cfg80211: Userspace may inform kernel of mesh auth method.
Subsystems (2)
PATCH v3 1/2 cfg80211: Userspace may inform kernel of mesh auth method.
Authentication takes place in userspace, but the beacon is generated in the kernel. Allow userspace to inform the kernel of the authentication method so the appropriate mesh config IE can be set prior to beacon generation when joining the MBSS.
---
If user_mpm is set, allow userspace to set authentication bit. (Johannes)
include/net/cfg80211.h | 2 ++ include/uapi/linux/nl80211.h | 5 +++++ net/wireless/mesh.c | 1 + net/wireless/nl80211.c | 8 ++++++++ 4 files changed, 16 insertions(+)
include/net/cfg80211.h +2 -0
@@ -1161,6 +1161,7 @@ struct mesh_config {* @sync_method: which synchronization method to use * @path_sel_proto: which path selection protocol to use * @path_metric: which metric to use +* @auth_id: which authentication method this mesh is using * @ie: vendor information elements (optional) * @ie_len: length of vendor information elements * @is_authenticated: this mesh requires authentication
@@ -1179,6 +1180,7 @@ struct mesh_setup {u8 sync_method;u8 path_sel_proto;u8 path_metric; +u8 auth_id;const u8 *ie;u8 ie_len;bool is_authenticated;
include/uapi/linux/nl80211.h +5 -0
@@ -2645,6 +2645,10 @@ enum nl80211_meshconf_params {* @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will * implement an MPM which handles peer allocation and state. * +* @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication +* method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). +* Default is no authentication method required. +* * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
@@ -2658,6 +2662,7 @@ enum nl80211_mesh_setup_params {NL80211_MESH_SETUP_USERSPACE_AMPE ,NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC ,NL80211_MESH_SETUP_USERSPACE_MPM , +NL80211_MESH_SETUP_AUTH_PROTOCOL ,/* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
net/wireless/mesh.c +1 -0
@@ -82,6 +82,7 @@ const struct mesh_setup default_mesh_setup = { .sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET, .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP, .path_metric = IEEE80211_PATH_METRIC_AIRTIME, + .auth_id = 0, /* open */ .ie = NULL, .ie_len = 0, .is_secure = false,
net/wireless/nl80211.c +8 -0
@@ -4672,6 +4672,7 @@ static const struct nla_policy [NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL] = { .type = NLA_U8 }, [NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 }, [NL80211_MESH_SETUP_USERSPACE_AUTH] = { .type = NLA_FLAG }, + [NL80211_MESH_SETUP_AUTH_PROTOCOL] = { .type = NLA_U8 }, [NL80211_MESH_SETUP_USERSPACE_MPM] = { .type = NLA_FLAG }, [NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY, .len = IEEE80211_MAX_DATA_LEN },
@@ -4857,6 +4858,13 @@ static int nl80211_parse_mesh_setup(struct genl_info *info,if (setup->is_secure) setup->user_mpm = true; +if (tb[NL80211_MESH_SETUP_AUTH_PROTOCOL ]) { +if (!setup->user_mpm) +return -EINVAL ; + setup->auth_id = +nla_get_u8 (tb[NL80211_MESH_SETUP_AUTH_PROTOCOL ]); + } +return 0 ; }
Signature · 1 line
1.7.9.5
PATCH v3 2/2 mac80211: enable Auth Protocol Identifier on mesh config.
Previously the mesh_auth_id was disabled. Instead set the correct mesh authentication bit based on the mesh setup.
--- net/mac80211/cfg.c | 1 + net/mac80211/mesh.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
net/mac80211/cfg.c +1 -0
@@ -1746,6 +1746,7 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh, ifmsh->mesh_pp_id = setup->path_sel_proto; ifmsh->mesh_pm_id = setup->path_metric; ifmsh->user_mpm = setup->user_mpm; + ifmsh->mesh_auth_id = setup->auth_id; ifmsh->security =IEEE80211_MESH_SEC_NONE ;if (setup->is_authenticated) ifmsh->security |=IEEE80211_MESH_SEC_AUTHED ;
net/mac80211/mesh.c +0 -1
@@ -748,7 +748,6 @@ int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)ieee80211_configure_filter (local); ifmsh->mesh_cc_id =0 ;/* Disabled */ - ifmsh->mesh_auth_id =0 ;/* Disabled */ /* register sync ops from extensible synchronization framework */ ifmsh->sync_ops =ieee80211_mesh_sync_ops_get (ifmsh->mesh_sp_id); ifmsh->adjusting_tbtt = false;
Signature · 1 line
1.7.9.5
Quoted 5 lines · Colleen Twitty
Authentication takes place in userspace, but the beacon is generated in the kernel. Allow userspace to inform the kernel of the authentication method so the appropriate mesh config IE can be set prior to beacon generation when joining the MBSS.
Applied, thanks.
johannes