ip: ipv6: add tokenized interface identifier support
Subsystems (2)
PATCH 1/1 ip: ipv6: add tokenized interface identifier support
This patch adds support for tokenized IIDs, that enable administrators to assign well-known host-part addresses to nodes whilst still obtaining global network prefix from Router Advertisements. This is the iproute2 part for the kernel patch f53adae4eae5 (``net: ipv6: add tokenized interface identifier support'').
Example commands with iproute2:
Setting a device token:
# ip token set ::1a:2b:3c:4d/64 dev eth1
Getting a device token:
# ip token get dev eth1 token ::1a:2b:3c:4d dev eth1
Listing all tokens:
# ip token list (or: ip token) token :: dev eth0 token ::1a:2b:3c:4d dev eth1
---
For iproute2 3.10.x and onwards. v1->v2:
- Rebased original submission on latest iproute2 tree
- No code change since then, except only added an error message if there's no support for ipv6 token, that's all.
include/linux/if_link.h | 1 + ip/Makefile | 2 +- ip/ip.c | 3 +- ip/ip_common.h | 1 + ip/iptoken.c | 210 ++++++++++++++++++++++++++++++++++++++++++++++++ man/man8/Makefile | 2 +- man/man8/ip-token.8 | 66 +++++++++++++++ 7 files changed, 282 insertions(+), 3 deletions(-) create mode 100644 ip/iptoken.c create mode 100644 man/man8/ip-token.8
include/linux/if_link.h +1 -0
@@ -199,6 +199,7 @@ enum {IFLA_INET6_MCAST ,/* MC things. What of them? */ IFLA_INET6_CACHEINFO ,/* time values and max reasm size */ IFLA_INET6_ICMP6STATS ,/* statistics (icmpv6) */ +IFLA_INET6_TOKEN ,/* device token */ __IFLA_INET6_MAX };
ip/Makefile +1 -1
@@ -1,6 +1,6 @@ IPOBJ=ip.o ipaddress.o ipaddrlabel.o iproute.o iprule.o ipnetns.o \ rtm_map.o iptunnel.o ip6tunnel.o tunnel.o ipneigh.o ipntable.o iplink.o \ - ipmaddr.o ipmonitor.o ipmroute.o ipprefix.o iptuntap.o \ + ipmaddr.o ipmonitor.o ipmroute.o ipprefix.o iptuntap.o iptoken.o \ ipxfrm.o xfrm_state.o xfrm_policy.o xfrm_monitor.o \ iplink_vlan.o link_veth.o link_gre.o iplink_can.o \ iplink_macvlan.o iplink_macvtap.o ipl2tp.o link_vti.o \
ip/ip.c +2 -1
@@ -45,7 +45,7 @@ static void usage(void)" ip [ -force ] -batch filename\n" "where OBJECT := { link | addr | addrlabel | route | rule | neigh | ntable |\n" " tunnel | tuntap | maddr | mroute | mrule | monitor | xfrm |\n" -" netns | l2tp | tcp_metrics }\n" +" netns | l2tp | tcp_metrics | token }\n" " OPTIONS := { -V[ersion] | -s[tatistics] | -d[etails] | -r[esolve] |\n" " -f[amily] { inet | inet6 | ipx | dnet | bridge | link } |\n" " -4 | -6 | -I | -D | -B | -0 |\n"
@@ -80,6 +80,7 @@ static const struct cmd { { "tunl", do_iptunnel }, { "tuntap", do_iptuntap }, { "tap", do_iptuntap }, + { "token", do_iptoken }, { "tcpmetrics", do_tcp_metrics }, { "tcp_metrics",do_tcp_metrics }, { "monitor", do_ipmonitor },
ip/ip_common.h +1 -0
@@ -49,6 +49,7 @@ extern int do_xfrm(int argc, char **argv);extern int do_ipl2tp (int argc,char **argv);extern int do_tcp_metrics (int argc,char **argv);extern int do_ipnetconf (int argc,char **argv); +extern int do_iptoken (int argc,char **argv);static inline int rtm_get_table (struct rtmsg *r,struct rtattr **tb) {
ip/iptoken.c new file +210 -0
210 lines not on this page · raw message
man/man8/Makefile +1 -1
@@ -9,7 +9,7 @@ MAN8PAGES = $(TARGETS) ip.8 arpd.8 lnstat.8 routel.8 rtacct.8 rtmon.8 ss.8 \ ip-addrlabel.8 ip-l2tp.8 \ ip-maddress.8 ip-monitor.8 ip-mroute.8 ip-neighbour.8 \ ip-netns.8 ip-ntable.8 ip-rule.8 ip-tunnel.8 ip-xfrm.8 \ - ip-tcp_metrics.8 ip-netconf.8 + ip-tcp_metrics.8 ip-netconf.8 ip-token.8 all: $(TARGETS)
man/man8/ip-token.8 new file +66 -0
66 lines not on this page · raw message
Signature · 1 line
1.7.11.7
Quoted 16 lines · Daniel Borkmann
This patch adds support for tokenized IIDs, that enable administrators to assign well-known host-part addresses to nodes whilst still obtaining global network prefix from Router Advertisements. This is the iproute2 part for the kernel patch
f53adae4eae5(``net: ipv6: add tokenized interface identifier support'').Example commands with iproute2:
Setting a device token:
# ip token set ::1a:2b:3c:4d/64 dev eth1Getting a device token:
# ip token get dev eth1 token ::1a:2b:3c:4d dev eth1
Quoted 6 lines
Listing all tokens:
# ip token list (or: ip token) token :: dev eth0 token ::1a:2b:3c:4d dev eth1Signed-off-by Daniel Borkmann <[email protected]>
Thanks!
Stephen Hemminger
AppliedQuoted 16 lines · On Tue, 30 Apr 2013 18:22:50 +0200 Daniel Borkmann <[email protected]> wrote:
This patch adds support for tokenized IIDs, that enable administrators to assign well-known host-part addresses to nodes whilst still obtaining global network prefix from Router Advertisements. This is the iproute2 part for the kernel patch
f53adae4eae5(``net: ipv6: add tokenized interface identifier support'').Example commands with iproute2:
Setting a device token:
# ip token set ::1a:2b:3c:4d/64 dev eth1Getting a device token:
# ip token get dev eth1 token ::1a:2b:3c:4d dev eth1
Quoted 6 lines
Listing all tokens:
# ip token list (or: ip token) token :: dev eth0 token ::1a:2b:3c:4d dev eth1Signed-off-by Daniel Borkmann <[email protected]>
Applied