Skip to contentSkip to conversation

Wi6210: Added TSO support

PATCH In review [email protected] 1 participant 1 message May 8, 2013 Wilocity WIL6210 wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 3/3 Wi6210: Added TSO support

From: Erez Kirshenbaum <erezk@wilocitycom>

Added TCP offloading support in TX. The 1st descriptor holds the TCP/IP header used as a pattern for all packets. Large send data is assigned to descriptors, each chain has MPDU size. The header descriptor does not have a valid DU value so we ignore it in tx_complete. Due to hardware design the first data descriptor has increased number of descriptors which compensates the header descriptor.

---
 drivers/net/wireless/ath/wil6210/netdev.c  |   3 +-
 drivers/net/wireless/ath/wil6210/txrx.c    | 248 +++++++++++++++++++++++++++--
 drivers/net/wireless/ath/wil6210/wil6210.h |   2 +-
 3 files changed, 241 insertions(+), 12 deletions(-)
drivers/net/wireless/ath/wil6210/netdev.c +2 -1
index b294729..8449b78 100644
@@ -100,7 +100,8 @@ void *wil_if_alloc(struct device *dev, void __iomem *csr)
 
 	ndev->netdev_ops = &wil_netdev_ops;
 	ndev->ieee80211_ptr = wdev;
-	ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM | NETIF_F_SG;
+	ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
+		NETIF_F_SG | NETIF_F_TSO;
 	ndev->features |= NETIF_F_HW_CSUM | NETIF_F_RXCSUM | NETIF_F_SG;
 	SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
 	wdev->netdev = ndev;
drivers/net/wireless/ath/wil6210/txrx.c +238 -10

294 lines not on this page · raw message

drivers/net/wireless/ath/wil6210/wil6210.h +1 -1
index 8f76ecd..6884c45 100644
@@ -35,7 +35,7 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
 #define WIL6210_MEM_SIZE (2*1024*1024UL)
 
 #define WIL6210_RX_RING_SIZE (128)
-#define WIL6210_TX_RING_SIZE (128)
+#define WIL6210_TX_RING_SIZE (512)
 #define WIL6210_MAX_TX_RINGS (24)
 
 /* Hardware definitions begin */
Signature · 1 line
1.7.11.7