Skip to contentSkip to conversation

usbnet: allow status interrupt URB to always be active

PATCH RESEND In review Dan Williams 4 participants 5 messages May 6, 2013 – May 8, 2013 2 messages not in the archive

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

PATCH RESEND v6 1/2 usbnet: allow status interrupt URB to always be active

Some drivers (sierra_net) need the status interrupt URB active even when the device is closed, because they receive custom indications from firmware. Add functions to refcount the status interrupt URB submit/kill operation so that sub-drivers and the generic driver don't fight over whether the status interrupt URB is active or not.

A sub-driver can call usbnet_status_start() at any time, but the URB is only submitted the first time the function is called. Likewise, when the sub-driver is done with the URB, it calls usbnet_status_stop() but the URB is only killed when all users have stopped it. The URB is still killed and re-submitted for suspend/resume, as before, with the same refcount it had at suspend.

---
NOTE: Oliver already ACK-ed this series, but Ming disagreed about the mem_flags argument to usbnet_status_start() and consensus seems far away; given that it's not userspace API/ABI, I'd like to see the series go in.

 drivers/net/usb/usbnet.c   | 77 ++++++++++++++++++++++++++++++++++++++++++----
 include/linux/usb/usbnet.h |  5 +++
 2 files changed, 76 insertions(+), 6 deletions(-)
drivers/net/usb/usbnet.c +71 -6
index 1e5a9b7..f95cb03 100644
@@ -252,6 +252,70 @@ static int init_status (struct usbnet *dev, struct usb_interface *intf)
 	return 0;
 }
 
+/* Submit the interrupt URB if not previously submitted, increasing refcount */
+int usbnet_status_start(struct usbnet *dev, gfp_t mem_flags)
+{
+	int ret = 0;
+
+	WARN_ON_ONCE(dev->interrupt == NULL);
+	if (dev->interrupt) {
+		mutex_lock(&dev->interrupt_mutex);
+
+		if (++dev->interrupt_count == 1)
+			ret = usb_submit_urb(dev->interrupt, mem_flags);
+
+		dev_dbg(&dev->udev->dev, "incremented interrupt URB count to %d\n",
+			dev->interrupt_count);
+		mutex_unlock(&dev->interrupt_mutex);
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usbnet_status_start);
+
+/* For resume; submit interrupt URB if previously submitted */
+static int __usbnet_status_start_force(struct usbnet *dev, gfp_t mem_flags)
+{
+	int ret = 0;
+
+	mutex_lock(&dev->interrupt_mutex);
+	if (dev->interrupt_count) {
+		ret = usb_submit_urb(dev->interrupt, mem_flags);
+		dev_dbg(&dev->udev->dev,
+			"submitted interrupt URB for resume\n");
+	}
+	mutex_unlock(&dev->interrupt_mutex);
+	return ret;
+}
+
+/* Kill the interrupt URB if all submitters want it killed */
+void usbnet_status_stop(struct usbnet *dev)
+{
+	if (dev->interrupt) {
+		mutex_lock(&dev->interrupt_mutex);
+		WARN_ON(dev->interrupt_count == 0);
+
+		if (dev->interrupt_count && --dev->interrupt_count == 0)
+			usb_kill_urb(dev->interrupt);
+
+		dev_dbg(&dev->udev->dev,
+			"decremented interrupt URB count to %d\n",
+			dev->interrupt_count);
+		mutex_unlock(&dev->interrupt_mutex);
+	}
+}
+EXPORT_SYMBOL_GPL(usbnet_status_stop);
+
+/* For suspend; always kill interrupt URB */
+static void __usbnet_status_stop_force(struct usbnet *dev)
+{
+	if (dev->interrupt) {
+		mutex_lock(&dev->interrupt_mutex);
+		usb_kill_urb(dev->interrupt);
+		dev_dbg(&dev->udev->dev, "killed interrupt URB for suspend\n");
+		mutex_unlock(&dev->interrupt_mutex);
+	}
+}
+
 /* Passes this packet up the stack, updating its accounting.
  * Some link protocols batch packets, so their rx_fixup paths
  * can return clones as well as just modify the original skb.
@@ -725,7 +789,7 @@ int usbnet_stop (struct net_device *net)
 	if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
 		usbnet_terminate_urbs(dev);
 
-	usb_kill_urb(dev->interrupt);
+	usbnet_status_stop(dev);
 
 	usbnet_purge_paused_rxq(dev);
 
@@ -787,7 +851,7 @@ int usbnet_open (struct net_device *net)
 
 	/* start any status interrupt transfer */
 	if (dev->interrupt) {
-		retval = usb_submit_urb (dev->interrupt, GFP_KERNEL);
+		retval = usbnet_status_start(dev, GFP_KERNEL);
 		if (retval < 0) {
 			netif_err(dev, ifup, dev->net,
 				  "intr submit %d\n", retval);
@@ -1458,6 +1522,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	dev->delay.data = (unsigned long) dev;
 	init_timer (&dev->delay);
 	mutex_init (&dev->phy_mutex);
+	mutex_init(&dev->interrupt_mutex);
+	dev->interrupt_count = 0;
 
 	dev->net = net;
 	strcpy (net->name, "usb%d");
@@ -1593,7 +1659,7 @@ int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
 		 */
 		netif_device_detach (dev->net);
 		usbnet_terminate_urbs(dev);
-		usb_kill_urb(dev->interrupt);
+		__usbnet_status_stop_force(dev);
 
 		/*
 		 * reattach so runtime management can use and
@@ -1613,9 +1679,8 @@ int usbnet_resume (struct usb_interface *intf)
 	int                     retval;
 
 	if (!--dev->suspend_count) {
-		/* resume interrupt URBs */
-		if (dev->interrupt && test_bit(EVENT_DEV_OPEN, &dev->flags))
-			usb_submit_urb(dev->interrupt, GFP_NOIO);
+		/* resume interrupt URB if it was previously submitted */
+		__usbnet_status_start_force(dev, GFP_NOIO);
 
 		spin_lock_irq(&dev->txq.lock);
 		while ((res = usb_get_from_anchor(&dev->deferred))) {
include/linux/usb/usbnet.h +5 -0
index da46327..3af84ec 100644
@@ -56,6 +56,8 @@ struct usbnet {
 	struct sk_buff_head	done;
 	struct sk_buff_head	rxq_pause;
 	struct urb		*interrupt;
+	unsigned		interrupt_count;
+	struct mutex		interrupt_mutex;
 	struct usb_anchor	deferred;
 	struct tasklet_struct	bh;
 
@@ -248,4 +250,7 @@ extern int usbnet_nway_reset(struct net_device *net);
 extern int usbnet_manage_power(struct usbnet *, int);
 extern void usbnet_link_change(struct usbnet *, bool, bool);
 
+extern int usbnet_status_start(struct usbnet *dev, gfp_t mem_flags);
+extern void usbnet_status_stop(struct usbnet *dev);
+
 #endif /* __LINUX_USB_USBNET_H */
Signature · 7 lines
1.8.1.4


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#1 lore raw

PATCH RESEND v6 2/2 sierra_net: keep status interrupt URB active

The driver and firmware sync up through SYNC messages, and the firmware's affirmative reply to these SYNC messages appears to be the "Reset" indication received via the status interrupt endpoint. Thus the driver needs the status interrupt endpoint always active so that the Reset indication can be received even if the netdev is closed, which is the case right after device insertion.

If the Reset indication is not received by the driver, it continues sending SYNC messages to the firmware, which crashes about 10 seconds later and the device stops responding.

---
 drivers/net/usb/sierra_net.c | 38 +++++++++++++++++++++++++++++++-------
 1 file changed, 31 insertions(+), 7 deletions(-)
drivers/net/usb/sierra_net.c +31 -7
index a923d61..a79e9d3 100644
@@ -426,6 +426,13 @@ static void sierra_net_dosync(struct usbnet *dev)
 
 	dev_dbg(&dev->udev->dev, "%s", __func__);
 
+	/* The SIERRA_NET_HIP_MSYNC_ID command appears to request that the
+	 * firmware restart itself.  After restarting, the modem will respond
+	 * with the SIERRA_NET_HIP_RESTART_ID indication.  The driver continues
+	 * sending MSYNC commands every few seconds until it receives the
+	 * RESTART event from the firmware
+	 */
+
 	/* tell modem we are ready */
 	status = sierra_net_send_sync(dev);
 	if (status < 0)
@@ -704,6 +711,9 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
 	/* set context index initially to 0 - prepares tx hdr template */
 	sierra_net_set_ctx_index(priv, 0);
 
+	/* prepare sync message template */
+	memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg));
+
 	/* decrease the rx_urb_size and max_tx_size to 4k on USB 1.1 */
 	dev->rx_urb_size  = SIERRA_NET_RX_URB_SIZE;
 	if (dev->udev->speed != USB_SPEED_HIGH)
@@ -739,11 +749,6 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
 		kfree(priv);
 		return -ENODEV;
 	}
-	/* prepare sync message from template */
-	memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg));
-
-	/* initiate the sync sequence */
-	sierra_net_dosync(dev);
 
 	return 0;
 }
@@ -766,8 +771,9 @@ static void sierra_net_unbind(struct usbnet *dev, struct usb_interface *intf)
 		netdev_err(dev->net,
 			"usb_control_msg failed, status %d\n", status);
 
-	sierra_net_set_private(dev, NULL);
+	usbnet_status_stop(dev);
 
+	sierra_net_set_private(dev, NULL);
 	kfree(priv);
 }
 
@@ -908,6 +914,24 @@ static const struct driver_info sierra_net_info_direct_ip = {
 	.tx_fixup = sierra_net_tx_fixup,
 };
 
+static int
+sierra_net_probe(struct usb_interface *udev, const struct usb_device_id *prod)
+{
+	int ret;
+
+	ret = usbnet_probe(udev, prod);
+	if (ret == 0) {
+		struct usbnet *dev = usb_get_intfdata(udev);
+
+		ret = usbnet_status_start(dev, GFP_KERNEL);
+		if (ret == 0) {
+			/* Interrupt URB now set up; initiate sync sequence */
+			sierra_net_dosync(dev);
+		}
+	}
+	return ret;
+}
+
 #define DIRECT_IP_DEVICE(vend, prod) \
 	{USB_DEVICE_INTERFACE_NUMBER(vend, prod, 7), \
 	.driver_info = (unsigned long)&sierra_net_info_direct_ip}, \
@@ -930,7 +954,7 @@ MODULE_DEVICE_TABLE(usb, products);
 static struct usb_driver sierra_net_driver = {
 	.name = "sierra_net",
 	.id_table = products,
-	.probe = usbnet_probe,
+	.probe = sierra_net_probe,
 	.disconnect = usbnet_disconnect,
 	.suspend = usbnet_suspend,
 	.resume = usbnet_resume,
Signature · 1 line
1.8.1.4

A message that is not in the archive (sent off-list or not yet received): 1367876096.31762.14.camel-wKZy7rqYPVb5EHUCmHmTqw@public.gmane.org

#3 lore raw

Re: [PATCH 2/2 v6 RESEND] sierra_net: keep status interrupt URB active

From: Dan Williams <[email protected]>
Date: Mon, 06 May 2013 16:34:56 -0500

Quoted 7 lines

The driver and firmware sync up through SYNC messages, and the firmware's affirmative reply to these SYNC messages appears to be the "Reset" indication received via the status interrupt endpoint. Thus the driver needs the status interrupt endpoint always active so that the Reset indication can be received even if the netdev is closed, which is the case right after device insertion.

Quoted 5 lines

If the Reset indication is not received by the driver, it continues sending SYNC messages to the firmware, which crashes about 10 seconds later and the device stops responding.

Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

Acked-by on v6 1/2
#4 lore raw
In reply to Dan Williams
Quoted 15 lines · On Monday 06 May 2013 16:29:23 Dan Williams wrote:

Some drivers (sierra_net) need the status interrupt URB active even when the device is closed, because they receive custom indications from firmware. Add functions to refcount the status interrupt URB submit/kill operation so that sub-drivers and the generic driver don't fight over whether the status interrupt URB is active or not.

A sub-driver can call usbnet_status_start() at any time, but the URB is only submitted the first time the function is called. Likewise, when the sub-driver is done with the URB, it calls usbnet_status_stop() but the URB is only killed when all users have stopped it. The URB is still killed and re-submitted for suspend/resume, as before, with the same refcount it had at suspend.

Quoted 1 line

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw

From: Dan Williams <[email protected]>
Date: Mon, 06 May 2013 16:29:23 -0500

Quoted 15 lines

Some drivers (sierra_net) need the status interrupt URB active even when the device is closed, because they receive custom indications from firmware. Add functions to refcount the status interrupt URB submit/kill operation so that sub-drivers and the generic driver don't fight over whether the status interrupt URB is active or not.

A sub-driver can call usbnet_status_start() at any time, but the URB is only submitted the first time the function is called. Likewise, when the sub-driver is done with the URB, it calls usbnet_status_stop() but the URB is only killed when all users have stopped it. The URB is still killed and re-submitted for suspend/resume, as before, with the same refcount it had at suspend.

Quoted 1 line

Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html