ARM:Panda:Fix device tree loading for the panda-es
PATCH 1/2 ARM:Panda:Fix device tree loading for the panda-es
Fix the device tree loading for panda(4430) and panda-es(4460)
Modify the board name if a 4460 panda or panda-es is detected at run time.
In the findfdt add a check for the panda-es board name and load the panda-es device tree blob.
--- board/ti/panda/panda.c | 6 ++++++ include/configs/omap4_common.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)
board/ti/panda/panda.c +6 -0
@@ -82,6 +82,12 @@ int misc_init_r(void)if (omap_revision () ==OMAP4430_ES1_0 )return 0 ; +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +if (omap_revision () >=OMAP4460_ES1_0 || +omap_revision () <=OMAP4460_ES1_1 ) +setenv ("board_name" ,strcat (CONFIG_SYS_BOARD ,"-es" )); +#endif +gpio_direction_input (PANDA_ULPI_PHY_TYPE_GPIO ); phy_type =gpio_get_value (PANDA_ULPI_PHY_TYPE_GPIO );
include/configs/omap4_common.h +3 -1
@@ -176,7 +176,9 @@"if test $board_name = sdp4430; then " \"setenv fdtfile omap4-sdp.dtb; fi; " \"if test $board_name = panda; then " \ -"setenv fdtfile omap4-panda-es.dtb; fi\0" \ +"setenv fdtfile omap4-panda.dtb; fi;" \ +"if test $board_name = panda-es; then " \ +"setenv fdtfile omap4-panda-es.dtb; fi; \0" \"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ #define CONFIG_BOOTCOMMAND \
Signature · 1 line
1.7.9.5
PATCH 1/2 ARM:Panda:Fix device tree loading for the panda-es
+ Sricharan
Quoted 45 lines · Dan Murphy
Fix the device tree loading for panda(4430) and panda-es(4460)
Modify the board name if a 4460 panda or panda-es is detected at run time.
In the findfdt add a check for the panda-es board name and load the panda-es device tree blob.Signed-off-by Dan Murphy <[email protected]>--- board/ti/panda/panda.c | 6 ++++++ include/configs/omap4_common.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)board/ti/panda/panda.c +6
-0@@ -82,6 +82,12 @@ int misc_init_r(void)if (omap_revision () ==OMAP4430_ES1_0 )return 0 ; +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +if (omap_revision () >=OMAP4460_ES1_0 || +omap_revision () <=OMAP4460_ES1_1 ) +setenv ("board_name" ,strcat (CONFIG_SYS_BOARD ,"-es" )); +#endif +gpio_direction_input (PANDA_ULPI_PHY_TYPE_GPIO ); phy_type =gpio_get_value (PANDA_ULPI_PHY_TYPE_GPIO );include/configs/omap4_common.h +3
-1@@ -176,7 +176,9 @@"if test $board_name = sdp4430; then " \"setenv fdtfile omap4-sdp.dtb; fi; " \"if test $board_name = panda; then " \ -"setenv fdtfile omap4-panda-es.dtb; fi\0" \ +"setenv fdtfile omap4-panda.dtb; fi;" \ +"if test $board_name = panda-es; then " \ +"setenv fdtfile omap4-panda-es.dtb; fi; \0" \"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ #define CONFIG_BOOTCOMMAND \
PATCH 1/2 ARM:Panda:Fix device tree loading for the panda-es
Bump
Quoted 47 lines · Dan Murphy
+ Sricharan
Quoted 45 lines · Dan Murphy
Fix the device tree loading for panda(4430) and panda-es(4460)
Modify the board name if a 4460 panda or panda-es is detected at run time.
In the findfdt add a check for the panda-es board name and load the panda-es device tree blob.Signed-off-by Dan Murphy <[email protected]>--- board/ti/panda/panda.c | 6 ++++++ include/configs/omap4_common.h | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)board/ti/panda/panda.c +6
-0@@ -82,6 +82,12 @@ int misc_init_r(void)if (omap_revision () ==OMAP4430_ES1_0 )return 0 ; +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +if (omap_revision () >=OMAP4460_ES1_0 || +omap_revision () <=OMAP4460_ES1_1 ) +setenv ("board_name" ,strcat (CONFIG_SYS_BOARD ,"-es" )); +#endif +gpio_direction_input (PANDA_ULPI_PHY_TYPE_GPIO ); phy_type =gpio_get_value (PANDA_ULPI_PHY_TYPE_GPIO );include/configs/omap4_common.h +3
-1@@ -176,7 +176,9 @@"if test $board_name = sdp4430; then " \"setenv fdtfile omap4-sdp.dtb; fi; " \"if test $board_name = panda; then " \ -"setenv fdtfile omap4-panda-es.dtb; fi\0" \ +"setenv fdtfile omap4-panda.dtb; fi;" \ +"if test $board_name = panda-es; then " \ +"setenv fdtfile omap4-panda-es.dtb; fi; \0" \"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ #define CONFIG_BOOTCOMMAND \
PATCH 2/2 ARM: Panda: Add flag to allow runtime enviroment varibale mods
In reply to Dan MurphyAdd the flag to allow runtime enviroment variable modifications. This is being added so that the board-name can be modified at runtime to indicate either a panda(4430) or a panda-es(4460)
--- include/configs/omap4_panda.h | 2 ++ 1 file changed, 2 insertions(+)
include/configs/omap4_panda.h +2 -0
@@ -66,4 +66,6 @@#define CONFIG_SYS_PROMPT "Panda # " +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#endif /* __CONFIG_PANDA_H */
Signature · 1 line
1.7.9.5
PATCH 2/2 ARM: Panda: Add flag to allow runtime enviroment varibale mods
+ Sricharan
Quoted 20 lines · Dan Murphy
Add the flag to allow runtime enviroment variable modifications. This is being added so that the board-name can be modified at runtime to indicate either a panda(4430) or a panda-es(4460)
Signed-off-by Dan Murphy <[email protected]>--- include/configs/omap4_panda.h | 2 ++ 1 file changed, 2 insertions(+)include/configs/omap4_panda.h +2
-0@@ -66,4 +66,6 @@#define CONFIG_SYS_PROMPT "Panda # " +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#endif /* __CONFIG_PANDA_H */
PATCH 2/2 ARM: Panda: Add flag to allow runtime enviroment varibale mods
Bump
Quoted 22 lines · Dan Murphy
+ Sricharan
Quoted 20 lines · Dan Murphy
Add the flag to allow runtime enviroment variable modifications. This is being added so that the board-name can be modified at runtime to indicate either a panda(4430) or a panda-es(4460)
Signed-off-by Dan Murphy <[email protected]>--- include/configs/omap4_panda.h | 2 ++ 1 file changed, 2 insertions(+)include/configs/omap4_panda.h +2
-0@@ -66,4 +66,6 @@#define CONFIG_SYS_PROMPT "Panda # " +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#endif /* __CONFIG_PANDA_H */
PATCH 1/2 ARM:Panda:Fix device tree loading for the panda-es
In reply to Dan MurphyQuoted 8 lines · Dan Murphy
Fix the device tree loading for panda(4430) and panda-es(4460)
Modify the board name if a 4460 panda or panda-es is detected at run time.
In the findfdt add a check for the panda-es board name and load the panda-es device tree blob.Signed-off-by Dan Murphy <[email protected]>
Along with 2/2, applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130429/fc9c82f9/attachment.pgp>