syslinux: Update to 4.06

| gcc -isystem /srv/ssd/sgw/machines/fri2/tmp/sysroots/x86_64-linux/usr/include -O2 -o isohybrid isohybrid.o isohdpfx.o -luuid | /usr/bin/ld: cannot find -luuid

Patches are now part of upstream or no longer needed. Added new util-linux dependency for isohybrid. Paths updated to reflect directory structure changes.

INCDIR isn't used by the build process during compilation which results in the compiler not finding uuid/uuid.h from util-linux when compiling isohybrid unless it exists on the host system. This was fixed by adding -isystem ${STAGING_INCDIR} to CC when calling make.

[YOCTO #4438]

Signed-off-by Jonathan Liu <[email protected]>

---
  meta/classes/boot-directdisk.bbclass               |   2 +-
  .../syslinux/files/cross-build.patch               |  71 --
  .../libinstaller-Avoid-using-linux-ext2_fs.h.patch | 975 ---------------------
  .../recipes-devtools/syslinux/files/no-strip.patch |  31 -
  meta/recipes-devtools/syslinux/syslinux_4.03.bb    |  65 --
  meta/recipes-devtools/syslinux/syslinux_4.06.bb    |  62 ++
  6 files changed, 63 insertions(+), 1143 deletions(-)

delete mode 100644 meta/recipes-devtools/syslinux/files/cross-build.patch
delete mode 100644 meta/recipes-devtools/syslinux/files/libinstaller-Avoid-using-linux-ext2_fs.h.patch delete mode 100644 meta/recipes-devtools/syslinux/files/no-strip.patch
delete mode 100644 meta/recipes-devtools/syslinux/syslinux_4.03.bb
create mode 100644 meta/recipes-devtools/syslinux/syslinux_4.06.bb

meta/classes/boot-directdisk.bbclass +1 -1

index d265485..1506b42 100644
@@ -82,7 +82,7 @@ build_boot_dd() {
  	parted $IMAGE print
 
  	OFFSET=`expr $END2 / 512`
-	dd if=${STAGING_LIBDIR}/syslinux/mbr.bin of=$IMAGE conv=notrunc
+	dd if=${STAGING_DATADIR}/syslinux/mbr.bin of=$IMAGE conv=notrunc
  	dd if=${HDDIMG} of=$IMAGE conv=notrunc seek=1 bs=512
  	dd if=${ROOTFS} of=$IMAGE conv=notrunc seek=$OFFSET bs=512
 

meta/recipes-devtools/syslinux/files/cross-build.patch deleted +0 -71

deleted file mode 100644
index 7bb6bda..0000000
@@ -1,71 +0,0 @@
-Upstream-Status: Inappropriate [configuration]
-
-Use ?= for Makefile variables to use poky environment variables.
-Original method to sed s/CC =/CC ?=/ is not applicable anymore
-because of the Makefile changes.
-
-against 3.86
-
-06/28/2010 - qhe
-
-also AUXDIR stays in $(LIBDIR)/syslinux rather than $(DATADIR)/syslinux
-
-07/08/2010 - qhe
-
-updated for 4.03
-
-11/16/2010 - Qing He <[email protected]>
-
----
-diff --git a/MCONFIG b/MCONFIG
-index e9c16d3..4d49f33 100644
---- a/MCONFIG
-+++ b/MCONFIG
-@@ -18,13 +18,13 @@
- MAKEFLAGS += -r
- MAKE      += -r
-
--BINDIR   = /usr/bin
--SBINDIR  = /sbin
--LIBDIR   = /usr/lib
--DATADIR  = /usr/share
--AUXDIR   = $(DATADIR)/syslinux
--MANDIR	 = /usr/man
--INCDIR   = /usr/include
-+BINDIR   ?= /usr/bin
-+SBINDIR  ?= /sbin
-+LIBDIR   ?= /usr/lib
-+DATADIR  ?= /usr/share
-+AUXDIR   = $(LIBDIR)/syslinux
-+MANDIR	 ?= /usr/man
-+INCDIR   ?= /usr/include
- TFTPBOOT = /tftpboot
- COM32DIR = $(AUXDIR)/com32
-
-@@ -38,18 +38,18 @@ PERL	 = perl
-
- CHMOD	 = chmod
-
--CC	 = gcc
-+CC	 ?= gcc
- gcc_ok   = $(shell tmpf=gcc_ok.$$$$.tmp; \
- 		   if $(CC) $(GCCOPT) $(1) -c $(topdir)/dummy.c \
- 			-o $$tmpf 2>/dev/null ; \
- 		   then echo '$(1)'; else echo '$(2)'; fi; \
- 		   rm -f $$tmpf)
-
--LD	 = ld
--OBJDUMP	 = objdump
--OBJCOPY  = objcopy
--AR       = ar
--NM       = nm
--RANLIB   = ranlib
-+LD	 ?= ld
-+OBJDUMP	 ?= objdump
-+OBJCOPY  ?= objcopy
-+AR       ?= ar
-+NM       ?= nm
-+RANLIB   ?= ranlib
- GZIPPROG = gzip
- PNGTOPNM = pngtopnm
- MCOPY    = mcopy

meta/recipes-devtools/syslinux/files/libinstaller-Avoid-using-linux-ext2_fs.h.patch deleted +0 -975

deleted file mode 100644
index 77d7a5d..0000000
@@ -1,975 +0,0 @@
-From a1006762fa6f98750bb77d76dd992cb8ea9f9c99 Mon Sep 17 00:00:00 2001
-Message-Id: <a1006762fa6f98750bb77d76dd992cb8ea9f9c99.1333550572.git.dvhart@linux.intel.com>
-From: "H. Peter Anvin" <[email protected]>
-Date: Mon, 26 Mar 2012 22:51:09 -0700
-Subject: [PATCH] libinstaller: Avoid using <linux/ext2_fs.h>
-
-Don't use <linux/ext2_fs.h> if we can avoid it.
-
-Upstream-Status: Available in syslinux-4.06-pre3
-
-The ioctl constants have been globalized and moved to <linux/fs.h>.
-Use a private copy of ext2_fs.h from e2fsprogs with the ioctl
-constants removed for the data structures.
-
-Do at least attempt backward compatibility for old kernel headers, but
-no real hope of proper operation there...
-
-Signed-off-by: H. Peter Anvin <[email protected]>
-
-Massaged into 4.03.
-
-Integrated-by: Darren Hart <[email protected]>
----
- libinstaller/ext2fs/ext2_fs.h |  856 +++++++++++++++++++++++++++++++++++++++++
- libinstaller/linuxioctl.h     |   29 ++-
- libinstaller/syslxcom.c       |   12 +-
- 3 files changed, 886 insertions(+), 11 deletions(-)
- create mode 100644 libinstaller/ext2fs/ext2_fs.h
-
-Index: syslinux-4.03/libinstaller/ext2fs/ext2_fs.h
-===================================================================
---- /dev/null
-+++ syslinux-4.03/libinstaller/ext2fs/ext2_fs.h
-@@ -0,0 +1,856 @@
-+/*
-+ *  linux/include/linux/ext2_fs.h
-+ *
-+ * Copyright (C) 1992, 1993, 1994, 1995
-+ * Remy Card ([email protected])
-+ * Laboratoire MASI - Institut Blaise Pascal
-+ * Universite Pierre et Marie Curie (Paris VI)
-+ *
-+ *  from
-+ *
-+ *  linux/include/linux/minix_fs.h
-+ *
-+ *  Copyright (C) 1991, 1992  Linus Torvalds
-+ */
-+
-+#ifndef _EXT2FS_EXT2_FS_H
-+#define _EXT2FS_EXT2_FS_H
-+
-+#include <linux/types.h>
-+
-+/*
-+ * The second extended filesystem constants/structures
-+ */
-+
-+/*
-+ * Define EXT2FS_DEBUG to produce debug messages
-+ */
-+#undef EXT2FS_DEBUG
-+
-+/*
-+ * Define EXT2_PREALLOCATE to preallocate data blocks for expanding files
-+ */
-+#define EXT2_PREALLOCATE
-+#define EXT2_DEFAULT_PREALLOC_BLOCKS	8
-+
-+/*
-+ * The second extended file system version
-+ */
-+#define EXT2FS_DATE		"95/08/09"
-+#define EXT2FS_VERSION		"0.5b"
-+
-+/*
-+ * Special inode numbers
-+ */
-+#define EXT2_BAD_INO		 1	/* Bad blocks inode */
-+#define EXT2_ROOT_INO		 2	/* Root inode */
-+#define EXT4_USR_QUOTA_INO	 3	/* User quota inode */
-+#define EXT4_GRP_QUOTA_INO	 4	/* Group quota inode */
-+#define EXT2_BOOT_LOADER_INO	 5	/* Boot loader inode */
-+#define EXT2_UNDEL_DIR_INO	 6	/* Undelete directory inode */
-+#define EXT2_RESIZE_INO		 7	/* Reserved group descriptors inode */
-+#define EXT2_JOURNAL_INO	 8	/* Journal inode */
-+#define EXT2_EXCLUDE_INO	 9	/* The "exclude" inode, for snapshots */
-+#define EXT4_REPLICA_INO	10	/* Used by non-upstream feature */
-+
-+/* First non-reserved inode for old ext2 filesystems */
-+#define EXT2_GOOD_OLD_FIRST_INO	11
-+
-+/*
-+ * The second extended file system magic number
-+ */
-+#define EXT2_SUPER_MAGIC	0xEF53
-+
-+#ifdef __KERNEL__
-+#define EXT2_SB(sb)	(&((sb)->u.ext2_sb))
-+#else
-+/* Assume that user mode programs are passing in an ext2fs superblock, not
-+ * a kernel struct super_block.  This will allow us to call the feature-test
-+ * macros from user land. */
-+#define EXT2_SB(sb)	(sb)
-+#endif
-+
-+/*
-+ * Maximal count of links to a file
-+ */
-+#define EXT2_LINK_MAX		65000
-+
-+/*
-+ * Macro-instructions used to manage several block sizes
-+ */
-+#define EXT2_MIN_BLOCK_LOG_SIZE		10	/* 1024 */
-+#define EXT2_MAX_BLOCK_LOG_SIZE		16	/* 65536 */
-+#define EXT2_MIN_BLOCK_SIZE	(1 << EXT2_MIN_BLOCK_LOG_SIZE)
-+#define EXT2_MAX_BLOCK_SIZE	(1 << EXT2_MAX_BLOCK_LOG_SIZE)
-+#ifdef __KERNEL__
-+#define EXT2_BLOCK_SIZE(s)	((s)->s_blocksize)
-+#define EXT2_BLOCK_SIZE_BITS(s)	((s)->s_blocksize_bits)
-+#define EXT2_ADDR_PER_BLOCK_BITS(s)	(EXT2_SB(s)->addr_per_block_bits)
-+#define EXT2_INODE_SIZE(s)	(EXT2_SB(s)->s_inode_size)
-+#define EXT2_FIRST_INO(s)	(EXT2_SB(s)->s_first_ino)
-+#else
-+#define EXT2_BLOCK_SIZE(s)	(EXT2_MIN_BLOCK_SIZE << (s)->s_log_block_size)
-+#define EXT2_BLOCK_SIZE_BITS(s)	((s)->s_log_block_size + 10)
-+#define EXT2_INODE_SIZE(s)	(((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
-+				 EXT2_GOOD_OLD_INODE_SIZE : (s)->s_inode_size)
-+#define EXT2_FIRST_INO(s)	(((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
-+				 EXT2_GOOD_OLD_FIRST_INO : (s)->s_first_ino)
-+#endif
-+#define EXT2_ADDR_PER_BLOCK(s)	(EXT2_BLOCK_SIZE(s) / sizeof(__u32))
-+
-+/*
-+ * Macro-instructions used to manage allocation clusters
-+ */
-+#define EXT2_MIN_CLUSTER_LOG_SIZE	EXT2_MIN_BLOCK_LOG_SIZE
-+#define EXT2_MAX_CLUSTER_LOG_SIZE	29	/* 512MB  */
-+#define EXT2_MIN_CLUSTER_SIZE		EXT2_MIN_BLOCK_SIZE
-+#define EXT2_MAX_CLUSTER_SIZE		(1 << EXT2_MAX_CLUSTER_LOG_SIZE)
-+#define EXT2_CLUSTER_SIZE(s)		(EXT2_MIN_BLOCK_SIZE << \
-+						(s)->s_log_cluster_size)
-+#define EXT2_CLUSTER_SIZE_BITS(s)	((s)->s_log_cluster_size + 10)
-+
-+/*
-+ * Macro-instructions used to manage fragments
-+ *
-+ * Note: for backwards compatibility only, for the dump program.
-+ * Ext2/3/4 will never support fragments....
-+ */
-+#define EXT2_MIN_FRAG_SIZE              EXT2_MIN_BLOCK_SIZE
-+#define EXT2_MAX_FRAG_SIZE              EXT2_MAX_BLOCK_SIZE
-+#define EXT2_MIN_FRAG_LOG_SIZE          EXT2_MIN_BLOCK_LOG_SIZE
-+#define EXT2_FRAG_SIZE(s)		EXT2_BLOCK_SIZE(s)
-+#define EXT2_FRAGS_PER_BLOCK(s)		1
-+
-+/*
-+ * ACL structures
-+ */
-+struct ext2_acl_header	/* Header of Access Control Lists */
-+{
-+	__u32	aclh_size;
-+	__u32	aclh_file_count;
-+	__u32	aclh_acle_count;
-+	__u32	aclh_first_acle;
-+};
-+
-+struct ext2_acl_entry	/* Access Control List Entry */
-+{
-+	__u32	acle_size;
-+	__u16	acle_perms;	/* Access permissions */
-+	__u16	acle_type;	/* Type of entry */
-+	__u16	acle_tag;	/* User or group identity */
-+	__u16	acle_pad1;
-+	__u32	acle_next;	/* Pointer on next entry for the */
-+					/* same inode or on next free entry */
-+};
-+
-+/*
-+ * Structure of a blocks group descriptor
-+ */
-+struct ext2_group_desc
-+{
-+	__u32	bg_block_bitmap;	/* Blocks bitmap block */
-+	__u32	bg_inode_bitmap;	/* Inodes bitmap block */
-+	__u32	bg_inode_table;		/* Inodes table block */
-+	__u16	bg_free_blocks_count;	/* Free blocks count */
-+	__u16	bg_free_inodes_count;	/* Free inodes count */
-+	__u16	bg_used_dirs_count;	/* Directories count */
-+	__u16	bg_flags;
-+	__u32	bg_exclude_bitmap_lo;	/* Exclude bitmap for snapshots */
-+	__u16	bg_block_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap) LSB */
-+	__u16	bg_inode_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap) LSB */
-+	__u16	bg_itable_unused;	/* Unused inodes count */
-+	__u16	bg_checksum;		/* crc16(s_uuid+grouo_num+group_desc)*/
-+};
-+
-+/*
-+ * Structure of a blocks group descriptor
-+ */
-+struct ext4_group_desc
-+{
-+	__u32	bg_block_bitmap;	/* Blocks bitmap block */
-+	__u32	bg_inode_bitmap;	/* Inodes bitmap block */
-+	__u32	bg_inode_table;		/* Inodes table block */
-+	__u16	bg_free_blocks_count;	/* Free blocks count */
-+	__u16	bg_free_inodes_count;	/* Free inodes count */
-+	__u16	bg_used_dirs_count;	/* Directories count */
-+	__u16	bg_flags;		/* EXT4_BG_flags (INODE_UNINIT, etc) */
-+	__u32	bg_exclude_bitmap_lo;	/* Exclude bitmap for snapshots */
-+	__u16	bg_block_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap) LSB */
-+	__u16	bg_inode_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap) LSB */
-+	__u16	bg_itable_unused;	/* Unused inodes count */
-+	__u16	bg_checksum;		/* crc16(sb_uuid+group+desc) */
-+	__u32	bg_block_bitmap_hi;	/* Blocks bitmap block MSB */
-+	__u32	bg_inode_bitmap_hi;	/* Inodes bitmap block MSB */
-+	__u32	bg_inode_table_hi;	/* Inodes table block MSB */
-+	__u16	bg_free_blocks_count_hi;/* Free blocks count MSB */
-+	__u16	bg_free_inodes_count_hi;/* Free inodes count MSB */
-+	__u16	bg_used_dirs_count_hi;	/* Directories count MSB */
-+	__u16	bg_itable_unused_hi;	/* Unused inodes count MSB */
-+	__u32	bg_exclude_bitmap_hi;	/* Exclude bitmap block MSB */
-+	__u16	bg_block_bitmap_csum_hi;/* crc32c(s_uuid+grp_num+bitmap) MSB */
-+	__u16	bg_inode_bitmap_csum_hi;/* crc32c(s_uuid+grp_num+bitmap) MSB */
-+	__u32	bg_reserved;
-+};
-+
-+#define EXT2_BG_INODE_UNINIT	0x0001 /* Inode table/bitmap not initialized */
-+#define EXT2_BG_BLOCK_UNINIT	0x0002 /* Block bitmap not initialized */
-+#define EXT2_BG_INODE_ZEROED	0x0004 /* On-disk itable initialized to zero */
-+
-+/*
-+ * Data structures used by the directory indexing feature
-+ *
-+ * Note: all of the multibyte integer fields are little endian.
-+ */
-+
-+/*
-+ * Note: dx_root_info is laid out so that if it should somehow get
-+ * overlaid by a dirent the two low bits of the hash version will be
-+ * zero.  Therefore, the hash version mod 4 should never be 0.
-+ * Sincerely, the paranoia department.
-+ */
-+struct ext2_dx_root_info {
-+	__u32 reserved_zero;
-+	__u8 hash_version; /* 0 now, 1 at release */
-+	__u8 info_length; /* 8 */
-+	__u8 indirect_levels;
-+	__u8 unused_flags;
-+};
-+
-+#define EXT2_HASH_LEGACY		0
-+#define EXT2_HASH_HALF_MD4		1
-+#define EXT2_HASH_TEA			2
-+#define EXT2_HASH_LEGACY_UNSIGNED	3 /* reserved for userspace lib */
-+#define EXT2_HASH_HALF_MD4_UNSIGNED	4 /* reserved for userspace lib */
-+#define EXT2_HASH_TEA_UNSIGNED		5 /* reserved for userspace lib */
-+
-+#define EXT2_HASH_FLAG_INCOMPAT	0x1
-+
-+struct ext2_dx_entry {
-+	__u32 hash;
-+	__u32 block;
-+};
-+
-+struct ext2_dx_countlimit {
-+	__u16 limit;
-+	__u16 count;
-+};
-+
-+
-+/*
-+ * Macro-instructions used to manage group descriptors
-+ */
-+#define EXT2_MIN_DESC_SIZE             32
-+#define EXT2_MIN_DESC_SIZE_64BIT       64
-+#define EXT2_MAX_DESC_SIZE             EXT2_MIN_BLOCK_SIZE
-+#define EXT2_DESC_SIZE(s)                                                \
-+       ((EXT2_SB(s)->s_feature_incompat & EXT4_FEATURE_INCOMPAT_64BIT) ? \
-+	(s)->s_desc_size : EXT2_MIN_DESC_SIZE)
-+
-+#define EXT2_BLOCKS_PER_GROUP(s)	(EXT2_SB(s)->s_blocks_per_group)
-+#define EXT2_INODES_PER_GROUP(s)	(EXT2_SB(s)->s_inodes_per_group)
-+#define EXT2_CLUSTERS_PER_GROUP(s)	(EXT2_SB(s)->s_clusters_per_group)
-+#define EXT2_INODES_PER_BLOCK(s)	(EXT2_BLOCK_SIZE(s)/EXT2_INODE_SIZE(s))
-+/* limits imposed by 16-bit value gd_free_{blocks,inode}_count */
-+#define EXT2_MAX_BLOCKS_PER_GROUP(s)	((((unsigned) 1 << 16) - 8) *	\
-+					 (EXT2_CLUSTER_SIZE(s) / \
-+					  EXT2_BLOCK_SIZE(s)))
-+#define EXT2_MAX_CLUSTERS_PER_GROUP(s)	(((unsigned) 1 << 16) - 8)
-+#define EXT2_MAX_INODES_PER_GROUP(s)	(((unsigned) 1 << 16) - \
-+					 EXT2_INODES_PER_BLOCK(s))
-+#ifdef __KERNEL__
-+#define EXT2_DESC_PER_BLOCK(s)		(EXT2_SB(s)->s_desc_per_block)
-+#define EXT2_DESC_PER_BLOCK_BITS(s)	(EXT2_SB(s)->s_desc_per_block_bits)
-+#else
-+#define EXT2_DESC_PER_BLOCK(s)		(EXT2_BLOCK_SIZE(s) / EXT2_DESC_SIZE(s))
-+#endif
-+
-+/*
-+ * Constants relative to the data blocks
-+ */
-+#define EXT2_NDIR_BLOCKS		12
-+#define EXT2_IND_BLOCK			EXT2_NDIR_BLOCKS
-+#define EXT2_DIND_BLOCK			(EXT2_IND_BLOCK + 1)
-+#define EXT2_TIND_BLOCK			(EXT2_DIND_BLOCK + 1)
-+#define EXT2_N_BLOCKS			(EXT2_TIND_BLOCK + 1)
-+
-+/*
-+ * Inode flags
-+ */
-+#define EXT2_SECRM_FL			0x00000001 /* Secure deletion */
-+#define EXT2_UNRM_FL			0x00000002 /* Undelete */
-+#define EXT2_COMPR_FL			0x00000004 /* Compress file */
-+#define EXT2_SYNC_FL			0x00000008 /* Synchronous updates */
-+#define EXT2_IMMUTABLE_FL		0x00000010 /* Immutable file */
-+#define EXT2_APPEND_FL			0x00000020 /* writes to file may only append */
-+#define EXT2_NODUMP_FL			0x00000040 /* do not dump file */
-+#define EXT2_NOATIME_FL			0x00000080 /* do not update atime */
-+/* Reserved for compression usage... */
-+#define EXT2_DIRTY_FL			0x00000100
-+#define EXT2_COMPRBLK_FL		0x00000200 /* One or more compressed clusters */
-+#define EXT2_NOCOMPR_FL			0x00000400 /* Access raw compressed data */
-+#define EXT2_ECOMPR_FL			0x00000800 /* Compression error */
-+/* End compression flags --- maybe not all used */
-+#define EXT2_BTREE_FL			0x00001000 /* btree format dir */
-+#define EXT2_INDEX_FL			0x00001000 /* hash-indexed directory */
-+#define EXT2_IMAGIC_FL			0x00002000
-+#define EXT3_JOURNAL_DATA_FL		0x00004000 /* file data should be journaled */
-+#define EXT2_NOTAIL_FL			0x00008000 /* file tail should not be merged */
-+#define EXT2_DIRSYNC_FL 		0x00010000 /* Synchronous directory modifications */
-+#define EXT2_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
-+#define EXT4_HUGE_FILE_FL               0x00040000 /* Set to each huge file */
-+#define EXT4_EXTENTS_FL 		0x00080000 /* Inode uses extents */
-+#define EXT4_EA_INODE_FL	        0x00200000 /* Inode used for large EA */
-+/* EXT4_EOFBLOCKS_FL 0x00400000 was here */
-+#define EXT4_SNAPFILE_FL		0x01000000  /* Inode is a snapshot */
-+#define EXT4_SNAPFILE_DELETED_FL	0x04000000  /* Snapshot is being deleted */
-+#define EXT4_SNAPFILE_SHRUNK_FL		0x08000000  /* Snapshot shrink has completed */
-+#define EXT2_RESERVED_FL		0x80000000 /* reserved for ext2 lib */
-+
-+#define EXT2_FL_USER_VISIBLE		0x004BDFFF /* User visible flags */
-+#define EXT2_FL_USER_MODIFIABLE		0x004B80FF /* User modifiable flags */
-+
-+/*
-+ * ioctl commands
-+ */
-+
-+/* Used for online resize */
-+struct ext2_new_group_input {
-+	__u32 group;		/* Group number for this data */
-+	__u32 block_bitmap;	/* Absolute block number of block bitmap */
-+	__u32 inode_bitmap;	/* Absolute block number of inode bitmap */
-+	__u32 inode_table;	/* Absolute block number of inode table start */
-+	__u32 blocks_count;	/* Total number of blocks in this group */
-+	__u16 reserved_blocks;	/* Number of reserved blocks in this group */
-+	__u16 unused;		/* Number of reserved GDT blocks in group */
-+};
-+
-+struct ext4_new_group_input {
-+	__u32 group;		/* Group number for this data */
-+	__u64 block_bitmap;	/* Absolute block number of block bitmap */
-+	__u64 inode_bitmap;	/* Absolute block number of inode bitmap */
-+	__u64 inode_table;	/* Absolute block number of inode table start */
-+	__u32 blocks_count;	/* Total number of blocks in this group */
-+	__u16 reserved_blocks;	/* Number of reserved blocks in this group */
-+	__u16 unused;
-+};
-+
-+#ifdef __GNU__			/* Needed for the Hurd */
-+#define _IOT_ext2_new_group_input _IOT (_IOTS(__u32), 5, _IOTS(__u16), 2, 0, 0)
-+#endif
-+
-+#define EXT2_IOC_GETFLAGS		_IOR('f', 1, long)
-+#define EXT2_IOC_SETFLAGS		_IOW('f', 2, long)
-+#define EXT2_IOC_GETVERSION		_IOR('v', 1, long)
-+#define EXT2_IOC_SETVERSION		_IOW('v', 2, long)
-+#define EXT2_IOC_GETVERSION_NEW		_IOR('f', 3, long)
-+#define EXT2_IOC_SETVERSION_NEW		_IOW('f', 4, long)
-+#define EXT2_IOC_GROUP_EXTEND		_IOW('f', 7, unsigned long)
-+#define EXT2_IOC_GROUP_ADD		_IOW('f', 8,struct ext2_new_group_input)
-+#define EXT4_IOC_GROUP_ADD		_IOW('f', 8,struct ext4_new_group_input)
-+#define EXT4_IOC_RESIZE_FS		_IOW('f', 16, __u64)
-+
-+/*
-+ * Structure of an inode on the disk
-+ */
-+struct ext2_inode {
-+	__u16	i_mode;		/* File mode */
-+	__u16	i_uid;		/* Low 16 bits of Owner Uid */
-+	__u32	i_size;		/* Size in bytes */
-+	__u32	i_atime;	/* Access time */
-+	__u32	i_ctime;	/* Inode change time */
-+	__u32	i_mtime;	/* Modification time */
-+	__u32	i_dtime;	/* Deletion Time */
-+	__u16	i_gid;		/* Low 16 bits of Group Id */
-+	__u16	i_links_count;	/* Links count */
-+	__u32	i_blocks;	/* Blocks count */
-+	__u32	i_flags;	/* File flags */
-+	union {
-+		struct {
-+			__u32	l_i_version; /* was l_i_reserved1 */
-+		} linux1;
-+		struct {
-+			__u32  h_i_translator;
-+		} hurd1;
-+	} osd1;				/* OS dependent 1 */
-+	__u32	i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
-+	__u32	i_generation;	/* File version (for NFS) */
-+	__u32	i_file_acl;	/* File ACL */
-+	__u32	i_size_high;	/* Formerly i_dir_acl, directory ACL */
-+	__u32	i_faddr;	/* Fragment address */
-+	union {
-+		struct {
-+			__u16	l_i_blocks_hi;
-+			__u16	l_i_file_acl_high;
-+			__u16	l_i_uid_high;	/* these 2 fields    */
-+			__u16	l_i_gid_high;	/* were reserved2[0] */
-+			__u16	l_i_checksum_lo; /* crc32c(uuid+inum+inode) */
-+			__u16	l_i_reserved;
-+		} linux2;
-+		struct {
-+			__u8	h_i_frag;	/* Fragment number */
-+			__u8	h_i_fsize;	/* Fragment size */
-+			__u16	h_i_mode_high;
-+			__u16	h_i_uid_high;
-+			__u16	h_i_gid_high;
-+			__u32	h_i_author;
-+		} hurd2;
-+	} osd2;				/* OS dependent 2 */
-+};
-+
-+/*
-+ * Permanent part of an large inode on the disk
-+ */
-+struct ext2_inode_large {
-+	__u16	i_mode;		/* File mode */
-+	__u16	i_uid;		/* Low 16 bits of Owner Uid */
-+	__u32	i_size;		/* Size in bytes */
-+	__u32	i_atime;	/* Access time */
-+	__u32	i_ctime;	/* Inode Change time */
-+	__u32	i_mtime;	/* Modification time */
-+	__u32	i_dtime;	/* Deletion Time */
-+	__u16	i_gid;		/* Low 16 bits of Group Id */
-+	__u16	i_links_count;	/* Links count */
-+	__u32	i_blocks;	/* Blocks count */
-+	__u32	i_flags;	/* File flags */
-+	union {
-+		struct {
-+			__u32	l_i_version; /* was l_i_reserved1 */
-+		} linux1;
-+		struct {
-+			__u32  h_i_translator;
-+		} hurd1;
-+	} osd1;				/* OS dependent 1 */
-+	__u32	i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
-+	__u32	i_generation;	/* File version (for NFS) */
-+	__u32	i_file_acl;	/* File ACL */
-+	__u32	i_size_high;	/* Formerly i_dir_acl, directory ACL */
-+	__u32	i_faddr;	/* Fragment address */
-+	union {
-+		struct {
-+			__u16	l_i_blocks_hi;
-+			__u16	l_i_file_acl_high;
-+			__u16	l_i_uid_high;	/* these 2 fields    */
-+			__u16	l_i_gid_high;	/* were reserved2[0] */
-+			__u16	l_i_checksum_lo; /* crc32c(uuid+inum+inode) */
-+			__u16	l_i_reserved;
-+		} linux2;
-+		struct {
-+			__u8	h_i_frag;	/* Fragment number */
-+			__u8	h_i_fsize;	/* Fragment size */
-+			__u16	h_i_mode_high;
-+			__u16	h_i_uid_high;
-+			__u16	h_i_gid_high;
-+			__u32	h_i_author;
-+		} hurd2;
-+	} osd2;				/* OS dependent 2 */
-+	__u16	i_extra_isize;
-+	__u16	i_checksum_hi;	/* crc32c(uuid+inum+inode) */
-+	__u32	i_ctime_extra;	/* extra Change time (nsec << 2 | epoch) */
-+	__u32	i_mtime_extra;	/* extra Modification time (nsec << 2 | epoch) */
-+	__u32	i_atime_extra;	/* extra Access time (nsec << 2 | epoch) */
-+	__u32	i_crtime;	/* File creation time */
-+	__u32	i_crtime_extra;	/* extra File creation time (nsec << 2 | epoch)*/
-+	__u32	i_version_hi;	/* high 32 bits for 64-bit version */
-+};
-+
-+#define i_dir_acl	i_size_high
-+
-+#if defined(__KERNEL__) || defined(__linux__)
-+#define i_reserved1	osd1.linux1.l_i_reserved1
-+#define i_frag		osd2.linux2.l_i_frag
-+#define i_fsize		osd2.linux2.l_i_fsize
-+#define i_uid_low	i_uid
-+#define i_gid_low	i_gid
-+#define i_uid_high	osd2.linux2.l_i_uid_high
-+#define i_gid_high	osd2.linux2.l_i_gid_high
-+#else
-+#if defined(__GNU__)
-+
-+#define i_translator	osd1.hurd1.h_i_translator
-+#define i_frag		osd2.hurd2.h_i_frag;
-+#define i_fsize		osd2.hurd2.h_i_fsize;
-+#define i_uid_high	osd2.hurd2.h_i_uid_high
-+#define i_gid_high	osd2.hurd2.h_i_gid_high
-+#define i_author	osd2.hurd2.h_i_author
-+
-+#endif  /* __GNU__ */
-+#endif	/* defined(__KERNEL__) || defined(__linux__) */
-+
-+#define inode_uid(inode)	((inode).i_uid | (inode).osd2.linux2.l_i_uid_high << 16)
-+#define inode_gid(inode)	((inode).i_gid | (inode).osd2.linux2.l_i_gid_high << 16)
-+#define ext2fs_set_i_uid_high(inode,x) ((inode).osd2.linux2.l_i_uid_high = (x))
-+#define ext2fs_set_i_gid_high(inode,x) ((inode).osd2.linux2.l_i_gid_high = (x))
-+
-+/*
-+ * File system states
-+ */
-+#define EXT2_VALID_FS			0x0001	/* Unmounted cleanly */
-+#define EXT2_ERROR_FS			0x0002	/* Errors detected */
-+#define EXT3_ORPHAN_FS			0x0004	/* Orphans being recovered */
-+
-+/*
-+ * Misc. filesystem flags
-+ */
-+#define EXT2_FLAGS_SIGNED_HASH		0x0001  /* Signed dirhash in use */
-+#define EXT2_FLAGS_UNSIGNED_HASH	0x0002  /* Unsigned dirhash in use */
-+#define EXT2_FLAGS_TEST_FILESYS		0x0004	/* OK for use on development code */
-+#define EXT2_FLAGS_IS_SNAPSHOT		0x0010	/* This is a snapshot image */
-+#define EXT2_FLAGS_FIX_SNAPSHOT		0x0020	/* Snapshot inodes corrupted */
-+#define EXT2_FLAGS_FIX_EXCLUDE		0x0040	/* Exclude bitmaps corrupted */
-+
-+/*
-+ * Mount flags
-+ */
-+#define EXT2_MOUNT_CHECK		0x0001	/* Do mount-time checks */
-+#define EXT2_MOUNT_GRPID		0x0004	/* Create files with directory's group */
-+#define EXT2_MOUNT_DEBUG		0x0008	/* Some debugging messages */
-+#define EXT2_MOUNT_ERRORS_CONT		0x0010	/* Continue on errors */
-+#define EXT2_MOUNT_ERRORS_RO		0x0020	/* Remount fs ro on errors */
-+#define EXT2_MOUNT_ERRORS_PANIC		0x0040	/* Panic on errors */
-+#define EXT2_MOUNT_MINIX_DF		0x0080	/* Mimics the Minix statfs */
-+#define EXT2_MOUNT_NO_UID32		0x0200  /* Disable 32-bit UIDs */
-+
-+#define clear_opt(o, opt)		o &= ~EXT2_MOUNT_##opt
-+#define set_opt(o, opt)			o |= EXT2_MOUNT_##opt
-+#define test_opt(sb, opt)		(EXT2_SB(sb)->s_mount_opt & \
-+					 EXT2_MOUNT_##opt)
-+/*
-+ * Maximal mount counts between two filesystem checks
-+ */
-+#define EXT2_DFL_MAX_MNT_COUNT		20	/* Allow 20 mounts */
-+#define EXT2_DFL_CHECKINTERVAL		0	/* Don't use interval check */
-+
-+/*
-+ * Behaviour when detecting errors
-+ */
-+#define EXT2_ERRORS_CONTINUE		1	/* Continue execution */
-+#define EXT2_ERRORS_RO			2	/* Remount fs read-only */
-+#define EXT2_ERRORS_PANIC		3	/* Panic */
-+#define EXT2_ERRORS_DEFAULT		EXT2_ERRORS_CONTINUE
-+
-+#if (__GNUC__ >= 4)
-+#define ext4_offsetof(TYPE,MEMBER) __builtin_offsetof(TYPE,MEMBER)
-+#else
-+#define ext4_offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
-+#endif
-+
-+/*
-+ * Structure of the super block
-+ */
-+struct ext2_super_block {
-+	__u32	s_inodes_count;		/* Inodes count */
-+	__u32	s_blocks_count;		/* Blocks count */
-+	__u32	s_r_blocks_count;	/* Reserved blocks count */
-+	__u32	s_free_blocks_count;	/* Free blocks count */
-+	__u32	s_free_inodes_count;	/* Free inodes count */
-+	__u32	s_first_data_block;	/* First Data Block */
-+	__u32	s_log_block_size;	/* Block size */
-+	__u32	s_log_cluster_size;	/* Allocation cluster size */
-+	__u32	s_blocks_per_group;	/* # Blocks per group */
-+	__u32	s_clusters_per_group;	/* # Fragments per group */
-+	__u32	s_inodes_per_group;	/* # Inodes per group */
-+	__u32	s_mtime;		/* Mount time */
-+	__u32	s_wtime;		/* Write time */
-+	__u16	s_mnt_count;		/* Mount count */
-+	__s16	s_max_mnt_count;	/* Maximal mount count */
-+	__u16	s_magic;		/* Magic signature */
-+	__u16	s_state;		/* File system state */
-+	__u16	s_errors;		/* Behaviour when detecting errors */
-+	__u16	s_minor_rev_level;	/* minor revision level */
-+	__u32	s_lastcheck;		/* time of last check */
-+	__u32	s_checkinterval;	/* max. time between checks */
-+	__u32	s_creator_os;		/* OS */
-+	__u32	s_rev_level;		/* Revision level */
-+	__u16	s_def_resuid;		/* Default uid for reserved blocks */
-+	__u16	s_def_resgid;		/* Default gid for reserved blocks */
-+	/*
-+	 * These fields are for EXT2_DYNAMIC_REV superblocks only.
-+	 *
-+	 * Note: the difference between the compatible feature set and
-+	 * the incompatible feature set is that if there is a bit set
-+	 * in the incompatible feature set that the kernel doesn't
-+	 * know about, it should refuse to mount the filesystem.
-+	 *
-+	 * e2fsck's requirements are more strict; if it doesn't know
-+	 * about a feature in either the compatible or incompatible
-+	 * feature set, it must abort and not try to meddle with
-+	 * things it doesn't understand...
-+	 */
-+	__u32	s_first_ino;		/* First non-reserved inode */
-+	__u16   s_inode_size;		/* size of inode structure */
-+	__u16	s_block_group_nr;	/* block group # of this superblock */
-+	__u32	s_feature_compat;	/* compatible feature set */
-+	__u32	s_feature_incompat;	/* incompatible feature set */
-+	__u32	s_feature_ro_compat;	/* readonly-compatible feature set */
-+	__u8	s_uuid[16];		/* 128-bit uuid for volume */
-+	char	s_volume_name[16];	/* volume name */
-+	char	s_last_mounted[64];	/* directory where last mounted */
-+	__u32	s_algorithm_usage_bitmap; /* For compression */
-+	/*
-+	 * Performance hints.  Directory preallocation should only
-+	 * happen if the EXT2_FEATURE_COMPAT_DIR_PREALLOC flag is on.
-+	 */
-+	__u8	s_prealloc_blocks;	/* Nr of blocks to try to preallocate*/
-+	__u8	s_prealloc_dir_blocks;	/* Nr to preallocate for dirs */
-+	__u16	s_reserved_gdt_blocks;	/* Per group table for online growth */
-+	/*
-+	 * Journaling support valid if EXT2_FEATURE_COMPAT_HAS_JOURNAL set.
-+	 */
-+	__u8	s_journal_uuid[16];	/* uuid of journal superblock */
-+	__u32	s_journal_inum;		/* inode number of journal file */
-+	__u32	s_journal_dev;		/* device number of journal file */
-+	__u32	s_last_orphan;		/* start of list of inodes to delete */
-+	__u32	s_hash_seed[4];		/* HTREE hash seed */
-+	__u8	s_def_hash_version;	/* Default hash version to use */
-+	__u8	s_jnl_backup_type; 	/* Default type of journal backup */
-+	__u16	s_desc_size;		/* Group desc. size: INCOMPAT_64BIT */
-+	__u32	s_default_mount_opts;
-+	__u32	s_first_meta_bg;	/* First metablock group */
-+	__u32	s_mkfs_time;		/* When the filesystem was created */
-+	__u32	s_jnl_blocks[17]; 	/* Backup of the journal inode */
-+	__u32	s_blocks_count_hi;	/* Blocks count high 32bits */
-+	__u32	s_r_blocks_count_hi;	/* Reserved blocks count high 32 bits*/
-+	__u32	s_free_blocks_hi; 	/* Free blocks count */
-+	__u16	s_min_extra_isize;	/* All inodes have at least # bytes */
-+	__u16	s_want_extra_isize; 	/* New inodes should reserve # bytes */
-+	__u32	s_flags;		/* Miscellaneous flags */
-+	__u16   s_raid_stride;		/* RAID stride */
-+	__u16   s_mmp_update_interval;  /* # seconds to wait in MMP checking */
-+	__u64   s_mmp_block;            /* Block for multi-mount protection */
-+	__u32   s_raid_stripe_width;    /* blocks on all data disks (N*stride)*/
-+	__u8	s_log_groups_per_flex;	/* FLEX_BG group size */
-+	__u8    s_reserved_char_pad;
-+	__u16	s_reserved_pad;		/* Padding to next 32bits */
-+	__u64	s_kbytes_written;	/* nr of lifetime kilobytes written */
-+	__u32	s_snapshot_inum;	/* Inode number of active snapshot */
-+	__u32	s_snapshot_id;		/* sequential ID of active snapshot */
-+	__u64	s_snapshot_r_blocks_count; /* reserved blocks for active
-+					      snapshot's future use */
-+	__u32	s_snapshot_list;	/* inode number of the head of the on-disk snapshot list */
-+#define EXT4_S_ERR_START ext4_offsetof(struct ext2_super_block, s_error_count)
-+	__u32	s_error_count;		/* number of fs errors */
-+	__u32	s_first_error_time;	/* first time an error happened */
-+	__u32	s_first_error_ino;	/* inode involved in first error */
-+	__u64	s_first_error_block;	/* block involved of first error */
-+	__u8	s_first_error_func[32];	/* function where the error happened */
-+	__u32	s_first_error_line;	/* line number where error happened */
-+	__u32	s_last_error_time;	/* most recent time of an error */
-+	__u32	s_last_error_ino;	/* inode involved in last error */
-+	__u32	s_last_error_line;	/* line number where error happened */
-+	__u64	s_last_error_block;	/* block involved of last error */
-+	__u8	s_last_error_func[32];	/* function where the error happened */
-+#define EXT4_S_ERR_END ext4_offsetof(struct ext2_super_block, s_mount_opts)
-+	__u8	s_mount_opts[64];
-+	__u32	s_usr_quota_inum;	/* inode number of user quota file */
-+	__u32	s_grp_quota_inum;	/* inode number of group quota file */
-+	__u32	s_overhead_blocks;	/* overhead blocks/clusters in fs */
-+	__u32   s_reserved[108];        /* Padding to the end of the block */
-+	__u32	s_checksum;		/* crc32c(superblock) */
-+};
-+
-+#define EXT4_S_ERR_LEN (EXT4_S_ERR_END - EXT4_S_ERR_START)
-+
-+/*
-+ * Codes for operating systems
-+ */
-+#define EXT2_OS_LINUX		0
-+#define EXT2_OS_HURD		1
-+#define EXT2_OBSO_OS_MASIX	2
-+#define EXT2_OS_FREEBSD		3
-+#define EXT2_OS_LITES		4
-+
-+/*
-+ * Revision levels
-+ */
-+#define EXT2_GOOD_OLD_REV	0	/* The good old (original) format */
-+#define EXT2_DYNAMIC_REV	1	/* V2 format w/ dynamic inode sizes */
-+
-+#define EXT2_CURRENT_REV	EXT2_GOOD_OLD_REV
-+#define EXT2_MAX_SUPP_REV	EXT2_DYNAMIC_REV
-+
-+#define EXT2_GOOD_OLD_INODE_SIZE 128
-+
-+/*
-+ * Journal inode backup types
-+ */
-+#define EXT3_JNL_BACKUP_BLOCKS	1
-+
-+/*
-+ * Feature set definitions
-+ */
-+
-+#define EXT2_HAS_COMPAT_FEATURE(sb,mask)			\
-+	( EXT2_SB(sb)->s_feature_compat & (mask) )
-+#define EXT2_HAS_RO_COMPAT_FEATURE(sb,mask)			\
-+	( EXT2_SB(sb)->s_feature_ro_compat & (mask) )
-+#define EXT2_HAS_INCOMPAT_FEATURE(sb,mask)			\
-+	( EXT2_SB(sb)->s_feature_incompat & (mask) )
-+
-+#define EXT2_FEATURE_COMPAT_DIR_PREALLOC	0x0001
-+#define EXT2_FEATURE_COMPAT_IMAGIC_INODES	0x0002
-+#define EXT3_FEATURE_COMPAT_HAS_JOURNAL		0x0004
-+#define EXT2_FEATURE_COMPAT_EXT_ATTR		0x0008
-+#define EXT2_FEATURE_COMPAT_RESIZE_INODE	0x0010
-+#define EXT2_FEATURE_COMPAT_DIR_INDEX		0x0020
-+#define EXT2_FEATURE_COMPAT_LAZY_BG		0x0040
-+/* #define EXT2_FEATURE_COMPAT_EXCLUDE_INODE	0x0080 not used, legacy */
-+#define EXT2_FEATURE_COMPAT_EXCLUDE_BITMAP	0x0100
-+
-+
-+#define EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER	0x0001
-+#define EXT2_FEATURE_RO_COMPAT_LARGE_FILE	0x0002
-+/* #define EXT2_FEATURE_RO_COMPAT_BTREE_DIR	0x0004 not used */
-+#define EXT4_FEATURE_RO_COMPAT_HUGE_FILE	0x0008
-+#define EXT4_FEATURE_RO_COMPAT_GDT_CSUM		0x0010
-+#define EXT4_FEATURE_RO_COMPAT_DIR_NLINK	0x0020
-+#define EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE	0x0040
-+#define EXT4_FEATURE_RO_COMPAT_HAS_SNAPSHOT	0x0080
-+#define EXT4_FEATURE_RO_COMPAT_QUOTA		0x0100
-+#define EXT4_FEATURE_RO_COMPAT_BIGALLOC		0x0200
-+#define EXT4_FEATURE_RO_COMPAT_METADATA_CSUM	0x0400
-+#define EXT4_FEATURE_RO_COMPAT_REPLICA		0x0800
-+
-+#define EXT2_FEATURE_INCOMPAT_COMPRESSION	0x0001
-+#define EXT2_FEATURE_INCOMPAT_FILETYPE		0x0002
-+#define EXT3_FEATURE_INCOMPAT_RECOVER		0x0004 /* Needs recovery */
-+#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV	0x0008 /* Journal device */
-+#define EXT2_FEATURE_INCOMPAT_META_BG		0x0010
-+#define EXT3_FEATURE_INCOMPAT_EXTENTS		0x0040
-+#define EXT4_FEATURE_INCOMPAT_64BIT		0x0080
-+#define EXT4_FEATURE_INCOMPAT_MMP		0x0100
-+#define EXT4_FEATURE_INCOMPAT_FLEX_BG		0x0200
-+#define EXT4_FEATURE_INCOMPAT_EA_INODE		0x0400
-+#define EXT4_FEATURE_INCOMPAT_DIRDATA		0x1000
-+
-+#define EXT2_FEATURE_COMPAT_SUPP	0
-+#define EXT2_FEATURE_INCOMPAT_SUPP    (EXT2_FEATURE_INCOMPAT_FILETYPE| \
-+				       EXT4_FEATURE_INCOMPAT_MMP)
-+#define EXT2_FEATURE_RO_COMPAT_SUPP	(EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER| \
-+					 EXT2_FEATURE_RO_COMPAT_LARGE_FILE| \
-+					 EXT4_FEATURE_RO_COMPAT_DIR_NLINK| \
-+					 EXT2_FEATURE_RO_COMPAT_BTREE_DIR)
-+
-+/*
-+ * Default values for user and/or group using reserved blocks
-+ */
-+#define EXT2_DEF_RESUID		0
-+#define EXT2_DEF_RESGID		0
-+
-+/*
-+ * Default mount options
-+ */
-+#define EXT2_DEFM_DEBUG		0x0001
-+#define EXT2_DEFM_BSDGROUPS	0x0002
-+#define EXT2_DEFM_XATTR_USER	0x0004
-+#define EXT2_DEFM_ACL		0x0008
-+#define EXT2_DEFM_UID16		0x0010
-+#define EXT3_DEFM_JMODE		0x0060
-+#define EXT3_DEFM_JMODE_DATA	0x0020
-+#define EXT3_DEFM_JMODE_ORDERED	0x0040
-+#define EXT3_DEFM_JMODE_WBACK	0x0060
-+#define EXT4_DEFM_NOBARRIER	0x0100
-+#define EXT4_DEFM_BLOCK_VALIDITY 0x0200
-+#define EXT4_DEFM_DISCARD	0x0400
-+#define EXT4_DEFM_NODELALLOC	0x0800
-+
-+/*
-+ * Structure of a directory entry
-+ */
-+#define EXT2_NAME_LEN 255
-+
-+struct ext2_dir_entry {
-+	__u32	inode;			/* Inode number */
-+	__u16	rec_len;		/* Directory entry length */
-+	__u16	name_len;		/* Name length */
-+	char	name[EXT2_NAME_LEN];	/* File name */
-+};
-+
-+/*
-+ * The new version of the directory entry.  Since EXT2 structures are
-+ * stored in intel byte order, and the name_len field could never be
-+ * bigger than 255 chars, it's safe to reclaim the extra byte for the
-+ * file_type field.
-+ */
-+struct ext2_dir_entry_2 {
-+	__u32	inode;			/* Inode number */
-+	__u16	rec_len;		/* Directory entry length */
-+	__u8	name_len;		/* Name length */
-+	__u8	file_type;
-+	char	name[EXT2_NAME_LEN];	/* File name */
-+};
-+
-+/*
-+ * Ext2 directory file types.  Only the low 3 bits are used.  The
-+ * other bits are reserved for now.
-+ */
-+#define EXT2_FT_UNKNOWN		0
-+#define EXT2_FT_REG_FILE	1
-+#define EXT2_FT_DIR		2
-+#define EXT2_FT_CHRDEV		3
-+#define EXT2_FT_BLKDEV		4
-+#define EXT2_FT_FIFO		5
-+#define EXT2_FT_SOCK		6
-+#define EXT2_FT_SYMLINK		7
-+
-+#define EXT2_FT_MAX		8
-+
-+/*
-+ * EXT2_DIR_PAD defines the directory entries boundaries
-+ *
-+ * NOTE: It must be a multiple of 4
-+ */
-+#define EXT2_DIR_PAD			4
-+#define EXT2_DIR_ROUND			(EXT2_DIR_PAD - 1)
-+#define EXT2_DIR_REC_LEN(name_len)	(((name_len) + 8 + EXT2_DIR_ROUND) & \
-+					 ~EXT2_DIR_ROUND)
-+
-+/*
-+ * This structure is used for multiple mount protection. It is written
-+ * into the block number saved in the s_mmp_block field in the superblock.
-+ * Programs that check MMP should assume that if SEQ_FSCK (or any unknown
-+ * code above SEQ_MAX) is present then it is NOT safe to use the filesystem,
-+ * regardless of how old the timestamp is.
-+ *
-+ * The timestamp in the MMP structure will be updated by e2fsck at some
-+ * arbitary intervals (start of passes, after every few groups of inodes
-+ * in pass1 and pass1b).  There is no guarantee that e2fsck is updating
-+ * the MMP block in a timely manner, and the updates it does are purely
-+ * for the convenience of the sysadmin and not for automatic validation.
-+ *
-+ * Note: Only the mmp_seq value is used to determine whether the MMP block
-+ *	is being updated.  The mmp_time, mmp_nodename, and mmp_bdevname
-+ *	fields are only for informational purposes for the administrator,
-+ *	due to clock skew between nodes and hostname HA service takeover.
-+ */
-+#define EXT4_MMP_MAGIC     0x004D4D50U /* ASCII for MMP */
-+#define EXT4_MMP_SEQ_CLEAN 0xFF4D4D50U /* mmp_seq value for clean unmount */
-+#define EXT4_MMP_SEQ_FSCK  0xE24D4D50U /* mmp_seq value when being fscked */
-+#define EXT4_MMP_SEQ_MAX   0xE24D4D4FU /* maximum valid mmp_seq value */
-+
-+struct mmp_struct {
-+	__u32	mmp_magic;		/* Magic number for MMP */
-+	__u32	mmp_seq;		/* Sequence no. updated periodically */
-+	__u64	mmp_time;		/* Time last updated */
-+	char	mmp_nodename[64];	/* Node which last updated MMP block */
-+	char	mmp_bdevname[32];	/* Bdev which last updated MMP block */
-+	__u16	mmp_check_interval;	/* Changed mmp_check_interval */
-+	__u16	mmp_pad1;
-+	__u32	mmp_pad2[227];
-+};
-+
-+/*
-+ * Default interval for MMP update in seconds.
-+ */
-+#define EXT4_MMP_UPDATE_INTERVAL	5
-+
-+/*
-+ * Maximum interval for MMP update in seconds.
-+ */
-+#define EXT4_MMP_MAX_UPDATE_INTERVAL	300
-+
-+/*
-+ * Minimum interval for MMP checking in seconds.
-+ */
-+#define EXT4_MMP_MIN_CHECK_INTERVAL     5
-+
-+#endif	/* _EXT2FS_EXT2_FS_H */
-Index: syslinux-4.03/libinstaller/linuxioctl.h
-===================================================================
---- syslinux-4.03.orig/libinstaller/linuxioctl.h
-+++ syslinux-4.03/libinstaller/linuxioctl.h
-@@ -9,17 +9,33 @@
-
- #include <sys/ioctl.h>
-
-+#ifdef __linux__
-+
- #define statfs _kernel_statfs	/* HACK to deal with broken 2.4 distros */
-
- #include <linux/fd.h>		/* Floppy geometry */
- #include <linux/hdreg.h>	/* Hard disk geometry */
-
--#include <linux/fs.h>		/* FIGETBSZ, FIBMAP, FS_IOC_FIEMAP */
-+#include <linux/fs.h>		/* FIGETBSZ, FIBMAP, FS_IOC_* */
- #include <linux/msdos_fs.h>	/* FAT_IOCTL_SET_ATTRIBUTES */
-
- #undef SECTOR_SIZE		/* Defined in msdos_fs.h for no good reason */
- #undef SECTOR_BITS
--#include <linux/ext2_fs.h>	/* EXT2_IOC_* */
-+
-+#ifndef FS_IOC_GETFLAGS
-+/* Old kernel headers, these were once ext2-specific... */
-+# include <linux/ext2_fs.h>	/* EXT2_IOC_* */
-+
-+# define FS_IOC_GETFLAGS EXT2_IOC_GETFLAGS
-+# define FS_IOC_SETFLAGS EXT2_IOC_SETFLAGS
-+
-+# define FS_IMMUTABLE_FL EXT2_IMMUTABLE_FL
-+
-+#else
-+
-+# include <ext2fs/ext2_fs.h>
-+
-+#endif
-
- #ifndef FAT_IOCTL_GET_ATTRIBUTES
- # define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
-@@ -37,11 +53,13 @@
-
- #undef statfs
-
--#if defined(__linux__) && !defined(BLKGETSIZE64)
-+#ifndef  BLKGETSIZE64
- /* This takes a u64, but the size field says size_t.  Someone screwed big. */
- # define BLKGETSIZE64 _IOR(0x12,114,size_t)
- #endif
-
- #include <linux/loop.h>
-
-+#endif /* __linux__ */
-+
- #endif /* LIBINSTALLER_LINUXIOCTL_H */
-Index: syslinux-4.03/libinstaller/syslxcom.c
-===================================================================
---- syslinux-4.03.orig/libinstaller/syslxcom.c
-+++ syslinux-4.03/libinstaller/syslxcom.c
-@@ -121,9 +121,9 @@ void clear_attributes(int fd)
- 	{
- 	    int flags;
-
--	    if (!ioctl(fd, EXT2_IOC_GETFLAGS, &flags)) {
--		flags &= ~EXT2_IMMUTABLE_FL;
--		ioctl(fd, EXT2_IOC_SETFLAGS, &flags);
-+	    if (!ioctl(fd, FS_IOC_GETFLAGS, &flags)) {
-+		flags &= ~FS_IMMUTABLE_FL;
-+		ioctl(fd, FS_IOC_SETFLAGS, &flags);
- 	    }
- 	    break;
- 	}
-@@ -151,9 +151,9 @@ void set_attributes(int fd)
- 	{
- 	    int flags;
-
--	    if (st.st_uid == 0 && !ioctl(fd, EXT2_IOC_GETFLAGS, &flags)) {
--		flags |= EXT2_IMMUTABLE_FL;
--		ioctl(fd, EXT2_IOC_SETFLAGS, &flags);
-+	    if (st.st_uid == 0 && !ioctl(fd, FS_IOC_GETFLAGS, &flags)) {
-+		flags |= FS_IMMUTABLE_FL;
-+		ioctl(fd, FS_IOC_SETFLAGS, &flags);
- 	    }
- 	    break;
- 	}

meta/recipes-devtools/syslinux/files/no-strip.patch deleted +0 -31

deleted file mode 100644
index 775851a..0000000
@@ -1,31 +0,0 @@
-Disable stripping of binaries
-
-We don't want to strip these as this is handled separately at package
-time.
-
-Upstream-Status: Inappropriate [configuration]
-
-Signed-off-by: Paul Eggleton <[email protected]>
-
---- syslinux-4.03.orig/mtools/Makefile
-+++ syslinux-4.03/mtools/Makefile
-@@ -4,7 +4,7 @@ include $(topdir)/MCONFIG
- OPTFLAGS = -g -Os
- INCLUDES = -I. -I.. -I../libfat -I../libinstaller
- CFLAGS	 = $(GCCWARN) -D_FILE_OFFSET_BITS=64 $(OPTFLAGS) $(INCLUDES)
--LDFLAGS	 = -s
-+LDFLAGS	 =
-
- SRCS     = syslinux.c \
- 	   ../libinstaller/fat.c \
---- syslinux-4.03.orig/utils/Makefile
-+++ syslinux-4.03/utils/Makefile
-@@ -18,7 +18,7 @@ topdir = ..
- include $(topdir)/MCONFIG
-
- CFLAGS   = $(GCCWARN) -Os -fomit-frame-pointer -D_FILE_OFFSET_BITS=64
--LDFLAGS  = -O2 -s
-+LDFLAGS  = -O2
-
- TARGETS	 = mkdiskimage isohybrid gethostip memdiskfind
- TARGETS += isohybrid.pl  # about to be obsoleted

meta/recipes-devtools/syslinux/syslinux_4.03.bb deleted +0 -65

deleted file mode 100644
index 7c3ecda..0000000
@@ -1,65 +0,0 @@
-DESCRIPTION = "A multi-purpose linux bootloader"
-HOMEPAGE = "http://syslinux.zytor.com/"
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3 \
-                    file://README;beginline=28;endline=34;md5=a4607efd4a6392017186d08099e7d546"
-
-# If you really want to run syslinux, you need mtools.  We just want the
-# ldlinux.* stuff for now, so skip mtools-native
-DEPENDS = "nasm-native"
-PR = "r9"
-
-SRC_URI = "${KERNELORG_MIRROR}/linux/utils/boot/syslinux/4.xx/syslinux-${PV}.tar.bz2 \
-           file://cross-build.patch \
-           file://no-strip.patch \
-           file://libinstaller-Avoid-using-linux-ext2_fs.h.patch"
-
-SRC_URI[md5sum] = "a7ca38a0a5786b6efae8fb01a1ae8070"
-SRC_URI[sha256sum] = "c65567e324f9d1f7f794ae8f9578a0292bbd47d7b8d895a004d2f0152d0bda38"
-
-COMPATIBLE_HOST = '(x86_64|i.86).*-(linux|freebsd.*)'
-
-EXTRA_OEMAKE = " \
-	BINDIR=${bindir} SBINDIR=${sbindir} LIBDIR=${libdir} \
-	DATADIR=${datadir} MANDIR=${mandir} INCDIR=${includedir} \
-"
-# syslinux uses $LD for linking, strip `-Wl,' so it can work
-export LDFLAGS = "`echo $LDFLAGS | sed 's/-Wl,//g'`"
-
-do_configure() {
-	# drop win32 targets or build fails
-	sed -e 's,win32/\S*,,g' -i Makefile
-
-	# clean installer executables included in source tarball
-	oe_runmake clean
-}
-
-do_compile() {
-	# Rebuild only the installer; keep precompiled bootloaders
-	# as per author's request (doc/distrib.txt)
-	oe_runmake CC="${CC}" installer
-}
-
-do_install() {
-	oe_runmake install INSTALLROOT="${D}"
-
-	install -d ${D}${libdir}/syslinux/
-	install -m 644 ${S}/core/ldlinux.sys ${D}${libdir}/syslinux/
-	install -m 644 ${S}/core/ldlinux.bss ${D}${libdir}/syslinux/
-}
-
-PACKAGES += "${PN}-extlinux ${PN}-mbr ${PN}-chain ${PN}-pxelinux ${PN}-isolinux ${PN}-misc"
-
-RDEPENDS_${PN} += "mtools"
-
-FILES_${PN} = "${bindir}/syslinux"
-FILES_${PN}-extlinux = "${sbindir}/extlinux"
-FILES_${PN}-mbr = "${libdir}/${BPN}/mbr.bin"
-FILES_${PN}-chain = "${libdir}/${BPN}/chain.c32"
-FILES_${PN}-isolinux = "${libdir}/${BPN}/isolinux.bin"
-FILES_${PN}-pxelinux = "${libdir}/${BPN}/pxelinux.0"
-FILES_${PN}-dev += "${datadir}/${BPN}/com32/lib*${SOLIBS} ${datadir}/${BPN}/com32/include ${datadir}/${BPN}/com32/com32.ld"
-FILES_${PN}-staticdev += "${datadir}/${BPN}/com32/lib*.a ${libdir}/${BPN}/com32/lib*.a"
-FILES_${PN}-misc = "${libdir}/${BPN}/* ${bindir}/*"
-
-BBCLASSEXTEND = "native"

meta/recipes-devtools/syslinux/syslinux_4.06.bb new file +62 -0

new file mode 100644
index 0000000..a30a4a3
@@ -0,0 +1,62 @@
+DESCRIPTION = "A multi-purpose linux bootloader"
+HOMEPAGE = "http://syslinux.zytor.com/"
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3 \
+                    file://README;beginline=35;endline=41;md5=f7249a750bc692d1048b2626752aa415"
+
+# If you really want to run syslinux, you need mtools.  We just want the
+# ldlinux.* stuff for now, so skip mtools-native
+DEPENDS = "nasm-native util-linux"
+PR = "r0"
+
+SRC_URI = "${KERNELORG_MIRROR}/linux/utils/boot/syslinux/4.xx/syslinux-${PV}.tar.bz2"
+
+SRC_URI[md5sum] = "0384ef35b724615074e77b1fc89d5b47"
+SRC_URI[sha256sum] = "dbb7774e36c4596de68fa5e6788ad57809ab31a1760e5d7626e697766d30ad26"
+
+COMPATIBLE_HOST = '(x86_64|i.86).*-(linux|freebsd.*)'
+
+EXTRA_OEMAKE = " \
+	BINDIR=${bindir} SBINDIR=${sbindir} LIBDIR=${libdir} \
+	DATADIR=${datadir} MANDIR=${mandir} INCDIR=${includedir} \
+"
+# syslinux uses $LD for linking, strip `-Wl,' so it can work
+export LDFLAGS = "`echo $LDFLAGS | sed 's/-Wl,//g'`"
+
+do_configure() {
+	# drop win32 targets or build fails
+	sed -e 's,win32/\S*,,g' -i Makefile
+
+	# clean installer executables included in source tarball
+	oe_runmake clean
+}
+
+do_compile() {
+	# Rebuild only the installer; keep precompiled bootloaders
+	# as per author's request (doc/distrib.txt)
+	oe_runmake CC="${CC} -isystem ${STAGING_INCDIR}" installer
+}
+
+do_install() {
+	oe_runmake install INSTALLROOT="${D}"
+
+	install -d ${D}${libdir}/syslinux/
+	install -m 644 ${S}/core/ldlinux.sys ${D}${libdir}/syslinux/
+	install -m 644 ${S}/core/ldlinux.bss ${D}${libdir}/syslinux/
+}
+
+PACKAGES += "${PN}-extlinux ${PN}-mbr ${PN}-chain ${PN}-pxelinux ${PN}-isolinux ${PN}-misc"
+
+RDEPENDS_${PN} += "mtools"
+
+FILES_${PN} = "${bindir}/syslinux"
+FILES_${PN}-extlinux = "${sbindir}/extlinux"
+FILES_${PN}-mbr = "${datadir}/${BPN}/mbr.bin"
+FILES_${PN}-chain = "${datadir}/${BPN}/chain.c32"
+FILES_${PN}-isolinux = "${datadir}/${BPN}/isolinux.bin"
+FILES_${PN}-pxelinux = "${datadir}/${BPN}/pxelinux.0"
+FILES_${PN}-dev += "${datadir}/${BPN}/com32/lib*${SOLIBS} ${datadir}/${BPN}/com32/include ${datadir}/${BPN}/com32/com32.ld"
+FILES_${PN}-staticdev += "${datadir}/${BPN}/com32/lib*.a ${libdir}/${BPN}/com32/lib*.a"
+FILES_${PN}-misc = "${datadir}/${BPN}/* ${libdir}/${BPN}/* ${bindir}/*"
+
+BBCLASSEXTEND = "native"

Jonathan,

This patch still does not address the issue that I mentioned in the last email about the failing to build the native version of isohybrid.

| gcc -isystem /srv/ssd/sgw/machines/fri2/**

Quoted 4 lines

tmp/sysroots/x86_64-linux/usr/**include -O2 -o isohybrid isohybrid.o isohdpfx.o -luuid
| /usr/bin/ld: cannot find -luuid

I mentioned clearly at the end that the -isystem setting to the STAGING_INCDIR is wrong since it does not correctly accound for the libuuid library not being found.

I read your testing report, you might have uuid/util-linux installed on your host which is causing some host contamination issue.

Please verify this.

Thanks
Sau!

Quoted 1,455 lines · Jonathan Liu

Patches are now part of upstream or no longer needed. Added new util-linux dependency for isohybrid. Paths updated to reflect directory structure changes.

INCDIR isn't used by the build process during compilation which results in the compiler not finding uuid/uuid.h from util-linux when compiling isohybrid unless it exists on the host system. This was fixed by adding -isystem ${STAGING_INCDIR} to CC when calling make.

[YOCTO #4438]

Signed-off-by Jonathan Liu <[email protected]>

---
  meta/classes/boot-directdisk.**bbclass               |   2 +-
  .../syslinux/files/cross-**build.patch               |  71 --
  .../libinstaller-Avoid-using-**linux-ext2_fs.h.patch | 975
---------------------
  .../recipes-devtools/syslinux/**files/no-strip.patch |  31 -
  meta/recipes-devtools/**syslinux/syslinux_4.03.bb    |  65 --
  meta/recipes-devtools/**syslinux/syslinux_4.06.bb    |  62 ++
  6 files changed, 63 insertions(+), 1143 deletions(-)

delete mode 100644 meta/recipes-devtools/**syslinux/files/cross-build.*
*patch
delete mode 100644 meta/recipes-devtools/**syslinux/files/libinstaller-
**Avoid-using-linux-ext2_fs.h.**patch
delete mode 100644 meta/recipes-devtools/**
syslinux/files/no-strip.patch
delete mode 100644 meta/recipes-devtools/**syslinux/syslinux_4.03.bb create mode 100644 meta/recipes-devtools/**syslinux/syslinux_4.06.bb

meta/classes/boot-* renamed from meta/classes/boot-**directdisk.bbclass +0 -0

*directdisk.bbclass
index d265485..1506b42 100644

meta/classes/boot-**directdisk.bbclass +1 -1

@@ -82,7 +82,7 @@ build_boot_dd() {
        parted $IMAGE print
 
        OFFSET=`expr $END2 / 512`
-       dd if=${STAGING_LIBDIR}/syslinux/**mbr.bin of=$IMAGE conv=notrunc
+       dd if=${STAGING_DATADIR}/**syslinux/mbr.bin of=$IMAGE

conv=notrunc

        dd if=${HDDIMG} of=$IMAGE conv=notrunc seek=1 bs=512
        dd if=${ROOTFS} of=$IMAGE conv=notrunc seek=$OFFSET bs=512

meta/recipes-devtools/**syslinux/files/cross-build.**patch deleted +0 -71

deleted file mode 100644
index 7bb6bda..0000000
@@ -1,71 +0,0 @@
-Upstream-Status: Inappropriate [configuration]
-
-Use ?= for Makefile variables to use poky environment variables.
-Original method to sed s/CC =/CC ?=/ is not applicable anymore
-because of the Makefile changes.
-
-against 3.86
-
-06/28/2010 - qhe
-
-also AUXDIR stays in $(LIBDIR)/syslinux rather than $(DATADIR)/syslinux
-
-07/08/2010 - qhe
-
-updated for 4.03
-
-11/16/2010 - Qing He <[email protected]>
-
----
-diff --git a/MCONFIG b/MCONFIG
-index e9c16d3..4d49f33 100644
---- a/MCONFIG
-+++ b/MCONFIG
-@@ -18,13 +18,13 @@
- MAKEFLAGS += -r
- MAKE      += -r
-
--BINDIR   = /usr/bin
--SBINDIR  = /sbin
--LIBDIR   = /usr/lib
--DATADIR  = /usr/share
--AUXDIR   = $(DATADIR)/syslinux
--MANDIR         = /usr/man
--INCDIR   = /usr/include
-+BINDIR   ?= /usr/bin
-+SBINDIR  ?= /sbin
-+LIBDIR   ?= /usr/lib
-+DATADIR  ?= /usr/share
-+AUXDIR   = $(LIBDIR)/syslinux
-+MANDIR         ?= /usr/man
-+INCDIR   ?= /usr/include
- TFTPBOOT = /tftpboot
- COM32DIR = $(AUXDIR)/com32
-
-@@ -38,18 +38,18 @@ PERL        = perl
-
- CHMOD  = chmod
-
--CC     = gcc
-+CC     ?= gcc
- gcc_ok   = $(shell tmpf=gcc_ok.$$$$.tmp; \
-                  if $(CC) $(GCCOPT) $(1) -c $(topdir)/dummy.c \
-                       -o $$tmpf 2>/dev/null ; \
-                  then echo '$(1)'; else echo '$(2)'; fi; \
-                  rm -f $$tmpf)
-
--LD     = ld
--OBJDUMP        = objdump
--OBJCOPY  = objcopy
--AR       = ar
--NM       = nm
--RANLIB   = ranlib
-+LD     ?= ld
-+OBJDUMP        ?= objdump
-+OBJCOPY  ?= objcopy
-+AR       ?= ar
-+NM       ?= nm
-+RANLIB   ?= ranlib
- GZIPPROG = gzip
- PNGTOPNM = pngtopnm
- MCOPY    = mcopy

(quoted diff) +0 -0

Avoid-using-linux-ext2_fs.h.**patch b/meta/recipes-devtools/** syslinux/files/libinstaller-**Avoid-using-linux-ext2_fs.h.**patch deleted file mode 100644
index 77d7a5d..0000000
--- a/meta/recipes-devtools/**syslinux/files/libinstaller-** Avoid-using-linux-ext2_fs.h.**patch
+++ /dev/null

(quoted diff) +0 -2

@@ -1,975 +0,0 @@
-From a1006762fa6f98750bb77d76dd992c**b8ea9f9c99 Mon Sep 17 00:00:00 2001
-Message-Id: <a1006762fa6f98750bb77d76dd992**cb8ea9f9c99.1333550572.git.*

*[email protected]<a1006762fa6f98750bb77d76dd992cb8ea9f9c99.1333550572.git.dvhart@linux.intel.com>

Quoted 1 line

meta/recipes-devtools/syslinux/files/libinstaller-Avoid-using-linux-ext2_fs.h.patch deleted +1 -63

-From: "H. Peter Anvin" <[email protected]>
-Date: Mon, 26 Mar 2012 22:51:09 -0700
-Subject: [PATCH] libinstaller: Avoid using <linux/ext2_fs.h>
-
-Don't use <linux/ext2_fs.h> if we can avoid it.
-
-Upstream-Status: Available in syslinux-4.06-pre3
-
-The ioctl constants have been globalized and moved to <linux/fs.h>.
-Use a private copy of ext2_fs.h from e2fsprogs with the ioctl
-constants removed for the data structures.
-
-Do at least attempt backward compatibility for old kernel headers, but
-no real hope of proper operation there...
-
-Signed-off-by: H. Peter Anvin <[email protected]>
-
-Massaged into 4.03.
-
-Integrated-by: Darren Hart <[email protected]>
----
- libinstaller/ext2fs/ext2_fs.h |  856 ++++++++++++++++++++++++++++++**
+++++++++++
- libinstaller/linuxioctl.h     |   29 ++-
- libinstaller/syslxcom.c       |   12 +-
- 3 files changed, 886 insertions(+), 11 deletions(-)
- create mode 100644 libinstaller/ext2fs/ext2_fs.h
-
-Index: syslinux-4.03/libinstaller/**ext2fs/ext2_fs.h
-=============================**==============================**========
---- /dev/null
-+++ syslinux-4.03/libinstaller/**ext2fs/ext2_fs.h
-@@ -0,0 +1,856 @@
-+/*
-+ *  linux/include/linux/ext2_fs.h
-+ *
-+ * Copyright (C) 1992, 1993, 1994, 1995
-+ * Remy Card ([email protected])
-+ * Laboratoire MASI - Institut Blaise Pascal
-+ * Universite Pierre et Marie Curie (Paris VI)
-+ *
-+ *  from
-+ *
-+ *  linux/include/linux/minix_fs.h
-+ *
-+ *  Copyright (C) 1991, 1992  Linus Torvalds
-+ */
-+
-+#ifndef _EXT2FS_EXT2_FS_H
-+#define _EXT2FS_EXT2_FS_H
-+
-+#include <linux/types.h>
-+
-+/*
-+ * The second extended filesystem constants/structures
-+ */
-+
-+/*
-+ * Define EXT2FS_DEBUG to produce debug messages
-+ */
-+#undef EXT2FS_DEBUG
-+
-+/*
-+ * Define EXT2_PREALLOCATE to preallocate data blocks for expanding

files
-+ */
-+#define EXT2_PREALLOCATE
-+#define EXT2_DEFAULT_PREALLOC_BLOCKS 8
-+
-+/*
-+ * The second extended file system version
-+ */
-+#define EXT2FS_DATE "95/08/09"
-+#define EXT2FS_VERSION "0.5b"
-+
-+/*
-+ * Special inode numbers
-+ */

-+#define EXT2_BAD_INO           1      /* Bad blocks inode */
-+#define EXT2_ROOT_INO          2      /* Root inode */
-+#define EXT4_USR_QUOTA_INO     3      /* User quota inode */
-+#define EXT4_GRP_QUOTA_INO     4      /* Group quota inode */
-+#define EXT2_BOOT_LOADER_INO   5      /* Boot loader inode */
-+#define EXT2_UNDEL_DIR_INO     6      /* Undelete directory inode */
-+#define EXT2_RESIZE_INO                7      /* Reserved group
descriptors inode */
-+#define EXT2_JOURNAL_INO       8      /* Journal inode */
-+#define EXT2_EXCLUDE_INO       9      /* The "exclude" inode, for

snapshots */
-+#define EXT4_REPLICA_INO 10 /* Used by non-upstream feature */
-+
-+/* First non-reserved inode for old ext2 filesystems */
-+#define EXT2_GOOD_OLD_FIRST_INO 11
-+
-+/*
-+ * The second extended file system magic number
-+ */
-+#define EXT2_SUPER_MAGIC 0xEF53
-+
-+#ifdef __KERNEL__
-+#define EXT2_SB(sb) (&((sb)->u.ext2_sb))
-+#else
-+/* Assume that user mode programs are passing in an ext2fs superblock, not
-+ * a kernel struct super_block. This will allow us to call the feature-test
-+ * macros from user land. */
-+#define EXT2_SB(sb) (sb)
-+#endif
-+
-+/*
-+ * Maximal count of links to a file
-+ */
-+#define EXT2_LINK_MAX 65000
-+
-+/*
-+ * Macro-instructions used to manage several block sizes -+ */

-+#define EXT2_MIN_BLOCK_LOG_SIZE               10      /* 1024 */
-+#define EXT2_MAX_BLOCK_LOG_SIZE               16      /* 65536 */

-+#define EXT2_MIN_BLOCK_SIZE (1 << EXT2_MIN_BLOCK_LOG_SIZE)
-+#define EXT2_MAX_BLOCK_SIZE (1 << EXT2_MAX_BLOCK_LOG_SIZE)
-+#ifdef __KERNEL__
-+#define EXT2_BLOCK_SIZE(s) ((s)->s_blocksize)
-+#define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits)
-+#define EXT2_ADDR_PER_BLOCK_BITS(s) (EXT2_SB(s)->addr_per_block_**
bits)
-+#define EXT2_INODE_SIZE(s) (EXT2_SB(s)->s_inode_size)
-+#define EXT2_FIRST_INO(s) (EXT2_SB(s)->s_first_ino)
-+#else
-+#define EXT2_BLOCK_SIZE(s) (EXT2_MIN_BLOCK_SIZE <<
(s)->s_log_block_size)
-+#define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10)
-+#define EXT2_INODE_SIZE(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV)
? \
-+ EXT2_GOOD_OLD_INODE_SIZE :
(s)->s_inode_size)
-+#define EXT2_FIRST_INO(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV)
? \
-+ EXT2_GOOD_OLD_FIRST_INO :
(s)->s_first_ino)
-+#endif
-+#define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) /
sizeof(__u32))
-+
-+/*
-+ * Macro-instructions used to manage allocation clusters -+ */

-+#define EXT2_MIN_CLUSTER_LOG_SIZE     EXT2_MIN_BLOCK_LOG_SIZE
-+#define EXT2_MAX_CLUSTER_LOG_SIZE     29      /* 512MB  */
-+#define EXT2_MIN_CLUSTER_SIZE         EXT2_MIN_BLOCK_SIZE
-+#define EXT2_MAX_CLUSTER_SIZE         (1 << EXT2_MAX_CLUSTER_LOG_SIZE)
-+#define EXT2_CLUSTER_SIZE(s)          (EXT2_MIN_BLOCK_SIZE << \

-+ (s)->s_log_cluster_size)
-+#define EXT2_CLUSTER_SIZE_BITS(s) ((s)->s_log_cluster_size + 10)
-+
-+/*
-+ * Macro-instructions used to manage fragments
-+ *
-+ * Note: for backwards compatibility only, for the dump program. -+ * Ext2/3/4 will never support fragments....
-+ */

-+#define EXT2_MIN_FRAG_SIZE              EXT2_MIN_BLOCK_SIZE
-+#define EXT2_MAX_FRAG_SIZE              EXT2_MAX_BLOCK_SIZE
-+#define EXT2_MIN_FRAG_LOG_SIZE          EXT2_MIN_BLOCK_LOG_SIZE

-+#define EXT2_FRAG_SIZE(s) EXT2_BLOCK_SIZE(s)
-+#define EXT2_FRAGS_PER_BLOCK(s) 1
-+
-+/*
-+ * ACL structures
-+ */
-+struct ext2_acl_header /* Header of Access Control Lists */
-+{

-+      __u32   aclh_size;
-+      __u32   aclh_file_count;
-+      __u32   aclh_acle_count;
-+      __u32   aclh_first_acle;

-+};
-+
-+struct ext2_acl_entry /* Access Control List Entry */ -+{

-+      __u32   acle_size;
-+      __u16   acle_perms;     /* Access permissions */
-+      __u16   acle_type;      /* Type of entry */
-+      __u16   acle_tag;       /* User or group identity */
-+      __u16   acle_pad1;
-+      __u32   acle_next;      /* Pointer on next entry for the */

-+ /* same inode or on next free
entry */
-+};
-+
-+/*
-+ * Structure of a blocks group descriptor
-+ */
-+struct ext2_group_desc
-+{

-+      __u32   bg_block_bitmap;        /* Blocks bitmap block */
-+      __u32   bg_inode_bitmap;        /* Inodes bitmap block */
-+      __u32   bg_inode_table;         /* Inodes table block */
-+      __u16   bg_free_blocks_count;   /* Free blocks count */
-+      __u16   bg_free_inodes_count;   /* Free inodes count */
-+      __u16   bg_used_dirs_count;     /* Directories count */
-+      __u16   bg_flags;
-+      __u32   bg_exclude_bitmap_lo;   /* Exclude bitmap for snapshots */
-+      __u16   bg_block_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap)
LSB */
-+      __u16   bg_inode_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap)
LSB */
-+      __u16   bg_itable_unused;       /* Unused inodes count */
-+      __u16   bg_checksum;            /* crc16(s_uuid+grouo_num+group_*

*desc)*/
-+};
-+
-+/*
-+ * Structure of a blocks group descriptor
-+ */
-+struct ext4_group_desc
-+{

-+      __u32   bg_block_bitmap;        /* Blocks bitmap block */
-+      __u32   bg_inode_bitmap;        /* Inodes bitmap block */
-+      __u32   bg_inode_table;         /* Inodes table block */
-+      __u16   bg_free_blocks_count;   /* Free blocks count */
-+      __u16   bg_free_inodes_count;   /* Free inodes count */
-+      __u16   bg_used_dirs_count;     /* Directories count */
-+      __u16   bg_flags;               /* EXT4_BG_flags (INODE_UNINIT,
etc) */
-+      __u32   bg_exclude_bitmap_lo;   /* Exclude bitmap for snapshots */
-+      __u16   bg_block_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap)
LSB */
-+      __u16   bg_inode_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap)
LSB */
-+      __u16   bg_itable_unused;       /* Unused inodes count */
-+      __u16   bg_checksum;            /* crc16(sb_uuid+group+desc) */
-+      __u32   bg_block_bitmap_hi;     /* Blocks bitmap block MSB */
-+      __u32   bg_inode_bitmap_hi;     /* Inodes bitmap block MSB */
-+      __u32   bg_inode_table_hi;      /* Inodes table block MSB */
-+      __u16   bg_free_blocks_count_hi;/* Free blocks count MSB */
-+      __u16   bg_free_inodes_count_hi;/* Free inodes count MSB */
-+      __u16   bg_used_dirs_count_hi;  /* Directories count MSB */
-+      __u16   bg_itable_unused_hi;    /* Unused inodes count MSB */
-+      __u32   bg_exclude_bitmap_hi;   /* Exclude bitmap block MSB */
-+      __u16   bg_block_bitmap_csum_hi;/* crc32c(s_uuid+grp_num+bitmap)

MSB */
-+ __u16 bg_inode_bitmap_csum_hi;/* crc32c(s_uuid+grp_num+bitmap)
MSB */
-+ __u32 bg_reserved;
-+};
-+
-+#define EXT2_BG_INODE_UNINIT 0x0001 /* Inode table/bitmap not initialized */
-+#define EXT2_BG_BLOCK_UNINIT 0x0002 /* Block bitmap not initialized */ -+#define EXT2_BG_INODE_ZEROED 0x0004 /* On-disk itable initialized to zero */
-+
-+/*
-+ * Data structures used by the directory indexing feature -+ *
-+ * Note: all of the multibyte integer fields are little endian. -+ */
-+
-+/*
-+ * Note: dx_root_info is laid out so that if it should somehow get -+ * overlaid by a dirent the two low bits of the hash version will be -+ * zero. Therefore, the hash version mod 4 should never be 0. -+ * Sincerely, the paranoia department.
-+ */
-+struct ext2_dx_root_info {

-+      __u32 reserved_zero;
-+      __u8 hash_version; /* 0 now, 1 at release */
-+      __u8 info_length; /* 8 */
-+      __u8 indirect_levels;
-+      __u8 unused_flags;
-+};
-+
-+#define EXT2_HASH_LEGACY              0
-+#define EXT2_HASH_HALF_MD4            1
-+#define EXT2_HASH_TEA                 2
-+#define EXT2_HASH_LEGACY_UNSIGNED     3 /* reserved for userspace lib */
-+#define EXT2_HASH_HALF_MD4_UNSIGNED   4 /* reserved for userspace lib */

-+#define EXT2_HASH_TEA_UNSIGNED 5 /* reserved for
userspace lib */
-+
-+#define EXT2_HASH_FLAG_INCOMPAT 0x1
-+
-+struct ext2_dx_entry {
-+ __u32 hash;
-+ __u32 block;
-+};
-+
-+struct ext2_dx_countlimit {
-+ __u16 limit;
-+ __u16 count;
-+};
-+
-+
-+/*
-+ * Macro-instructions used to manage group descriptors -+ */

-+#define EXT2_MIN_DESC_SIZE             32
-+#define EXT2_MIN_DESC_SIZE_64BIT       64
-+#define EXT2_MAX_DESC_SIZE             EXT2_MIN_BLOCK_SIZE

-+#define EXT2_DESC_SIZE(s)
\
-+ ((EXT2_SB(s)->s_feature_**incompat &
EXT4_FEATURE_INCOMPAT_64BIT) ? \
-+ (s)->s_desc_size : EXT2_MIN_DESC_SIZE)
-+
-+#define EXT2_BLOCKS_PER_GROUP(s) (EXT2_SB(s)->s_blocks_per_**
group)
-+#define EXT2_INODES_PER_GROUP(s) (EXT2_SB(s)->s_inodes_per_**
group)
-+#define EXT2_CLUSTERS_PER_GROUP(s) (EXT2_SB(s)->s_clusters_per_**
group)
-+#define EXT2_INODES_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s)/EXT2_**
INODE_SIZE(s))
-+/* limits imposed by 16-bit value gd_free_{blocks,inode}_count */
-+#define EXT2_MAX_BLOCKS_PER_GROUP(s) ((((unsigned) 1 << 16) - 8) * \
-+ (EXT2_CLUSTER_SIZE(s) / \
-+ EXT2_BLOCK_SIZE(s)))
-+#define EXT2_MAX_CLUSTERS_PER_GROUP(s) (((unsigned) 1 << 16) - 8)
-+#define EXT2_MAX_INODES_PER_GROUP(s) (((unsigned) 1 << 16) - \
-+ EXT2_INODES_PER_BLOCK(s))
-+#ifdef __KERNEL__
-+#define EXT2_DESC_PER_BLOCK(s)
(EXT2_SB(s)->s_desc_per_block)
-+#define EXT2_DESC_PER_BLOCK_BITS(s) (EXT2_SB(s)->s_desc_per_block_**
bits)
-+#else
-+#define EXT2_DESC_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) /
EXT2_DESC_SIZE(s))
-+#endif
-+
-+/*
-+ * Constants relative to the data blocks
-+ */
-+#define EXT2_NDIR_BLOCKS 12

-+#define EXT2_IND_BLOCK                        EXT2_NDIR_BLOCKS
-+#define EXT2_DIND_BLOCK                       (EXT2_IND_BLOCK + 1)
-+#define EXT2_TIND_BLOCK                       (EXT2_DIND_BLOCK + 1)

-+#define EXT2_N_BLOCKS (EXT2_TIND_BLOCK + 1)
-+
-+/*
-+ * Inode flags
-+ */

-+#define EXT2_SECRM_FL                 0x00000001 /* Secure deletion */
-+#define EXT2_UNRM_FL                  0x00000002 /* Undelete */
-+#define EXT2_COMPR_FL                 0x00000004 /* Compress file */
-+#define EXT2_SYNC_FL                  0x00000008 /* Synchronous updates

*/
-+#define EXT2_IMMUTABLE_FL 0x00000010 /* Immutable file */
-+#define EXT2_APPEND_FL 0x00000020 /* writes to
file may only append */
-+#define EXT2_NODUMP_FL 0x00000040 /* do not dump
file */
-+#define EXT2_NOATIME_FL 0x00000080 /* do not
update atime */
-+/* Reserved for compression usage... */
-+#define EXT2_DIRTY_FL 0x00000100
-+#define EXT2_COMPRBLK_FL 0x00000200 /* One or more
compressed clusters */
-+#define EXT2_NOCOMPR_FL 0x00000400 /* Access raw
compressed data */
-+#define EXT2_ECOMPR_FL 0x00000800 /* Compression
error */
-+/* End compression flags --- maybe not all used */
-+#define EXT2_BTREE_FL 0x00001000 /* btree format dir */
-+#define EXT2_INDEX_FL 0x00001000 /* hash-indexed
directory */
-+#define EXT2_IMAGIC_FL 0x00002000
-+#define EXT3_JOURNAL_DATA_FL 0x00004000 /* file data should be
journaled */
-+#define EXT2_NOTAIL_FL 0x00008000 /* file tail
should not be merged */
-+#define EXT2_DIRSYNC_FL 0x00010000 /* Synchronous
directory modifications */
-+#define EXT2_TOPDIR_FL 0x00020000 /* Top of
directory hierarchies*/
-+#define EXT4_HUGE_FILE_FL 0x00040000 /* Set to each huge
file */
-+#define EXT4_EXTENTS_FL 0x00080000 /* Inode uses extents
*/
-+#define EXT4_EA_INODE_FL 0x00200000 /* Inode used for
large EA */
-+/* EXT4_EOFBLOCKS_FL 0x00400000 was here */
-+#define EXT4_SNAPFILE_FL 0x01000000 /* Inode is a
snapshot */
-+#define EXT4_SNAPFILE_DELETED_FL 0x04000000 /* Snapshot is being
deleted */
-+#define EXT4_SNAPFILE_SHRUNK_FL 0x08000000 /* Snapshot
shrink has completed */
-+#define EXT2_RESERVED_FL 0x80000000 /* reserved for ext2
lib */
-+
-+#define EXT2_FL_USER_VISIBLE 0x004BDFFF /* User visible flags
*/
-+#define EXT2_FL_USER_MODIFIABLE 0x004B80FF /* User
modifiable flags */
-+
-+/*
-+ * ioctl commands
-+ */
-+
-+/* Used for online resize */
-+struct ext2_new_group_input {

-+      __u32 group;            /* Group number for this data */
-+      __u32 block_bitmap;     /* Absolute block number of block bitmap

*/
-+ __u32 inode_bitmap; /* Absolute block number of inode bitmap
*/
-+ __u32 inode_table; /* Absolute block number of inode table
start */

-+      __u32 blocks_count;     /* Total number of blocks in this group */
-+      __u16 reserved_blocks;  /* Number of reserved blocks in this

group */
-+ __u16 unused; /* Number of reserved GDT blocks in group
*/
-+};
-+
-+struct ext4_new_group_input {

-+      __u32 group;            /* Group number for this data */
-+      __u64 block_bitmap;     /* Absolute block number of block bitmap

*/
-+ __u64 inode_bitmap; /* Absolute block number of inode bitmap
*/
-+ __u64 inode_table; /* Absolute block number of inode table
start */

-+      __u32 blocks_count;     /* Total number of blocks in this group */
-+      __u16 reserved_blocks;  /* Number of reserved blocks in this

group */
-+ __u16 unused;
-+};
-+
-+#ifdef __GNU__ /* Needed for the Hurd */
-+#define _IOT_ext2_new_group_input _IOT (_IOTS(__u32), 5, _IOTS(__u16), 2, 0, 0)
-+#endif
-+

-+#define EXT2_IOC_GETFLAGS             _IOR('f', 1, long)
-+#define EXT2_IOC_SETFLAGS             _IOW('f', 2, long)
-+#define EXT2_IOC_GETVERSION           _IOR('v', 1, long)
-+#define EXT2_IOC_SETVERSION           _IOW('v', 2, long)

-+#define EXT2_IOC_GETVERSION_NEW _IOR('f', 3, long)
-+#define EXT2_IOC_SETVERSION_NEW _IOW('f', 4, long)
-+#define EXT2_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long)
-+#define EXT2_IOC_GROUP_ADD _IOW('f', 8,struct
ext2_new_group_input)
-+#define EXT4_IOC_GROUP_ADD _IOW('f', 8,struct
ext4_new_group_input)
-+#define EXT4_IOC_RESIZE_FS _IOW('f', 16, __u64)
-+
-+/*
-+ * Structure of an inode on the disk
-+ */
-+struct ext2_inode {

-+      __u16   i_mode;         /* File mode */
-+      __u16   i_uid;          /* Low 16 bits of Owner Uid */
-+      __u32   i_size;         /* Size in bytes */
-+      __u32   i_atime;        /* Access time */
-+      __u32   i_ctime;        /* Inode change time */
-+      __u32   i_mtime;        /* Modification time */
-+      __u32   i_dtime;        /* Deletion Time */
-+      __u16   i_gid;          /* Low 16 bits of Group Id */
-+      __u16   i_links_count;  /* Links count */
-+      __u32   i_blocks;       /* Blocks count */
-+      __u32   i_flags;        /* File flags */
-+      union {

-+ struct {
-+ __u32 l_i_version; /* was l_i_reserved1 */
-+ } linux1;
-+ struct {
-+ __u32 h_i_translator;
-+ } hurd1;

-+      } osd1;                         /* OS dependent 1 */
-+      __u32   i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
-+      __u32   i_generation;   /* File version (for NFS) */
-+      __u32   i_file_acl;     /* File ACL */
-+      __u32   i_size_high;    /* Formerly i_dir_acl, directory ACL */
-+      __u32   i_faddr;        /* Fragment address */
-+      union {
-+              struct {
-+                      __u16   l_i_blocks_hi;
-+                      __u16   l_i_file_acl_high;
-+                      __u16   l_i_uid_high;   /* these 2 fields    */
-+                      __u16   l_i_gid_high;   /* were reserved2[0] */
-+                      __u16   l_i_checksum_lo; /*

crc32c(uuid+inum+inode) */
-+ __u16 l_i_reserved;
-+ } linux2;
-+ struct {

-+                      __u8    h_i_frag;       /* Fragment number */
-+                      __u8    h_i_fsize;      /* Fragment size */
-+                      __u16   h_i_mode_high;
-+                      __u16   h_i_uid_high;
-+                      __u16   h_i_gid_high;
-+                      __u32   h_i_author;

-+ } hurd2;
-+ } osd2; /* OS dependent 2 */
-+};
-+
-+/*
-+ * Permanent part of an large inode on the disk
-+ */
-+struct ext2_inode_large {

-+      __u16   i_mode;         /* File mode */
-+      __u16   i_uid;          /* Low 16 bits of Owner Uid */
-+      __u32   i_size;         /* Size in bytes */
-+      __u32   i_atime;        /* Access time */
-+      __u32   i_ctime;        /* Inode Change time */
-+      __u32   i_mtime;        /* Modification time */
-+      __u32   i_dtime;        /* Deletion Time */
-+      __u16   i_gid;          /* Low 16 bits of Group Id */
-+      __u16   i_links_count;  /* Links count */
-+      __u32   i_blocks;       /* Blocks count */
-+      __u32   i_flags;        /* File flags */
-+      union {

-+ struct {
-+ __u32 l_i_version; /* was l_i_reserved1 */
-+ } linux1;
-+ struct {
-+ __u32 h_i_translator;
-+ } hurd1;

-+      } osd1;                         /* OS dependent 1 */
-+      __u32   i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
-+      __u32   i_generation;   /* File version (for NFS) */
-+      __u32   i_file_acl;     /* File ACL */
-+      __u32   i_size_high;    /* Formerly i_dir_acl, directory ACL */
-+      __u32   i_faddr;        /* Fragment address */
-+      union {
-+              struct {
-+                      __u16   l_i_blocks_hi;
-+                      __u16   l_i_file_acl_high;
-+                      __u16   l_i_uid_high;   /* these 2 fields    */
-+                      __u16   l_i_gid_high;   /* were reserved2[0] */
-+                      __u16   l_i_checksum_lo; /*

crc32c(uuid+inum+inode) */
-+ __u16 l_i_reserved;
-+ } linux2;
-+ struct {

-+                      __u8    h_i_frag;       /* Fragment number */
-+                      __u8    h_i_fsize;      /* Fragment size */
-+                      __u16   h_i_mode_high;
-+                      __u16   h_i_uid_high;
-+                      __u16   h_i_gid_high;
-+                      __u32   h_i_author;
-+              } hurd2;
-+      } osd2;                         /* OS dependent 2 */
-+      __u16   i_extra_isize;
-+      __u16   i_checksum_hi;  /* crc32c(uuid+inum+inode) */
-+      __u32   i_ctime_extra;  /* extra Change time (nsec << 2 | epoch)

*/
-+ __u32 i_mtime_extra; /* extra Modification time (nsec << 2 |
epoch) */
-+ __u32 i_atime_extra; /* extra Access time (nsec << 2 | epoch)
*/

-+      __u32   i_crtime;       /* File creation time */
-+      __u32   i_crtime_extra; /* extra File creation time (nsec << 2 |

epoch)*/
-+ __u32 i_version_hi; /* high 32 bits for 64-bit version */
-+};
-+
-+#define i_dir_acl i_size_high
-+
-+#if defined(__KERNEL__) || defined(__linux__)
-+#define i_reserved1 osd1.linux1.l_i_reserved1
-+#define i_frag osd2.linux2.l_i_frag
-+#define i_fsize osd2.linux2.l_i_fsize

-+#define i_uid_low     i_uid
-+#define i_gid_low     i_gid
-+#define i_uid_high    osd2.linux2.l_i_uid_high
-+#define i_gid_high    osd2.linux2.l_i_gid_high

-+#else
-+#if defined(__GNU__)
-+
-+#define i_translator osd1.hurd1.h_i_translator
-+#define i_frag osd2.hurd2.h_i_frag;
-+#define i_fsize osd2.hurd2.h_i_fsize;

-+#define i_uid_high    osd2.hurd2.h_i_uid_high
-+#define i_gid_high    osd2.hurd2.h_i_gid_high
-+#define i_author      osd2.hurd2.h_i_author

-+
-+#endif /* __GNU__ */
-+#endif /* defined(__KERNEL__) || defined(__linux__) */
-+
-+#define inode_uid(inode) ((inode).i_uid |
(inode).osd2.linux2.l_i_uid_**high << 16)
-+#define inode_gid(inode) ((inode).i_gid |
(inode).osd2.linux2.l_i_gid_**high << 16)
-+#define ext2fs_set_i_uid_high(inode,x) ((inode).osd2.linux2.l_i_uid_**high = (x))
-+#define ext2fs_set_i_gid_high(inode,x) ((inode).osd2.linux2.l_i_gid_**high = (x))
-+
-+/*
-+ * File system states
-+ */

-+#define EXT2_VALID_FS                 0x0001  /* Unmounted cleanly */
-+#define EXT2_ERROR_FS                 0x0002  /* Errors detected */
-+#define EXT3_ORPHAN_FS                        0x0004  /* Orphans being

recovered */
-+
-+/*
-+ * Misc. filesystem flags
-+ */
-+#define EXT2_FLAGS_SIGNED_HASH 0x0001 /* Signed dirhash
in use */
-+#define EXT2_FLAGS_UNSIGNED_HASH 0x0002 /* Unsigned dirhash in
use */
-+#define EXT2_FLAGS_TEST_FILESYS 0x0004 /* OK for use on
development code */
-+#define EXT2_FLAGS_IS_SNAPSHOT 0x0010 /* This is a
snapshot image */
-+#define EXT2_FLAGS_FIX_SNAPSHOT 0x0020 /* Snapshot
inodes corrupted */
-+#define EXT2_FLAGS_FIX_EXCLUDE 0x0040 /* Exclude
bitmaps corrupted */
-+
-+/*
-+ * Mount flags
-+ */

-+#define EXT2_MOUNT_CHECK              0x0001  /* Do mount-time checks */
-+#define EXT2_MOUNT_GRPID              0x0004  /* Create files with

directory's group */
-+#define EXT2_MOUNT_DEBUG 0x0008 /* Some debugging
messages */
-+#define EXT2_MOUNT_ERRORS_CONT 0x0010 /* Continue on
errors */
-+#define EXT2_MOUNT_ERRORS_RO 0x0020 /* Remount fs ro on
errors */
-+#define EXT2_MOUNT_ERRORS_PANIC 0x0040 /* Panic on
errors */
-+#define EXT2_MOUNT_MINIX_DF 0x0080 /* Mimics the Minix
statfs */
-+#define EXT2_MOUNT_NO_UID32 0x0200 /* Disable 32-bit UIDs */
-+
-+#define clear_opt(o, opt) o &= ~EXT2_MOUNT_##opt
-+#define set_opt(o, opt) o |= EXT2_MOUNT_##opt
-+#define test_opt(sb, opt) (EXT2_SB(sb)->s_mount_opt & \
-+ EXT2_MOUNT_##opt)
-+/*
-+ * Maximal mount counts between two filesystem checks
-+ */
-+#define EXT2_DFL_MAX_MNT_COUNT 20 /* Allow 20
mounts */
-+#define EXT2_DFL_CHECKINTERVAL 0 /* Don't use
interval check */
-+
-+/*
-+ * Behaviour when detecting errors
-+ */
-+#define EXT2_ERRORS_CONTINUE 1 /* Continue execution */
-+#define EXT2_ERRORS_RO 2 /* Remount fs
read-only */
-+#define EXT2_ERRORS_PANIC 3 /* Panic */
-+#define EXT2_ERRORS_DEFAULT EXT2_ERRORS_CONTINUE
-+
-+#if (__GNUC__ >= 4)
-+#define ext4_offsetof(TYPE,MEMBER) __builtin_offsetof(TYPE,**MEMBER) -+#else
-+#define ext4_offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) -+#endif
-+
-+/*
-+ * Structure of the super block
-+ */
-+struct ext2_super_block {

-+      __u32   s_inodes_count;         /* Inodes count */
-+      __u32   s_blocks_count;         /* Blocks count */
-+      __u32   s_r_blocks_count;       /* Reserved blocks count */
-+      __u32   s_free_blocks_count;    /* Free blocks count */
-+      __u32   s_free_inodes_count;    /* Free inodes count */
-+      __u32   s_first_data_block;     /* First Data Block */
-+      __u32   s_log_block_size;       /* Block size */
-+      __u32   s_log_cluster_size;     /* Allocation cluster size */
-+      __u32   s_blocks_per_group;     /* # Blocks per group */
-+      __u32   s_clusters_per_group;   /* # Fragments per group */
-+      __u32   s_inodes_per_group;     /* # Inodes per group */
-+      __u32   s_mtime;                /* Mount time */
-+      __u32   s_wtime;                /* Write time */
-+      __u16   s_mnt_count;            /* Mount count */
-+      __s16   s_max_mnt_count;        /* Maximal mount count */
-+      __u16   s_magic;                /* Magic signature */
-+      __u16   s_state;                /* File system state */
-+      __u16   s_errors;               /* Behaviour when detecting
errors */
-+      __u16   s_minor_rev_level;      /* minor revision level */
-+      __u32   s_lastcheck;            /* time of last check */
-+      __u32   s_checkinterval;        /* max. time between checks */
-+      __u32   s_creator_os;           /* OS */
-+      __u32   s_rev_level;            /* Revision level */
-+      __u16   s_def_resuid;           /* Default uid for reserved

blocks */
-+ __u16 s_def_resgid; /* Default gid for reserved
blocks */
-+ /*

-+       * These fields are for EXT2_DYNAMIC_REV superblocks only.
-+       *
-+       * Note: the difference between the compatible feature set and
-+       * the incompatible feature set is that if there is a bit set
-+       * in the incompatible feature set that the kernel doesn't
-+       * know about, it should refuse to mount the filesystem.
-+       *
-+       * e2fsck's requirements are more strict; if it doesn't know
-+       * about a feature in either the compatible or incompatible
-+       * feature set, it must abort and not try to meddle with
-+       * things it doesn't understand...
-+       */
-+      __u32   s_first_ino;            /* First non-reserved inode */
-+      __u16   s_inode_size;           /* size of inode structure */
-+      __u16   s_block_group_nr;       /* block group # of this
superblock */
-+      __u32   s_feature_compat;       /* compatible feature set */
-+      __u32   s_feature_incompat;     /* incompatible feature set */
-+      __u32   s_feature_ro_compat;    /* readonly-compatible feature
set */
-+      __u8    s_uuid[16];             /* 128-bit uuid for volume */
-+      char    s_volume_name[16];      /* volume name */
-+      char    s_last_mounted[64];     /* directory where last mounted */
-+      __u32   s_algorithm_usage_bitmap; /* For compression */
-+      /*
-+       * Performance hints.  Directory preallocation should only
-+       * happen if the EXT2_FEATURE_COMPAT_DIR_**PREALLOC flag is on.
-+       */
-+      __u8    s_prealloc_blocks;      /* Nr of blocks to try to
preallocate*/
-+      __u8    s_prealloc_dir_blocks;  /* Nr to preallocate for dirs */
-+      __u16   s_reserved_gdt_blocks;  /* Per group table for online

growth */
-+ /*
-+ * Journaling support valid if EXT2_FEATURE_COMPAT_HAS_**JOURNAL
set.
-+ */

-+      __u8    s_journal_uuid[16];     /* uuid of journal superblock */
-+      __u32   s_journal_inum;         /* inode number of journal file */
-+      __u32   s_journal_dev;          /* device number of journal file
*/
-+      __u32   s_last_orphan;          /* start of list of inodes to
delete */
-+      __u32   s_hash_seed[4];         /* HTREE hash seed */
-+      __u8    s_def_hash_version;     /* Default hash version to use */
-+      __u8    s_jnl_backup_type;      /* Default type of journal backup
*/
-+      __u16   s_desc_size;            /* Group desc. size:
INCOMPAT_64BIT */
-+      __u32   s_default_mount_opts;
-+      __u32   s_first_meta_bg;        /* First metablock group */
-+      __u32   s_mkfs_time;            /* When the filesystem was
created */
-+      __u32   s_jnl_blocks[17];       /* Backup of the journal inode */
-+      __u32   s_blocks_count_hi;      /* Blocks count high 32bits */
-+      __u32   s_r_blocks_count_hi;    /* Reserved blocks count high 32
bits*/
-+      __u32   s_free_blocks_hi;       /* Free blocks count */
-+      __u16   s_min_extra_isize;      /* All inodes have at least #
bytes */
-+      __u16   s_want_extra_isize;     /* New inodes should reserve #
bytes */
-+      __u32   s_flags;                /* Miscellaneous flags */
-+      __u16   s_raid_stride;          /* RAID stride */
-+      __u16   s_mmp_update_interval;  /* # seconds to wait in MMP

checking */
-+ __u64 s_mmp_block; /* Block for multi-mount
protection */
-+ __u32 s_raid_stripe_width; /* blocks on all data disks
(N*stride)*/

-+      __u8    s_log_groups_per_flex;  /* FLEX_BG group size */
-+      __u8    s_reserved_char_pad;
-+      __u16   s_reserved_pad;         /* Padding to next 32bits */
-+      __u64   s_kbytes_written;       /* nr of lifetime kilobytes

written */
-+ __u32 s_snapshot_inum; /* Inode number of active
snapshot */
-+ __u32 s_snapshot_id; /* sequential ID of active
snapshot */
-+ __u64 s_snapshot_r_blocks_count; /* reserved blocks for active
-+ snapshot's future use */
-+ __u32 s_snapshot_list; /* inode number of the head of
the on-disk snapshot list */
-+#define EXT4_S_ERR_START ext4_offsetof(struct ext2_super_block, s_error_count)

-+      __u32   s_error_count;          /* number of fs errors */
-+      __u32   s_first_error_time;     /* first time an error happened */
-+      __u32   s_first_error_ino;      /* inode involved in first error

*/
-+ __u64 s_first_error_block; /* block involved of first error
*/
-+ __u8 s_first_error_func[32]; /* function where the error
happened */
-+ __u32 s_first_error_line; /* line number where error
happened */

-+      __u32   s_last_error_time;      /* most recent time of an error */
-+      __u32   s_last_error_ino;       /* inode involved in last error */
-+      __u32   s_last_error_line;      /* line number where error
happened */
-+      __u64   s_last_error_block;     /* block involved of last error */
-+      __u8    s_last_error_func[32];  /* function where the error
happened */
-+#define EXT4_S_ERR_END ext4_offsetof(struct ext2_super_block,
s_mount_opts)
-+      __u8    s_mount_opts[64];
-+      __u32   s_usr_quota_inum;       /* inode number of user quota

file */
-+ __u32 s_grp_quota_inum; /* inode number of group quota
file */
-+ __u32 s_overhead_blocks; /* overhead blocks/clusters in fs
*/
-+ __u32 s_reserved[108]; /* Padding to the end of the
block */
-+ __u32 s_checksum; /* crc32c(superblock) */
-+};
-+
-+#define EXT4_S_ERR_LEN (EXT4_S_ERR_END - EXT4_S_ERR_START) -+
-+/*
-+ * Codes for operating systems
-+ */

-+#define EXT2_OS_LINUX         0
-+#define EXT2_OS_HURD          1
-+#define EXT2_OBSO_OS_MASIX    2

-+#define EXT2_OS_FREEBSD 3
-+#define EXT2_OS_LITES 4
-+
-+/*
-+ * Revision levels
-+ */
-+#define EXT2_GOOD_OLD_REV 0 /* The good old (original) format
*/
-+#define EXT2_DYNAMIC_REV 1 /* V2 format w/ dynamic inode
sizes */
-+
-+#define EXT2_CURRENT_REV EXT2_GOOD_OLD_REV
-+#define EXT2_MAX_SUPP_REV EXT2_DYNAMIC_REV
-+
-+#define EXT2_GOOD_OLD_INODE_SIZE 128
-+
-+/*
-+ * Journal inode backup types
-+ */
-+#define EXT3_JNL_BACKUP_BLOCKS 1
-+
-+/*
-+ * Feature set definitions
-+ */
-+
-+#define EXT2_HAS_COMPAT_FEATURE(sb,**mask) \
-+ ( EXT2_SB(sb)->s_feature_compat & (mask) )
-+#define EXT2_HAS_RO_COMPAT_FEATURE(sb,**mask) \
-+ ( EXT2_SB(sb)->s_feature_ro_**compat & (mask) )
-+#define EXT2_HAS_INCOMPAT_FEATURE(sb,**mask) \
-+ ( EXT2_SB(sb)->s_feature_**incompat & (mask) )
-+
-+#define EXT2_FEATURE_COMPAT_DIR_**PREALLOC 0x0001
-+#define EXT2_FEATURE_COMPAT_IMAGIC_**INODES 0x0002
-+#define EXT3_FEATURE_COMPAT_HAS_**JOURNAL 0x0004
-+#define EXT2_FEATURE_COMPAT_EXT_ATTR 0x0008
-+#define EXT2_FEATURE_COMPAT_RESIZE_**INODE 0x0010
-+#define EXT2_FEATURE_COMPAT_DIR_INDEX 0x0020
-+#define EXT2_FEATURE_COMPAT_LAZY_BG 0x0040
-+/* #define EXT2_FEATURE_COMPAT_EXCLUDE_**INODE 0x0080 not used, legacy */
-+#define EXT2_FEATURE_COMPAT_EXCLUDE_**BITMAP 0x0100
-+
-+

-+#define EXT2_FEATURE_RO_COMPAT_SPARSE_**SUPER   0x0001
-+#define EXT2_FEATURE_RO_COMPAT_LARGE_**FILE     0x0002
-+/* #define EXT2_FEATURE_RO_COMPAT_BTREE_**DIR   0x0004 not used */
-+#define EXT4_FEATURE_RO_COMPAT_HUGE_**FILE      0x0008
-+#define EXT4_FEATURE_RO_COMPAT_GDT_**CSUM               0x0010
-+#define EXT4_FEATURE_RO_COMPAT_DIR_**NLINK      0x0020
-+#define EXT4_FEATURE_RO_COMPAT_EXTRA_**ISIZE    0x0040
-+#define EXT4_FEATURE_RO_COMPAT_HAS_**SNAPSHOT   0x0080

-+#define EXT4_FEATURE_RO_COMPAT_QUOTA 0x0100
-+#define EXT4_FEATURE_RO_COMPAT_**BIGALLOC 0x0200
-+#define EXT4_FEATURE_RO_COMPAT_**METADATA_CSUM 0x0400
-+#define EXT4_FEATURE_RO_COMPAT_REPLICA 0x0800
-+
-+#define EXT2_FEATURE_INCOMPAT_**COMPRESSION 0x0001
-+#define EXT2_FEATURE_INCOMPAT_FILETYPE 0x0002
-+#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 /* Needs recovery
*/
-+#define EXT3_FEATURE_INCOMPAT_JOURNAL_**DEV 0x0008 /* Journal
device */

-+#define EXT2_FEATURE_INCOMPAT_META_BG         0x0010
-+#define EXT3_FEATURE_INCOMPAT_EXTENTS         0x0040
-+#define EXT4_FEATURE_INCOMPAT_64BIT           0x0080
-+#define EXT4_FEATURE_INCOMPAT_MMP             0x0100
-+#define EXT4_FEATURE_INCOMPAT_FLEX_BG         0x0200

-+#define EXT4_FEATURE_INCOMPAT_EA_INODE 0x0400
-+#define EXT4_FEATURE_INCOMPAT_DIRDATA 0x1000
-+
-+#define EXT2_FEATURE_COMPAT_SUPP 0
-+#define EXT2_FEATURE_INCOMPAT_SUPP (EXT2_FEATURE_INCOMPAT_**FILETYPE|
\
-+ EXT4_FEATURE_INCOMPAT_MMP)
-+#define EXT2_FEATURE_RO_COMPAT_SUPP (EXT2_FEATURE_RO_COMPAT_**SPARSE_SUPER|
\
-+ EXT2_FEATURE_RO_COMPAT_LARGE_**FILE|
\
-+ EXT4_FEATURE_RO_COMPAT_DIR_**NLINK|
\
-+ EXT2_FEATURE_RO_COMPAT_BTREE_**
DIR)
-+
-+/*
-+ * Default values for user and/or group using reserved blocks -+ */
-+#define EXT2_DEF_RESUID 0
-+#define EXT2_DEF_RESGID 0
-+
-+/*
-+ * Default mount options
-+ */
-+#define EXT2_DEFM_DEBUG 0x0001

-+#define EXT2_DEFM_BSDGROUPS   0x0002
-+#define EXT2_DEFM_XATTR_USER  0x0004
-+#define EXT2_DEFM_ACL         0x0008

-+#define EXT2_DEFM_UID16 0x0010
-+#define EXT3_DEFM_JMODE 0x0060
-+#define EXT3_DEFM_JMODE_DATA 0x0020
-+#define EXT3_DEFM_JMODE_ORDERED 0x0040
-+#define EXT3_DEFM_JMODE_WBACK 0x0060
-+#define EXT4_DEFM_NOBARRIER 0x0100
-+#define EXT4_DEFM_BLOCK_VALIDITY 0x0200
-+#define EXT4_DEFM_DISCARD 0x0400
-+#define EXT4_DEFM_NODELALLOC 0x0800
-+
-+/*
-+ * Structure of a directory entry
-+ */
-+#define EXT2_NAME_LEN 255
-+
-+struct ext2_dir_entry {

-+      __u32   inode;                  /* Inode number */
-+      __u16   rec_len;                /* Directory entry length */
-+      __u16   name_len;               /* Name length */
-+      char    name[EXT2_NAME_LEN];    /* File name */

-+};
-+
-+/*
-+ * The new version of the directory entry. Since EXT2 structures are -+ * stored in intel byte order, and the name_len field could never be -+ * bigger than 255 chars, it's safe to reclaim the extra byte for the -+ * file_type field.
-+ */
-+struct ext2_dir_entry_2 {

-+      __u32   inode;                  /* Inode number */
-+      __u16   rec_len;                /* Directory entry length */
-+      __u8    name_len;               /* Name length */
-+      __u8    file_type;
-+      char    name[EXT2_NAME_LEN];    /* File name */

-+};
-+
-+/*
-+ * Ext2 directory file types. Only the low 3 bits are used. The -+ * other bits are reserved for now.
-+ */
-+#define EXT2_FT_UNKNOWN 0
-+#define EXT2_FT_REG_FILE 1
-+#define EXT2_FT_DIR 2
-+#define EXT2_FT_CHRDEV 3
-+#define EXT2_FT_BLKDEV 4
-+#define EXT2_FT_FIFO 5
-+#define EXT2_FT_SOCK 6
-+#define EXT2_FT_SYMLINK 7
-+
-+#define EXT2_FT_MAX 8
-+
-+/*
-+ * EXT2_DIR_PAD defines the directory entries boundaries
-+ *
-+ * NOTE: It must be a multiple of 4
-+ */
-+#define EXT2_DIR_PAD 4
-+#define EXT2_DIR_ROUND (EXT2_DIR_PAD - 1)
-+#define EXT2_DIR_REC_LEN(name_len) (((name_len) + 8 +
EXT2_DIR_ROUND) & \
-+ ~EXT2_DIR_ROUND)
-+
-+/*
-+ * This structure is used for multiple mount protection. It is written -+ * into the block number saved in the s_mmp_block field in the superblock.
-+ * Programs that check MMP should assume that if SEQ_FSCK (or any unknown
-+ * code above SEQ_MAX) is present then it is NOT safe to use the filesystem,
-+ * regardless of how old the timestamp is.
-+ *
-+ * The timestamp in the MMP structure will be updated by e2fsck at some -+ * arbitary intervals (start of passes, after every few groups of inodes -+ * in pass1 and pass1b). There is no guarantee that e2fsck is updating -+ * the MMP block in a timely manner, and the updates it does are purely -+ * for the convenience of the sysadmin and not for automatic validation. -+ *
-+ * Note: Only the mmp_seq value is used to determine whether the MMP block

-+ *    is being updated.  The mmp_time, mmp_nodename, and mmp_bdevname
-+ *    fields are only for informational purposes for the administrator,
-+ *    due to clock skew between nodes and hostname HA service takeover.

-+ */
-+#define EXT4_MMP_MAGIC 0x004D4D50U /* ASCII for MMP */
-+#define EXT4_MMP_SEQ_CLEAN 0xFF4D4D50U /* mmp_seq value for clean unmount */
-+#define EXT4_MMP_SEQ_FSCK 0xE24D4D50U /* mmp_seq value when being fscked */
-+#define EXT4_MMP_SEQ_MAX 0xE24D4D4FU /* maximum valid mmp_seq value */
-+
-+struct mmp_struct {

-+      __u32   mmp_magic;              /* Magic number for MMP */
-+      __u32   mmp_seq;                /* Sequence no. updated
periodically */
-+      __u64   mmp_time;               /* Time last updated */
-+      char    mmp_nodename[64];       /* Node which last updated MMP
block */
-+      char    mmp_bdevname[32];       /* Bdev which last updated MMP
block */
-+      __u16   mmp_check_interval;     /* Changed mmp_check_interval */
-+      __u16   mmp_pad1;
-+      __u32   mmp_pad2[227];

-+};
-+
-+/*
-+ * Default interval for MMP update in seconds. -+ */
-+#define EXT4_MMP_UPDATE_INTERVAL 5
-+
-+/*
-+ * Maximum interval for MMP update in seconds. -+ */
-+#define EXT4_MMP_MAX_UPDATE_INTERVAL 300 -+
-+/*
-+ * Minimum interval for MMP checking in seconds. -+ */
-+#define EXT4_MMP_MIN_CHECK_INTERVAL 5
-+
-+#endif /* _EXT2FS_EXT2_FS_H */

meta/recipes-devtools/syslinux/files/libinstaller-Avoid-using-linux-ext2_fs.h.patch deleted +0 -20

-Index: syslinux-4.03/libinstaller/**linuxioctl.h
-=============================**==============================**========
---- syslinux-4.03.orig/**libinstaller/linuxioctl.h
-+++ syslinux-4.03/libinstaller/**linuxioctl.h
-@@ -9,17 +9,33 @@
-
- #include <sys/ioctl.h>
-
-+#ifdef __linux__
-+
- #define statfs _kernel_statfs /* HACK to deal with broken 2.4 distros */
-
- #include <linux/fd.h>         /* Floppy geometry */
- #include <linux/hdreg.h>      /* Hard disk geometry */
-
--#include <linux/fs.h>         /* FIGETBSZ, FIBMAP, FS_IOC_FIEMAP */
-+#include <linux/fs.h>         /* FIGETBSZ, FIBMAP, FS_IOC_* */
- #include <linux/msdos_fs.h>   /* FAT_IOCTL_SET_ATTRIBUTES */
-
- #undef SECTOR_SIZE            /* Defined in msdos_fs.h for no good

reason */
- #undef SECTOR_BITS
--#include <linux/ext2_fs.h> /* EXT2_IOC_* */
-+
-+#ifndef FS_IOC_GETFLAGS
-+/* Old kernel headers, these were once ext2-specific... */
-+# include <linux/ext2_fs.h> /* EXT2_IOC_* */
-+
-+# define FS_IOC_GETFLAGS EXT2_IOC_GETFLAGS
-+# define FS_IOC_SETFLAGS EXT2_IOC_SETFLAGS
-+
-+# define FS_IMMUTABLE_FL EXT2_IMMUTABLE_FL
-+
-+#else
-+
-+# include <ext2fs/ext2_fs.h>
-+
-+#endif

meta/recipes-devtools/syslinux/files/libinstaller-Avoid-using-linux-ext2_fs.h.patch deleted +0 -10

-
- #ifndef FAT_IOCTL_GET_ATTRIBUTES
- # define FAT_IOCTL_GET_ATTRIBUTES     _IOR('r', 0x10, __u32)
-@@ -37,11 +53,13 @@
-
- #undef statfs
-
--#if defined(__linux__) && !defined(BLKGETSIZE64)
-+#ifndef  BLKGETSIZE64
- /* This takes a u64, but the size field says size_t.  Someone screwed

big. */
- # define BLKGETSIZE64 _IOR(0x12,114,size_t)
- #endif

meta/recipes-devtools/syslinux/files/libinstaller-Avoid-using-linux-ext2_fs.h.patch deleted +0 -36

-
- #include <linux/loop.h>
-
-+#endif /* __linux__ */
-+
- #endif /* LIBINSTALLER_LINUXIOCTL_H */
-Index: syslinux-4.03/libinstaller/**syslxcom.c
-=============================**==============================**========
---- syslinux-4.03.orig/**libinstaller/syslxcom.c
-+++ syslinux-4.03/libinstaller/**syslxcom.c
-@@ -121,9 +121,9 @@ void clear_attributes(int fd)
-       {
-           int flags;
-
--          if (!ioctl(fd, EXT2_IOC_GETFLAGS, &flags)) {
--              flags &= ~EXT2_IMMUTABLE_FL;
--              ioctl(fd, EXT2_IOC_SETFLAGS, &flags);
-+          if (!ioctl(fd, FS_IOC_GETFLAGS, &flags)) {
-+              flags &= ~FS_IMMUTABLE_FL;
-+              ioctl(fd, FS_IOC_SETFLAGS, &flags);
-           }
-           break;
-       }
-@@ -151,9 +151,9 @@ void set_attributes(int fd)
-       {
-           int flags;
-
--          if (st.st_uid == 0 && !ioctl(fd, EXT2_IOC_GETFLAGS, &flags)) {
--              flags |= EXT2_IMMUTABLE_FL;
--              ioctl(fd, EXT2_IOC_SETFLAGS, &flags);
-+          if (st.st_uid == 0 && !ioctl(fd, FS_IOC_GETFLAGS, &flags)) {
-+              flags |= FS_IMMUTABLE_FL;
-+              ioctl(fd, FS_IOC_SETFLAGS, &flags);
-           }
-           break;
-       }

meta/recipes-devtools/**syslinux/files/no-strip.patch deleted +0 -15

deleted file mode 100644
index 775851a..0000000
@@ -1,31 +0,0 @@
-Disable stripping of binaries
-
-We don't want to strip these as this is handled separately at package
-time.
-
-Upstream-Status: Inappropriate [configuration]
-
-Signed-off-by: Paul Eggleton <[email protected]**>
-
---- syslinux-4.03.orig/mtools/**Makefile
-+++ syslinux-4.03/mtools/Makefile
-@@ -4,7 +4,7 @@ include $(topdir)/MCONFIG
- OPTFLAGS = -g -Os
- INCLUDES = -I. -I.. -I../libfat -I../libinstaller
- CFLAGS         = $(GCCWARN) -D_FILE_OFFSET_BITS=64 $(OPTFLAGS)

$(INCLUDES)
--LDFLAGS = -s
-+LDFLAGS =

meta/recipes-devtools/**syslinux/files/no-strip.patch deleted +0 -14

-
- SRCS     = syslinux.c \
-          ../libinstaller/fat.c \
---- syslinux-4.03.orig/utils/**Makefile
-+++ syslinux-4.03/utils/Makefile
-@@ -18,7 +18,7 @@ topdir = ..
- include $(topdir)/MCONFIG
-
- CFLAGS   = $(GCCWARN) -Os -fomit-frame-pointer -D_FILE_OFFSET_BITS=64
--LDFLAGS  = -O2 -s
-+LDFLAGS  = -O2
-
- TARGETS        = mkdiskimage isohybrid gethostip memdiskfind
- TARGETS += isohybrid.pl  # about to be obsoleted

(quoted diff) +0 -0

**syslinux/syslinux_4.03.bb
deleted file mode 100644
index 7c3ecda..0000000

meta/recipes-devtools/**syslinux/syslinux_4.03.bb deleted +0 -4

@@ -1,65 +0,0 @@
-DESCRIPTION = "A multi-purpose linux bootloader"
-HOMEPAGE = "http://syslinux.zytor.com/"
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=**0636e73ff0215e8d672dc4c32c317b*

*b3 \
- file://README;beginline=28;**endline=34;md5=**
a4607efd4a6392017186d08099e7d5**46"

meta/recipes-devtools/**syslinux/syslinux_4.03.bb deleted +0 -7

-
-# If you really want to run syslinux, you need mtools.  We just want the
-# ldlinux.* stuff for now, so skip mtools-native
-DEPENDS = "nasm-native"
-PR = "r9"
-
-SRC_URI = "${KERNELORG_MIRROR}/linux/**utils/boot/syslinux/4.xx/**syslinux-${PV}.tar.bz2

\

meta/recipes-devtools/**syslinux/syslinux_4.03.bb deleted +0 -6

-           file://cross-build.patch \
-           file://no-strip.patch \
-           file://libinstaller-Avoid-**using-linux-ext2_fs.h.patch"
-
-SRC_URI[md5sum] = "**a7ca38a0a5786b6efae8fb01a1ae80**70"
-SRC_URI[sha256sum] = "**c65567e324f9d1f7f794ae8f9578a0**

292bbd47d7b8d895a004d2f0152d0b**da38"

meta/recipes-devtools/**syslinux/syslinux_4.03.bb deleted +0 -33

-
-COMPATIBLE_HOST = '(x86_64|i.86).*-(linux|**freebsd.*)'
-
-EXTRA_OEMAKE = " \
-       BINDIR=${bindir} SBINDIR=${sbindir} LIBDIR=${libdir} \
-       DATADIR=${datadir} MANDIR=${mandir} INCDIR=${includedir} \
-"
-# syslinux uses $LD for linking, strip `-Wl,' so it can work
-export LDFLAGS = "`echo $LDFLAGS | sed 's/-Wl,//g'`"
-
-do_configure() {
-       # drop win32 targets or build fails
-       sed -e 's,win32/\S*,,g' -i Makefile
-
-       # clean installer executables included in source tarball
-       oe_runmake clean
-}
-
-do_compile() {
-       # Rebuild only the installer; keep precompiled bootloaders
-       # as per author's request (doc/distrib.txt)
-       oe_runmake CC="${CC}" installer
-}
-
-do_install() {
-       oe_runmake install INSTALLROOT="${D}"
-
-       install -d ${D}${libdir}/syslinux/
-       install -m 644 ${S}/core/ldlinux.sys ${D}${libdir}/syslinux/
-       install -m 644 ${S}/core/ldlinux.bss ${D}${libdir}/syslinux/
-}
-
-PACKAGES += "${PN}-extlinux ${PN}-mbr ${PN}-chain ${PN}-pxelinux

${PN}-isolinux ${PN}-misc"

meta/recipes-devtools/**syslinux/syslinux_4.03.bb deleted +0 -10

-
-RDEPENDS_${PN} += "mtools"
-
-FILES_${PN} = "${bindir}/syslinux"
-FILES_${PN}-extlinux = "${sbindir}/extlinux"
-FILES_${PN}-mbr = "${libdir}/${BPN}/mbr.bin"
-FILES_${PN}-chain = "${libdir}/${BPN}/chain.c32"
-FILES_${PN}-isolinux = "${libdir}/${BPN}/isolinux.**bin"
-FILES_${PN}-pxelinux = "${libdir}/${BPN}/pxelinux.0"
-FILES_${PN}-dev += "${datadir}/${BPN}/com32/lib*$**{SOLIBS}

${datadir}/${BPN}/com32/**include ${datadir}/${BPN}/com32/com32.**ld" -FILES_${PN}-staticdev += "${datadir}/${BPN}/com32/lib*.**a ${libdir}/${BPN}/com32/lib*.a"

meta/recipes-devtools/**syslinux/syslinux_4.03.bb deleted +0 -3

-FILES_${PN}-misc = "${libdir}/${BPN}/* ${bindir}/*"
-
-BBCLASSEXTEND = "native"

(quoted diff) +0 -0

**syslinux/syslinux_4.06.bb
new file mode 100644
index 0000000..a30a4a3

meta/recipes-devtools/**syslinux/syslinux_4.06.bb new file +4 -0

@@ -0,0 +1,62 @@
+DESCRIPTION = "A multi-purpose linux bootloader"
+HOMEPAGE = "http://syslinux.zytor.com/"
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=**0636e73ff0215e8d672dc4c32c317b*

*b3 \
+ file://README;beginline=35;**endline=41;md5=**
f7249a750bc692d1048b2626752aa4**15"

meta/recipes-devtools/**syslinux/syslinux_4.06.bb new file +7 -0

+
+# If you really want to run syslinux, you need mtools.  We just want the
+# ldlinux.* stuff for now, so skip mtools-native
+DEPENDS = "nasm-native util-linux"
+PR = "r0"
+
+SRC_URI = "${KERNELORG_MIRROR}/linux/**utils/boot/syslinux/4.xx/**

syslinux-${PV}.tar.bz2"

meta/recipes-devtools/**syslinux/syslinux_4.06.bb new file +3 -0

+
+SRC_URI[md5sum] = "**0384ef35b724615074e77b1fc89d5b**47"
+SRC_URI[sha256sum] = "**dbb7774e36c4596de68fa5e6788ad5**

7809ab31a1760e5d7626e697766d30**ad26"

meta/recipes-devtools/**syslinux/syslinux_4.06.bb new file +33 -0

+
+COMPATIBLE_HOST = '(x86_64|i.86).*-(linux|**freebsd.*)'
+
+EXTRA_OEMAKE = " \
+       BINDIR=${bindir} SBINDIR=${sbindir} LIBDIR=${libdir} \
+       DATADIR=${datadir} MANDIR=${mandir} INCDIR=${includedir} \
+"
+# syslinux uses $LD for linking, strip `-Wl,' so it can work
+export LDFLAGS = "`echo $LDFLAGS | sed 's/-Wl,//g'`"
+
+do_configure() {
+       # drop win32 targets or build fails
+       sed -e 's,win32/\S*,,g' -i Makefile
+
+       # clean installer executables included in source tarball
+       oe_runmake clean
+}
+
+do_compile() {
+       # Rebuild only the installer; keep precompiled bootloaders
+       # as per author's request (doc/distrib.txt)
+       oe_runmake CC="${CC} -isystem ${STAGING_INCDIR}" installer
+}
+
+do_install() {
+       oe_runmake install INSTALLROOT="${D}"
+
+       install -d ${D}${libdir}/syslinux/
+       install -m 644 ${S}/core/ldlinux.sys ${D}${libdir}/syslinux/
+       install -m 644 ${S}/core/ldlinux.bss ${D}${libdir}/syslinux/
+}
+
+PACKAGES += "${PN}-extlinux ${PN}-mbr ${PN}-chain ${PN}-pxelinux

${PN}-isolinux ${PN}-misc"

meta/recipes-devtools/**syslinux/syslinux_4.06.bb new file +10 -0

+
+RDEPENDS_${PN} += "mtools"
+
+FILES_${PN} = "${bindir}/syslinux"
+FILES_${PN}-extlinux = "${sbindir}/extlinux"
+FILES_${PN}-mbr = "${datadir}/${BPN}/mbr.bin"
+FILES_${PN}-chain = "${datadir}/${BPN}/chain.c32"
+FILES_${PN}-isolinux = "${datadir}/${BPN}/isolinux.**bin"
+FILES_${PN}-pxelinux = "${datadir}/${BPN}/pxelinux.0"
+FILES_${PN}-dev += "${datadir}/${BPN}/com32/lib*$**{SOLIBS}

${datadir}/${BPN}/com32/**include ${datadir}/${BPN}/com32/com32.**ld" +FILES_${PN}-staticdev += "${datadir}/${BPN}/com32/lib*.**a ${libdir}/${BPN}/com32/lib*.a"

meta/recipes-devtools/**syslinux/syslinux_4.06.bb new file +3 -0

+FILES_${PN}-misc = "${datadir}/${BPN}/* ${libdir}/${BPN}/* ${bindir}/*"
+
+BBCLASSEXTEND = "native"