Skip to contentSkip to conversation

prep: Add ELF support for -bios

PATCH In review Andreas Färber 4 participants 7 messages May 5, 2013 – Jul 2, 2013

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 prep: Add ELF support for -bios

This prepares for switching from OpenHack'Ware to OpenBIOS.

While touching the error handling code, switch from aborting hw_error() to fprintf()+exit() and suppress failing without -bios for qtest.

---
 hw/ppc/prep.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)
hw/ppc/prep.c +22 -9
index 2ad5b41..afa62d7 100644
@@ -40,7 +40,9 @@
 #include "hw/isa/pc87312.h"
 #include "sysemu/blockdev.h"
 #include "sysemu/arch_init.h"
+#include "sysemu/qtest.h"
 #include "exec/address-spaces.h"
+#include "elf.h"
 
 //#define HARD_DEBUG_PPC_IO
 //#define DEBUG_PPC_IO
@@ -505,18 +507,29 @@ static void ppc_prep_init(QEMUMachineInitArgs *args)
         bios_name = BIOS_FILENAME;
     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
     if (filename) {
-        bios_size = get_image_size(filename);
+        bios_size = load_elf(filename, NULL, NULL, NULL,
+                             NULL, NULL, 1, ELF_MACHINE, 0);
+        if (bios_size < 0) {
+            bios_size = get_image_size(filename);
+            if (bios_size > 0 && bios_size <= BIOS_SIZE) {
+                hwaddr bios_addr;
+                bios_size = (bios_size + 0xfff) & ~0xfff;
+                bios_addr = (uint32_t)(-bios_size);
+                bios_size = load_image_targphys(filename, bios_addr, bios_size);
+            }
+            if (bios_size > BIOS_SIZE) {
+                fprintf(stderr, "qemu: PReP bios '%s' is too large (0x%x)\n",
+                        bios_name, bios_size);
+                exit(1);
+            }
+        }
     } else {
         bios_size = -1;
     }
-    if (bios_size > 0 && bios_size <= BIOS_SIZE) {
-        hwaddr bios_addr;
-        bios_size = (bios_size + 0xfff) & ~0xfff;
-        bios_addr = (uint32_t)(-bios_size);
-        bios_size = load_image_targphys(filename, bios_addr, bios_size);
-    }
-    if (bios_size < 0 || bios_size > BIOS_SIZE) {
-        hw_error("qemu: could not load PPC PREP bios '%s'\n", bios_name);
+    if (bios_size < 0 && !qtest_enabled()) {
+        fprintf(stderr, "qemu: could not load PPC PReP bios '%s'\n",
+                bios_name);
+        exit(1);
     }
     if (filename) {
         g_free(filename);
Signature · 1 line
1.8.1.4
Acked-by on v2 1/1
#1 lore raw

Am 05.05.2013 um 19:45 schrieb Andreas Färber <[email protected]>:

Quoted 6 lines

This prepares for switching from OpenHack'Ware to OpenBIOS.

While touching the error handling code, switch from aborting hw_error() to fprintf()+exit() and suppress failing without -bios for qtest.

Alex

Quoted 60 lines

---
hw/ppc/prep.c | 31 ++++++++++++++++++++++---------

1 file changed, 22 insertions(+), 9 deletions(-)
hw/ppc/prep.c +22 -9
index 2ad5b41..afa62d7 100644
@@ -40,7 +40,9 @@
 #include "hw/isa/pc87312.h"
 #include "sysemu/blockdev.h"
 #include "sysemu/arch_init.h"
+#include "sysemu/qtest.h"
 #include "exec/address-spaces.h"
+#include "elf.h"
 
 //#define HARD_DEBUG_PPC_IO
 //#define DEBUG_PPC_IO
@@ -505,18 +507,29 @@ static void ppc_prep_init(QEMUMachineInitArgs *args)
        bios_name = BIOS_FILENAME;
    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
    if (filename) {
-        bios_size = get_image_size(filename);
+        bios_size = load_elf(filename, NULL, NULL, NULL,
+                             NULL, NULL, 1, ELF_MACHINE, 0);
+        if (bios_size < 0) {
+            bios_size = get_image_size(filename);
+            if (bios_size > 0 && bios_size <= BIOS_SIZE) {
+                hwaddr bios_addr;
+                bios_size = (bios_size + 0xfff) & ~0xfff;
+                bios_addr = (uint32_t)(-bios_size);
+                bios_size = load_image_targphys(filename, bios_addr, bios_size);
+            }
+            if (bios_size > BIOS_SIZE) {
+                fprintf(stderr, "qemu: PReP bios '%s' is too large (0x%x)\n",
+                        bios_name, bios_size);
+                exit(1);
+            }
+        }
    } else {
        bios_size = -1;
    }
-    if (bios_size > 0 && bios_size <= BIOS_SIZE) {
-        hwaddr bios_addr;
-        bios_size = (bios_size + 0xfff) & ~0xfff;
-        bios_addr = (uint32_t)(-bios_size);
-        bios_size = load_image_targphys(filename, bios_addr, bios_size);
-    }
-    if (bios_size < 0 || bios_size > BIOS_SIZE) {
-        hw_error("qemu: could not load PPC PREP bios '%s'\n", bios_name);
+    if (bios_size < 0 && !qtest_enabled()) {
+        fprintf(stderr, "qemu: could not load PPC PReP bios '%s'\n",
+                bios_name);
+        exit(1);
    }
    if (filename) {
        g_free(filename);
Signature · 1 line
1.8.1.4
author Applied
#2 lore raw

Am 05.05.2013 20:40, schrieb Alexander Graf:

Quoted 4 lines

Am 05.05.2013 um 19:45 schrieb Andreas Färber <[email protected]>:

Quoted 8 lines
Quoted 6 lines

This prepares for switching from OpenHack'Ware to OpenBIOS.

While touching the error handling code, switch from aborting hw_error() to fprintf()+exit() and suppress failing without -bios for qtest.

Thanks, applied to prep-up:
http://repo.or.cz/w/qemu/afaerber.git/shortlog/refs/heads/prep-up

Sorry, forgot the changelog:
* error handling was split up as suggested by Alex,
* missing exit(1) calls were added and
* (partial) qtest support was added.

Andreas

#3 lore raw
Quoted 12 lines · Andreas Färber

Am 05.05.2013 20:40, schrieb Alexander Graf:

Quoted 11 lines

Am 05.05.2013 um 19:45 schrieb Andreas Färber <[email protected]>:

Quoted 6 lines

This prepares for switching from OpenHack'Ware to OpenBIOS.

While touching the error handling code, switch from aborting hw_error() to fprintf()+exit() and suppress failing without -bios for qtest.

Quoted 8 lines
Quoted 1 line

Thanks, applied to prep-up:
http://repo.or.cz/w/qemu/afaerber.git/shortlog/refs/heads/prep-up

Sorry, forgot the changelog:
* error handling was split up as suggested by Alex,
* missing exit(1) calls were added and

BTW, why do you use fprintf()+exit() instead of hw_error()?

Signature · 1 line
Fabien Chouteau
#4 lore raw

Am 06.05.2013 09:55, schrieb Fabien Chouteau:

Quoted 15 lines · Andreas Färber
Quoted 14 lines

Am 05.05.2013 20:40, schrieb Alexander Graf:

Quoted 12 lines

Am 05.05.2013 um 19:45 schrieb Andreas Färber <[email protected]>:

Quoted 6 lines

This prepares for switching from OpenHack'Ware to OpenBIOS.

While touching the error handling code, switch from aborting hw_error() to fprintf()+exit() and suppress failing without -bios for qtest.

Quoted 8 lines
Quoted 6 lines

Thanks, applied to prep-up:
http://repo.or.cz/w/qemu/afaerber.git/shortlog/refs/heads/prep-up

Sorry, forgot the changelog:
* error handling was split up as suggested by Alex,
* missing exit(1) calls were added and

BTW, why do you use fprintf()+exit() instead of hw_error()?

That error is triggered by the user specifying a wrong -bios argument, so we should fail gracefully (similar discussion about -m a while back) and the CPU states are not so interesting at that point.

Andreas

#5 lore raw
In reply to Andreas Färber

2013/5/5 Andreas Färber <[email protected]>:

Quoted 5 lines

This prepares for switching from OpenHack'Ware to OpenBIOS.

While touching the error handling code, switch from aborting hw_error() to fprintf()+exit() and suppress failing without -bios for qtest.

I still can't run bare-metal elf programs from -bios option. Where is the instruction pointer set to the elf program entry address ?

E.g. trying to run a bare-metal infinite loop linked at 0x4XXX. adresses :
./qemu-system-ppc -M prep -m 256M -bios loop.elf -nographic -d in_asm QEMU 1.5.50 monitor - type 'help' for more information
(qemu)
invalid/unsupported opcode: 00 - 00 - 00 (00000000) fffffffc 0 IN:
0xfffffffc: .long 0x0

invalid/unsupported opcode: 00 - 00 - 00 (00000000) fff00700 0 IN:
0xfff00700: .long 0x0

--
Julio Guerra

#6 lore raw

Am 02.07.2013 15:39, schrieb Julio Guerra:

Quoted 9 lines

2013/5/5 Andreas Färber <[email protected]>:

Quoted 5 lines

This prepares for switching from OpenHack'Ware to OpenBIOS.

While touching the error handling code, switch from aborting hw_error() to fprintf()+exit() and suppress failing without -bios for qtest.

I still can't run bare-metal elf programs from -bios option. Where is the instruction pointer set to the elf program entry address ?

By definition, bare-metal programs run on real hardware and thus need to have their entry point where the hardware expects it - either 0xfffffffc or 0xfff00100 depending on -cpu model.

Note that when you run a -bios, no other firmware is loaded before, so you need to populate the exception vectors yourself, such as 0xfff00700 below. You can peek at how OpenBIOS handles this for an example.

Magically changing the CPU's reset vector would be a clear deviation from the hardware we're modelling. But if you spot differences between real hardware and QEMU please do report that.

If you want to load a kernel on top of firmware (i.e., not bare-metal), use -kernel instead.
On PReP that currently uses OpenHack'Ware; my latest attempts to switch to OpenBIOS exited unexpectedly from the Forth runtime - any help with debugging appreciated.

Andreas

Quoted 15 lines

E.g. trying to run a bare-metal infinite loop linked at 0x4XXX. adresses :
./qemu-system-ppc -M prep -m 256M -bios loop.elf -nographic -d in_asm QEMU 1.5.50 monitor - type 'help' for more information
(qemu)
invalid/unsupported opcode: 00 - 00 - 00 (00000000) fffffffc 0 IN:
0xfffffffc: .long 0x0

invalid/unsupported opcode: 00 - 00 - 00 (00000000) fff00700 0 IN:
0xfff00700: .long 0x0

--
Julio Guerra