MIPS: xburst: use common serial code
This commit series moves the UART code for Ingenic SoCs from board level to machine level. So the code can be reused for different boards or even different Ingenic SoCs.
[PATCH 1/2] MIPS: xburst: use common serial code
[PATCH 2/2] MIPS: rzx50: switch to common mach-xburst serial code
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
PATCH 1/2 MIPS: xburst: use common serial code
The Ingenic JZ4740, JZ4755 and JZ4770 SoCs use the same IP core for UART interface. This IP core is NS16550-compatible, but it needs small workaround.
This commit moves the UART code for Ingenic SoCs
from board level to machine level. So the code
can be reused for different boards or even
different SoCs.
--- arch/mips/mach-xburst/Makefile | 1 + arch/mips/mach-xburst/include/mach/devices.h | 8 ++++ arch/mips/mach-xburst/serial.c | 60 ++++++++++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 arch/mips/mach-xburst/include/mach/devices.h create mode 100644 arch/mips/mach-xburst/serial.c
arch/mips/mach-xburst/Makefile +1 -0
@@ -1 +1,2 @@ +obj-y += serial.o obj-$(CONFIG_CPU_JZ4755) += csrc-jz4750.o reset-jz4750.o
arch/mips/mach-xburst/include/mach/devices.h new file +8 -0
@@ -0,0 +1,8 @@ +#ifndef __MACH_XBURST_DEVICES_H +#define __MACH_XBURST_DEVICES_H + +#include <driver.h> + +struct device_d *jz_add_uart (int id,unsigned long base,unsigned int clock); + +#endif /* __MACH_XBURST_DEVICES_H */
arch/mips/mach-xburst/serial.c new file +60 -0
60 lines not on this page · raw message
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 2/2 MIPS: rzx50: switch to common mach-xburst serial code
In reply to Antony Pavlov--- arch/mips/boards/rzx50/serial.c | 37 ++----------------------------------- 1 file changed, 2 insertions(+), 35 deletions(-)
arch/mips/boards/rzx50/serial.c +2 -35
@@ -16,47 +16,14 @@*/ #include <common.h> -#include <types.h> -#include <driver.h> #include <init.h> -#include <ns16550.h> +#include <mach/devices.h> #include <mach/jz4750d_regs.h> -#include <io.h> -#include <asm/common.h> - -#define JZ4750D_UART_SHIFT 2 - -#define ier (1 << JZ4750D_UART_SHIFT) -#define fcr (2 << JZ4750D_UART_SHIFT) - -static void jz4750d_serial_reg_write (unsigned int val,unsigned long base, -unsigned char reg_offset) -{ -switch (reg_offset) { -case fcr: - val |=0x10 ;/* Enable uart module */ -break ; -case ier: - val |= (val &0x4 ) <<2 ; -break ; -default : -break ; - } - -writeb (val &0xff , (void *)(base + reg_offset)); -} - -static struct NS16550_plat serial_plat = { - .clock =12000000 , - .shift =JZ4750D_UART_SHIFT , - .reg_write = &jz4750d_serial_reg_write, -};static int rzx50_console_init (void ) {/* Register the serial port */ -add_ns16550_device (DEVICE_ID_DYNAMIC ,UART1_BASE ,8 <<JZ4750D_UART_SHIFT , -IORESOURCE_MEM_8BIT , &serial_plat); +jz_add_uart (DEVICE_ID_DYNAMIC ,UART1_BASE ,12000000 );return 0 ; }
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
AppliedQuoted 7 lines · Antony Pavlov
This commit series moves the UART code for Ingenic SoCs from board level to machine level. So the code can be reused for different boards or even different Ingenic SoCs.
[PATCH 1/2] MIPS: xburst: use common serial code
[PATCH 2/2] MIPS: rzx50: switch to common mach-xburst serial code
Applied, thanks
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox