powerpc: CONFIG_OF_CONTROL support
PATCH 1/1 powerpc: CONFIG_OF_CONTROL support
Allow a device tree to be provided through the standard mechanisms.
Tests have been made using CONFIG_OF_SEPERATE on a MPC8378 board.
Jonathan Klee (1):
powerpc: Add support for CONFIG_OF_CONTROL
arch/powerpc/lib/board.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
Signature · 1 line
1.7.10.4
PATCH 1/1 powerpc: Add support for CONFIG_OF_CONTROL
Allow a device tree to be provided through the standard mechanisms.
Tests have been made using CONFIG_OF_SEPERATE on a MPC8378 board.
--- arch/powerpc/lib/board.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
arch/powerpc/lib/board.c +22 -0
@@ -26,6 +26,8 @@#include <command.h> #include <malloc.h> #include <stdio_dev.h> +#include <libfdt.h> +#include <fdtdec.h> #ifdef CONFIG_8xx#include <mpc8xx.h> #endif
@@ -124,6 +126,7 @@ DECLARE_GLOBAL_DATA_PTR;extern ulong __init_end;extern ulong __bss_end; +extern ulong __stop___ex_table;ulong monitor_flash_len;#if defined(CONFIG_CMD_BEDBUG )
@@ -255,6 +258,21 @@ int init_func_watchdog_reset(void)* Initialization sequence */ +#ifdef CONFIG_OF_CONTROL +int find_fdt (void ) +{ +#ifdef CONFIG_OF_EMBED +/* get a pointer to the FDT */ + gd->fdt_blob = _binary_dt_dtb_start; +#elif definedCONFIG_OF_SEPARATE + gd->fdt_blob = (void *)&__stop___ex_table; +#endif + gd->fdt_blob = (void *)getenv_ulong ("fdtcontroladdr" ,16 , + (uintptr_t )gd->fdt_blob); +return 0 ; +} +#endif + static init_fnc_t *init_sequence[] = {#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) probecpu,
@@ -321,6 +339,10 @@ static init_fnc_t *init_sequence[] = {#endif INIT_FUNC_WATCHDOG_RESET init_func_ram, +#ifdef CONFIG_OF_CONTROL + find_fdt, + fdtdec_check_fdt, +#endif #if defined(CONFIG_SYS_DRAM_TEST ) testdram,#endif /* CONFIG_SYS_DRAM_TEST */
Signature · 1 line
1.7.10.4
PATCH 1/1 powerpc: Add support for CONFIG_OF_CONTROL
Quoted 3 lines · Jonathan Klee
Allow a device tree to be provided through the standard mechanisms.
Tests have been made using
CONFIG_OF_SEPERATEon a MPC8378 board.
SEPARATE
Quoted 9 lines
--- arch/powerpc/lib/board.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)arch/powerpc/lib/board.c +0
-0
arch/powerpc/lib/board.c line 30
Quoted 5 lines
arch/powerpc/lib/board.c +2
-0@@ -26,6 +26,8 @@#include <command.h> #include <malloc.h> #include <stdio_dev.h> +#include <libfdt.h> +#include <fdtdec.h>
Please put in alphabetical order.
arch/powerpc/lib/board.c DECLARE_GLOBAL_DATA_PTR; · line 129
Quoted 8 lines
arch/powerpc/lib/board.c +1
-0#ifdef CONFIG_8xx#include <mpc8xx.h> #endif @@ -124,6 +126,7 @@ DECLARE_GLOBAL_DATA_PTR;extern ulong __init_end;extern ulong __bss_end; +extern ulong __stop___ex_table;
Where does this name come from - objcopy?
Quoted 37 lines
arch/powerpc/lib/board.c +19
-1ulong monitor_flash_len;#if defined(CONFIG_CMD_BEDBUG )@@ -255,6 +258,21 @@ int init_func_watchdog_reset(void)* Initialization sequence */ +#ifdef CONFIG_OF_CONTROL +int find_fdt (void ) +{ +#ifdef CONFIG_OF_EMBED +/* get a pointer to the FDT */ + gd->fdt_blob = _binary_dt_dtb_start; +#elif definedCONFIG_OF_SEPARATE + gd->fdt_blob = (void *)&__stop___ex_table; +#endif + gd->fdt_blob = (void *)getenv_ulong ("fdtcontroladdr" ,16 , + (uintptr_t )gd->fdt_blob); +return 0 ; +} +#endif + static init_fnc_t *init_sequence[] = {#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) probecpu,@@ -321,6 +339,10 @@ static init_fnc_t *init_sequence[] = {#endif INIT_FUNC_WATCHDOG_RESET init_func_ram, +#ifdef CONFIG_OF_CONTROL + find_fdt, + fdtdec_check_fdt, +#endif #if defined(CONFIG_SYS_DRAM_TEST ) testdram,#endif /* CONFIG_SYS_DRAM_TEST */ --
Quoted 2 lines
1.7.10.4
I'm also interested in whether you can get CONFIG_SYS_GENERIC_BOARD going on your board?
Regards,
Simon