static const __u8 data_sens1[] = {0x02 ,0x00 ,0x00 ,0x71 ,0x01 , -0x00 ,0xaa ,0x00 ,0x64 }; -static const __u8 data_sens2[] = {0x63 ,0x03 }; -static const __u8 data_fin[] = {0x08 }; - -spin_lock_irqsave (&wdata->state.lock, flags); - -if (mode == (wdata->state.flags &WIIPROTO_FLAGS_IR )) { -spin_unlock_irqrestore (&wdata->state.lock, flags); -return 0 ; - } - -if (mode ==0 ) { - wdata->state.flags &= ~WIIPROTO_FLAGS_IR ; -wiiproto_req_ir1 (wdata,0 ); -wiiproto_req_ir2 (wdata,0 ); -wiiproto_req_drm (wdata,WIIPROTO_REQ_NULL ); -spin_unlock_irqrestore (&wdata->state.lock, flags); -return 0 ; - } - -spin_unlock_irqrestore (&wdata->state.lock, flags); - - ret =wiimote_cmd_acquire (wdata); -if (ret) -return ret; - -/* send PIXEL CLOCK ENABLE cmd first */ -spin_lock_irqsave (&wdata->state.lock, flags); -wiimote_cmd_set (wdata,WIIPROTO_REQ_IR1 ,0 ); -wiiproto_req_ir1 (wdata,0x06 ); -spin_unlock_irqrestore (&wdata->state.lock, flags); - - ret =wiimote_cmd_wait (wdata); -if (ret) - goto unlock; -if (wdata->state.cmd_err) { - ret = -EIO ; - goto unlock; - } - -/* enable IR LOGIC */ -spin_lock_irqsave (&wdata->state.lock, flags); -wiimote_cmd_set (wdata,WIIPROTO_REQ_IR2 ,0 ); -wiiproto_req_ir2 (wdata,0x06 ); -spin_unlock_irqrestore (&wdata->state.lock, flags); - - ret =wiimote_cmd_wait (wdata); -if (ret) - goto unlock; -if (wdata->state.cmd_err) { - ret = -EIO ; - goto unlock; - } - -/* enable IR cam but do not make it send data, yet */ - ret =wiimote_cmd_write (wdata,0xb00030 , data_enable, -sizeof (data_enable)); -if (ret) - goto unlock; - -/* write first sensitivity block */ - ret =wiimote_cmd_write (wdata,0xb00000 , data_sens1, -sizeof (data_sens1)); -if (ret) - goto unlock; - -/* write second sensitivity block */ - ret =wiimote_cmd_write (wdata,0xb0001a , data_sens2, -sizeof (data_sens2)); -if (ret) - goto unlock; - -/* put IR cam into desired state */ -switch (mode) { -case WIIPROTO_FLAG_IR_FULL : - format =5 ; -break ; -case WIIPROTO_FLAG_IR_EXT : - format =3 ; -break ; -case WIIPROTO_FLAG_IR_BASIC : - format =1 ; -break ; - } - ret =wiimote_cmd_write (wdata,0xb00033 , &format,sizeof (format)); -if (ret) - goto unlock; - -/* make IR cam send data */ - ret =wiimote_cmd_write (wdata,0xb00030 , data_fin,sizeof (data_fin)); -if (ret) - goto unlock; - -/* request new DRM mode compatible to IR mode */ -spin_lock_irqsave (&wdata->state.lock, flags); - wdata->state.flags &= ~WIIPROTO_FLAGS_IR ; - wdata->state.flags |= mode &WIIPROTO_FLAGS_IR ; -wiiproto_req_drm (wdata,WIIPROTO_REQ_NULL ); -spin_unlock_irqrestore (&wdata->state.lock, flags); - -unlock: -wiimote_cmd_release (wdata); -return ret; -} - -static int wiimote_ir_open (struct input_dev *dev) -{ -struct wiimote_data *wdata =input_get_drvdata (dev); - -return wiimote_init_ir (wdata,WIIPROTO_FLAG_IR_BASIC ); -} - -static void wiimote_ir_close (struct input_dev *dev) -{ -struct wiimote_data *wdata =input_get_drvdata (dev); - -wiimote_init_ir (wdata,0 ); -} -/* device module handling */ static const __u8 *const wiimote_devtype_mods[WIIMOTE_DEV_NUM ] = {
@@ -560,6 +434,7 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = {WIIMOD_LED3 ,WIIMOD_LED4 ,WIIMOD_ACCEL , +WIIMOD_IR , WIIMOD_NULL, }, [WIIMOTE_DEV_GEN10] = (const __u8[]){
@@ -571,6 +446,7 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = {WIIMOD_LED3 ,WIIMOD_LED4 ,WIIMOD_ACCEL , +WIIMOD_IR , WIIMOD_NULL, }, [WIIMOTE_DEV_GEN20] = (const __u8[]){
@@ -582,6 +458,7 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = { WIIMOD_LED3,WIIMOD_LED4 ,WIIMOD_ACCEL , +WIIMOD_IR , WIIMOD_NULL, }, };
@@ -812,45 +689,27 @@ static void handler_accel(struct wiimote_data *wdata, const __u8 *payload) } } -#define ir_to_input0 (wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \ - ABS_HAT0X, ABS_HAT0Y) -#define ir_to_input1 (wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \ - ABS_HAT1X, ABS_HAT1Y) -#define ir_to_input2 (wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \ - ABS_HAT2X, ABS_HAT2Y) -#define ir_to_input3 (wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \ - ABS_HAT3X, ABS_HAT3Y) - -static void __ir_to_input (struct wiimote_data *wdata,const __u8 *ir, -bool packed,__u8 xid,__u8 yid) +static void handler_ir (struct wiimote_data *wdata,const __u8 *payload, +bool packed,unsigned int id) { -__u16 x, y; - -if (!(wdata->state.flags &WIIPROTO_FLAGS_IR )) -return ; - -/* -* Basic IR data is encoded into 3 bytes. The first two bytes are the -* lower 8 bit of the X/Y data, the 3rd byte contains the upper 2 bits -* of both. -* If data is packed, then the 3rd byte is put first and slightly -* reordered. This allows to interleave packed and non-packed data to -* have two IR sets in 5 bytes instead of 6. -* The resulting 10bit X/Y values are passed to the ABS_HATXY input dev. -*/ +const __u8 *iter, *mods; +const struct wiimod_ops *ops; -if (packed) { - x = ir[1 ] | ((ir[0 ] &0x03 ) <<8 ); - y = ir[2 ] | ((ir[0 ] &0x0c ) <<6 ); - }else { - x = ir[0 ] | ((ir[2 ] &0x30 ) <<4 ); - y = ir[1 ] | ((ir[2 ] &0xc0 ) <<2 ); + mods = wiimote_devtype_mods[wdata->state.devtype]; +for (iter = mods; *iter !=WIIMOD_NULL ; ++iter) { + ops = wiimod_table[*iter]; +if (ops->in_ir) { + ops->in_ir (wdata, payload, packed, id); +break ; + } } - -input_report_abs (wdata->ir, xid, x); -input_report_abs (wdata->ir, yid, y); } +#define ir_to_input0 (wdata, ir, packed) handler_ir((wdata), (ir), (packed), 0) +#define ir_to_input1 (wdata, ir, packed) handler_ir((wdata), (ir), (packed), 1) +#define ir_to_input2 (wdata, ir, packed) handler_ir((wdata), (ir), (packed), 2) +#define ir_to_input3 (wdata, ir, packed) handler_ir((wdata), (ir), (packed), 3) +/* reduced status report with "BB BB" key data only */ static void handler_status_K (struct wiimote_data *wdata,const __u8 *payload)
@@ -943,7 +802,6 @@ static void handler_drm_KAI(struct wiimote_data *wdata, const __u8 *payload)ir_to_input1 (wdata, &payload[8 ], false);ir_to_input2 (wdata, &payload[11 ], false);ir_to_input3 (wdata, &payload[14 ], false); -input_sync (wdata->ir); }static void handler_drm_KEE (struct wiimote_data *wdata,const __u8 *payload)
@@ -959,7 +817,6 @@ static void handler_drm_KIE(struct wiimote_data *wdata, const __u8 *payload)ir_to_input1 (wdata, &payload[4 ], true);ir_to_input2 (wdata, &payload[7 ], false);ir_to_input3 (wdata, &payload[9 ], true); -input_sync (wdata->ir);wiiext_handle (wdata, &payload[12 ]); }
@@ -978,7 +835,6 @@ static void handler_drm_KAIE(struct wiimote_data *wdata, const __u8 *payload)ir_to_input1 (wdata, &payload[7 ], true);ir_to_input2 (wdata, &payload[10 ], false);ir_to_input3 (wdata, &payload[12 ], true); -input_sync (wdata->ir);wiiext_handle (wdata, &payload[15 ]); }
@@ -997,7 +853,6 @@ static void handler_drm_SKAI1(struct wiimote_data *wdata, const __u8 *payload)ir_to_input0 (wdata, &payload[3 ], false);ir_to_input1 (wdata, &payload[12 ], false); -input_sync (wdata->ir); }static void handler_drm_SKAI2 (struct wiimote_data *wdata,const __u8 *payload)
@@ -1018,7 +873,6 @@ static void handler_drm_SKAI2(struct wiimote_data *wdata, const __u8 *payload)ir_to_input2 (wdata, &payload[3 ], false);ir_to_input3 (wdata, &payload[12 ], false); -input_sync (wdata->ir); }struct wiiproto_handler {
@@ -1096,38 +950,6 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev) wdata->hdev = hdev;hid_set_drvdata (hdev, wdata); - wdata->ir =input_allocate_device (); -if (!wdata->ir) - goto err; - -input_set_drvdata (wdata->ir, wdata); - wdata->ir->open = wiimote_ir_open; - wdata->ir->close = wiimote_ir_close; - wdata->ir->dev.parent = &wdata->hdev->dev; - wdata->ir->id.bustype = wdata->hdev->bus; - wdata->ir->id.vendor = wdata->hdev->vendor; - wdata->ir->id.product = wdata->hdev->product; - wdata->ir->id.version = wdata->hdev->version; - wdata->ir->name =WIIMOTE_NAME " IR" ; - -set_bit (EV_ABS , wdata->ir->evbit); -set_bit (ABS_HAT0X , wdata->ir->absbit); -set_bit (ABS_HAT0Y , wdata->ir->absbit); -set_bit (ABS_HAT1X , wdata->ir->absbit); -set_bit (ABS_HAT1Y , wdata->ir->absbit); -set_bit (ABS_HAT2X , wdata->ir->absbit); -set_bit (ABS_HAT2Y , wdata->ir->absbit); -set_bit (ABS_HAT3X , wdata->ir->absbit); -set_bit (ABS_HAT3Y , wdata->ir->absbit); -input_set_abs_params (wdata->ir,ABS_HAT0X ,0 ,1023 ,2 ,4 ); -input_set_abs_params (wdata->ir,ABS_HAT0Y ,0 ,767 ,2 ,4 ); -input_set_abs_params (wdata->ir,ABS_HAT1X ,0 ,1023 ,2 ,4 ); -input_set_abs_params (wdata->ir,ABS_HAT1Y ,0 ,767 ,2 ,4 ); -input_set_abs_params (wdata->ir,ABS_HAT2X ,0 ,1023 ,2 ,4 ); -input_set_abs_params (wdata->ir,ABS_HAT2Y ,0 ,767 ,2 ,4 ); -input_set_abs_params (wdata->ir,ABS_HAT3X ,0 ,1023 ,2 ,4 ); -input_set_abs_params (wdata->ir,ABS_HAT3Y ,0 ,767 ,2 ,4 ); -spin_lock_init (&wdata->queue.lock);INIT_WORK (&wdata->queue.worker, wiimote_queue_worker);
@@ -1140,10 +962,6 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev)INIT_WORK (&wdata->init_worker, wiimote_init_worker);return wdata; - -err: -kfree (wdata); -return NULL ; }static void wiimote_destroy (struct wiimote_data *wdata)
@@ -1153,7 +971,6 @@ static void wiimote_destroy(struct wiimote_data *wdata)cancel_work_sync (&wdata->init_worker);wiimote_modules_unload (wdata); -input_unregister_device (wdata->ir);cancel_work_sync (&wdata->queue.worker);hid_hw_close (wdata->hdev);hid_hw_stop (wdata->hdev);
@@ -1193,12 +1010,6 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_stop; } - ret =input_register_device (wdata->ir); -if (ret) { -hid_err (hdev,"Cannot register input device\n" ); - goto err_ir; - } - ret =wiiext_init (wdata);if (ret) goto err_free;
@@ -1218,8 +1029,6 @@ err_free:wiimote_destroy (wdata);return ret; -err_ir: -hid_hw_close (hdev); err_stop:hid_hw_stop (hdev); err:
drivers/hid/hid-wiimote-modules.c +263 -0
273 lines not on this page · raw message
drivers/hid/hid-wiimote.h +3 -0
@@ -134,6 +134,7 @@ enum wiimod_module {WIIMOD_LED3 ,WIIMOD_LED4 ,WIIMOD_ACCEL , +WIIMOD_IR ,WIIMOD_NUM , WIIMOD_NULL = WIIMOD_NUM, };
@@ -193,6 +194,8 @@ extern void wiiproto_req_rumble(struct wiimote_data *wdata, __u8 rumble);extern void wiiproto_req_leds (struct wiimote_data *wdata,int leds);extern void wiiproto_req_status (struct wiimote_data *wdata);extern void wiiproto_req_accel (struct wiimote_data *wdata,__u8 accel); +extern void wiiproto_req_ir1 (struct wiimote_data *wdata,__u8 flags); +extern void wiiproto_req_ir2 (struct wiimote_data *wdata,__u8 flags);extern int wiimote_cmd_write (struct wiimote_data *wdata,__u32 offset,const __u8 *wmem,__u8 size); extern ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset,
Signature · 1 line
1.8.2.1
PATCH 13/21 HID: wiimote: add extension hotplug support
In reply to David HerrmannThe Wii Remote has several extension ports. The first port (EXT) provides hotplug events whenever an extension is plugged. The second port (MP) does not provide hotplug events by default. Instead, we have to map MP into EXT to get events for it.
This patch introduces hotplug support for extensions. It is fairly complicated to get this right because the Wii Remote sends a lot of noise-hotplug events while activating extension ports. We need to filter the events and only handle the events that are real hotplug events.
Mapping MP into EXT is easy. But if we want both, MP _and_ EXT at the same time, we need to map MP into EXT and enable a passthrough-mode. This will then send real EXT events through the mapped MP interleaved with real MP events. But once MP is mapped, we no longer have access to the real EXT registers so we need to perform setup _before_ mapping MP. Furthermore, we no longer can read EXT IDs so we cannot verify if EXT is still the same extension that we expect it to be.
We deal with this by unmapping MP whenever we got into a situation where EXT might have changed. We then re-read EXT and MP and remap everything.
The real Wii Console takes a fairly easy approach: It simply reconnects to the device on hotplug events that it didn't expect. So if a program wants MP events, but MP is disconnected, it fails and reconnects so it can wait for MP hotplug events again.
This simplifies hotplugging a lot because we just react on PLUG events and ignore UNPLUG events.
The more sophisticated Wii applications avoid reconnection (well, they still reconnect during many weird events, but at least not during UNPLUG) but they start polling the device. This allows them to disable the device, poll for the extension ports to settle and then initialize them again. Unfortunately, this approach fails whenever an extension is replugged while it is initialized. We would loose UNPLUG events and polling the device later will give unreliable results because the extension port might be in some weird state, even though it's actually unplugged.
Our approach is a real HOTPLUG approch. We keep track of the EXT and mapped MP hotplug events whenever they occur. We then re-evaluate the device state and initialize any possible new extension or deinitialize any gone extension. Only during initialization, we set an extension port ACTIVE. However, during an unplug event we mark them as INACTIVE. This guarantess that a fast UNPLUG -> PLUG event sequence doesn't keep them marked as PLUGGED+ACTIVE but only PLUGGED.
To deal with annoying noise-hotplug events during extension mapping, we simply rescan the device before performing any mapping. This allows us to ignore all the noise events as long as the device is in the correct state.
Long story short: EXT and MP registers are sparsely known and we need to jump through hoops to get reliable HOTPLUG working. But while Nintendo needs *FOUR* Bluetooth reconnections for the shortest imaginable boot->menu->game->menu->shutdown sequence, we now need *ZERO*.
As always, 3rd party devices tend to break whenever we behave differently than the original Wii. So there are also devices which _expect_ a disconnect after UNPLUG. Obviously, these devices won't benefit from this patch. But all official devices were tested extensively and work great during any hotplug sequence. Yay!
--- drivers/hid/hid-wiimote-core.c | 635 ++++++++++++++++++++++++++++++++++++-- drivers/hid/hid-wiimote-modules.c | 16 + drivers/hid/hid-wiimote.h | 25 ++ 3 files changed, 655 insertions(+), 21 deletions(-)
drivers/hid/hid-wiimote-core.c +614 -21
@@ -179,11 +179,24 @@ void wiiproto_req_leds(struct wiimote_data *wdata, int leds)* Check what peripherals of the wiimote are currently * active and select a proper DRM that supports all of * the requested data inputs. +* +* Not all combinations are actually supported. The following +* combinations work only with limitations: +* - IR cam in extended or full mode disables any data transmission +* of extension controllers. There is no DRM mode that supports +* extension bytes plus extended/full IR. +* - IR cam with accelerometer and extension *_EXT8 is not supported. +* However, all extensions that need *_EXT8 are devices that don't +* support IR cameras. Hence, this shouldn't happen under normal +* operation. */ static __u8 select_drm (struct wiimote_data *wdata) {__u8 ir = wdata->state.flags &WIIPROTO_FLAGS_IR ; -bool ext =wiiext_active (wdata); +bool ext; + + ext = (wdata->state.flags &WIIPROTO_FLAG_EXT_USED ) || + (wdata->state.flags &WIIPROTO_FLAG_MP_USED );if (ir ==WIIPROTO_FLAG_IR_BASIC ) {if (wdata->state.flags &WIIPROTO_FLAG_ACCEL )
@@ -399,9 +412,8 @@ static int wiimote_cmd_init_ext(struct wiimote_data *wdata) }/* requires the cmd-mutex to be held */ -static __u8 wiimote_cmd_read_ext (struct wiimote_data *wdata) +static __u8 wiimote_cmd_read_ext (struct wiimote_data *wdata,__u8 *rmem) { -__u8 rmem[6 ];int ret;/* read extension ID */
@@ -416,6 +428,89 @@ static __u8 wiimote_cmd_read_ext(struct wiimote_data *wdata)return WIIMOTE_EXT_UNKNOWN ; } +/* requires the cmd-mutex to be held */ +static int wiimote_cmd_init_mp (struct wiimote_data *wdata) +{ +__u8 wmem; +int ret; + +/* initialize MP */ + wmem =0x55 ; + ret =wiimote_cmd_write (wdata,0xa600f0 , &wmem,sizeof (wmem)); +if (ret) +return ret; + +/* disable default encryption */ + wmem =0x0 ; + ret =wiimote_cmd_write (wdata,0xa600fb , &wmem,sizeof (wmem)); +if (ret) +return ret; + +return 0 ; +} + +/* requires the cmd-mutex to be held */ +static bool wiimote_cmd_map_mp (struct wiimote_data *wdata,__u8 exttype) +{ +__u8 wmem; + +/* map MP with correct pass-through mode */ +switch (exttype) { +default : + wmem =0x04 ; +break ; + } + +return wiimote_cmd_write (wdata,0xa600fe , &wmem,sizeof (wmem)); +} + +/* requires the cmd-mutex to be held */ +static bool wiimote_cmd_read_mp (struct wiimote_data *wdata,__u8 *rmem) +{ +int ret; + +/* read motion plus ID */ + ret =wiimote_cmd_read (wdata,0xa600fa , rmem,6 ); +if (ret !=6 ) +return false; + +if (rmem[5 ] ==0x05 ) +return true; + +hid_info (wdata->hdev,"unknown motion plus ID: %02x:%02x %02x:%02x %02x:%02x\n" , + rmem[0 ], rmem[1 ], rmem[2 ], rmem[3 ], rmem[4 ], rmem[5 ]); + +return false; +} + +/* requires the cmd-mutex to be held */ +static __u8 wiimote_cmd_read_mp_mapped (struct wiimote_data *wdata) +{ +int ret; +__u8 rmem[6 ]; + +/* read motion plus ID */ + ret =wiimote_cmd_read (wdata,0xa400fa , rmem,6 ); +if (ret !=6 ) +return WIIMOTE_MP_NONE ; + +if (rmem[0 ] ==0xff && rmem[1 ] ==0xff && rmem[2 ] ==0xff && + rmem[3 ] ==0xff && rmem[4 ] ==0xff && rmem[5 ] ==0xff ) +return WIIMOTE_MP_NONE ; + +if (rmem[4 ] ==0x04 && rmem[5 ] ==0x05 ) +return WIIMOTE_MP_SINGLE ; +else if (rmem[4 ] ==0x05 && rmem[5 ] ==0x05 ) +return WIIMOTE_MP_PASSTHROUGH_NUNCHUK ; +else if (rmem[4 ] ==0x07 && rmem[5 ] ==0x05 ) +return WIIMOTE_MP_PASSTHROUGH_CLASSIC ; + +hid_info (wdata->hdev,"unknown motion plus ID: %02x:%02x %02x:%02x %02x:%02x\n" , + rmem[0 ], rmem[1 ], rmem[2 ], rmem[3 ], rmem[4 ], rmem[5 ]); + +return WIIMOTE_MP_UNKNOWN ; +} +/* device module handling */ static const __u8 *const wiimote_devtype_mods[WIIMOTE_DEV_NUM ] = {
@@ -561,6 +656,81 @@ static void wiimote_modules_unload(struct wiimote_data *wdata) } } +/* device extension handling */ + +static void wiimote_ext_load (struct wiimote_data *wdata,unsigned int ext) +{ +unsigned long flags; +const struct wiimod_ops *ops; +int ret; + + ops = wiimod_ext_table[ext]; + +if (ops->probe) { + ret = ops->probe (ops, wdata); +if (ret) + ext =WIIMOTE_EXT_UNKNOWN ; + } + +spin_lock_irqsave (&wdata->state.lock, flags); + wdata->state.exttype = ext; +spin_unlock_irqrestore (&wdata->state.lock, flags); +} + +static void wiimote_ext_unload (struct wiimote_data *wdata) +{ +unsigned long flags; +const struct wiimod_ops *ops; + + ops = wiimod_ext_table[wdata->state.exttype]; + +spin_lock_irqsave (&wdata->state.lock, flags); + wdata->state.exttype =WIIMOTE_EXT_UNKNOWN ; + wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED ; +spin_unlock_irqrestore (&wdata->state.lock, flags); + +if (ops->remove) + ops->remove (ops, wdata); +} + +static void wiimote_mp_load (struct wiimote_data *wdata) +{ +unsigned long flags; +const struct wiimod_ops *ops; +int ret; +__u8 mode =2 ; + + ops = &wiimod_mp; +if (ops->probe) { + ret = ops->probe (ops, wdata); +if (ret) + mode =1 ; + } + +spin_lock_irqsave (&wdata->state.lock, flags); + wdata->state.mp = mode; +spin_unlock_irqrestore (&wdata->state.lock, flags); +} + +static void wiimote_mp_unload (struct wiimote_data *wdata) +{ +unsigned long flags; +const struct wiimod_ops *ops; + +if (wdata->state.mp <2 ) +return ; + + ops = &wiimod_mp; + +spin_lock_irqsave (&wdata->state.lock, flags); + wdata->state.mp =0 ; + wdata->state.flags &= ~WIIPROTO_FLAG_MP_USED ; +spin_unlock_irqrestore (&wdata->state.lock, flags); + +if (ops->remove) + ops->remove (ops, wdata); +} +/* device (re-)initialization and detection */ static const char *wiimote_devtype_names[WIIMOTE_DEV_NUM ] = {
@@ -617,7 +787,7 @@ done:static void wiimote_init_detect (struct wiimote_data *wdata) { -__u8 exttype =WIIMOTE_EXT_NONE ; +__u8 exttype =WIIMOTE_EXT_NONE , extdata[6 ];bool ext;int ret;
@@ -641,11 +811,291 @@ static void wiimote_init_detect(struct wiimote_data *wdata) goto out_release;wiimote_cmd_init_ext (wdata); - exttype =wiimote_cmd_read_ext (wdata); + exttype =wiimote_cmd_read_ext (wdata, extdata); out_release:wiimote_cmd_release (wdata);wiimote_init_set_type (wdata, exttype); +/* schedule MP timer */ +mod_timer (&wdata->timer, jiffies +HZ *4 ); +} + +/* +* MP hotplug events are not generated by the wiimote. Therefore, we need +* polling to detect it. We use a 4s interval for polling MP registers. This +* seems reasonable considering applications can trigger it manually via +* sysfs requests. +*/ +static void wiimote_init_poll_mp (struct wiimote_data *wdata) +{ +bool mp; +__u8 mpdata[6 ]; + +wiimote_cmd_acquire_noint (wdata); +wiimote_cmd_init_mp (wdata); + mp =wiimote_cmd_read_mp (wdata, mpdata); +wiimote_cmd_release (wdata); + +/* load/unload MP module if it changed */ +if (mp) { +if (!wdata->state.mp) { +hid_info (wdata->hdev,"detected extension: Nintendo Wii Motion Plus\n" ); +wiimote_mp_load (wdata); + } + }else { +if (wdata->state.mp) +wiimote_mp_unload (wdata); + } + +mod_timer (&wdata->timer, jiffies +HZ *4 ); +} + +/* +* Check whether the wiimote is in the expected state. The extension registers +* may change during hotplug and initialization so we might get hotplug events +* that we caused by remapping some memory. +* We use some heuristics here to check known states. If the wiimote is in the +* expected state, we can ignore the hotplug event. +* +* Returns "true" if the device is in expected state, "false" if we should +* redo hotplug handling and extension initialization. +*/ +static bool wiimote_init_check (struct wiimote_data *wdata) +{ +__u32 flags; +__u8 type, data[6 ]; +bool ret, poll_mp; + +spin_lock_irq (&wdata->state.lock); + flags = wdata->state.flags; +spin_unlock_irq (&wdata->state.lock); + +wiimote_cmd_acquire_noint (wdata); + +/* If MP is used and active, but the extension is not, we expect: +* read_mp_mapped() == WIIMOTE_MP_SINGLE +* state.flags == !EXT_ACTIVE && !MP_PLUGGED && MP_ACTIVE +* We do not check EXT_PLUGGED because it might change during +* initialization of MP without extensions. +* - If MP is unplugged/replugged, read_mp_mapped() fails +* - If EXT is plugged, MP_PLUGGED will get set */ +if (wdata->state.exttype ==WIIMOTE_EXT_NONE && + wdata->state.mp >0 && (flags &WIIPROTO_FLAG_MP_USED )) { + type =wiimote_cmd_read_mp_mapped (wdata); + ret = type ==WIIMOTE_MP_SINGLE ; + +spin_lock_irq (&wdata->state.lock); + ret = ret && !(wdata->state.flags &WIIPROTO_FLAG_EXT_ACTIVE ); + ret = ret && !(wdata->state.flags &WIIPROTO_FLAG_MP_PLUGGED ); + ret = ret && (wdata->state.flags &WIIPROTO_FLAG_MP_ACTIVE ); +spin_unlock_irq (&wdata->state.lock); + +/* while MP is mapped, we get EXT_PLUGGED events */ + poll_mp = false; + + goto out_release; + } + +/* If MP is unused, but the extension port is used, we expect: +* read_ext == state.exttype +* state.flags == !MP_ACTIVE && EXT_ACTIVE +* - If MP is plugged/unplugged, our timer detects it +* - If EXT is unplugged/replugged, EXT_ACTIVE will become unset */ +if (!(flags &WIIPROTO_FLAG_MP_USED ) && + wdata->state.exttype !=WIIMOTE_EXT_NONE ) { + type =wiimote_cmd_read_ext (wdata, data); + ret = type == wdata->state.exttype; + +spin_lock_irq (&wdata->state.lock); + ret = ret && !(wdata->state.flags &WIIPROTO_FLAG_MP_ACTIVE ); + ret = ret && (wdata->state.flags &WIIPROTO_FLAG_EXT_ACTIVE ); +spin_unlock_irq (&wdata->state.lock); + +/* poll MP for hotplug events */ + poll_mp = true; + + goto out_release; + } + +/* If neither MP nor an extension are used, we expect: +* read_ext() == WIIMOTE_EXT_NONE +* state.flags == !MP_ACTIVE && !EXT_ACTIVE && !EXT_PLUGGED +* No need to perform any action in this case as everything is +* disabled already. +* - If MP is plugged/unplugged, our timer detects it +* - If EXT is plugged, EXT_PLUGGED will be set */ +if (!(flags &WIIPROTO_FLAG_MP_USED ) && + wdata->state.exttype ==WIIMOTE_EXT_NONE ) { + type =wiimote_cmd_read_ext (wdata, data); + ret = type == wdata->state.exttype; + +spin_lock_irq (&wdata->state.lock); + ret = ret && !(wdata->state.flags &WIIPROTO_FLAG_EXT_ACTIVE ); + ret = ret && !(wdata->state.flags &WIIPROTO_FLAG_MP_ACTIVE ); + ret = ret && !(wdata->state.flags &WIIPROTO_FLAG_EXT_PLUGGED ); +spin_unlock_irq (&wdata->state.lock); + +/* poll MP for hotplug events */ + poll_mp = true; + + goto out_release; + } + +/* The trickiest part is if both EXT and MP are active. We cannot read +* the EXT ID, anymore, because MP is mapped over it. However, we use +* a handy trick here: +* - EXT_ACTIVE is unset whenever !MP_PLUGGED is sent +* MP_PLUGGED might be re-sent again before we are scheduled, but +* EXT_ACTIVE will stay unset. +* So it is enough to check for mp_mapped() and MP_ACTIVE and +* EXT_ACTIVE. EXT_PLUGGED is a sanity check. */ +if (wdata->state.exttype !=WIIMOTE_EXT_NONE && + wdata->state.mp >0 && (flags &WIIPROTO_FLAG_MP_USED )) { + type =wiimote_cmd_read_mp_mapped (wdata); + ret = type !=WIIMOTE_MP_NONE ; + ret = ret && type !=WIIMOTE_MP_UNKNOWN ; + ret = ret && type !=WIIMOTE_MP_SINGLE ; + +spin_lock_irq (&wdata->state.lock); + ret = ret && (wdata->state.flags &WIIPROTO_FLAG_EXT_PLUGGED ); + ret = ret && (wdata->state.flags &WIIPROTO_FLAG_EXT_ACTIVE ); + ret = ret && (wdata->state.flags &WIIPROTO_FLAG_MP_ACTIVE ); +spin_unlock_irq (&wdata->state.lock); + +/* while MP is mapped, we get EXT_PLUGGED events */ + poll_mp = false; + + goto out_release; + } + +/* unknown state */ + ret = false; + +out_release: +wiimote_cmd_release (wdata); + +/* only poll for MP if requested and if state didn't change */ +if (ret && poll_mp) +wiimote_init_poll_mp (wdata); + +return ret; +} + +static const char *wiimote_exttype_names[WIIMOTE_EXT_NUM ] = { + [WIIMOTE_EXT_NONE ] ="None" , + [WIIMOTE_EXT_UNKNOWN ] ="Unknown" , +}; + +/* +* Handle hotplug events +* If we receive an hotplug event and the device-check failed, we deinitialize +* the extension ports, re-read all extension IDs and set the device into +* the desired state. This involves mapping MP into the main extension +* registers, setting up extension passthrough modes and initializing the +* requested extensions. +*/ +static void wiimote_init_hotplug (struct wiimote_data *wdata) +{ +__u8 exttype, extdata[6 ], mpdata[6 ]; +__u16 flags; +bool mp; + +wiimote_cmd_acquire_noint (wdata); + +spin_lock_irq (&wdata->state.lock); + +/* get state snapshot that we will then work on */ + flags = wdata->state.flags; + +/* disable event forwarding temporarily */ + wdata->state.flags &= ~WIIPROTO_FLAG_EXT_ACTIVE ; + wdata->state.flags &= ~WIIPROTO_FLAG_MP_ACTIVE ; + +spin_unlock_irq (&wdata->state.lock); + +/* init extension and MP (deactivates current extension or MP) */ +wiimote_cmd_init_ext (wdata); +wiimote_cmd_init_mp (wdata); + +/* read extension and MP IDs */ + mp =wiimote_cmd_read_mp (wdata, mpdata); + exttype =wiimote_cmd_read_ext (wdata, extdata); + +wiimote_cmd_release (wdata); + +/* load/unload extension module if it changed */ +if (exttype != wdata->state.exttype) { +/* unload previous extension */ +wiimote_ext_unload (wdata); + +if (exttype ==WIIMOTE_EXT_UNKNOWN ) { +hid_info (wdata->hdev,"cannot detect extension; %02x:%02x %02x:%02x %02x:%02x\n" , + extdata[0 ], extdata[1 ], extdata[2 ], + extdata[3 ], extdata[4 ], extdata[5 ]); + }else if (exttype ==WIIMOTE_EXT_NONE ) { +spin_lock_irq (&wdata->state.lock); + wdata->state.exttype =WIIMOTE_EXT_NONE ; +spin_unlock_irq (&wdata->state.lock); + }else { +hid_info (wdata->hdev,"detected extension: %s\n" , + wiimote_exttype_names[exttype]); +/* try loading new extension */ +wiimote_ext_load (wdata, exttype); + } + } + +/* load/unload MP module if it changed */ +if (mp) { +if (!wdata->state.mp) { +hid_info (wdata->hdev,"detected extension: Nintendo Wii Motion Plus\n" ); +wiimote_mp_load (wdata); + } + }else { +if (wdata->state.mp) +wiimote_mp_unload (wdata); + } + +/* if MP is not used, do not map or activate it */ +if (!(flags &WIIPROTO_FLAG_MP_USED )) + mp = false; + +/* Map MP into main extension registers if used. This causes the +* device to send an hotplug event which we _must_ wait for. Otherwise, +* we get invalid data from the device. But the device doesn't send +* the hotplug event if it is already plugged. In this case, we also +* get an MP hotplug event later so it will be rescheduled, anyway. */ +if (mp) { +wiimote_cmd_acquire_noint (wdata); +wiimote_cmd_map_mp (wdata, exttype); +wiimote_cmd_release (wdata); + +/* delete MP hotplug timer */ +del_timer_sync (&wdata->timer); + }else { +/* reschedule MP hotplug timer */ +mod_timer (&wdata->timer, jiffies +HZ *4 ); + } + +spin_lock_irq (&wdata->state.lock); + +/* enable data forwarding again and set expected hotplug state */ +if (mp) { + wdata->state.flags |=WIIPROTO_FLAG_MP_ACTIVE ; +if (wdata->state.exttype ==WIIMOTE_EXT_NONE ) { + wdata->state.flags &= ~WIIPROTO_FLAG_EXT_PLUGGED ; + }else { + wdata->state.flags |=WIIPROTO_FLAG_EXT_PLUGGED ; + wdata->state.flags |=WIIPROTO_FLAG_MP_PLUGGED ; + wdata->state.flags |=WIIPROTO_FLAG_EXT_ACTIVE ; + } + }else if (wdata->state.exttype !=WIIMOTE_EXT_NONE ) { + wdata->state.flags |=WIIPROTO_FLAG_EXT_ACTIVE ; + } + +/* explicit protocol barrier for hotplug events */ +wiiproto_req_status (wdata); + +spin_unlock_irq (&wdata->state.lock); }static void wiimote_init_worker (struct work_struct *work)
@@ -655,6 +1105,30 @@ static void wiimote_init_worker(struct work_struct *work)if (wdata->state.devtype ==WIIMOTE_DEV_PENDING )wiimote_init_detect (wdata); +if (!wiimote_init_check (wdata)) +wiimote_init_hotplug (wdata); +} + +void __wiimote_schedule (struct wiimote_data *wdata) +{ +if (!(wdata->state.flags &WIIPROTO_FLAG_EXITING )) +schedule_work (&wdata->init_worker); +} + +static void wiimote_schedule (struct wiimote_data *wdata) +{ +unsigned long flags; + +spin_lock_irqsave (&wdata->state.lock, flags); +__wiimote_schedule (wdata); +spin_unlock_irqrestore (&wdata->state.lock, flags); +} + +static void wiimote_init_timeout (unsigned long arg) +{ +struct wiimote_data *wdata = (void *)arg; + +wiimote_schedule (wdata); }/* protocol handlers */
@@ -664,6 +1138,12 @@ static void handler_keys(struct wiimote_data *wdata, const __u8 *payload)const __u8 *iter, *mods;const struct wiimod_ops *ops; + ops = wiimod_ext_table[wdata->state.exttype]; +if (ops->in_keys) { + ops->in_keys (wdata, payload); +return ; + } + mods = wiimote_devtype_mods[wdata->state.devtype];for (iter = mods; *iter !=WIIMOD_NULL ; ++iter) { ops = wiimod_table[*iter];
@@ -679,6 +1159,12 @@ static void handler_accel(struct wiimote_data *wdata, const __u8 *payload)const __u8 *iter, *mods;const struct wiimod_ops *ops; + ops = wiimod_ext_table[wdata->state.exttype]; +if (ops->in_accel) { + ops->in_accel (wdata, payload); +return ; + } + mods = wiimote_devtype_mods[wdata->state.devtype];for (iter = mods; *iter !=WIIMOD_NULL ; ++iter) { ops = wiimod_table[*iter];
@@ -695,6 +1181,12 @@ static void handler_ir(struct wiimote_data *wdata, const __u8 *payload,const __u8 *iter, *mods;const struct wiimod_ops *ops; + ops = wiimod_ext_table[wdata->state.exttype]; +if (ops->in_ir) { + ops->in_ir (wdata, payload, packed, id); +return ; + } + mods = wiimote_devtype_mods[wdata->state.devtype];for (iter = mods; *iter !=WIIMOD_NULL ; ++iter) { ops = wiimod_table[*iter];
@@ -705,6 +1197,93 @@ static void handler_ir(struct wiimote_data *wdata, const __u8 *payload, } } +static void handler_ext (struct wiimote_data *wdata,const __u8 *payload, +size_t len) +{ +const __u8 *iter, *mods; +const struct wiimod_ops *ops; +bool is_mp; + +if (len <6 ) +return ; + +/* if MP is active, track MP slot hotplugging */ +if (wdata->state.flags &WIIPROTO_FLAG_MP_ACTIVE ) { +/* this bit is set for invalid events (eg. during hotplug) */ +if (payload[5 ] &0x01 ) +return ; + +if (payload[4 ] &0x01 ) { +if (!(wdata->state.flags &WIIPROTO_FLAG_MP_PLUGGED )) { + wdata->state.flags |=WIIPROTO_FLAG_MP_PLUGGED ; +__wiimote_schedule (wdata); + } + }else { +if (wdata->state.flags &WIIPROTO_FLAG_MP_PLUGGED ) { + wdata->state.flags &= ~WIIPROTO_FLAG_MP_PLUGGED ; + wdata->state.flags &= ~WIIPROTO_FLAG_EXT_ACTIVE ; +__wiimote_schedule (wdata); + } + } + +/* detect MP data that is sent interleaved with EXT data */ + is_mp = payload[5 ] &0x02 ; + +/* ignore EXT events if no extension is active */ +if (!(wdata->state.flags &WIIPROTO_FLAG_EXT_ACTIVE ) && !is_mp) +return ; + }else { + is_mp = false; + +/* ignore EXT events if no extension is active */ +if (!(wdata->state.flags &WIIPROTO_FLAG_EXT_ACTIVE )) +return ; + } + +/* try forwarding to extension handler, first */ + ops = wiimod_ext_table[wdata->state.exttype]; +if (!is_mp && ops->in_ext) { +if (!(ops->flags &WIIMOD_FLAG_EXT8 ) || len >=8 ) { + ops->in_ext (wdata, payload); +return ; + } + }else if (is_mp && ops->in_mp) { + ops->in_mp (wdata, payload); +return ; + } + +/* try forwarding to MP handler */ + ops = &wiimod_mp; +if (!is_mp && ops->in_ext) { +if (!(ops->flags &WIIMOD_FLAG_EXT8 ) || len >=8 ) { + ops->in_ext (wdata, payload); +return ; + } + }else if (is_mp && ops->in_mp) { + ops->in_mp (wdata, payload); +return ; + } + +/* try forwarding to loaded modules */ + mods = wiimote_devtype_mods[wdata->state.devtype]; +for (iter = mods; *iter !=WIIMOD_NULL ; ++iter) { + ops = wiimod_table[*iter]; +if (is_mp && !ops->in_mp) +continue ; +if (!is_mp && !ops->in_ext) +continue ; +if (!is_mp && (ops->flags &WIIMOD_FLAG_EXT8 ) && len <8 ) +continue ; + +if (is_mp) + ops->in_mp (wdata, payload); +else + ops->in_ext (wdata, payload); + +break ; + } +} +#define ir_to_input0 (wdata, ir, packed) handler_ir((wdata), (ir), (packed), 0)#define ir_to_input1 (wdata, ir, packed) handler_ir((wdata), (ir), (packed), 1)#define ir_to_input2 (wdata, ir, packed) handler_ir((wdata), (ir), (packed), 2)
@@ -727,11 +1306,18 @@ static void handler_status(struct wiimote_data *wdata, const __u8 *payload)/* update extension status */ if (payload[2 ] &0x02 ) { - wdata->state.flags |=WIIPROTO_FLAG_EXT_PLUGGED ; -wiiext_event (wdata, true); +if (!(wdata->state.flags &WIIPROTO_FLAG_EXT_PLUGGED )) { + wdata->state.flags |=WIIPROTO_FLAG_EXT_PLUGGED ; +__wiimote_schedule (wdata); + } }else { - wdata->state.flags &= ~WIIPROTO_FLAG_EXT_PLUGGED ; -wiiext_event (wdata, false); +if (wdata->state.flags &WIIPROTO_FLAG_EXT_PLUGGED ) { + wdata->state.flags &= ~WIIPROTO_FLAG_EXT_PLUGGED ; + wdata->state.flags &= ~WIIPROTO_FLAG_MP_PLUGGED ; + wdata->state.flags &= ~WIIPROTO_FLAG_EXT_ACTIVE ; + wdata->state.flags &= ~WIIPROTO_FLAG_MP_ACTIVE ; +__wiimote_schedule (wdata); + } } wdata->state.cmd_battery = payload[5 ];
@@ -791,7 +1377,7 @@ static void handler_drm_KA(struct wiimote_data *wdata, const __u8 *payload)static void handler_drm_KE (struct wiimote_data *wdata,const __u8 *payload) {handler_keys (wdata, payload); -wiiext_handle (wdata, &payload[2 ]); +handler_ext (wdata, &payload[2 ],8 ); }static void handler_drm_KAI (struct wiimote_data *wdata,const __u8 *payload)
@@ -807,7 +1393,7 @@ static void handler_drm_KAI(struct wiimote_data *wdata, const __u8 *payload)static void handler_drm_KEE (struct wiimote_data *wdata,const __u8 *payload) {handler_keys (wdata, payload); -wiiext_handle (wdata, &payload[2 ]); +handler_ext (wdata, &payload[2 ],19 ); }static void handler_drm_KIE (struct wiimote_data *wdata,const __u8 *payload)
@@ -817,14 +1403,14 @@ static void handler_drm_KIE(struct wiimote_data *wdata, const __u8 *payload)ir_to_input1 (wdata, &payload[4 ], true);ir_to_input2 (wdata, &payload[7 ], false);ir_to_input3 (wdata, &payload[9 ], true); -wiiext_handle (wdata, &payload[12 ]); +handler_ext (wdata, &payload[12 ],9 ); }static void handler_drm_KAE (struct wiimote_data *wdata,const __u8 *payload) {handler_keys (wdata, payload);handler_accel (wdata, payload); -wiiext_handle (wdata, &payload[5 ]); +handler_ext (wdata, &payload[5 ],16 ); }static void handler_drm_KAIE (struct wiimote_data *wdata,const __u8 *payload)
@@ -835,12 +1421,12 @@ static void handler_drm_KAIE(struct wiimote_data *wdata, const __u8 *payload)ir_to_input1 (wdata, &payload[7 ], true);ir_to_input2 (wdata, &payload[10 ], false);ir_to_input3 (wdata, &payload[12 ], true); -wiiext_handle (wdata, &payload[15 ]); +handler_ext (wdata, &payload[15 ],6 ); }static void handler_drm_E (struct wiimote_data *wdata,const __u8 *payload) { -wiiext_handle (wdata, payload); +handler_ext (wdata, payload,21 ); }static void handler_drm_SKAI1 (struct wiimote_data *wdata,const __u8 *payload)
@@ -960,16 +1546,27 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev) wdata->state.cmd_battery =0xff ;INIT_WORK (&wdata->init_worker, wiimote_init_worker); +setup_timer (&wdata->timer, wiimote_init_timeout, (long )wdata);return wdata; }static void wiimote_destroy (struct wiimote_data *wdata) { +unsigned long flags; +wiidebug_deinit (wdata); -wiiext_deinit (wdata); + +/* prevent init_worker from being scheduled again */ +spin_lock_irqsave (&wdata->state.lock, flags); + wdata->state.flags |=WIIPROTO_FLAG_EXITING ; +spin_unlock_irqrestore (&wdata->state.lock, flags);cancel_work_sync (&wdata->init_worker); +del_timer_sync (&wdata->timer); + +wiimote_mp_unload (wdata); +wiimote_ext_unload (wdata);wiimote_modules_unload (wdata);cancel_work_sync (&wdata->queue.worker);hid_hw_close (wdata->hdev);
@@ -1010,10 +1607,6 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_stop; } - ret =wiiext_init (wdata); -if (ret) - goto err_free; - ret =wiidebug_init (wdata);if (ret) goto err_free;
@@ -1021,7 +1614,7 @@ static int wiimote_hid_probe(struct hid_device *hdev,hid_info (hdev,"New device registered\n" );/* schedule device detection */ -schedule_work (&wdata->init_worker); +wiimote_schedule (wdata);return 0 ;
drivers/hid/hid-wiimote-modules.c +16 -0
@@ -788,8 +788,19 @@ static const struct wiimod_ops wiimod_ir = { .in_ir = wiimod_ir_in_ir, }; +/* +* Motion Plus +*/ + +const struct wiimod_ops wiimod_mp = { + .flags =0 , + .arg =0 , +}; +/* module table */ +static const struct wiimod_ops wiimod_dummy; +const struct wiimod_ops *wiimod_table[WIIMOD_NUM ] = { [WIIMOD_KEYS ] = &wiimod_keys, [WIIMOD_RUMBLE ] = &wiimod_rumble,
@@ -801,3 +812,8 @@ const struct wiimod_ops *wiimod_table[WIIMOD_NUM] = { [WIIMOD_ACCEL] = &wiimod_accel, [WIIMOD_IR] = &wiimod_ir, }; + +const struct wiimod_ops *wiimod_ext_table[WIIMOTE_EXT_NUM ] = { + [WIIMOTE_EXT_NONE ] = &wiimod_dummy, + [WIIMOTE_EXT_UNKNOWN ] = &wiimod_dummy, +};
drivers/hid/hid-wiimote.h +25 -0
@@ -22,6 +22,7 @@#include <linux/mutex.h> #include <linux/power_supply.h> #include <linux/spinlock.h> +#include <linux/timer.h> #define WIIMOTE_NAME "Nintendo Wii Remote"#define WIIMOTE_BUFSIZE 32
@@ -36,6 +37,12 @@#define WIIPROTO_FLAG_IR_EXT 0x80#define WIIPROTO_FLAG_IR_FULL 0xc0/* IR_BASIC | IR_EXT */ #define WIIPROTO_FLAG_EXT_PLUGGED 0x0100 +#define WIIPROTO_FLAG_EXT_USED 0x0200 +#define WIIPROTO_FLAG_EXT_ACTIVE 0x0400 +#define WIIPROTO_FLAG_MP_PLUGGED 0x0800 +#define WIIPROTO_FLAG_MP_USED 0x1000 +#define WIIPROTO_FLAG_MP_ACTIVE 0x2000 +#define WIIPROTO_FLAG_EXITING 0x4000#define WIIPROTO_FLAGS_LEDS (WIIPROTO_FLAG_LED1 | WIIPROTO_FLAG_LED2 | \ WIIPROTO_FLAG_LED3 | WIIPROTO_FLAG_LED4)
@@ -75,6 +82,14 @@ enum wiimote_exttype { WIIMOTE_EXT_NUM, }; +enum wiimote_mptype { +WIIMOTE_MP_NONE , +WIIMOTE_MP_UNKNOWN , +WIIMOTE_MP_SINGLE , +WIIMOTE_MP_PASSTHROUGH_NUNCHUK , +WIIMOTE_MP_PASSTHROUGH_CLASSIC , +}; +struct wiimote_buf {__u8 data[HID_MAX_BUFFER_SIZE ];size_t size;
@@ -94,6 +109,8 @@ struct wiimote_state {__u8 accel_split[2 ];__u8 drm;__u8 devtype; +__u8 exttype; +__u8 mp;/* synchronous cmd requests */ struct mutex sync;
@@ -115,6 +132,7 @@ struct wiimote_data {struct input_dev *accel;struct input_dev *ir;struct power_supply battery; +struct timer_list timer;struct wiimote_ext *ext;struct wiimote_debug *debug;
@@ -140,6 +158,7 @@ enum wiimod_module { };#define WIIMOD_FLAG_INPUT 0x0001 +#define WIIMOD_FLAG_EXT8 0x0002struct wiimod_ops {__u16 flags;
@@ -153,9 +172,13 @@ struct wiimod_ops {void (*in_accel) (struct wiimote_data *wdata,const __u8 *accel);void (*in_ir) (struct wiimote_data *wdata,const __u8 *ir,bool packed,unsigned int id); +void (*in_mp) (struct wiimote_data *wdata,const __u8 *mp); +void (*in_ext) (struct wiimote_data *wdata,const __u8 *ext); };extern const struct wiimod_ops *wiimod_table[WIIMOD_NUM ]; +extern const struct wiimod_ops *wiimod_ext_table[WIIMOTE_EXT_NUM ]; +extern const struct wiimod_ops wiimod_mp;/* wiimote requests */
@@ -189,6 +212,8 @@ enum wiiproto_reqs {#define dev_to_wii (pdev) hid_get_drvdata(container_of(pdev, struct hid_device, \ dev)) +void __wiimote_schedule (struct wiimote_data *wdata); +extern void wiiproto_req_drm (struct wiimote_data *wdata,__u8 drm);extern void wiiproto_req_rumble (struct wiimote_data *wdata,__u8 rumble);extern void wiiproto_req_leds (struct wiimote_data *wdata,int leds);
Signature · 1 line
1.8.2.1
PATCH 14/21 HID: wiimote: add Balance Board support
In reply to David HerrmannThis adds Nintendo Wii Balance Board support to the new HOTPLUG capable wiimote core. It is mostly copied from the old extension.
This also adds Balance Board device detection. Whenever we find a device that supports the balance-board extension, we assume that it is a real balance board and disable unsupported hardward like accelerometer, IR, rumble and more.
--- drivers/hid/hid-wiimote-core.c | 23 +++++ drivers/hid/hid-wiimote-modules.c | 211 ++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 9 ++ 3 files changed, 243 insertions(+)
drivers/hid/hid-wiimote-core.c +23 -0
@@ -198,6 +198,14 @@ static __u8 select_drm(struct wiimote_data *wdata) ext = (wdata->state.flags &WIIPROTO_FLAG_EXT_USED ) || (wdata->state.flags &WIIPROTO_FLAG_MP_USED ); +/* some 3rd-party balance-boards are hard-coded to KEE, *sigh* */ +if (wdata->state.devtype ==WIIMOTE_DEV_BALANCE_BOARD ) { +if (ext) +return WIIPROTO_REQ_DRM_KEE ; +else +return WIIPROTO_REQ_DRM_K ; + } +if (ir ==WIIPROTO_FLAG_IR_BASIC ) {if (wdata->state.flags &WIIPROTO_FLAG_ACCEL )return WIIPROTO_REQ_DRM_KAIE ;
@@ -425,6 +433,9 @@ static __u8 wiimote_cmd_read_ext(struct wiimote_data *wdata, __u8 *rmem) rmem[3] == 0xff && rmem[4] == 0xff && rmem[5] == 0xff)return WIIMOTE_EXT_NONE ; +if (rmem[4 ] ==0x04 && rmem[5 ] ==0x02 ) +return WIIMOTE_EXT_BALANCE_BOARD ; +return WIIMOTE_EXT_UNKNOWN ; }
@@ -556,6 +567,11 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = { WIIMOD_IR,WIIMOD_NULL , }, + [WIIMOTE_DEV_BALANCE_BOARD] = (const __u8[]) { +WIIMOD_BATTERY , +WIIMOD_LED1 , +WIIMOD_NULL , + }, }; static void wiimote_modules_load(struct wiimote_data *wdata,
@@ -739,6 +755,7 @@ static const char *wiimote_devtype_names[WIIMOTE_DEV_NUM] = { [WIIMOTE_DEV_GENERIC] = "Generic", [WIIMOTE_DEV_GEN10] = "Nintendo Wii Remote (Gen 1)", [WIIMOTE_DEV_GEN20] = "Nintendo Wii Remote Plus (Gen 2)", + [WIIMOTE_DEV_BALANCE_BOARD] = "Nintendo Wii Balance Board", };/* Try to guess the device type based on all collected information. We
@@ -756,6 +773,11 @@ static void wiimote_init_set_type(struct wiimote_data *wdata, product = wdata->hdev->product; name = wdata->hdev->name; +if (exttype ==WIIMOTE_EXT_BALANCE_BOARD ) { + devtype =WIIMOTE_DEV_BALANCE_BOARD ; + goto done; + } +if (vendor ==USB_VENDOR_ID_NINTENDO ) {if (product ==USB_DEVICE_ID_NINTENDO_WIIMOTE ) { devtype =WIIMOTE_DEV_GEN10 ;
@@ -984,6 +1006,7 @@ out_release:static const char *wiimote_exttype_names[WIIMOTE_EXT_NUM ] = { [WIIMOTE_EXT_NONE ] ="None" , [WIIMOTE_EXT_UNKNOWN ] ="Unknown" , + [WIIMOTE_EXT_BALANCE_BOARD ] ="Nintendo Wii Balance Board" , };/*
drivers/hid/hid-wiimote-modules.c +211 -0
221 lines not on this page · raw message
drivers/hid/hid-wiimote.h +9 -0
@@ -73,12 +73,14 @@ enum wiimote_devtype {WIIMOTE_DEV_GENERIC ,WIIMOTE_DEV_GEN10 ,WIIMOTE_DEV_GEN20 , +WIIMOTE_DEV_BALANCE_BOARD , WIIMOTE_DEV_NUM, };enum wiimote_exttype {WIIMOTE_EXT_NONE ,WIIMOTE_EXT_UNKNOWN , +WIIMOTE_EXT_BALANCE_BOARD ,WIIMOTE_EXT_NUM , };
@@ -123,6 +125,9 @@ struct wiimote_state {__u8 cmd_err;__u8 *cmd_read_buf;__u8 cmd_read_size; + +/* calibration data */ +__u16 calib_bboard[4 ][3 ]; };struct wiimote_data {
@@ -136,6 +141,10 @@ struct wiimote_data {struct wiimote_ext *ext;struct wiimote_debug *debug; +union { +struct input_dev *input; + } extension; +struct wiimote_queue queue;struct wiimote_state state;struct work_struct init_worker;
Signature · 1 line
1.8.2.1
PATCH 15/21 HID: wiimote: add Nunchuk support
In reply to David HerrmannThis moves the nunchuk parser over to an extension module. This allows to make use of hotplugged Nunchuks instead of the old static parser.
--- drivers/hid/hid-wiimote-core.c | 6 ++ drivers/hid/hid-wiimote-modules.c | 198 ++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 1 + 3 files changed, 205 insertions(+)
drivers/hid/hid-wiimote-core.c +6 -0
@@ -433,6 +433,8 @@ static __u8 wiimote_cmd_read_ext(struct wiimote_data *wdata, __u8 *rmem) rmem[3] == 0xff && rmem[4] == 0xff && rmem[5] == 0xff)return WIIMOTE_EXT_NONE ; +if (rmem[4 ] ==0x00 && rmem[5 ] ==0x00 ) +return WIIMOTE_EXT_NUNCHUK ;if (rmem[4 ] ==0x04 && rmem[5 ] ==0x02 )return WIIMOTE_EXT_BALANCE_BOARD ;
@@ -467,6 +469,9 @@ static bool wiimote_cmd_map_mp(struct wiimote_data *wdata, __u8 exttype)/* map MP with correct pass-through mode */ switch (exttype) { +case WIIMOTE_EXT_NUNCHUK : + wmem =0x05 ; +break ;default : wmem =0x04 ;break ;
@@ -1006,6 +1011,7 @@ out_release:static const char *wiimote_exttype_names[WIIMOTE_EXT_NUM ] = { [WIIMOTE_EXT_NONE ] ="None" , [WIIMOTE_EXT_UNKNOWN ] ="Unknown" , + [WIIMOTE_EXT_NUNCHUK ] ="Nintendo Wii Nunchuk" , [WIIMOTE_EXT_BALANCE_BOARD ] ="Nintendo Wii Balance Board" , };
drivers/hid/hid-wiimote-modules.c +198 -0
209 lines not on this page · raw message
drivers/hid/hid-wiimote.h +1 -0
@@ -80,6 +80,7 @@ enum wiimote_devtype {enum wiimote_exttype {WIIMOTE_EXT_NONE ,WIIMOTE_EXT_UNKNOWN , +WIIMOTE_EXT_NUNCHUK ,WIIMOTE_EXT_BALANCE_BOARD ,WIIMOTE_EXT_NUM , };
Signature · 1 line
1.8.2.1
PATCH 16/21 HID: wiimote: add Classic Controller extension
In reply to David HerrmannAdd a new extension module for the classic controller so we get hotplug support for this device. It is mostly the same as the old static classic controller parser.
--- drivers/hid/hid-wiimote-core.c | 6 + drivers/hid/hid-wiimote-modules.c | 279 ++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 1 + 3 files changed, 286 insertions(+)
drivers/hid/hid-wiimote-core.c +6 -0
@@ -435,6 +435,8 @@ static __u8 wiimote_cmd_read_ext(struct wiimote_data *wdata, __u8 *rmem)if (rmem[4 ] ==0x00 && rmem[5 ] ==0x00 )return WIIMOTE_EXT_NUNCHUK ; +if (rmem[4 ] ==0x01 && rmem[5 ] ==0x01 ) +return WIIMOTE_EXT_CLASSIC_CONTROLLER ;if (rmem[4 ] ==0x04 && rmem[5 ] ==0x02 )return WIIMOTE_EXT_BALANCE_BOARD ;
@@ -469,6 +471,9 @@ static bool wiimote_cmd_map_mp(struct wiimote_data *wdata, __u8 exttype)/* map MP with correct pass-through mode */ switch (exttype) { +case WIIMOTE_EXT_CLASSIC_CONTROLLER : + wmem =0x07 ; +break ;case WIIMOTE_EXT_NUNCHUK : wmem =0x05 ;break ;
@@ -1012,6 +1017,7 @@ static const char *wiimote_exttype_names[WIIMOTE_EXT_NUM] = { [WIIMOTE_EXT_NONE] = "None", [WIIMOTE_EXT_UNKNOWN] = "Unknown", [WIIMOTE_EXT_NUNCHUK] = "Nintendo Wii Nunchuk", + [WIIMOTE_EXT_CLASSIC_CONTROLLER] = "Nintendo Wii Classic Controller", [WIIMOTE_EXT_BALANCE_BOARD] = "Nintendo Wii Balance Board", };
drivers/hid/hid-wiimote-modules.c +279 -0
290 lines not on this page · raw message
drivers/hid/hid-wiimote.h +1 -0
@@ -81,6 +81,7 @@ enum wiimote_exttype {WIIMOTE_EXT_NONE ,WIIMOTE_EXT_UNKNOWN ,WIIMOTE_EXT_NUNCHUK , +WIIMOTE_EXT_CLASSIC_CONTROLLER ,WIIMOTE_EXT_BALANCE_BOARD , WIIMOTE_EXT_NUM, };
Signature · 1 line
1.8.2.1
PATCH 17/21 HID: wiimote: add Motion Plus extension module
In reply to David HerrmannAdd parsers for motion plus data so we can hotplug motion plus extensions and make use of them. This is mostly the same as the old static motion plus parser.
--- drivers/hid/hid-wiimote-modules.c | 144 ++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 1 + 2 files changed, 145 insertions(+)
drivers/hid/hid-wiimote-modules.c +144 -0
@@ -1475,11 +1475,155 @@ static const struct wiimod_ops wiimod_bboard = {/* * Motion Plus +* The Motion Plus extension provides rotation sensors (gyro) as a small +* extension device for Wii Remotes. Many devices have them built-in so +* you cannot see them from the outside. +* Motion Plus extensions are special because they are on a separate extension +* port and allow other extensions to be used simultaneously. This is all +* handled by the Wiimote Core so we don't have to deal with it. */ +static void wiimod_mp_in_mp (struct wiimote_data *wdata,const __u8 *ext) +{ +__s32 x, y, z; + +/* | 8 7 6 5 4 3 | 2 | 1 | +* -----+------------------------------+-----+-----+ +* 1 | Yaw Speed <7:0> | +* 2 | Roll Speed <7:0> | +* 3 | Pitch Speed <7:0> | +* -----+------------------------------+-----+-----+ +* 4 | Yaw Speed <13:8> | Yaw |Pitch| +* -----+------------------------------+-----+-----+ +* 5 | Roll Speed <13:8> |Roll | Ext | +* -----+------------------------------+-----+-----+ +* 6 | Pitch Speed <13:8> | 1 | 0 | +* -----+------------------------------+-----+-----+ +* The single bits Yaw, Roll, Pitch in the lower right corner specify +* whether the wiimote is rotating fast (0) or slow (1). Speed for slow +* roation is 440 deg/s and for fast rotation 2000 deg/s. To get a +* linear scale we multiply by 2000/440 = ~4.5454 which is 18 for fast +* and 9 for slow. +* If the wiimote is not rotating the sensor reports 2^13 = 8192. +* Ext specifies whether an extension is connected to the motionp. +* which is parsed by wiimote-core. +*/ + + x = ext[0 ]; + y = ext[1 ]; + z = ext[2 ]; + + x |= (((__u16 )ext[3 ]) <<6 ) &0xff00 ; + y |= (((__u16 )ext[4 ]) <<6 ) &0xff00 ; + z |= (((__u16 )ext[5 ]) <<6 ) &0xff00 ; + + x -=8192 ; + y -=8192 ; + z -=8192 ; + +if (!(ext[3 ] &0x02 )) + x *=18 ; +else + x *=9 ; +if (!(ext[4 ] &0x02 )) + y *=18 ; +else + y *=9 ; +if (!(ext[3 ] &0x01 )) + z *=18 ; +else + z *=9 ; + +input_report_abs (wdata->mp,ABS_RX , x); +input_report_abs (wdata->mp,ABS_RY , y); +input_report_abs (wdata->mp,ABS_RZ , z); +input_sync (wdata->mp); +} + +static int wiimod_mp_open (struct input_dev *dev) +{ +struct wiimote_data *wdata =input_get_drvdata (dev); +unsigned long flags; + +spin_lock_irqsave (&wdata->state.lock, flags); + wdata->state.flags |=WIIPROTO_FLAG_MP_USED ; +wiiproto_req_drm (wdata,WIIPROTO_REQ_NULL ); +__wiimote_schedule (wdata); +spin_unlock_irqrestore (&wdata->state.lock, flags); + +return 0 ; +} + +static void wiimod_mp_close (struct input_dev *dev) +{ +struct wiimote_data *wdata =input_get_drvdata (dev); +unsigned long flags; + +spin_lock_irqsave (&wdata->state.lock, flags); + wdata->state.flags &= ~WIIPROTO_FLAG_MP_USED ; +wiiproto_req_drm (wdata,WIIPROTO_REQ_NULL ); +__wiimote_schedule (wdata); +spin_unlock_irqrestore (&wdata->state.lock, flags); +} + +static int wiimod_mp_probe (const struct wiimod_ops *ops, +struct wiimote_data *wdata) +{ +int ret; + + wdata->mp =input_allocate_device (); +if (!wdata->mp) +return -ENOMEM ; + +input_set_drvdata (wdata->mp, wdata); + wdata->mp->open = wiimod_mp_open; + wdata->mp->close = wiimod_mp_close; + wdata->mp->dev.parent = &wdata->hdev->dev; + wdata->mp->id.bustype = wdata->hdev->bus; + wdata->mp->id.vendor = wdata->hdev->vendor; + wdata->mp->id.product = wdata->hdev->product; + wdata->mp->id.version = wdata->hdev->version; + wdata->mp->name =WIIMOTE_NAME " Motion Plus" ; + +set_bit (EV_ABS , wdata->mp->evbit); +set_bit (ABS_RX , wdata->mp->absbit); +set_bit (ABS_RY , wdata->mp->absbit); +set_bit (ABS_RZ , wdata->mp->absbit); +input_set_abs_params (wdata->mp, +ABS_RX ,-16000 ,16000 ,4 ,8 ); +input_set_abs_params (wdata->mp, +ABS_RY ,-16000 ,16000 ,4 ,8 ); +input_set_abs_params (wdata->mp, +ABS_RZ ,-16000 ,16000 ,4 ,8 ); + + ret =input_register_device (wdata->mp); +if (ret) + goto err_free; + +return 0 ; + +err_free: +input_free_device (wdata->mp); + wdata->mp =NULL ; +return ret; +} + +static void wiimod_mp_remove (const struct wiimod_ops *ops, +struct wiimote_data *wdata) +{ +if (!wdata->mp) +return ; + +input_unregister_device (wdata->mp); + wdata->mp =NULL ; +} +const struct wiimod_ops wiimod_mp = { .flags =0 , .arg =0 , + .probe = wiimod_mp_probe, + .remove = wiimod_mp_remove, + .in_mp = wiimod_mp_in_mp, };/* module table */
drivers/hid/hid-wiimote.h +1 -0
@@ -139,6 +139,7 @@ struct wiimote_data {struct input_dev *accel;struct input_dev *ir;struct power_supply battery; +struct input_dev *mp;struct timer_list timer;struct wiimote_ext *ext;struct wiimote_debug *debug;
Signature · 1 line
1.8.2.1
PATCH 18/21 HID: wiimote: fix ctx pointer in debugfs DRM-write
In reply to David Herrmannsingle_open() stores the seq_file pointer in file->private_data. It stores our ctx pointer in seq_file->private.
--- drivers/hid/hid-wiimote-debug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/hid/hid-wiimote-debug.c +2 -1
@@ -127,7 +127,8 @@ static int wiidebug_drm_open(struct inode *i, struct file *f)static ssize_t wiidebug_drm_write (struct file *f,const char __user *u,size_t s,loff_t *off) { -struct wiimote_debug *dbg = f->private_data; +struct seq_file *sf = f->private_data; +struct wiimote_debug *dbg = sf->private;unsigned long flags;char buf[16 ];ssize_t len;
Signature · 1 line
1.8.2.1
PATCH 19/21 HID: wiimote: lock DRM mode during debugfs overwrite
In reply to David HerrmannIf we write a DRM mode via debugfs, we shouldn't allow normal operations to overwrite this DRM mode. This is important if we want to debug 3rd-party devices and we want to see what data is sent on each mode.
If we write NULL/0 as DRM, the lock is removed again so the best matching DRM is chosen by wiimote core.
--- drivers/hid/hid-wiimote-core.c | 4 +++- drivers/hid/hid-wiimote-debug.c | 3 +++ drivers/hid/hid-wiimote.h | 1 + 3 files changed, 7 insertions(+), 1 deletion(-)
drivers/hid/hid-wiimote-core.c +3 -1
@@ -234,7 +234,9 @@ void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm) {__u8 cmd[3 ]; -if (drm ==WIIPROTO_REQ_NULL ) +if (wdata->state.flags &WIIPROTO_FLAG_DRM_LOCKED ) + drm = wdata->state.drm; +else if (drm ==WIIPROTO_REQ_NULL ) drm =select_drm (wdata); cmd[0 ] =WIIPROTO_REQ_DRM ;
drivers/hid/hid-wiimote-debug.c +3 -0
@@ -154,7 +154,10 @@ static ssize_t wiidebug_drm_write(struct file *f, const char __user *u, i =simple_strtoul (buf,NULL ,10 );spin_lock_irqsave (&dbg->wdata->state.lock, flags); + dbg->wdata->state.flags &= ~WIIPROTO_FLAG_DRM_LOCKED ;wiiproto_req_drm (dbg->wdata, (__u8 ) i); +if (i !=WIIPROTO_REQ_NULL ) + dbg->wdata->state.flags |=WIIPROTO_FLAG_DRM_LOCKED ;spin_unlock_irqrestore (&dbg->wdata->state.lock, flags);return len;
drivers/hid/hid-wiimote.h +1 -0
@@ -43,6 +43,7 @@#define WIIPROTO_FLAG_MP_USED 0x1000#define WIIPROTO_FLAG_MP_ACTIVE 0x2000#define WIIPROTO_FLAG_EXITING 0x4000 +#define WIIPROTO_FLAG_DRM_LOCKED 0x8000#define WIIPROTO_FLAGS_LEDS (WIIPROTO_FLAG_LED1 | WIIPROTO_FLAG_LED2 | \ WIIPROTO_FLAG_LED3 | WIIPROTO_FLAG_LED4)
Signature · 1 line
1.8.2.1
PATCH 20/21 HID: wiimote: add sysfs extension/device-type attrs
In reply to David HerrmannTwo new attributes, "extension" and "device" now allow user-space to read the extension type and device type. As device detection is asynchronous, we send a CHANGED event after it is done. This also allows user-space to wait for a device to settle before opening its input event devices.
--- drivers/hid/hid-wiimote-core.c | 106 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 105 insertions(+), 1 deletion(-)
drivers/hid/hid-wiimote-core.c +105 -1
@@ -1139,11 +1139,18 @@ static void wiimote_init_worker(struct work_struct *work) { struct wiimote_data *wdata = container_of(work, struct wiimote_data, init_worker); +bool changed = false; -if (wdata->state.devtype ==WIIMOTE_DEV_PENDING ) +if (wdata->state.devtype ==WIIMOTE_DEV_PENDING ) {wiimote_init_detect (wdata); + changed = true; + } +if (!wiimote_init_check (wdata))wiimote_init_hotplug (wdata); + +if (changed) +kobject_uevent (&wdata->hdev->dev.kobj,KOBJ_CHANGE ); }void __wiimote_schedule (struct wiimote_data *wdata)
@@ -1562,6 +1569,84 @@ static int wiimote_hid_event(struct hid_device *hdev, struct hid_report *report,return 0 ; } +static ssize_t wiimote_ext_show (struct device *dev, +struct device_attribute *attr, +char *buf) +{ +struct wiimote_data *wdata =dev_to_wii (dev); +__u8 type; +unsigned long flags; + +spin_lock_irqsave (&wdata->state.lock, flags); + type = wdata->state.exttype; +spin_unlock_irqrestore (&wdata->state.lock, flags); + +switch (type) { +case WIIMOTE_EXT_NONE : +return sprintf (buf,"none\n" ); +case WIIMOTE_EXT_NUNCHUK : +return sprintf (buf,"nunchuk\n" ); +case WIIMOTE_EXT_CLASSIC_CONTROLLER : +return sprintf (buf,"classic\n" ); +case WIIMOTE_EXT_BALANCE_BOARD : +return sprintf (buf,"balanceboard\n" ); +case WIIMOTE_EXT_UNKNOWN : +/* fallthrough */ +default : +return sprintf (buf,"unknown\n" ); + } +} + +static ssize_t wiimote_ext_store (struct device *dev, +struct device_attribute *attr, +const char *buf,size_t count) +{ +struct wiimote_data *wdata =dev_to_wii (dev); + +if (!strcmp (buf,"scan" )) { +wiimote_schedule (wdata); + }else { +return -EINVAL ; + } + +return strnlen (buf,PAGE_SIZE ); +} + +static DEVICE_ATTR(extension, S_IRUGO | S_IWUSR | S_IWGRP, wiimote_ext_show, + wiimote_ext_store); + +static ssize_t wiimote_dev_show (struct device *dev, +struct device_attribute *attr, +char *buf) +{ +struct wiimote_data *wdata =dev_to_wii (dev); +__u8 type; +unsigned long flags; + +spin_lock_irqsave (&wdata->state.lock, flags); + type = wdata->state.devtype; +spin_unlock_irqrestore (&wdata->state.lock, flags); + +switch (type) { +case WIIMOTE_DEV_GENERIC : +return sprintf (buf,"none\n" ); +case WIIMOTE_DEV_GEN10 : +return sprintf (buf,"gen10\n" ); +case WIIMOTE_DEV_GEN20 : +return sprintf (buf,"gen20\n" ); +case WIIMOTE_DEV_BALANCE_BOARD : +return sprintf (buf,"balanceboard\n" ); +case WIIMOTE_DEV_PENDING : +return sprintf (buf,"pending\n" ); +case WIIMOTE_DEV_UNKNOWN : +/* fallthrough */ +default : +return sprintf (buf,"unknown\n" ); + } +} + +static DEVICE_ATTR(device, S_IRUGO, wiimote_dev_show, NULL); +static struct wiimote_data *wiimote_create (struct hid_device *hdev) {struct wiimote_data *wdata;
@@ -1602,6 +1687,9 @@ static void wiimote_destroy(struct wiimote_data *wdata)cancel_work_sync (&wdata->init_worker);del_timer_sync (&wdata->timer); +device_remove_file (&wdata->hdev->dev, &dev_attr_device); +device_remove_file (&wdata->hdev->dev, &dev_attr_extension); +wiimote_mp_unload (wdata);wiimote_ext_unload (wdata);wiimote_modules_unload (wdata);
@@ -1644,6 +1732,18 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_stop; } + ret =device_create_file (&hdev->dev, &dev_attr_extension); +if (ret) { +hid_err (hdev,"cannot create sysfs attribute\n" ); + goto err_close; + } + + ret =device_create_file (&hdev->dev, &dev_attr_device); +if (ret) { +hid_err (hdev,"cannot create sysfs attribute\n" ); + goto err_ext; + } + ret =wiidebug_init (wdata);if (ret) goto err_free;
@@ -1659,6 +1759,10 @@ err_free:wiimote_destroy (wdata);return ret; +err_ext: +device_remove_file (&wdata->hdev->dev, &dev_attr_extension); +err_close: +hid_hw_close (hdev); err_stop:hid_hw_stop (hdev); err:
Signature · 1 line
1.8.2.1
PATCH 21/21 HID: wiimote: add "bboard_calib" attribute
In reply to David HerrmannBalance-Boards provide 3 16bit calibration values for each of the 4 sensors. We provide these now as 192bit value via a new "bboard_calib" sysfs attribute.
We also re-read the calibration data from the device whenever user-space attempts to read this file. On normal Nintendo boards, this always produces the same results, however, on some 3rd party devices these values change until the device is fully initialized. As I have currently no idea how long to wait until it's ready (sometimes takes up to 10s?) we provide a simple workaround for users by reading this file.
If we, at some point, figure out how it works, we can implement it in the kernel and provide offline data via "bboard_calib". This won't break user-space then.
--- drivers/hid/hid-wiimote-modules.c | 68 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 67 insertions(+), 1 deletion(-)
drivers/hid/hid-wiimote-modules.c +67 -1
@@ -1380,6 +1380,60 @@ static void wiimod_bboard_close(struct input_dev *dev)spin_unlock_irqrestore (&wdata->state.lock, flags); } +static ssize_t wiimod_bboard_calib_show (struct device *dev, +struct device_attribute *attr, +char *out) +{ +struct wiimote_data *wdata =dev_to_wii (dev); +int i, j, ret; +__u16 val; +__u8 buf[24 ], offs; + + ret =wiimote_cmd_acquire (wdata); +if (ret) +return ret; + + ret =wiimote_cmd_read (wdata,0xa40024 , buf,12 ); +if (ret !=12 ) { +wiimote_cmd_release (wdata); +return ret <0 ? ret : -EIO ; + } + ret =wiimote_cmd_read (wdata,0xa40024 +12 , buf +12 ,12 ); +if (ret !=12 ) { +wiimote_cmd_release (wdata); +return ret <0 ? ret : -EIO ; + } + +wiimote_cmd_release (wdata); + +spin_lock_irq (&wdata->state.lock); + offs =0 ; +for (i =0 ; i <3 ; ++i) { +for (j =0 ; j <4 ; ++j) { + wdata->state.calib_bboard[j][i] = buf[offs]; + wdata->state.calib_bboard[j][i] <<=8 ; + wdata->state.calib_bboard[j][i] |= buf[offs +1 ]; + offs +=2 ; + } + } +spin_unlock_irq (&wdata->state.lock); + + ret =0 ; +for (i =0 ; i <3 ; ++i) { +for (j =0 ; j <4 ; ++j) { + val = wdata->state.calib_bboard[j][i]; +if (i ==2 && j ==3 ) + ret +=sprintf (&out[ret],"%04x\n" , val); +else + ret +=sprintf (&out[ret],"%04x:" , val); + } + } + +return ret; +} + +static DEVICE_ATTR(bboard_calib, S_IRUGO, wiimod_bboard_calib_show, NULL); +static int wiimod_bboard_probe (const struct wiimod_ops *ops,struct wiimote_data *wdata) {
@@ -1415,6 +1469,13 @@ static int wiimod_bboard_probe(const struct wiimod_ops *ops,if (!wdata->extension.input)return -ENOMEM ; + ret =device_create_file (&wdata->hdev->dev, + &dev_attr_bboard_calib); +if (ret) { +hid_err (wdata->hdev,"cannot create sysfs attribute\n" ); + goto err_free; + } +input_set_drvdata (wdata->extension.input, wdata); wdata->extension.input->open = wiimod_bboard_open; wdata->extension.input->close = wiimod_bboard_close;
@@ -1444,10 +1505,13 @@ static int wiimod_bboard_probe(const struct wiimod_ops *ops, ret =input_register_device (wdata->extension.input);if (ret) - goto err_free; + goto err_file;return 0 ; +err_file: +device_remove_file (&wdata->hdev->dev, + &dev_attr_bboard_calib); err_free:input_free_device (wdata->extension.input); wdata->extension.input =NULL ;
@@ -1462,6 +1526,8 @@ static void wiimod_bboard_remove(const struct wiimod_ops *ops,input_unregister_device (wdata->extension.input); wdata->extension.input =NULL ; +device_remove_file (&wdata->hdev->dev, + &dev_attr_bboard_calib); }static const struct wiimod_ops wiimod_bboard = {
Signature · 1 line
1.8.2.1
Quoted 6 lines · David Herrmann
Also please don't merge it, yet. I still have to remove
hid-wiimote-ext.cas it is no longer needed, but I haven't tested how this affects backwards-compatibility. I did my best to not break existing user-space, but I want to do some more tests. So if there are no comments on this series, I will resend in about 1 week with a ready-to-merge series. But I wanted to see whether anyone has issues with the patches, first.
Hi David,
thanks a lot for this non-trivial amount of work you have done on the wiimote driver.
I admit I haven't performed a full and 100% proper review of the patchset yet, but on a first sight it seemed quite fine to me. So please proceed with sending the respin ready for merge, as far as I am concerned.
Quoted 5 lines
Some sidenotes:
- Marcel already ACK'ed my Bluetooth HIDP rewrite which finally gives us working Bluetooth HID without any kernel oops. Gustavo is currently applying the patches. This series doesn't exactly depend on it, but you cannot test Bluetooth device hotplugging without it, because the kernel just breaks.
Awesome, didn't know that this is happening.
Quoted 4 lines
Last but not least I noticed that we duplicate the HID Boot Protocol in usbhid and Bluetooth HID. The Wifi-Display HID also provides some similar protocol. So I currently look into creating a
hid-boot.cso we have a central place that implements it.
Makes sense to me as well.
Thanks a lot, David.
Signature · 2 lines
Jiri Kosina SUSE Labs