Skip to contentSkip to conversation

tegra20: add Colibri T20 on Iris

PATCH In review Lucas Stach 2 participants 3 messages May 10, 2013 – May 12, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 tegra20: add Colibri T20 on Iris

This adds the initial devicetree files for the Colibri T20 module on an Iris carrier board.

---
 arch/arm/dts/tegra20-colibri-iris.dts |  38 +++++++
 arch/arm/dts/tegra20-colibri.dtsi     | 190 ++++++++++++++++++++++++++++++++++
 2 files changed, 228 insertions(+)
 create mode 100644 arch/arm/dts/tegra20-colibri-iris.dts
 create mode 100644 arch/arm/dts/tegra20-colibri.dtsi
arch/arm/dts/tegra20-colibri-iris.dts new file +38 -0
new file mode 100644
index 0000000..b3e187e
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "tegra20-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T20 on Iris";
+	compatible = "toradex,iris", "toradex,colibri-t20", "nvidia,tegra20";
+
+	host1x {
+		hdmi {
+			status = "okay";
+		};
+	};
+
+	pinmux {
+		state_default: pinmux {
+			hdint {
+				nvidia,tristate = <0>;
+			};
+
+			i2cddc {
+				nvidia,tristate = <0>;
+			};
+
+			sdio4 {
+				nvidia,tristate = <0>;
+			};
+
+			uarta {
+				nvidia,tristate = <0>;
+			};
+
+			uartd {
+				nvidia,tristate = <0>;
+			};
+		};
+	};
+};
arch/arm/dts/tegra20-colibri.dtsi new file +190 -0

190 lines not on this page · raw message

Signature · 7 lines
1.8.1.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#1 lore raw

Am Freitag, den 10.05.2013, 21:32 +0200 schrieb Lucas Stach:

Quoted 16 lines

This adds the initial devicetree files for the Colibri T20 module on an Iris carrier board.

---
 arch/arm/dts/tegra20-colibri-iris.dts |  38 +++++++
 arch/arm/dts/tegra20-colibri.dtsi     | 190 ++++++++++++++++++++++++++++++++++
 2 files changed, 228 insertions(+)
 create mode 100644 arch/arm/dts/tegra20-colibri-iris.dts
 create mode 100644 arch/arm/dts/tegra20-colibri.dtsi
arch/arm/dts/tegra20-colibri-iris.dts new file +0 -0
new file mode 100644
index 0000000..b3e187e

[...]

arch/arm/dts/tegra20-colibri-iris.dts line 14

Quoted 6 lines
arch/arm/dts/tegra20-colibri-iris.dts new file +6 -0
+	host1x {
+		hdmi {
+			status = "okay";
+		};
+	};
+

Oops, this hunk should not be in this patch. Damn you, copy-pasta. [...]

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#2 lore raw
In reply to Lucas Stach

Hi Lucas,

Quoted 4 lines · Lucas Stach

This adds the initial devicetree files for the Colibri T20 module on an Iris carrier board.

This (and the one before) do not compile since CONFIG_BUILTIN_DTB_NAME is empty. Until we find a way to build multiple images (I'm working on that) we still have to use one defconfig per board. With multiple images support we could have a single tegra defconfig and just append different dtbs and generate different board images from a single binary.

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox