Staging: add USB MTK bluetooth driver
Subsystems (2)
PATCH 1/1 Staging: add USB MTK bluetooth driver
From: "Cho, Yu-Chen" <[email protected]>
This driver is for the Mediatek Bluetooth that can be found in many different laptops. It was written by Mediatek, but cleaned up to work properly in the kernel tree by SUSE.
--- drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/btmtk_usb/Kconfig | 11 + drivers/staging/btmtk_usb/Makefile | 1 + drivers/staging/btmtk_usb/README | 14 + drivers/staging/btmtk_usb/TODO | 9 + drivers/staging/btmtk_usb/btmtk_usb.c | 1793 +++++++++++++++++++++++++++++++++ drivers/staging/btmtk_usb/btmtk_usb.h | 138 +++ 8 files changed, 1969 insertions(+) create mode 100644 drivers/staging/btmtk_usb/Kconfig create mode 100644 drivers/staging/btmtk_usb/Makefile create mode 100644 drivers/staging/btmtk_usb/README create mode 100644 drivers/staging/btmtk_usb/TODO create mode 100644 drivers/staging/btmtk_usb/btmtk_usb.c create mode 100644 drivers/staging/btmtk_usb/btmtk_usb.h
drivers/staging/Kconfig +2 -0
@@ -140,4 +140,6 @@ source "drivers/staging/zcache/Kconfig" source "drivers/staging/goldfish/Kconfig" +source "drivers/staging/btmtk_usb/Kconfig" + endif # STAGING
drivers/staging/Makefile +1 -0
@@ -62,3 +62,4 @@ obj-$(CONFIG_SB105X) += sb105x/ obj-$(CONFIG_FIREWIRE_SERIAL) += fwserial/ obj-$(CONFIG_ZCACHE) += zcache/ obj-$(CONFIG_GOLDFISH) += goldfish/ +obj-$(CONFIG_USB_BTMTK) += btmkt_usb/
drivers/staging/btmtk_usb/Kconfig new file +11 -0
@@ -0,0 +1,11 @@ +config USB_BTMTK + tristate "Mediatek Bluetooth support" + depends on USB && BT && m + ---help--- + Say Y here if you wish to control a MTK USB Bluetooth. + + This option depends on 'USB' support being enabled + + To compile this driver as a module, choose M here: the + module will be called btmtk_usb. +
drivers/staging/btmtk_usb/Makefile new file +1 -0
@@ -0,0 +1 @@ +obj-$(CONFIG_USB_BTMTK) += btmtk_usb.o
drivers/staging/btmtk_usb/README new file +14 -0
@@ -0,0 +1,14 @@ +-build driver modules + make + +-install driver modules + make install + +-remove driver modules + make clean + +-dynamic debug message + turn on CONFIG_DYNAMIC_DEBUG compiler flag for current kernel + mount -t debugfs none /sys/kernel/debug/ + echo "module module_name +p" > /sys/kernel/debug/dynamic_debug/control(turn on debug messages, module name such as btmtk_usb) + echo "module module_name -p" > /sys/kernel/debug/dynamic_debug/control(turn off debug messages, module name such as btmtk_usb)
drivers/staging/btmtk_usb/TODO new file +9 -0
@@ -0,0 +1,9 @@ +TODO: + - checkpatch.pl clean + - determine if the driver should not be using a duplicate + version of the usb-bluetooth interface code, but should + be merged into the drivers/bluetooth/ directory and + infrastructure instead. + - review by the bluetooth developer community + +Please send any patches for this driver to Yu-Chen, Cho <[email protected]> and
drivers/staging/btmtk_usb/btmtk_usb.c new file +1793 -0
1,793 lines not on this page · raw message
drivers/staging/btmtk_usb/btmtk_usb.h new file +138 -0
138 lines not on this page · raw message
Signature · 1 line
1.8.1.4
Greg KH
maintainerdrivers/staging/btmtk_usb/btmtk_usb.c
Quoted 13 lines · Yu-Chen
drivers/staging/btmtk_usb/TODO new file +9
-0@@ -0,0 +1,9 @@ +TODO: + - checkpatch.pl clean + - determine if the driver should not be using a duplicate + version of the usb-bluetooth interface code, but should + be merged into the drivers/bluetooth/ directory and + infrastructure instead. + - review by the bluetooth developer community + +Please send any patches for this driver to Yu-Chen, Cho <[email protected]> anddrivers/staging/btmtk_usb/btmtk_usb.c +0
-0
I think you forgot to write the last line of this TODO file :)
Care to send a follow-on patch to fix this up?
thanks,
greg k-h
Greg KH
maintainerdrivers/staging/Makefile obj-$(CONFIG_SB105X) += sb105x/ · line 65
Quoted 9 lines · Yu-Chen
drivers/staging/Makefile +1
-0@@ -62,3 +62,4 @@ obj-$(CONFIG_SB105X) += sb105x/ obj-$(CONFIG_GOLDFISH) += goldfish/ obj-$(CONFIG_USB_DWC2) += dwc2/ obj-$(CONFIG_LUSTRE_FS) += lustre/ +obj-$(CONFIG_USB_BTMTK) += btmkt_usb/
You didn't actually test this patch, it breaks the build:
scripts/Makefile.build:44:/home/gregkh/linux/work/staging/drivers/staging/btmkt_usb/Makefile: No such file or directory make[3]: *** No rule to make target `/home/gregkh/linux/work/staging/drivers/staging/btmkt_usb/Makefile'. Stop.
Please refresh this against 3.10-rc1 and test that it builds properly and then resend it.
thanks,
greg k-h
Hi Greg,
Quoted 13 lines · Greg KH
drivers/staging/Makefile obj-$(CONFIG_SB105X) += sb105x/ · line 65
Quoted 9 lines · Yu-Chen
drivers/staging/Makefile +1
-0@@ -62,3 +62,4 @@ obj-$(CONFIG_SB105X) += sb105x/ obj-$(CONFIG_GOLDFISH) += goldfish/ obj-$(CONFIG_USB_DWC2) += dwc2/ obj-$(CONFIG_LUSTRE_FS) += lustre/ +obj-$(CONFIG_USB_BTMTK) += btmkt_usb/You didn't actually test this patch, it breaks the build:
Quoted 8 lines
scripts/Makefile.build:44:/home/gregkh/linux/work/staging/drivers/staging/btmkt_usb/Makefile: No such file or directory make[3]: *** No rule to make target `/home/gregkh/linux/work/staging/drivers/staging/btmkt_usb/Makefile'. Stop.Please refresh this against 3.10-rc1 and test that it builds properly and then resend it.
Yes, I found that , and I will refresh this against 3.10-rc1 and test that it builds then resend it soon.
Thanks a lot.
Sincerely,
AL