libpcap: Fix up patches
PATCH 1/1 libpcap: Fix up patches
These patches where tweaking both configure.in and configure, which is bad since configure changes after an autoconf. If the patch is re-applied for some reason it would notice that it's already appiled and fails.
[YOCTO #4314]
Signed-off-by Saul Wold <[email protected]>
--- .../libpcap-1.3.0/0001-Fix-disable-canusb.patch |14201 +------------------- ...-The-leading-comma-looked-weird-remove-it.patch | 23 +- .../libpcap-1.3.0/0001-canusb-needs-lpthread.patch | 17 +- 3 files changed, 19 insertions(+), 14222 deletions(-)
meta/recipes-connectivity/libpcap/libpcap-1.3.0/0001-Fix-disable-canusb.patch +3 -14198
@@ -6,10 +6,12 @@ Date: Wed, 13 Jun 2012 12:09:21 -0700 Subject: [PATCH] Fix --disable-canusb. Reviewed-By: Guy Harris <[email protected]> + +sgw - Removed configure part of the patch since it could change +Signed-off-by: Saul Wold <[email protected]> --- config.h.in | 3 - configure |10672 ++++++++++++++++++++++++++++++++++++++++------------------ - configure.in | 2 +- 3 files changed, 7308 insertions(+), 3369 deletions(-) diff --git a/config.h.in b/config.h.in
@@ -26,14200 +28,3 @@ index bd5177c..aed5c37 100644 /* Define to the version of this package. */ #undef PACKAGE_VERSION -diff --git a/configure b/configure -index 29e0f35..b8b29be 100755 ---- a/configure -+++ b/configure -@@ -1,84 +1,61 @@ - #! /bin/sh - # From configure.in Revision: 1.168 . - # Guess values for system-dependent variables and create Makefiles. --# Generated by GNU Autoconf 2.67. --# -+# Generated by GNU Autoconf 2.61. - # - # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, --# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software --# Foundation, Inc. --# --# -+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. - # This configure script is free software; the Free Software Foundation - # gives unlimited permission to copy, distribute and modify it. --## -------------------- ## --## M4sh Initialization. ## --## -------------------- ## -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## - - # Be more Bourne compatible - DUALCASE=1; export DUALCASE # for MKS sh --if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: -- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST - else -- case `(set -o) 2>/dev/null` in #( -- *posix*) : -- set -o posix ;; #( -- *) : -- ;; -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; - esac -+ - fi - - --as_nl=' --' --export as_nl --# Printing a long string crashes Solaris 7 /usr/bin/printf. --as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' --as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo --as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo --# Prefer a ksh shell builtin over an external printf program on Solaris, --# but without wasting forks for bash or zsh. --if test -z "$BASH_VERSION$ZSH_VERSION" \ -- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then -- as_echo='print -r --' -- as_echo_n='print -rn --' --elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then -- as_echo='printf %s\n' -- as_echo_n='printf %s' --else -- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then -- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' -- as_echo_n='/usr/ucb/echo -n' -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' - else -- as_echo_body='eval expr "X$1" : "X\\(.*\\)"' -- as_echo_n_body='eval -- arg=$1; -- case $arg in #( -- *"$as_nl"*) -- expr "X$arg" : "X\\(.*\\)$as_nl"; -- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; -- esac; -- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" -- ' -- export as_echo_n_body -- as_echo_n='sh -c $as_echo_n_body as_echo' -+ PATH_SEPARATOR=: - fi -- export as_echo_body -- as_echo='sh -c $as_echo_body as_echo' -+ rm -f conf$$.sh - fi - --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- PATH_SEPARATOR=: -- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { -- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || -- PATH_SEPARATOR=';' -- } -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false - fi - - -@@ -87,18 +64,20 @@ fi - # there to prevent editors from complaining about space-tab. - # (If _AS_PATH_WALK were called with IFS unset, it would disable word - # splitting by setting IFS to empty value.) -+as_nl=' -+' - IFS=" "" $as_nl" - - # Find who we are. Look in the path if we contain no directory separator. --case $0 in #(( -+case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -- done -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done - IFS=$as_save_IFS - - ;; -@@ -109,270 +88,32 @@ if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then -- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -- exit 1 -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } - fi - --# Unset variables that we do not need and which cause bugs (e.g. in --# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" --# suppresses any "Segmentation fault" message there. '((' could --# trigger a bug in pdksh 5.2.14. --for as_var in BASH_ENV ENV MAIL MAILPATH --do eval test x\${$as_var+set} = xset \ -- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -+# Work around bugs in pre-3.0 UWIN ksh. -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done - PS1='$ ' - PS2='> ' - PS4='+ ' - - # NLS nuisances. --LC_ALL=C --export LC_ALL --LANGUAGE=C --export LANGUAGE -- --# CDPATH. --(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -- --if test "x$CONFIG_SHELL" = x; then -- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : -- emulate sh -- NULLCMD=: -- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which -- # is contrary to our usage. Disable this feature. -- alias -g '\${1+\"\$@\"}'='\"\$@\"' -- setopt NO_GLOB_SUBST --else -- case \`(set -o) 2>/dev/null\` in #( -- *posix*) : -- set -o posix ;; #( -- *) : -- ;; --esac --fi --" -- as_required="as_fn_return () { (exit \$1); } --as_fn_success () { as_fn_return 0; } --as_fn_failure () { as_fn_return 1; } --as_fn_ret_success () { return 0; } --as_fn_ret_failure () { return 1; } -- --exitcode=0 --as_fn_success || { exitcode=1; echo as_fn_success failed.; } --as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } --as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } --as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } --if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : -- --else -- exitcode=1; echo positional parameters were not saved. --fi --test x\$exitcode = x0 || exit 1" -- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO -- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO -- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && -- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 --test \$(( 1 + 1 )) = 2 || exit 1" -- if (eval "$as_required") 2>/dev/null; then : -- as_have_required=yes --else -- as_have_required=no --fi -- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : -- --else -- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --as_found=false --for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME - do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- as_found=: -- case $as_dir in #( -- /*) -- for as_base in sh bash ksh sh5; do -- # Try only shells that exist, to save several forks. -- as_shell=$as_dir/$as_base -- if { test -f "$as_shell" || test -f "$as_shell.exe"; } && -- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : -- CONFIG_SHELL=$as_shell as_have_required=yes -- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : -- break 2 --fi --fi -- done;; -- esac -- as_found=false --done --$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && -- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : -- CONFIG_SHELL=$SHELL as_have_required=yes --fi; } --IFS=$as_save_IFS -- -- -- if test "x$CONFIG_SHELL" != x; then : -- # We cannot yet assume a decent shell, so we have to provide a -- # neutralization value for shells without unset; and this also -- # works around shells that cannot unset nonexistent variables. -- BASH_ENV=/dev/null -- ENV=/dev/null -- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} --fi -- -- if test x$as_have_required = xno; then : -- $as_echo "$0: This script requires a shell more modern than all" -- $as_echo "$0: the shells that I found on your system." -- if test x${ZSH_VERSION+set} = xset ; then -- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" -- $as_echo "$0: be upgraded to zsh 4.3.4 or later." -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var - else -- $as_echo "$0: Please tell [email protected] about your system, --$0: including any error possibly output before this --$0: message. Then install a modern shell, or manually run --$0: the script under such a shell if you do have one." -- fi -- exit 1 --fi --fi --fi --SHELL=${CONFIG_SHELL-/bin/sh} --export SHELL --# Unset more variables known to interfere with behavior of common tools. --CLICOLOR_FORCE= GREP_OPTIONS= --unset CLICOLOR_FORCE GREP_OPTIONS -- --## --------------------- ## --## M4sh Shell Functions. ## --## --------------------- ## --# as_fn_unset VAR --# --------------- --# Portably unset VAR. --as_fn_unset () --{ -- { eval $1=; unset $1;} --} --as_unset=as_fn_unset -- --# as_fn_set_status STATUS --# ----------------------- --# Set $? to STATUS, without forking. --as_fn_set_status () --{ -- return $1 --} # as_fn_set_status -- --# as_fn_exit STATUS --# ----------------- --# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. --as_fn_exit () --{ -- set +e -- as_fn_set_status $1 -- exit $1 --} # as_fn_exit -- --# as_fn_mkdir_p --# ------------- --# Create "$as_dir" as a directory, including parents if necessary. --as_fn_mkdir_p () --{ -- -- case $as_dir in #( -- -*) as_dir=./$as_dir;; -- esac -- test -d "$as_dir" || eval $as_mkdir_p || { -- as_dirs= -- while :; do -- case $as_dir in #( -- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( -- *) as_qdir=$as_dir;; -- esac -- as_dirs="'$as_qdir' $as_dirs" -- as_dir=`$as_dirname -- "$as_dir" || --$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$as_dir" : 'X\(//\)[^/]' \| \ -- X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || --$as_echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -- s//\1/ -- q -- } -- /^X\(\/\/\)[^/].*/{ -- s//\1/ -- q -- } -- /^X\(\/\/\)$/{ -- s//\1/ -- q -- } -- /^X\(\/\).*/{ -- s//\1/ -- q -- } -- s/.*/./; q'` -- test -d "$as_dir" && break -- done -- test -z "$as_dirs" || eval "mkdir $as_dirs" -- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" -- -- --} # as_fn_mkdir_p --# as_fn_append VAR VALUE --# ---------------------- --# Append the text in VALUE to the end of the definition contained in VAR. Take --# advantage of any shell optimizations that allow amortized linear growth over --# repeated appends, instead of the typical quadratic growth present in naive --# implementations. --if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : -- eval 'as_fn_append () -- { -- eval $1+=\$2 -- }' --else -- as_fn_append () -- { -- eval $1=\$$1\$2 -- } --fi # as_fn_append -- --# as_fn_arith ARG... --# ------------------ --# Perform arithmetic evaluation on the ARGs, and store the result in the --# global $as_val. Take advantage of shells that can avoid forks. The arguments --# must be portable across $(()) and expr. --if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : -- eval 'as_fn_arith () -- { -- as_val=$(( $* )) -- }' --else -- as_fn_arith () -- { -- as_val=`expr "$@" || test $? -eq 1` -- } --fi # as_fn_arith -- -- --# as_fn_error STATUS ERROR [LINENO LOG_FD] --# ---------------------------------------- --# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are --# provided, also output the error to LOG_FD, referencing LINENO. Then exit the --# script with STATUS, using 1 if that was 0. --as_fn_error () --{ -- as_status=$1; test $as_status -eq 0 && as_status=1 -- if test "$4"; then -- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -- $as_echo "$as_me: error: $2" >&2 -- as_fn_exit $as_status --} # as_fn_error -+done - -+# Required to use basename. - if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -@@ -386,17 +127,13 @@ else - as_basename=false - fi - --if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -- as_dirname=dirname --else -- as_dirname=false --fi - -+# Name of the executable. - as_me=`$as_basename -- "$0" || - $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || --$as_echo X/"$0" | -+echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q -@@ -411,149 +148,434 @@ $as_echo X/"$0" | - } - s/.*/./; q'` - --# Avoid depending upon Character Ranges. --as_cr_letters='abcdefghijklmnopqrstuvwxyz' --as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' --as_cr_Letters=$as_cr_letters$as_cr_LETTERS --as_cr_digits='0123456789' --as_cr_alnum=$as_cr_Letters$as_cr_digits -+# CDPATH. -+$as_unset CDPATH - - -- as_lineno_1=$LINENO as_lineno_1a=$LINENO -- as_lineno_2=$LINENO as_lineno_2a=$LINENO -- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && -- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { -- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) -- sed -n ' -- p -- /[$]LINENO/= -- ' <$as_myself | -- sed ' -- s/[$]LINENO.*/&-/ -- t lineno -- b -- :lineno -- N -- :loop -- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ -- t loop -- s/-\n.*// -- ' >$as_me.lineno && -- chmod +x "$as_me.lineno" || -- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } -+if test "x$CONFIG_SHELL" = x; then -+ if (eval ":") 2>/dev/null; then -+ as_have_required=yes -+else -+ as_have_required=no -+fi - -- # Don't try to exec as it changes $[0], causing all sort of problems -- # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensitive to this). -- . "./$as_me.lineno" -- # Exit status is that of the last command. -- exit -+ if test $as_have_required = yes && (eval ": -+(as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 - } - --ECHO_C= ECHO_N= ECHO_T= --case `echo -n x` in #((((( ---n*) -- case `echo 'xy\c'` in -- *c*) ECHO_T=' ';; # ECHO_T is single tab character. -- xy) ECHO_C='\c';; -- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null -- ECHO_T=' ';; -- esac;; --*) -- ECHO_N='-n';; --esac -- --rm -f conf$$ conf$$.exe conf$$.file --if test -d conf$$.dir; then -- rm -f conf$$.dir/conf$$.file --else -- rm -f conf$$.dir -- mkdir conf$$.dir 2>/dev/null --fi --if (echo >conf$$.file) 2>/dev/null; then -- if ln -s conf$$.file conf$$ 2>/dev/null; then -- as_ln_s='ln -s' -- # ... but there are two gotchas: -- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -- # In both cases, we have to default to `cp -p'. -- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -- as_ln_s='cp -p' -- elif ln conf$$.file conf$$ 2>/dev/null; then -- as_ln_s=ln -- else -- as_ln_s='cp -p' -- fi -+exitcode=0 -+if as_func_success; then -+ : - else -- as_ln_s='cp -p' -+ exitcode=1 -+ echo as_func_success failed. - fi --rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file --rmdir conf$$.dir 2>/dev/null - --if mkdir -p . 2>/dev/null; then -- as_mkdir_p='mkdir -p "$as_dir"' -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : - else -- test -d ./-p && rmdir ./-p -- as_mkdir_p=false -+ exitcode=1 -+ echo as_func_ret_success failed. - fi - --if test -x / >/dev/null 2>&1; then -- as_test_x='test -x' -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : - else -- if ls -dL / >/dev/null 2>&1; then -- as_ls_L_option=L -- else -- as_ls_L_option= -- fi -- as_test_x=' -- eval sh -c '\'' -- if test -d "$1"; then -- test -d "$1/."; -- else -- case $1 in #( -- -*)set "./$1";; -- esac; -- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( -- ???[sx]*):;;*)false;;esac;fi -- '\'' sh -- ' -+ exitcode=1 -+ echo positional parameters were not saved. - fi --as_executable_p=$as_test_x - --# Sed expression to map a string onto a valid CPP name. --as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+test \$exitcode = 0) || { (exit 1); exit 1; } - --# Sed expression to map a string onto a valid variable name. --as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+( -+ as_lineno_1=\$LINENO -+ as_lineno_2=\$LINENO -+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && -+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -+") 2> /dev/null; then -+ : -+else -+ as_candidate_shells= -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ case $as_dir in -+ /*) -+ for as_base in sh bash ksh sh5; do -+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" -+ done;; -+ esac -+done -+IFS=$as_save_IFS - - --test -n "$DJDIR" || exec 7<&0 </dev/null --exec 6>&1 -+ for as_shell in $as_candidate_shells $SHELL; do -+ # Try only shells that exist, to save several forks. -+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && -+ { ("$as_shell") 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac - --# Name of the host. --# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, --# so uname gets run too. --ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -+fi - --# --# Initializations. --# --ac_default_prefix=/usr/local --ac_clean_files= --ac_config_libobj_dir=. --LIBOBJS= --cross_compiling=no --subdirs= --MFLAGS= --MAKEFLAGS= - --# Identity of this package. --PACKAGE_NAME= -+: -+_ASEOF -+}; then -+ CONFIG_SHELL=$as_shell -+ as_have_required=yes -+ if { "$as_shell" 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+(as_func_return () { -+ (exit $1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = "$1" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test $exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } -+ -+_ASEOF -+}; then -+ break -+fi -+ -+fi -+ -+ done -+ -+ if test "x$CONFIG_SHELL" != x; then -+ for as_var in BASH_ENV ENV -+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ done -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -+fi -+ -+ -+ if test $as_have_required = no; then -+ echo This script requires a shell more modern than all the -+ echo shells that I found on your system. Please install a -+ echo modern shell, or manually run the script under such a -+ echo shell if you do have one. -+ { (exit 1); exit 1; } -+fi -+ -+ -+fi -+ -+fi -+ -+ -+ -+(eval "as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0") || { -+ echo No shell found that supports shell functions. -+ echo Please tell [email protected] about your system, -+ echo including any error possibly output before this -+ echo message -+} -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { -+ -+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -+ # uniformly replaced by the line number. The first 'sed' inserts a -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. -+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | -+ sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno -+ N -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ -+ t loop -+ s/-\n.*// -+ ' >$as_me.lineno && -+ chmod +x "$as_me.lineno" || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -+ { (exit 1); exit 1; }; } -+ -+ # Don't try to exec as it changes $[0], causing all sort of problems -+ # (the dirname of $[0] is not the place where we might find the -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" -+ # Exit status is that of the last command. -+ exit -+} -+ -+ -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac -+ -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi -+echo >conf$$.file -+if ln -s conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+else -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null -+ -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p=: -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false -+fi -+ -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x -+ -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ -+ -+ -+exec 7<&0 </dev/null 6>&1 -+ -+# Name of the host. -+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -+# so uname gets run too. -+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -+ -+# -+# Initializations. -+# -+ac_default_prefix=/usr/local -+ac_clean_files= -+ac_config_libobj_dir=. -+LIBOBJS= -+cross_compiling=no -+subdirs= -+MFLAGS= -+MAKEFLAGS= -+SHELL=${CONFIG_SHELL-/bin/sh} -+ -+# Identity of this package. -+PACKAGE_NAME= - PACKAGE_TARNAME= - PACKAGE_VERSION= - PACKAGE_STRING= - PACKAGE_BUGREPORT= --PACKAGE_URL= - - ac_unique_file="pcap.c" - # Factoring default headers for most tests. -@@ -592,128 +614,102 @@ ac_includes_default="\ - # include <unistd.h> - #endif" - --ac_subst_vars='LTLIBOBJS --INSTALL_DATA --INSTALL_SCRIPT --INSTALL_PROGRAM --CAN_SRC --PCAP_SUPPORT_CAN --CANUSB_SRC --PCAP_SUPPORT_CANUSB --BT_SRC --PCAP_SUPPORT_BT --NETFILTER_SRC --PCAP_SUPPORT_NETFILTER --USB_SRC --PCAP_SUPPORT_USB --MAN_MISC_INFO --MAN_FILE_FORMATS --DYEXT --SSRC --ADDLARCHIVEOBJS --ADDLOBJS --V_RPATH_OPT --V_SONAME_OPT --V_SHLIB_OPT --V_SHLIB_CMD --V_PCAP --V_INCLS --V_FINDALLDEVS --V_DEFS --V_CCOPT --AR --RANLIB --V_YACC --V_LEX --HAVE_LINUX_TPACKET_AUXDATA --LIBOBJS --EGREP --GREP --CPP --OBJEXT --EXEEXT --ac_ct_CC --CPPFLAGS --LDFLAGS --CFLAGS --CC --SHLICC2 --target_os --target_vendor --target_cpu --target --host_os --host_vendor --host_cpu --host --build_os --build_vendor --build_cpu --build --target_alias --host_alias --build_alias --LIBS --ECHO_T --ECHO_N --ECHO_C --DEFS --mandir --localedir --libdir --psdir --pdfdir --dvidir --htmldir --infodir --docdir --oldincludedir --includedir --localstatedir --sharedstatedir --sysconfdir --datadir --datarootdir --libexecdir --sbindir --bindir --program_transform_name --prefix --exec_prefix --PACKAGE_URL --PACKAGE_BUGREPORT --PACKAGE_STRING --PACKAGE_VERSION --PACKAGE_TARNAME --PACKAGE_NAME -+ac_subst_vars='SHELL - PATH_SEPARATOR --SHELL' -+PACKAGE_NAME -+PACKAGE_TARNAME -+PACKAGE_VERSION -+PACKAGE_STRING -+PACKAGE_BUGREPORT -+exec_prefix -+prefix -+program_transform_name -+bindir -+sbindir -+libexecdir -+datarootdir -+datadir -+sysconfdir -+sharedstatedir -+localstatedir -+includedir -+oldincludedir -+docdir -+infodir -+htmldir -+dvidir -+pdfdir -+psdir -+libdir -+localedir -+mandir -+DEFS -+ECHO_C -+ECHO_N -+ECHO_T -+LIBS -+build_alias -+host_alias -+target_alias -+build -+build_cpu -+build_vendor -+build_os -+host -+host_cpu -+host_vendor -+host_os -+target -+target_cpu -+target_vendor -+target_os -+SHLICC2 -+CC -+CFLAGS -+LDFLAGS -+CPPFLAGS -+ac_ct_CC -+EXEEXT -+OBJEXT -+CPP -+GREP -+EGREP -+LIBOBJS -+HAVE_LINUX_TPACKET_AUXDATA -+V_LEX -+V_YACC -+RANLIB -+AR -+V_CCOPT -+V_DEFS -+V_FINDALLDEVS -+V_INCLS -+V_PCAP -+V_SHLIB_CMD -+V_SHLIB_OPT -+V_SONAME_OPT -+V_RPATH_OPT -+ADDLOBJS -+ADDLARCHIVEOBJS -+SSRC -+DYEXT -+MAN_FILE_FORMATS -+MAN_MISC_INFO -+PCAP_SUPPORT_USB -+USB_SRC -+PCAP_SUPPORT_NETFILTER -+NETFILTER_SRC -+PCAP_SUPPORT_BT -+BT_SRC -+PCAP_SUPPORT_CANUSB -+CANUSB_SRC -+PCAP_SUPPORT_CAN -+CAN_SRC -+INSTALL_PROGRAM -+INSTALL_SCRIPT -+INSTALL_DATA -+LTLIBOBJS' - ac_subst_files='' --ac_user_opts=' --enable_option_checking --with_gcc --enable_largefile --enable_protochain --with_sita --with_pcap --with_libnl --enable_ipv6 --enable_optimizer_dbg --enable_yydebug --with_dag --with_dag_includes --with_dag_libraries --with_septel --with_snf --with_snf_includes --with_snf_libraries --with_flex --with_bison --enable_universal --enable_bluetooth --enable_canusb --enable_can --' - ac_precious_vars='build_alias - host_alias - target_alias -@@ -728,8 +724,6 @@ CPP' - # Initialize some variables set by options. - ac_init_help= - ac_init_version=false --ac_unrecognized_opts= --ac_unrecognized_sep= - # The variables have the same names as the options, with - # dashes changed to underlines. - cache_file=/dev/null -@@ -785,9 +779,8 @@ do - fi - - case $ac_option in -- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -- *=) ac_optarg= ;; -- *) ac_optarg=yes ;; -+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -+ *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. -@@ -829,20 +822,13 @@ do - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) -- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` -+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -- as_fn_error $? "invalid feature name: $ac_useropt" -- ac_useropt_orig=$ac_useropt -- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -- case $ac_user_opts in -- *" --"enable_$ac_useropt" --"*) ;; -- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" -- ac_unrecognized_sep=', ';; -- esac -- eval enable_$ac_useropt=no ;; -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; -@@ -855,20 +841,13 @@ do - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) -- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` -+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -- as_fn_error $? "invalid feature name: $ac_useropt" -- ac_useropt_orig=$ac_useropt -- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -- case $ac_user_opts in -- *" --"enable_$ac_useropt" --"*) ;; -- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" -- ac_unrecognized_sep=', ';; -- esac -- eval enable_$ac_useropt=\$ac_optarg ;; -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -@@ -1059,36 +1038,22 @@ do - ac_init_version=: ;; - - -with-* | --with-*) -- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` -+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -- as_fn_error $? "invalid package name: $ac_useropt" -- ac_useropt_orig=$ac_useropt -- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -- case $ac_user_opts in -- *" --"with_$ac_useropt" --"*) ;; -- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" -- ac_unrecognized_sep=', ';; -- esac -- eval with_$ac_useropt=\$ac_optarg ;; -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=\$ac_optarg ;; - - -without-* | --without-*) -- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` -+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -- as_fn_error $? "invalid package name: $ac_useropt" -- ac_useropt_orig=$ac_useropt -- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -- case $ac_user_opts in -- *" --"with_$ac_useropt" --"*) ;; -- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" -- ac_unrecognized_sep=', ';; -- esac -- eval with_$ac_useropt=no ;; -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=no ;; - - --x) - # Obsolete; use --with-x. -@@ -1108,25 +1073,25 @@ do - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - -- -*) as_fn_error $? "unrecognized option: \`$ac_option' --Try \`$0 --help' for more information" -+ -*) { echo "$as_me: error: unrecognized option: $ac_option -+Try \`$0 --help' for more information." >&2 -+ { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. -- case $ac_envvar in #( -- '' | [0-9]* | *[!_$as_cr_alnum]* ) -- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; -- esac -+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 -+ { (exit 1); exit 1; }; } - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. -- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 -+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && -- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 -+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - -@@ -1135,36 +1100,23 @@ done - - if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` -- as_fn_error $? "missing argument to $ac_option" -+ { echo "$as_me: error: missing argument to $ac_option" >&2 -+ { (exit 1); exit 1; }; } - fi - --if test -n "$ac_unrecognized_opts"; then -- case $enable_option_checking in -- no) ;; -- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; -- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; -- esac --fi -- --# Check all directory arguments for consistency. -+# Be sure to have absolute directory names. - for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir - do - eval ac_val=\$$ac_var -- # Remove trailing slashes. -- case $ac_val in -- */ ) -- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` -- eval $ac_var=\$ac_val;; -- esac -- # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac -- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -+ { (exit 1); exit 1; }; } - done - - # There might be people who depend on the old broken behavior: `$host' -@@ -1178,8 +1130,8 @@ target=$target_alias - if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe -- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. -- If a cross compiler is detected then cross compile mode will be used" >&2 -+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. -+ If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -@@ -1194,21 +1146,23 @@ test "$silent" = yes && exec 6>/dev/null - ac_pwd=`pwd` && test -n "$ac_pwd" && - ac_ls_di=`ls -di .` && - ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || -- as_fn_error $? "working directory cannot be determined" -+ { echo "$as_me: error: Working directory cannot be determined" >&2 -+ { (exit 1); exit 1; }; } - test "X$ac_ls_di" = "X$ac_pwd_ls_di" || -- as_fn_error $? "pwd does not report name of working directory" -+ { echo "$as_me: error: pwd does not report name of working directory" >&2 -+ { (exit 1); exit 1; }; } - - - # Find the source files, if location was not specified. - if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. -- ac_confdir=`$as_dirname -- "$as_myself" || --$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$as_myself" : 'X\(//\)[^/]' \| \ -- X"$as_myself" : 'X\(//\)$' \| \ -- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || --$as_echo X"$as_myself" | -+ ac_confdir=`$as_dirname -- "$0" || -+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$0" : 'X\(//\)[^/]' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q -@@ -1235,11 +1189,13 @@ else - fi - if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." -- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -+ { (exit 1); exit 1; }; } - fi - ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" - ac_abs_confdir=`( -- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" -+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 -+ { (exit 1); exit 1; }; } - pwd)` - # When building in place, set srcdir=. - if test "$ac_abs_confdir" = "$ac_pwd"; then -@@ -1279,7 +1235,7 @@ Configuration: - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit -- -q, --quiet, --silent do not print \`checking ...' messages -+ -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files -@@ -1287,9 +1243,9 @@ Configuration: - - Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX -- [$ac_default_prefix] -+ [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -- [PREFIX] -+ [PREFIX] - - By default, \`make install' will install all the files in - \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -@@ -1299,25 +1255,25 @@ for instance \`--prefix=\$HOME'. - For better control, use the options below. - - Fine tuning of the installation directories: -- --bindir=DIR user executables [EPREFIX/bin] -- --sbindir=DIR system admin executables [EPREFIX/sbin] -- --libexecdir=DIR program executables [EPREFIX/libexec] -- --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -- --localstatedir=DIR modifiable single-machine data [PREFIX/var] -- --libdir=DIR object code libraries [EPREFIX/lib] -- --includedir=DIR C header files [PREFIX/include] -- --oldincludedir=DIR C header files for non-gcc [/usr/include] -- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] -- --datadir=DIR read-only architecture-independent data [DATAROOTDIR] -- --infodir=DIR info documentation [DATAROOTDIR/info] -- --localedir=DIR locale-dependent data [DATAROOTDIR/locale] -- --mandir=DIR man documentation [DATAROOTDIR/man] -- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] -- --htmldir=DIR html documentation [DOCDIR] -- --dvidir=DIR dvi documentation [DOCDIR] -- --pdfdir=DIR pdf documentation [DOCDIR] -- --psdir=DIR ps documentation [DOCDIR] -+ --bindir=DIR user executables [EPREFIX/bin] -+ --sbindir=DIR system admin executables [EPREFIX/sbin] -+ --libexecdir=DIR program executables [EPREFIX/libexec] -+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -+ --localstatedir=DIR modifiable single-machine data [PREFIX/var] -+ --libdir=DIR object code libraries [EPREFIX/lib] -+ --includedir=DIR C header files [PREFIX/include] -+ --oldincludedir=DIR C header files for non-gcc [/usr/include] -+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] -+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] -+ --infodir=DIR info documentation [DATAROOTDIR/info] -+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] -+ --mandir=DIR man documentation [DATAROOTDIR/man] -+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] -+ --htmldir=DIR html documentation [DOCDIR] -+ --dvidir=DIR dvi documentation [DOCDIR] -+ --pdfdir=DIR pdf documentation [DOCDIR] -+ --psdir=DIR ps documentation [DOCDIR] - _ACEOF - - cat <<\_ACEOF -@@ -1334,7 +1290,6 @@ if test -n "$ac_init_help"; then - cat <<\_ACEOF - - Optional Features: -- --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-largefile omit support for large files -@@ -1344,11 +1299,12 @@ Optional Features: - --enable-optimizer-dbg build optimizer debugging code - --enable-yydebug build parser debugging code - --disable-universal don't build universal on OS X -+ --enable-shared build shared libraries [default=yes, if support -+ available] - --enable-bluetooth enable Bluetooth support [default=yes, if support - available] - --enable-canusb enable canusb support [default=yes, if support - available] -- - --enable-can enable CAN support [default=yes, if support - available] - -@@ -1381,14 +1337,13 @@ Some influential environment variables: - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> - LIBS libraries to pass to the linker, e.g. -l<library> -- CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if -+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if - you have headers in a nonstandard directory <include dir> - CPP C preprocessor - - Use these variables to override the choices made by `configure' or to help - it to find libraries and programs with nonstandard names/locations. - --Report bugs to the package provider. - _ACEOF - ac_status=$? - fi -@@ -1396,17 +1351,15 @@ fi - if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -- test -d "$ac_dir" || -- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || -- continue -+ test -d "$ac_dir" || continue - ac_builddir=. - - case "$ac_dir" in - .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) -- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A ".." for each directory in $ac_dir_suffix. -- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -@@ -1442,7 +1395,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else -- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -@@ -1452,519 +1405,68 @@ test -n "$ac_init_help" && exit $ac_status - if $ac_init_version; then - cat <<\_ACEOF - configure --generated by GNU Autoconf 2.67 -+generated by GNU Autoconf 2.61 - --Copyright (C) 2010 Free Software Foundation, Inc. -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. - This configure script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it. - _ACEOF - exit - fi -+cat >config.log <<_ACEOF -+This file contains any messages produced by compilers while -+running configure, to aid debugging if configure makes a mistake. - --## ------------------------ ## --## Autoconf initialization. ## --## ------------------------ ## -- --# ac_fn_c_try_compile LINENO --# -------------------------- --# Try to compile conftest.$ac_ext, and return whether this succeeded. --ac_fn_c_try_compile () --{ -- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- rm -f conftest.$ac_objext -- if { { ac_try="$ac_compile" --case "(($ac_try" in -- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -- *) ac_try_echo=$ac_try;; --esac --eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" --$as_echo "$ac_try_echo"; } >&5 -- (eval "$ac_compile") 2>conftest.err -- ac_status=$? -- if test -s conftest.err; then -- grep -v '^ *+' conftest.err >conftest.er1 -- cat conftest.er1 >&5 -- mv -f conftest.er1 conftest.err -- fi -- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -- test $ac_status = 0; } && { -- test -z "$ac_c_werror_flag" || -- test ! -s conftest.err -- } && test -s conftest.$ac_objext; then : -- ac_retval=0 --else -- $as_echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- -- ac_retval=1 --fi -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- as_fn_set_status $ac_retval -+It was created by $as_me, which was -+generated by GNU Autoconf 2.61. Invocation command line was - --} # ac_fn_c_try_compile -+ $ $0 $@ - --# ac_fn_c_try_cpp LINENO --# ---------------------- --# Try to preprocess conftest.$ac_ext, and return whether this succeeded. --ac_fn_c_try_cpp () -+_ACEOF -+exec 5>>config.log - { -- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- if { { ac_try="$ac_cpp conftest.$ac_ext" --case "(($ac_try" in -- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -- *) ac_try_echo=$ac_try;; --esac --eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" --$as_echo "$ac_try_echo"; } >&5 -- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err -- ac_status=$? -- if test -s conftest.err; then -- grep -v '^ *+' conftest.err >conftest.er1 -- cat conftest.er1 >&5 -- mv -f conftest.er1 conftest.err -- fi -- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -- test $ac_status = 0; } > conftest.i && { -- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -- test ! -s conftest.err -- }; then : -- ac_retval=0 --else -- $as_echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+cat <<_ASUNAME -+## --------- ## -+## Platform. ## -+## --------- ## - -- ac_retval=1 --fi -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- as_fn_set_status $ac_retval -+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -+uname -m = `(uname -m) 2>/dev/null || echo unknown` -+uname -r = `(uname -r) 2>/dev/null || echo unknown` -+uname -s = `(uname -s) 2>/dev/null || echo unknown` -+uname -v = `(uname -v) 2>/dev/null || echo unknown` - --} # ac_fn_c_try_cpp -+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - --# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES --# ------------------------------------------------------- --# Tests whether HEADER exists, giving a warning if it cannot be compiled using --# the include files in INCLUDES and setting the cache variable VAR --# accordingly. --ac_fn_c_check_header_mongrel () --{ -- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- if eval "test \"\${$3+set}\"" = set; then : -- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 --$as_echo_n "checking for $2... " >&6; } --if eval "test \"\${$3+set}\"" = set; then : -- $as_echo_n "(cached) " >&6 --fi --eval ac_res=\$$3 -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 --$as_echo "$ac_res" >&6; } --else -- # Is the header compilable? --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 --$as_echo_n "checking $2 usability... " >&6; } --cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --$4 --#include <$2> --_ACEOF --if ac_fn_c_try_compile "$LINENO"; then : -- ac_header_compiler=yes --else -- ac_header_compiler=no --fi --rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 --$as_echo "$ac_header_compiler" >&6; } -+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - --# Is the header present? --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 --$as_echo_n "checking $2 presence... " >&6; } --cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --#include <$2> --_ACEOF --if ac_fn_c_try_cpp "$LINENO"; then : -- ac_header_preproc=yes --else -- ac_header_preproc=no --fi --rm -f conftest.err conftest.i conftest.$ac_ext --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 --$as_echo "$ac_header_preproc" >&6; } -+_ASUNAME - --# So? What about this header? --case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( -- yes:no: ) -- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 --$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} -- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 --$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -- ;; -- no:yes:* ) -- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 --$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} -- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 --$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} -- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 --$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} -- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 --$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} -- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 --$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -- ;; --esac -- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 --$as_echo_n "checking for $2... " >&6; } --if eval "test \"\${$3+set}\"" = set; then : -- $as_echo_n "(cached) " >&6 --else -- eval "$3=\$ac_header_compiler" --fi --eval ac_res=\$$3 -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 --$as_echo "$ac_res" >&6; } --fi -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ echo "PATH: $as_dir" -+done -+IFS=$as_save_IFS - --} # ac_fn_c_check_header_mongrel -+} >&5 - --# ac_fn_c_try_run LINENO --# ---------------------- --# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes --# that executables *can* be run. --ac_fn_c_try_run () --{ -- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- if { { ac_try="$ac_link" --case "(($ac_try" in -- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -- *) ac_try_echo=$ac_try;; --esac --eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" --$as_echo "$ac_try_echo"; } >&5 -- (eval "$ac_link") 2>&5 -- ac_status=$? -- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -- test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' -- { { case "(($ac_try" in -- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -- *) ac_try_echo=$ac_try;; --esac --eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" --$as_echo "$ac_try_echo"; } >&5 -- (eval "$ac_try") 2>&5 -- ac_status=$? -- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -- test $ac_status = 0; }; }; then : -- ac_retval=0 --else -- $as_echo "$as_me: program exited with status $ac_status" >&5 -- $as_echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+cat >&5 <<_ACEOF - -- ac_retval=$ac_status --fi -- rm -rf conftest.dSYM conftest_ipa8_conftest.oo -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- as_fn_set_status $ac_retval - --} # ac_fn_c_try_run -- --# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES --# ------------------------------------------------------- --# Tests whether HEADER exists and can be compiled using the include files in --# INCLUDES, setting the cache variable VAR accordingly. --ac_fn_c_check_header_compile () --{ -- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 --$as_echo_n "checking for $2... " >&6; } --if eval "test \"\${$3+set}\"" = set; then : -- $as_echo_n "(cached) " >&6 --else -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --$4 --#include <$2> --_ACEOF --if ac_fn_c_try_compile "$LINENO"; then : -- eval "$3=yes" --else -- eval "$3=no" --fi --rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext --fi --eval ac_res=\$$3 -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 --$as_echo "$ac_res" >&6; } -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- --} # ac_fn_c_check_header_compile -- --# ac_fn_c_check_type LINENO TYPE VAR INCLUDES --# ------------------------------------------- --# Tests whether TYPE exists after having included INCLUDES, setting cache --# variable VAR accordingly. --ac_fn_c_check_type () --{ -- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 --$as_echo_n "checking for $2... " >&6; } --if eval "test \"\${$3+set}\"" = set; then : -- $as_echo_n "(cached) " >&6 --else -- eval "$3=no" -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --$4 --int --main () --{ --if (sizeof ($2)) -- return 0; -- ; -- return 0; --} --_ACEOF --if ac_fn_c_try_compile "$LINENO"; then : -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --$4 --int --main () --{ --if (sizeof (($2))) -- return 0; -- ; -- return 0; --} --_ACEOF --if ac_fn_c_try_compile "$LINENO"; then : -- --else -- eval "$3=yes" --fi --rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext --fi --rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext --fi --eval ac_res=\$$3 -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 --$as_echo "$ac_res" >&6; } -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- --} # ac_fn_c_check_type -- --# ac_fn_c_try_link LINENO --# ----------------------- --# Try to link conftest.$ac_ext, and return whether this succeeded. --ac_fn_c_try_link () --{ -- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- rm -f conftest.$ac_objext conftest$ac_exeext -- if { { ac_try="$ac_link" --case "(($ac_try" in -- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -- *) ac_try_echo=$ac_try;; --esac --eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" --$as_echo "$ac_try_echo"; } >&5 -- (eval "$ac_link") 2>conftest.err -- ac_status=$? -- if test -s conftest.err; then -- grep -v '^ *+' conftest.err >conftest.er1 -- cat conftest.er1 >&5 -- mv -f conftest.er1 conftest.err -- fi -- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -- test $ac_status = 0; } && { -- test -z "$ac_c_werror_flag" || -- test ! -s conftest.err -- } && test -s conftest$ac_exeext && { -- test "$cross_compiling" = yes || -- $as_test_x conftest$ac_exeext -- }; then : -- ac_retval=0 --else -- $as_echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- -- ac_retval=1 --fi -- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information -- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would -- # interfere with the next link command; also delete a directory that is -- # left behind by Apple's compiler. We do this before executing the actions. -- rm -rf conftest.dSYM conftest_ipa8_conftest.oo -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- as_fn_set_status $ac_retval -- --} # ac_fn_c_try_link -- --# ac_fn_c_check_func LINENO FUNC VAR --# ---------------------------------- --# Tests whether FUNC exists, setting the cache variable VAR accordingly --ac_fn_c_check_func () --{ -- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 --$as_echo_n "checking for $2... " >&6; } --if eval "test \"\${$3+set}\"" = set; then : -- $as_echo_n "(cached) " >&6 --else -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --/* Define $2 to an innocuous variant, in case <limits.h> declares $2. -- For example, HP-UX 11i <limits.h> declares gettimeofday. */ --#define $2 innocuous_$2 -- --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char $2 (); below. -- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -- <limits.h> exists even on freestanding compilers. */ -- --#ifdef __STDC__ --# include <limits.h> --#else --# include <assert.h> --#endif -- --#undef $2 -- --/* Override any GCC internal prototype to avoid an error. -- Use char because int might match the return type of a GCC -- builtin and then its argument prototype would still apply. */ --#ifdef __cplusplus --extern "C" --#endif --char $2 (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined __stub_$2 || defined __stub___$2 --choke me --#endif -- --int --main () --{ --return $2 (); -- ; -- return 0; --} --_ACEOF --if ac_fn_c_try_link "$LINENO"; then : -- eval "$3=yes" --else -- eval "$3=no" --fi --rm -f core conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --eval ac_res=\$$3 -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 --$as_echo "$ac_res" >&6; } -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- --} # ac_fn_c_check_func -- --# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES --# --------------------------------------------- --# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR --# accordingly. --ac_fn_c_check_decl () --{ -- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -- as_decl_name=`echo $2|sed 's/ *(.*//'` -- as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` -- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 --$as_echo_n "checking whether $as_decl_name is declared... " >&6; } --if eval "test \"\${$3+set}\"" = set; then : -- $as_echo_n "(cached) " >&6 --else -- cat confdefs.h - <<_ACEOF >conftest.$ac_ext --/* end confdefs.h. */ --$4 --int --main () --{ --#ifndef $as_decl_name --#ifdef __cplusplus -- (void) $as_decl_use; --#else -- (void) $as_decl_name; --#endif --#endif -- -- ; -- return 0; --} --_ACEOF --if ac_fn_c_try_compile "$LINENO"; then : -- eval "$3=yes" --else -- eval "$3=no" --fi --rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext --fi --eval ac_res=\$$3 -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 --$as_echo "$ac_res" >&6; } -- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -- --} # ac_fn_c_check_decl --cat >config.log <<_ACEOF --This file contains any messages produced by compilers while --running configure, to aid debugging if configure makes a mistake. -- --It was created by $as_me, which was --generated by GNU Autoconf 2.67. Invocation command line was -- -- $ $0 $@ -- --_ACEOF --exec 5>>config.log --{ --cat <<_ASUNAME --## --------- ## --## Platform. ## --## --------- ## -- --hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` --uname -m = `(uname -m) 2>/dev/null || echo unknown` --uname -r = `(uname -r) 2>/dev/null || echo unknown` --uname -s = `(uname -s) 2>/dev/null || echo unknown` --uname -v = `(uname -v) 2>/dev/null || echo unknown` -- --/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` --/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` -- --/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` --/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` --/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` --/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` --/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` --/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` --/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -- --_ASUNAME -- --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- $as_echo "PATH: $as_dir" -- done --IFS=$as_save_IFS -- --} >&5 -- --cat >&5 <<_ACEOF -- -- --## ----------- ## --## Core tests. ## --## ----------- ## -+## ----------- ## -+## Core tests. ## -+## ----------- ## - - _ACEOF - -@@ -1988,12 +1490,12 @@ do - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) -- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in -- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; -+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) -- as_fn_append ac_configure_args1 " '$ac_arg'" -+ ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else -@@ -2009,13 +1511,13 @@ do - -* ) ac_must_keep_next=true ;; - esac - fi -- as_fn_append ac_configure_args " '$ac_arg'" -+ ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - esac - done - done --{ ac_configure_args0=; unset ac_configure_args0;} --{ ac_configure_args1=; unset ac_configure_args1;} -+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - - # When interrupted or exit'd, cleanup temporary files, and complete - # config.log. We remove comments because anyway the quotes in there -@@ -2027,9 +1529,11 @@ trap 'exit_status=$? - { - echo - -- $as_echo "## ---------------- ## -+ cat <<\_ASBOX -+## ---------------- ## - ## Cache variables. ## --## ---------------- ##" -+## ---------------- ## -+_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, - ( -@@ -2038,13 +1542,12 @@ trap 'exit_status=$? - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( -- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 --$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( -- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( -- *) { eval $ac_var=; unset $ac_var;} ;; -+ *) $as_unset $ac_var ;; - esac ;; - esac - done -@@ -2063,136 +1566,128 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - ) - echo - -- $as_echo "## ----------------- ## -+ cat <<\_ASBOX -+## ----------------- ## - ## Output variables. ## --## ----------------- ##" -+## ----------------- ## -+_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in -- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac -- $as_echo "$ac_var='\''$ac_val'\''" -+ echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then -- $as_echo "## ------------------- ## -+ cat <<\_ASBOX -+## ------------------- ## - ## File substitutions. ## --## ------------------- ##" -+## ------------------- ## -+_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in -- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac -- $as_echo "$ac_var='\''$ac_val'\''" -+ echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then -- $as_echo "## ----------- ## -+ cat <<\_ASBOX -+## ----------- ## - ## confdefs.h. ## --## ----------- ##" -+## ----------- ## -+_ASBOX - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && -- $as_echo "$as_me: caught signal $ac_signal" -- $as_echo "$as_me: exit $exit_status" -+ echo "$as_me: caught signal $ac_signal" -+ echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 - for ac_signal in 1 2 13 15; do -- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal - done - ac_signal=0 - - # confdefs.h avoids OS command line length limits that DEFS can exceed. - rm -f -r conftest* confdefs.h - --$as_echo "/* confdefs.h */" > confdefs.h -- - # Predefined preprocessor variables. - - cat >>confdefs.h <<_ACEOF - #define PACKAGE_NAME "$PACKAGE_NAME" - _ACEOF - -+ - cat >>confdefs.h <<_ACEOF - #define PACKAGE_TARNAME "$PACKAGE_TARNAME" - _ACEOF - -+ - cat >>confdefs.h <<_ACEOF - #define PACKAGE_VERSION "$PACKAGE_VERSION" - _ACEOF - -+ - cat >>confdefs.h <<_ACEOF - #define PACKAGE_STRING "$PACKAGE_STRING" - _ACEOF - --cat >>confdefs.h <<_ACEOF --#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" --_ACEOF - - cat >>confdefs.h <<_ACEOF --#define PACKAGE_URL "$PACKAGE_URL" -+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" - _ACEOF - - - # Let the site file select an alternate cache file if it wants to. --# Prefer an explicitly selected file to automatically selected ones. --ac_site_file1=NONE --ac_site_file2=NONE -+# Prefer explicitly selected file to automatically selected ones. - if test -n "$CONFIG_SITE"; then -- # We do not want a PATH search for config.site. -- case $CONFIG_SITE in #(( -- -*) ac_site_file1=./$CONFIG_SITE;; -- */*) ac_site_file1=$CONFIG_SITE;; -- *) ac_site_file1=./$CONFIG_SITE;; -- esac -+ set x "$CONFIG_SITE" - elif test "x$prefix" != xNONE; then -- ac_site_file1=$prefix/share/config.site -- ac_site_file2=$prefix/etc/config.site -+ set x "$prefix/share/config.site" "$prefix/etc/config.site" - else -- ac_site_file1=$ac_default_prefix/share/config.site -- ac_site_file2=$ac_default_prefix/etc/config.site -+ set x "$ac_default_prefix/share/config.site" \ -+ "$ac_default_prefix/etc/config.site" - fi --for ac_site_file in "$ac_site_file1" "$ac_site_file2" -+shift -+for ac_site_file - do -- test "x$ac_site_file" = xNONE && continue -- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 --$as_echo "$as_me: loading site script $ac_site_file" >&6;} -+ if test -r "$ac_site_file"; then -+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -+echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 -- . "$ac_site_file" \ -- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 --$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} --as_fn_error $? "failed to load site script $ac_site_file --See \`config.log' for more details" "$LINENO" 5 ; } -+ . "$ac_site_file" - fi - done - - if test -r "$cache_file"; then -- # Some versions of bash will fail to source /dev/null (special files -- # actually), so we avoid doing that. DJGPP emulates it as a regular file. -- if test /dev/null != "$cache_file" && test -f "$cache_file"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 --$as_echo "$as_me: loading cache $cache_file" >&6;} -+ # Some versions of bash will fail to source /dev/null (special -+ # files actually), so we avoid doing that. -+ if test -f "$cache_file"; then -+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -+echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi - else -- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 --$as_echo "$as_me: creating cache $cache_file" >&6;} -+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -+echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file - fi - -@@ -2206,56 +1701,60 @@ for ac_var in $ac_precious_vars; do - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) -- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 --$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} -+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) -- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 --$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} -+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then -- # differences in whitespace do not lead to failure. -- ac_old_val_w=`echo x $ac_old_val` -- ac_new_val_w=`echo x $ac_new_val` -- if test "$ac_old_val_w" != "$ac_new_val_w"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 --$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -- ac_cache_corrupted=: -- else -- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 --$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} -- eval $ac_var=\$ac_old_val -- fi -- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 --$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} -- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 --$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} -+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -+echo "$as_me: former value: $ac_old_val" >&2;} -+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -+echo "$as_me: current value: $ac_new_val" >&2;} -+ ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in -- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. -- *) as_fn_append ac_configure_args " '$ac_arg'" ;; -+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi - done - if $ac_cache_corrupted; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 --$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 --$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} -- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -+echo "$as_me: error: changes in the environment can compromise the build" >&2;} -+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} -+ { (exit 1); exit 1; }; } - fi --## -------------------- ## --## Main body of script. ## --## -------------------- ## -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ - - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' -@@ -2282,7 +1781,9 @@ for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - fi - done - if test -z "$ac_aux_dir"; then -- as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 -+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} -+ { (exit 1); exit 1; }; } - fi - - # These three variables are undocumented and unsupported, -@@ -2296,27 +1797,35 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - # Make sure we can run config.sub. - $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || -- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 -+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} -+ { (exit 1); exit 1; }; } - --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 --$as_echo_n "checking build system type... " >&6; } --if test "${ac_cv_build+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking build system type" >&5 -+echo $ECHO_N "checking build system type... $ECHO_C" >&6; } -+if test "${ac_cv_build+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - ac_build_alias=$build_alias - test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` - test "x$ac_build_alias" = x && -- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -+echo "$as_me: error: cannot guess build type; you must specify one" >&2;} -+ { (exit 1); exit 1; }; } - ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || -- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} -+ { (exit 1); exit 1; }; } - - fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 --$as_echo "$ac_cv_build" >&6; } -+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -+echo "${ECHO_T}$ac_cv_build" >&6; } - case $ac_cv_build in - *-*-*) ;; --*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -+echo "$as_me: error: invalid value of canonical build" >&2;} -+ { (exit 1); exit 1; }; };; - esac - build=$ac_cv_build - ac_save_IFS=$IFS; IFS='-' -@@ -2332,24 +1841,28 @@ IFS=$ac_save_IFS - case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 --$as_echo_n "checking host system type... " >&6; } --if test "${ac_cv_host+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking host system type" >&5 -+echo $ECHO_N "checking host system type... $ECHO_C" >&6; } -+if test "${ac_cv_host+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build - else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || -- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} -+ { (exit 1); exit 1; }; } - fi - - fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 --$as_echo "$ac_cv_host" >&6; } -+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -+echo "${ECHO_T}$ac_cv_host" >&6; } - case $ac_cv_host in - *-*-*) ;; --*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -+echo "$as_me: error: invalid value of canonical host" >&2;} -+ { (exit 1); exit 1; }; };; - esac - host=$ac_cv_host - ac_save_IFS=$IFS; IFS='-' -@@ -2365,24 +1878,28 @@ IFS=$ac_save_IFS - case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5 --$as_echo_n "checking target system type... " >&6; } --if test "${ac_cv_target+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking target system type" >&5 -+echo $ECHO_N "checking target system type... $ECHO_C" >&6; } -+if test "${ac_cv_target+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test "x$target_alias" = x; then - ac_cv_target=$ac_cv_host - else - ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || -- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} -+ { (exit 1); exit 1; }; } - fi - - fi --{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5 --$as_echo "$ac_cv_target" >&6; } -+{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 -+echo "${ECHO_T}$ac_cv_target" >&6; } - case $ac_cv_target in - *-*-*) ;; --*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5 ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 -+echo "$as_me: error: invalid value of canonical target" >&2;} -+ { (exit 1); exit 1; }; };; - esac - target=$ac_cv_target - ac_save_IFS=$IFS; IFS='-' -@@ -2411,9 +1928,8 @@ test -n "$target_alias" && - - - -- - # Check whether --with-gcc was given. --if test "${with_gcc+set}" = set; then : -+if test "${with_gcc+set}" = set; then - withval=$with_gcc; - fi - -@@ -2431,10 +1947,10 @@ fi - bsdi*) - # Extract the first word of "shlicc2", so it can be a program name with args. - set dummy shlicc2; ac_word=$2 --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 --$as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_SHLICC2+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_SHLICC2+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$SHLICC2"; then - ac_cv_prog_SHLICC2="$SHLICC2" # Let the user override the test. -@@ -2444,14 +1960,14 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -+ for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_SHLICC2="yes" -- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done -- done -+done - IFS=$as_save_IFS - - test -z "$ac_cv_prog_SHLICC2" && ac_cv_prog_SHLICC2="no" -@@ -2459,11 +1975,11 @@ fi - fi - SHLICC2=$ac_cv_prog_SHLICC2 - if test -n "$SHLICC2"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SHLICC2" >&5 --$as_echo "$SHLICC2" >&6; } -+ { echo "$as_me:$LINENO: result: $SHLICC2" >&5 -+echo "${ECHO_T}$SHLICC2" >&6; } - else -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 --$as_echo "no" >&6; } -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -@@ -2487,10 +2003,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. - set dummy ${ac_tool_prefix}gcc; ac_word=$2 --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 --$as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -2500,25 +2016,25 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -+ for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" -- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done -- done -+done - IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 --$as_echo "$CC" >&6; } -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 --$as_echo "no" >&6; } -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -@@ -2527,10 +2043,10 @@ if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. - set dummy gcc; ac_word=$2 --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 --$as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -@@ -2540,25 +2056,25 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -+ for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" -- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done -- done -+done - IFS=$as_save_IFS - - fi - fi - ac_ct_CC=$ac_cv_prog_ac_ct_CC - if test -n "$ac_ct_CC"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 --$as_echo "$ac_ct_CC" >&6; } -+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+echo "${ECHO_T}$ac_ct_CC" >&6; } - else -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 --$as_echo "no" >&6; } -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - if test "x$ac_ct_CC" = x; then -@@ -2566,8 +2082,12 @@ fi - else - case $cross_compiling:$ac_tool_warned in - yes:) --{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 --$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to [email protected]." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to [email protected]." >&2;} - ac_tool_warned=yes ;; - esac - CC=$ac_ct_CC -@@ -2580,10 +2100,10 @@ if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. - set dummy ${ac_tool_prefix}cc; ac_word=$2 --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 --$as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -2593,25 +2113,25 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -+ for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" -- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done -- done -+done - IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 --$as_echo "$CC" >&6; } -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 --$as_echo "no" >&6; } -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -@@ -2620,10 +2140,10 @@ fi - if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. - set dummy cc; ac_word=$2 --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 --$as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -2634,18 +2154,18 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -+ for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" -- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done -- done -+done - IFS=$as_save_IFS - - if test $ac_prog_rejected = yes; then -@@ -2664,11 +2184,11 @@ fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 --$as_echo "$CC" >&6; } -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 --$as_echo "no" >&6; } -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -@@ -2679,10 +2199,10 @@ if test -z "$CC"; then - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 --$as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_CC+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -2692,25 +2212,25 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -+ for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" -- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done -- done -+done - IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 --$as_echo "$CC" >&6; } -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 --$as_echo "no" >&6; } -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -@@ -2723,10 +2243,10 @@ if test -z "$CC"; then - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 --$as_echo_n "checking for $ac_word... " >&6; } --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : -- $as_echo_n "(cached) " >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
Lines of this file are not shown. View the raw message.
meta/recipes-connectivity/libpcap/libpcap-1.3.0/0001-The-leading-comma-looked-weird-remove-it.patch +13 -10
Lines of this file are not shown. View the raw message.
meta/recipes-connectivity/libpcap/libpcap-1.3.0/0001-canusb-needs-lpthread.patch +3 -14
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.7.10.4
Part of the diff is not shown here. View the raw message.