powerpc/pci: Support per-aperture memory offset
Subsystems (3)
PATCH 1/1 powerpc/pci: Support per-aperture memory offset
The PCI core supports an offset per aperture nowadays but our arch code still has a single offset per host bridge representing the difference betwen CPU memory addresses and PCI MMIO addresses.
This is a problem as new machines and hypervisor versions are coming out where the 64-bit windows will have a different offset (basically mapped 1:1) from the 32-bit windows.
This fixes it by using separate offsets. In the long run, we probably want to get rid of that intermediary struct pci_controller and have those directly stored into the pci_host_bridge as they are parsed but this will be a more invasive change.
---
Now, this is a big one but I'd like to still merge it for 3.10 because we're having new machine coming up (and new versions of pHyp on existing machines) that are going to expose MMIO windows with different offsets (basically our 64-bit windows are 1:1 and our 32-bit windows remapped).
I'm not expecting any major issue with the patch, I've tested it on some of our machines here and will test it more during the next couple of days the notable thing is the removal of a "workaround" / fallback on 32-bit that I suspect only ever mattered for machines long unsupported (PReP ?) as I don't think we have anything that doesn't populate the bridge resources and expects to work nowadays (other stuff would break anyway).
This is also why I'm NAK'ing the patch making pci_process_bridge_OF_ranges() generic since I need to change it for powerpc and this isn't the right long term approach (we should "merge" pci_controller & pci_host_bridge instead and directly populate the pci_host_bridge apertures).
If I see no major issue with the patch during the next few days, I'll send it to Linus with my next pull request, probably at -rc1.
Kumar, Scott, Sethi, please test on FSL HW. I'll take care of macs and 4xx in addition to the various IBM ppc64 platforms.
Ben.
arch/powerpc/include/asm/pci-bridge.h | 6 +- arch/powerpc/kernel/pci-common.c | 97 ++++++++------------------- arch/powerpc/kernel/pci_32.c | 2 +- arch/powerpc/kernel/pci_64.c | 2 +- arch/powerpc/platforms/embedded6xx/mpc10x.h | 11 --- arch/powerpc/platforms/powermac/pci.c | 2 +- arch/powerpc/platforms/powernv/pci-ioda.c | 10 +-- arch/powerpc/platforms/wsp/wsp_pci.c | 2 +- arch/powerpc/sysdev/fsl_pci.c | 11 +-- arch/powerpc/sysdev/ppc4xx_pci.c | 15 +++-- 10 files changed, 54 insertions(+), 104 deletions(-)
arch/powerpc/include/asm/pci-bridge.h +1 -5
@@ -39,11 +39,6 @@ struct pci_controller {resource_size_t io_base_phys;resource_size_t pci_io_size; -/* Some machines (PReP) have a non 1:1 mapping of -* the PCI memory space in the CPU bus space -*/ -resource_size_t pci_mem_offset; -/* Some machines have a special region to forward the ISA * "memory" cycles such as VGA memory regions. Left to 0 * if unsupported
@@ -86,6 +81,7 @@ struct pci_controller {*/ struct resource io_resource;struct resource mem_resources[3 ]; +resource_size_t mem_offset[3 ];int global_number;/* PCI domain number */ resource_size_t dma_window_base_cur;
arch/powerpc/kernel/pci-common.c +28 -69
164 lines not on this page · raw message
arch/powerpc/kernel/pci_32.c +1 -1
@@ -295,7 +295,7 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)case IOBASE_BRIDGE_NUMBER :return (long )hose->first_busno;case IOBASE_MEMORY : -return (long )hose->pci_mem_offset; +return (long )hose->mem_offset[0 ];case IOBASE_IO :return (long )hose->io_base_phys;case IOBASE_ISA_IO :
arch/powerpc/kernel/pci_64.c +1 -1
@@ -246,7 +246,7 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus,case IOBASE_BRIDGE_NUMBER :return (long )hose->first_busno;case IOBASE_MEMORY : -return (long )hose->pci_mem_offset; +return (long )hose->mem_offset[0 ];case IOBASE_IO :return (long )hose->io_base_phys;case IOBASE_ISA_IO :
arch/powerpc/platforms/embedded6xx/mpc10x.h +0 -11
@@ -81,17 +81,6 @@#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \ MPC10X_MAPB_PCI_MEM_START) -/* Set hose members to values appropriate for the mem map used */ -#define MPC10X_SETUP_HOSE (hose, map) { \ - (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \ - (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \ - (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \ - (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \ - (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \ - (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \ -} - -/* Miscellaneous Configuration register offsets */ #define MPC10X_CFG_PIR_REG 0x09#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00
arch/powerpc/platforms/powermac/pci.c +1 -1
@@ -824,6 +824,7 @@ static void __init parse_region_decode(struct pci_controller *hose, hose->mem_resources[cur].name = hose->dn->full_name; hose->mem_resources[cur].start = base; hose->mem_resources[cur].end = end; + hose->mem_offset[cur] =0 ;DBG (" %d: 0x%08lx-0x%08lx\n" , cur, base, end); }else {DBG (" : -0x%08lx\n" , end);
@@ -866,7 +867,6 @@ static void __init setup_u3_ht(struct pci_controller* hose) hose->io_resource.start =0 ; hose->io_resource.end =0x003fffff ; hose->io_resource.flags =IORESOURCE_IO ; - hose->pci_mem_offset =0 ; hose->first_busno =0 ; hose->last_busno =0xef ;
arch/powerpc/platforms/powernv/pci-ioda.c +6 -4
@@ -915,11 +915,14 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose, index++; } }else if (res->flags &IORESOURCE_MEM ) { +/* WARNING: Assumes M32 is mem region 0 in PHB. We need to +* harden that algorithm when we start supporting M64 +*/ region.start = res->start - - hose->pci_mem_offset - + hose->mem_offset[0 ] - phb->ioda.m32_pci_base; region.end = res->end - - hose->pci_mem_offset - + hose->mem_offset[0 ] - phb->ioda.m32_pci_base; index = region.start / phb->ioda.m32_segsize;
@@ -1115,8 +1118,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type) phb->ioda.m32_size +=0x10000 ; phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe; - phb->ioda.m32_pci_base = hose->mem_resources[0 ].start - - hose->pci_mem_offset; + phb->ioda.m32_pci_base = hose->mem_resources[0 ].start - hose->mem_offset[0 ]; phb->ioda.io_size = hose->pci_io_size; phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe; phb->ioda.io_pci_base =0 ;/* XXX calculate this ? */
arch/powerpc/platforms/wsp/wsp_pci.c +1 -1
@@ -502,7 +502,7 @@ static void __init wsp_pcie_configure_hw(struct pci_controller *hose) (~(hose->mem_resources[0 ].end - hose->mem_resources[0].start)) & 0x3ffffff0000ul);out_be64 (hose->cfg_data +PCIE_REG_M32A_START_ADDR , - (hose->mem_resources[0 ].start - hose->pci_mem_offset) |1 ); + (hose->mem_resources[0 ].start - hose->mem_offset[0 ]) |1 );/* Clear all TVT entries *
arch/powerpc/sysdev/fsl_pci.c +6 -5
@@ -178,7 +178,7 @@ static void setup_pci_atmu(struct pci_controller *hose)struct ccsr_pci __iomem *pci = hose->private_data;int i, j, n, mem_log, win_idx =3 , start_idx =1 , end_idx =4 ;u64 mem, sz, paddr_hi =0 ; -u64 paddr_lo =ULLONG_MAX ; +u64 offset =0 , paddr_lo =ULLONG_MAX ;u32 pcicsrbar =0 , pcicsrbar_sz;u32 piwar =PIWAR_EN |PIWAR_PF |PIWAR_TGI_LOCAL |PIWAR_READ_SNOOP |PIWAR_WRITE_SNOOP ;
@@ -208,8 +208,9 @@ static void setup_pci_atmu(struct pci_controller *hose) paddr_lo =min (paddr_lo, (u64 )hose->mem_resources[i].start); paddr_hi =max (paddr_hi, (u64 )hose->mem_resources[i].end); - n =setup_one_atmu (pci, j, &hose->mem_resources[i], - hose->pci_mem_offset); +/* We assume all memory resources have the same offset */ + offset = hose->mem_offset[i]; + n =setup_one_atmu (pci, j, &hose->mem_resources[i], offset);if (n <0 || j >=5 ) {pr_err ("Ran out of outbound PCI ATMUs for resource %d!\n" , i);
@@ -239,8 +240,8 @@ static void setup_pci_atmu(struct pci_controller *hose) }/* convert to pci address space */ - paddr_hi -= hose->pci_mem_offset; - paddr_lo -= hose->pci_mem_offset; + paddr_hi -= offset; + paddr_lo -= offset;if (paddr_hi == paddr_lo) {pr_err ("%s: No outbound window space\n" , name);
arch/powerpc/sysdev/ppc4xx_pci.c +9 -6
@@ -257,6 +257,7 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,/* Setup outbound memory windows */ for (i = j =0 ; i <3 ; i++) {struct resource *res = &hose->mem_resources[i]; +resource_size_t offset = hose->mem_offset[i];/* we only care about memory windows */ if (!(res->flags &IORESOURCE_MEM ))
@@ -270,7 +271,7 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,/* Configure the resource */ if (ppc4xx_setup_one_pci_PMM (hose, reg, res->start, - res->start - hose->pci_mem_offset, + res->start - offset,resource_size (res), res->flags, j) ==0 ) {
@@ -279,7 +280,7 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,/* If the resource PCI address is 0 then we have our * ISA memory hole */ -if (res->start == hose->pci_mem_offset) +if (res->start == offset) found_isa_hole =1 ; } }
@@ -457,6 +458,7 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,/* Setup outbound memory windows */ for (i = j =0 ; i <3 ; i++) {struct resource *res = &hose->mem_resources[i]; +resource_size_t offset = hose->mem_offset[i];/* we only care about memory windows */ if (!(res->flags &IORESOURCE_MEM ))
@@ -470,7 +472,7 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,/* Configure the resource */ if (ppc4xx_setup_one_pcix_POM (hose, reg, res->start, - res->start - hose->pci_mem_offset, + res->start - offset,resource_size (res), res->flags, j) ==0 ) {
@@ -479,7 +481,7 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,/* If the resource PCI address is 0 then we have our * ISA memory hole */ -if (res->start == hose->pci_mem_offset) +if (res->start == offset) found_isa_hole =1 ; } }
@@ -1792,6 +1794,7 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,/* Setup outbound memory windows */ for (i = j =0 ; i <3 ; i++) {struct resource *res = &hose->mem_resources[i]; +resource_size_t offset = hose->mem_offset[i];/* we only care about memory windows */ if (!(res->flags &IORESOURCE_MEM ))
@@ -1805,7 +1808,7 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,/* Configure the resource */ if (ppc4xx_setup_one_pciex_POM (port, hose, mbase, res->start, - res->start - hose->pci_mem_offset, + res->start - offset,resource_size (res), res->flags, j) ==0 ) {
@@ -1814,7 +1817,7 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,/* If the resource PCI address is 0 then we have our * ISA memory hole */ -if (res->start == hose->pci_mem_offset) +if (res->start == offset) found_isa_hole =1 ; } }
Bjorn Helgaas
maintainerQuoted 8 lines · Benjamin Herrenschmidt
The PCI core supports an offset per aperture nowadays but our arch code still has a single offset per host bridge representing the difference betwen CPU memory addresses and PCI MMIO addresses.
This is a problem as new machines and hypervisor versions are coming out where the 64-bit windows will have a different offset (basically mapped 1:1) from the 32-bit windows.
Quoted 6 lines
This fixes it by using separate offsets. In the long run, we probably want to get rid of that intermediary struct
pci_controllerand have those directly stored into thepci_host_bridgeas they are parsed but this will be a more invasive change.Signed-off-by Benjamin Herrenschmidt <[email protected]>
This doesn't touch the PCI core, but it looks good to me, for whatever that's worth.
Quoted 185 lines
---
Now, this is a big one but I'd like to still merge it for 3.10 because we're having new machine coming up (and new versions of pHyp on existing machines) that are going to expose MMIO windows with different offsets (basically our 64-bit windows are 1:1 and our 32-bit windows remapped).
I'm not expecting any major issue with the patch, I've tested it on some of our machines here and will test it more during the next couple of days the notable thing is the removal of a "workaround" / fallback on 32-bit that I suspect only ever mattered for machines long unsupported (PReP ?) as I don't think we have anything that doesn't populate the bridge resources and expects to work nowadays (other stuff would break anyway).
This is also why I'm NAK'ing the patch making
pci_process_bridge_OF_ranges()generic since I need to change it for powerpc and this isn't the right long term approach (we should "merge"pci_controller&pci_host_bridgeinstead and directly populate thepci_host_bridgeapertures).If I see no major issue with the patch during the next few days, I'll send it to Linus with my next pull request, probably at -rc1.
Kumar, Scott, Sethi, please test on FSL HW. I'll take care of macs and 4xx in addition to the various IBM ppc64 platforms.
Ben.
arch/powerpc/include/asm/pci-bridge.h | 6 +- arch/powerpc/kernel/pci-common.c | 97 ++++++++------------------- arch/powerpc/kernel/pci_32.c | 2 +- arch/powerpc/kernel/pci_64.c | 2 +- arch/powerpc/platforms/embedded6xx/mpc10x.h | 11 --- arch/powerpc/platforms/powermac/pci.c | 2 +- arch/powerpc/platforms/powernv/pci-ioda.c | 10 +-- arch/powerpc/platforms/wsp/wsp_pci.c | 2 +- arch/powerpc/sysdev/fsl_pci.c | 11 +-- arch/powerpc/sysdev/ppc4xx_pci.c | 15 +++-- 10 files changed, 54 insertions(+), 104 deletions(-)arch/powerpc/include/asm/pci-bridge.h +1
-5@@ -39,11 +39,6 @@ struct pci_controller {resource_size_t io_base_phys;resource_size_t pci_io_size; -/* Some machines (PReP) have a non 1:1 mapping of -* the PCI memory space in the CPU bus space -*/ -resource_size_t pci_mem_offset; -/* Some machines have a special region to forward the ISA * "memory" cycles such as VGA memory regions. Left to 0 * if unsupported @@ -86,6 +81,7 @@ struct pci_controller {*/ struct resource io_resource;struct resource mem_resources[3 ]; +resource_size_t mem_offset[3 ];int global_number;/* PCI domain number */ resource_size_t dma_window_base_cur;arch/powerpc/kernel/pci-common.c +13
-46@@ -786,22 +786,8 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, hose->isa_mem_size = size; } -/* We get the PCI/Mem offset from the first range or -* the, current one if the offset came from an ISA -* hole. If they don't match, bugger. -*/ -if (memno ==0 || - (isa_hole >=0 && pci_addr !=0 && - hose->pci_mem_offset == isa_mb)) - hose->pci_mem_offset = cpu_addr - pci_addr; -else if (pci_addr !=0 && - hose->pci_mem_offset != cpu_addr - pci_addr) { -printk (KERN_INFO -" \\--> Skipped (offset mismatch) !\n" ); -continue ; - } -/* Build resource */ + hose->mem_offset[memno] = cpu_addr - pci_addr; res = &hose->mem_resources[memno++]; res->flags =IORESOURCE_MEM ;if (pci_space &0x40000000 )@@ -817,20 +803,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, res->child =NULL ; } } - -/* If there's an ISA hole and the pci_mem_offset is -not- matching -* the ISA hole offset, then we need to remove the ISA hole from -* the resource list for that brige -*/ -if (isa_hole >=0 && hose->pci_mem_offset != isa_mb) { -unsigned int next = isa_hole +1 ; -printk (KERN_INFO " Removing ISA hole at 0x%016llx\n" , isa_mb); -if (next < memno) -memmove (&hose->mem_resources[isa_hole], - &hose->mem_resources[next], -sizeof (struct resource ) * (memno - next)); - hose->mem_resources[--memno].flags =0 ; - } }/* Decide whether to display the domain number in /proc */ @@ -916,6 +888,7 @@ static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,struct pci_controller *hose =pci_bus_to_host (bus);struct pci_dev *dev = bus->self;resource_size_t offset; +struct pci_bus_region region;u16 command;int i;@@ -925,10 +898,10 @@ static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,/* Job is a bit different between memory and IO */ if (res->flags &IORESOURCE_MEM ) { -/* If the BAR is non-0 (res != pci_mem_offset) then it's probably been -* initialized by somebody -*/ -if (res->start != hose->pci_mem_offset) +pcibios_resource_to_bus (dev, ®ion, res); + +/* If the BAR is non-0 then it's probably been initialized */ +if (region.start !=0 )return 0 ;/* The BAR is 0, let's check if memory decoding is enabled on @@ -940,11 +913,11 @@ static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,/* Memory decoding is enabled and the BAR is 0. If any of the bridge * resources covers that starting address (0 then it's good enough for -* us for memory +* us for memory space) */ for (i =0 ; i <3 ; i++) {if ((hose->mem_resources[i].flags &IORESOURCE_MEM ) && - hose->mem_resources[i].start == hose->pci_mem_offset) + hose->mem_resources[i].start == hose->mem_offset[i])return 0 ; }@@ -1381,10 +1354,9 @@ static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus) no_io:/* Check for memory */ - offset = hose->pci_mem_offset; -pr_debug ("hose mem offset: %016llx\n" , (unsigned long long )offset);for (i =0 ; i <3 ; i++) { pres = &hose->mem_resources[i]; + offset = hose->mem_offset[i];if (!(pres->flags &IORESOURCE_MEM ))continue ;pr_debug ("hose mem res: %pR\n" , pres);@@ -1524,6 +1496,7 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose, struct list_head *resources) {struct resource *res; +resource_size_t offset;int i;/* Hookup PHB IO resource */ @@ -1533,51 +1506,37 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,printk (KERN_WARNING "PCI: I/O resource not set for host" " bridge %s (domain %d)\n" , hose->dn->full_name, hose->global_number); -#ifdef CONFIG_PPC32 -/* Workaround for lack of IO resource only on 32-bit */ - res->start = (unsigned long )hose->io_base_virt - isa_io_base; - res->end = res->start +IO_SPACE_LIMIT ; - res->flags =IORESOURCE_IO ; -#endif /* CONFIG_PPC32 */ - } -if (res->flags) { - pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n", + }else { + offset =pcibios_io_space_offset (hose); +
arch/powerpc/kernel/pci-common.c static void pcibios_setup_phb_resources(struct pci_controller *hose, · line 1516
Quoted 10 lines
arch/powerpc/kernel/pci-common.c +3
-5+pr_debug ("PCI: PHB IO resource = %08llx-%08llx [%lx] off 0x%08llx\n" , (unsigned long long )res->start, (unsigned long long )res->end, - (unsigned long)res->flags); -pci_add_resource_offset (resources, res,pcibios_io_space_offset (hose)); - -pr_debug ("PCI: PHB IO offset = %08lx\n" , - (unsigned long )hose->io_base_virt - _IO_BASE); + (unsigned long )res->flags, + (unsigned long long )offset);
If you use %pR, these will match any similar messages from the PCI core.
arch/powerpc/kernel/pci-common.c static void pcibios_setup_phb_resources(struct pci_controller *hose, · line 1526
Quoted 12 lines
arch/powerpc/kernel/pci-common.c +1
-2+pci_add_resource_offset (resources, res, offset); }/* Hookup PHB Memory resources */ for (i =0 ; i <3 ; ++i) { res = &hose->mem_resources[i];if (!res->flags) { -if (i >0 ) -continue ;printk (KERN_ERR "PCI: Memory resource 0 not set for " "host bridge %s (domain %d)\n" , hose->dn->full_name, hose->global_number);
I don't understand what's going on here, but the message no longer matches the code (we refer to "Memory resource 0," but it might be 0, 1, or 2).
Quoted 65 lines
arch/powerpc/kernel/pci-common.c +11
-16-#ifdef CONFIG_PPC32 -/* Workaround for lack of MEM resource only on 32-bit */ - res->start = hose->pci_mem_offset; - res->end = (resource_size_t)-1LL ; - res->flags =IORESOURCE_MEM ; -#endif /* CONFIG_PPC32 */ - } -if (res->flags) { -pr_debug ("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n" , i, - (unsigned long long )res->start, - (unsigned long long )res->end, - (unsigned long )res->flags); -pci_add_resource_offset (resources, res, hose->pci_mem_offset); +continue ; } - } + offset = hose->mem_offset[i]; -pr_debug ("PCI: PHB MEM offset = %016llx\n" , - (unsigned long long )hose->pci_mem_offset); + +pr_debug ("PCI: PHB MEM resource %d = %08llx-%08llx [%lx] off 0x%08llx\n" , i, + (unsigned long long )res->start, + (unsigned long long )res->end, + (unsigned long )res->flags, + (unsigned long long )offset); + +pci_add_resource_offset (resources, res, offset); + } }/* arch/powerpc/kernel/pci_32.c +1
-1@@ -295,7 +295,7 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)case IOBASE_BRIDGE_NUMBER :return (long )hose->first_busno;case IOBASE_MEMORY : -return (long )hose->pci_mem_offset; +return (long )hose->mem_offset[0 ];case IOBASE_IO :return (long )hose->io_base_phys;case IOBASE_ISA_IO :arch/powerpc/kernel/pci_64.c +1
-1@@ -246,7 +246,7 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus,case IOBASE_BRIDGE_NUMBER :return (long )hose->first_busno;case IOBASE_MEMORY : -return (long )hose->pci_mem_offset; +return (long )hose->mem_offset[0 ];case IOBASE_IO :return (long )hose->io_base_phys;case IOBASE_ISA_IO :arch/powerpc/platforms/embedded6xx/mpc10x.h +0
-0@@ -81,17 +81,6 @@#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \ MPC10X_MAPB_PCI_MEM_START)
arch/powerpc/platforms/embedded6xx/mpc10x.h line 92
Quoted 10 lines
arch/powerpc/platforms/embedded6xx/mpc10x.h +0
-9-/* Set hose members to values appropriate for the mem map used */ -#define MPC10X_SETUP_HOSE (hose, map) { \ - (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \ - (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \ - (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \ - (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \ - (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \ - (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \ -}
I guess this was previously unused; I don't see any corresponding changes to a user of MPC10X_SETUP_HOSE().
Quoted 83 lines
arch/powerpc/platforms/embedded6xx/mpc10x.h +0
-2- -/* Miscellaneous Configuration register offsets */ #define MPC10X_CFG_PIR_REG 0x09#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00arch/powerpc/platforms/powermac/pci.c +1
-1@@ -824,6 +824,7 @@ static void __init parse_region_decode(struct pci_controller *hose, hose->mem_resources[cur].name = hose->dn->full_name; hose->mem_resources[cur].start = base; hose->mem_resources[cur].end = end; + hose->mem_offset[cur] =0 ;DBG (" %d: 0x%08lx-0x%08lx\n" , cur, base, end); }else {DBG (" : -0x%08lx\n" , end);@@ -866,7 +867,6 @@ static void __init setup_u3_ht(struct pci_controller* hose) hose->io_resource.start =0 ; hose->io_resource.end =0x003fffff ; hose->io_resource.flags =IORESOURCE_IO ; - hose->pci_mem_offset =0 ; hose->first_busno =0 ; hose->last_busno =0xef ;arch/powerpc/platforms/powernv/pci-ioda.c +6
-4@@ -915,11 +915,14 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose, index++; } }else if (res->flags &IORESOURCE_MEM ) { +/* WARNING: Assumes M32 is mem region 0 in PHB. We need to +* harden that algorithm when we start supporting M64 +*/ region.start = res->start - - hose->pci_mem_offset - + hose->mem_offset[0 ] - phb->ioda.m32_pci_base; region.end = res->end - - hose->pci_mem_offset - + hose->mem_offset[0 ] - phb->ioda.m32_pci_base; index = region.start / phb->ioda.m32_segsize;@@ -1115,8 +1118,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type) phb->ioda.m32_size +=0x10000 ; phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe; - phb->ioda.m32_pci_base = hose->mem_resources[0 ].start - - hose->pci_mem_offset; + phb->ioda.m32_pci_base = hose->mem_resources[0 ].start - hose->mem_offset[0 ]; phb->ioda.io_size = hose->pci_io_size; phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe; phb->ioda.io_pci_base =0 ;/* XXX calculate this ? */ arch/powerpc/platforms/wsp/wsp_pci.c +1
-1@@ -502,7 +502,7 @@ static void __init wsp_pcie_configure_hw(struct pci_controller *hose) (~(hose->mem_resources[0 ].end - hose->mem_resources[0].start)) & 0x3ffffff0000ul);out_be64 (hose->cfg_data +PCIE_REG_M32A_START_ADDR , - (hose->mem_resources[0 ].start - hose->pci_mem_offset) |1 ); + (hose->mem_resources[0 ].start - hose->mem_offset[0 ]) |1 );/* Clear all TVT entries * arch/powerpc/sysdev/fsl_pci.c +1
-1@@ -178,7 +178,7 @@ static void setup_pci_atmu(struct pci_controller *hose)struct ccsr_pci __iomem *pci = hose->private_data;int i, j, n, mem_log, win_idx =3 , start_idx =1 , end_idx =4 ;u64 mem, sz, paddr_hi =0 ; -u64 paddr_lo =ULLONG_MAX ; +u64 offset =0 , paddr_lo =ULLONG_MAX ;u32 pcicsrbar =0 , pcicsrbar_sz;u32 piwar =PIWAR_EN |PIWAR_PF |PIWAR_TGI_LOCAL |PIWAR_READ_SNOOP |PIWAR_WRITE_SNOOP ;
arch/powerpc/sysdev/fsl_pci.c static void setup_pci_atmu(struct pci_controller *hose) · line 212
Quoted 7 lines
arch/powerpc/sysdev/fsl_pci.c +2
-2@@ -208,8 +208,9 @@ static void setup_pci_atmu(struct pci_controller *hose) paddr_lo =min (paddr_lo, (u64 )hose->mem_resources[i].start); paddr_hi =max (paddr_hi, (u64 )hose->mem_resources[i].end); - n =setup_one_atmu (pci, j, &hose->mem_resources[i], - hose->pci_mem_offset); +/* We assume all memory resources have the same offset */ + offset = hose->mem_offset[i];
This code doesn't *look* like you're assuming all resources have the same offset, although maybe elsewhere you set every hose->mem_offset[i] to the same value.
Quoted 99 lines
arch/powerpc/sysdev/fsl_pci.c +3
-2+ n =setup_one_atmu (pci, j, &hose->mem_resources[i], offset);if (n <0 || j >=5 ) {pr_err ("Ran out of outbound PCI ATMUs for resource %d!\n" , i);@@ -239,8 +240,8 @@ static void setup_pci_atmu(struct pci_controller *hose) }/* convert to pci address space */ - paddr_hi -= hose->pci_mem_offset; - paddr_lo -= hose->pci_mem_offset; + paddr_hi -= offset; + paddr_lo -= offset;if (paddr_hi == paddr_lo) {pr_err ("%s: No outbound window space\n" , name);arch/powerpc/sysdev/ppc4xx_pci.c +9
-6@@ -257,6 +257,7 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,/* Setup outbound memory windows */ for (i = j =0 ; i <3 ; i++) {struct resource *res = &hose->mem_resources[i]; +resource_size_t offset = hose->mem_offset[i];/* we only care about memory windows */ if (!(res->flags &IORESOURCE_MEM ))@@ -270,7 +271,7 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,/* Configure the resource */ if (ppc4xx_setup_one_pci_PMM (hose, reg, res->start, - res->start - hose->pci_mem_offset, + res->start - offset,resource_size (res), res->flags, j) ==0 ) {@@ -279,7 +280,7 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,/* If the resource PCI address is 0 then we have our * ISA memory hole */ -if (res->start == hose->pci_mem_offset) +if (res->start == offset) found_isa_hole =1 ; } }@@ -457,6 +458,7 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,/* Setup outbound memory windows */ for (i = j =0 ; i <3 ; i++) {struct resource *res = &hose->mem_resources[i]; +resource_size_t offset = hose->mem_offset[i];/* we only care about memory windows */ if (!(res->flags &IORESOURCE_MEM ))@@ -470,7 +472,7 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,/* Configure the resource */ if (ppc4xx_setup_one_pcix_POM (hose, reg, res->start, - res->start - hose->pci_mem_offset, + res->start - offset,resource_size (res), res->flags, j) ==0 ) {@@ -479,7 +481,7 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,/* If the resource PCI address is 0 then we have our * ISA memory hole */ -if (res->start == hose->pci_mem_offset) +if (res->start == offset) found_isa_hole =1 ; } }@@ -1792,6 +1794,7 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,/* Setup outbound memory windows */ for (i = j =0 ; i <3 ; i++) {struct resource *res = &hose->mem_resources[i]; +resource_size_t offset = hose->mem_offset[i];/* we only care about memory windows */ if (!(res->flags &IORESOURCE_MEM ))@@ -1805,7 +1808,7 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,/* Configure the resource */ if (ppc4xx_setup_one_pciex_POM (port, hose, mbase, res->start, - res->start - hose->pci_mem_offset, + res->start - offset,resource_size (res), res->flags, j) ==0 ) {@@ -1814,7 +1817,7 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,/* If the resource PCI address is 0 then we have our * ISA memory hole */ -if (res->start == hose->pci_mem_offset) +if (res->start == offset) found_isa_hole =1 ; } }
DQoNCj4gLS0tLS1PcmlnaW5hbCBNZXNzYWdlLS0tLS0NCj4gRnJvbTogQmVuamFtaW4gSGVycmVu c2NobWlkdCBbbWFpbHRvOmJlbmhAa2VybmVsLmNyYXNoaW5nLm9yZ10NCj4gU2VudDogTW9uZGF5 LCBNYXkgMDYsIDIwMTMgMTI6MjAgUE0NCj4gVG86IGxpbnV4cHBjLWRldg0KPiBDYzogS3VtYXIg R2FsYTsgV29vZCBTY290dC1CMDc0MjE7IFNldGhpIFZhcnVuLUIxNjM5NTsgVGhvbWFzIFBldGF6 em9uaTsNCj4gQW5kcmV3IE11cnJheTsgQmpvcm4gSGVsZ2FhczsgbGludXgtcGNpQHZnZXIua2Vy bmVsLm9yZw0KPiBTdWJqZWN0OiBbUEFUQ0hdIHBvd2VycGMvcGNpOiBTdXBwb3J0IHBlci1hcGVy dHVyZSBtZW1vcnkgb2Zmc2V0DQo+IA0KPiBUaGUgUENJIGNvcmUgc3VwcG9ydHMgYW4gb2Zmc2V0 IHBlciBhcGVydHVyZSBub3dhZGF5cyBidXQgb3VyIGFyY2ggY29kZQ0KPiBzdGlsbCBoYXMgYSBz aW5nbGUgb2Zmc2V0IHBlciBob3N0IGJyaWRnZSByZXByZXNlbnRpbmcgdGhlIGRpZmZlcmVuY2UN Cj4gYmV0d2VuIENQVSBtZW1vcnkgYWRkcmVzc2VzIGFuZCBQQ0kgTU1JTyBhZGRyZXNzZXMuDQo+ IA0KPiBUaGlzIGlzIGEgcHJvYmxlbSBhcyBuZXcgbWFjaGluZXMgYW5kIGh5cGVydmlzb3IgdmVy c2lvbnMgYXJlIGNvbWluZyBvdXQNCj4gd2hlcmUgdGhlIDY0LWJpdCB3aW5kb3dzIHdpbGwgaGF2 ZSBhIGRpZmZlcmVudCBvZmZzZXQgKGJhc2ljYWxseSBtYXBwZWQNCj4gMToxKSBmcm9tIHRoZSAz Mi1iaXQgd2luZG93cy4NCj4gDQo+IFRoaXMgZml4ZXMgaXQgYnkgdXNpbmcgc2VwYXJhdGUgb2Zm c2V0cy4gSW4gdGhlIGxvbmcgcnVuLCB3ZSBwcm9iYWJseQ0KPiB3YW50IHRvIGdldCByaWQgb2Yg dGhhdCBpbnRlcm1lZGlhcnkgc3RydWN0IHBjaV9jb250cm9sbGVyIGFuZCBoYXZlIHRob3NlDQo+ IGRpcmVjdGx5IHN0b3JlZCBpbnRvIHRoZSBwY2lfaG9zdF9icmlkZ2UgYXMgdGhleSBhcmUgcGFy c2VkIGJ1dCB0aGlzIHdpbGwNCj4gYmUgYSBtb3JlIGludmFzaXZlIGNoYW5nZS4NCj4gDQo+IFNp Z25lZC1vZmYtYnk6IEJlbmphbWluIEhlcnJlbnNjaG1pZHQgPGJlbmhAa2VybmVsLmNyYXNoaW5n Lm9yZz4NCj4gLS0tDQo+IA0KPiBOb3csIHRoaXMgaXMgYSBiaWcgb25lIGJ1dCBJJ2QgbGlrZSB0 byBzdGlsbCBtZXJnZSBpdCBmb3IgMy4xMCBiZWNhdXNlDQo+IHdlJ3JlIGhhdmluZyBuZXcgbWFj aGluZSBjb21pbmcgdXAgKGFuZCBuZXcgdmVyc2lvbnMgb2YgcEh5cCBvbiBleGlzdGluZw0KPiBt YWNoaW5lcykgdGhhdCBhcmUgZ29pbmcgdG8gZXhwb3NlIE1NSU8gd2luZG93cyB3aXRoIGRpZmZl cmVudCBvZmZzZXRzDQo+IChiYXNpY2FsbHkgb3VyIDY0LWJpdCB3aW5kb3dzIGFyZSAxOjEgYW5k IG91ciAzMi1iaXQgd2luZG93cyByZW1hcHBlZCkuDQo+IA0KPiBJJ20gbm90IGV4cGVjdGluZyBh bnkgbWFqb3IgaXNzdWUgd2l0aCB0aGUgcGF0Y2gsIEkndmUgdGVzdGVkIGl0IG9uIHNvbWUNCj4g b2Ygb3VyIG1hY2hpbmVzIGhlcmUgYW5kIHdpbGwgdGVzdCBpdCBtb3JlIGR1cmluZyB0aGUgbmV4 dCBjb3VwbGUgb2YgZGF5cw0KPiB0aGUgbm90YWJsZSB0aGluZyBpcyB0aGUgcmVtb3ZhbCBvZiBh ICJ3b3JrYXJvdW5kIiAvIGZhbGxiYWNrIG9uIDMyLWJpdA0KPiB0aGF0IEkgc3VzcGVjdCBvbmx5 IGV2ZXIgbWF0dGVyZWQgZm9yIG1hY2hpbmVzIGxvbmcgdW5zdXBwb3J0ZWQgKFBSZVAgPykNCj4g YXMgSSBkb24ndCB0aGluayB3ZSBoYXZlIGFueXRoaW5nIHRoYXQgZG9lc24ndCBwb3B1bGF0ZSB0 aGUgYnJpZGdlDQo+IHJlc291cmNlcyBhbmQgZXhwZWN0cyB0byB3b3JrIG5vd2FkYXlzIChvdGhl ciBzdHVmZiB3b3VsZCBicmVhayBhbnl3YXkpLg0KPiANCj4gVGhpcyBpcyBhbHNvIHdoeSBJJ20g TkFLJ2luZyB0aGUgcGF0Y2ggbWFraW5nDQo+IHBjaV9wcm9jZXNzX2JyaWRnZV9PRl9yYW5nZXMo KSBnZW5lcmljIHNpbmNlIEkgbmVlZCB0byBjaGFuZ2UgaXQgZm9yDQo+IHBvd2VycGMgYW5kIHRo aXMgaXNuJ3QgdGhlIHJpZ2h0IGxvbmcgdGVybSBhcHByb2FjaCAod2Ugc2hvdWxkICJtZXJnZSIN Cj4gcGNpX2NvbnRyb2xsZXIgJiBwY2lfaG9zdF9icmlkZ2UgaW5zdGVhZCBhbmQgZGlyZWN0bHkg cG9wdWxhdGUgdGhlDQo+IHBjaV9ob3N0X2JyaWRnZSBhcGVydHVyZXMpLg0KPiANCj4gSWYgSSBz ZWUgbm8gbWFqb3IgaXNzdWUgd2l0aCB0aGUgcGF0Y2ggZHVyaW5nIHRoZSBuZXh0IGZldyBkYXlz LCBJJ2xsDQo+IHNlbmQgaXQgdG8gTGludXMgd2l0aCBteSBuZXh0IHB1bGwgcmVxdWVzdCwgcHJv YmFibHkgYXQgLXJjMS4NCj4gDQo+IEt1bWFyLCBTY290dCwgU2V0aGksIHBsZWFzZSB0ZXN0IG9u IEZTTCBIVy4gSSdsbCB0YWtlIGNhcmUgb2YgbWFjcyBhbmQNCj4gNHh4IGluIGFkZGl0aW9uIHRv IHRoZSB2YXJpb3VzIElCTSBwcGM2NCBwbGF0Zm9ybXMuDQo+IA0KW1NldGhpIFZhcnVuLUIxNjM5 NV0gVGVzdGVkIHBhdGNoIG9uIEZTTCBUNDI0MCwgUDQwODAsIFA1MDQwIGFuZCBQMTAyMCBib2Fy ZHMuDQoNCi1WYXJ1bg0K
Quoted 2 lines · On Thu, 2013-05-09 at 13:47 +0000, Sethi Varun-B16395 wrote:
[Sethi Varun-B16395] Tested patch on FSL T4240, P4080, P5040 and P1020 boards.
Thanks.
Cheers,
Ben.