mtd: fsl_ifc_nand: set NAND_NO_SUBPAGE_WRITE
Subsystems (2)
PATCH 1/1 mtd: fsl_ifc_nand: set NAND_NO_SUBPAGE_WRITE
This controller only does ECC on full-page accesses, even though the ECC consists of multiple steps. fsl_elbc_nand can get away with this because the ECC of an all-0xff region will be all-0xff, but this is not true with the ECC algorithms used by IFC.
Signed-off-by Scott Wood <[email protected]>
--- drivers/mtd/nand/fsl_ifc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mtd/nand/fsl_ifc_nand.c +1 -1
@@ -823,7 +823,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)/* set up nand options */ chip->bbt_options =NAND_BBT_USE_FLASH ; - + chip->options =NAND_NO_SUBPAGE_WRITE ;if (ioread32be (&ifc->cspr_cs[priv->bank].cspr) &CSPR_PORT_SIZE_16 ) { chip->read_byte = fsl_ifc_read_byte16;
Signature · 1 line
1.7.9.5
Artem Bityutskiy
AppliedQuoted 6 lines · Scott Wood
This controller only does ECC on full-page accesses, even though the ECC consists of multiple steps.
fsl_elbc_nandcan get away with this because the ECC of an all-0xff region will be all-0xff, but this is not true with the ECC algorithms used by IFC.Signed-off-by Scott Wood <[email protected]>
Pushed to l2-mtd.git, thanks!
Signature · 2 lines
Best Regards, Artem Bityutskiy