Skip to contentSkip to conversation

sunxi-tools: new host/target package

PATCH New Carlo Caione 2 participants 4 messages May 13, 2013 – May 26, 2013 Arm/Allwinner sunXi SoC support

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 sunxi-tools: new host/target package

---
Changelog:
- Fix typos
- FIx package description
- Several changes to .mk file

---
 package/Config.in                  |  1 +
 package/Config.in.host             |  1 +
 package/sunxi-tools/Config.in      | 10 ++++++++++
 package/sunxi-tools/Config.in.host | 12 ++++++++++++
 package/sunxi-tools/sunxi-tools.mk | 37 +++++++++++++++++++++++++++++++++++++
 5 files changed, 61 insertions(+)
 create mode 100644 package/sunxi-tools/Config.in
 create mode 100644 package/sunxi-tools/Config.in.host
 create mode 100644 package/sunxi-tools/sunxi-tools.mk
package/Config.in +1 -0
index d980871..26440a5 100644
@@ -207,6 +207,7 @@ source "package/ntfs-3g/Config.in"
 source "package/squashfs/Config.in"
 source "package/squashfs3/Config.in"
 source "package/sshfs/Config.in"
+source "package/sunxi-tools/Config.in"
 source "package/unionfs/Config.in"
 source "package/xfsprogs/Config.in"
 endmenu
package/Config.in.host +1 -0
index 7c0dd20..54178ea 100644
@@ -10,6 +10,7 @@ source "package/mtools/Config.in.host"
 source "package/omap-u-boot-utils/Config.in.host"
 source "package/openocd/Config.in.host"
 source "package/sam-ba/Config.in.host"
+source "package/sunxi-tools/Config.in.host"
 source "package/uboot-tools/Config.in.host"
 
 endmenu
package/sunxi-tools/Config.in new file +10 -0
new file mode 100644
index 0000000..a085aeb
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_SUNXI_TOOLS
+	bool "sunxi nand-part"
+	depends on BR2_arm
+	help
+	  nand-part is part of sunxi-tools for Allwinner A10 (aka sun4i) and
+	  A13 (aka sun5i) based devices. It is a tool to repartition the
+	  internal NAND on sunxi devices.
+
+	  http://linux-sunxi.org/Sunxi-tools
+
package/sunxi-tools/Config.in.host new file +12 -0
new file mode 100644
index 0000000..b5e4193
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_HOST_SUNXI_TOOLS
+	bool "host sunxi-tools"
+	depends on BR2_arm
+	help
+	  Tools for Allwinner A10 (aka sun4i) and A13 (aka sun5i) based devices.
+	  This includes fex2bin  which can be used to compile .fex board definition
+	  files to the binary script.bin format required by the linux-sunxi kernel.
+	  These tools are specific for linux-sunxi kernel and do not apply to
+	  the mainline Linux kernel version.
+
+	  http://linux-sunxi.org/Sunxi-tools
+
package/sunxi-tools/sunxi-tools.mk new file +37 -0
new file mode 100644
index 0000000..a97dfcb
@@ -0,0 +1,37 @@
+#############################################################
+#
+# sunxi-tools
+#
+#############################################################
+
+SUNXI_TOOLS_VERSION = 3a94e721dd8d1e13d0b25da0a83463891e8e9ee0
+SUNXI_TOOLS_SITE = http://github.com/linux-sunxi/sunxi-tools/tarball/master
+SUNXI_TOOLS_LICENSE = GPLv2+
+SUNXI_TOOLS_LICENSE_FILES = COPYING
+HOST_SUNXI_TOOLS_DEPENDENCIES = host-libusb
+FEX2BIN = $(HOST_DIR)/usr/bin/fex2bin
+
+define HOST_SUNXI_TOOLS_BUILD_CMDS
+	$(HOST_MAKE_ENV) $(MAKE) $(HOST_CONFIGURE_OPTS) \
+		CFLAGS="$(HOST_CFLAGS) -std=c99 -D_POSIX_C_SOURCE=200112L -Iinclude/" \
+		-C $(@D)
+endef
+
+define HOST_SUNXI_TOOLS_INSTALL_CMDS
+	for i in fexc bin2fex fex2bin bootinfo fel pio; do \
+		$(INSTALL) -D -m 0755 $(@D)/$$i $(HOST_DIR)/usr/bin/$$i ; \
+	done
+endef
+
+define SUNXI_TOOLS_BUILD_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
+		CFLAGS="$(TARGET_CFLAGS) -std=c99 -D_POSIX_C_SOURCE=200112L -Iinclude/" \
+		-C $(@D) nand-part
+endef
+
+define SUNXI_TOOLS_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/nand-part $(TARGET_DIR)/usr/bin/nand-part
+endef
+
+$(eval $(generic-package))
+$(eval $(host-generic-package))
Signature · 1 line
1.8.2.3
#1 lore raw

PATCH 2/3 sunxi-boards: new package

---
Changelog:
- Improved package description
- Config.in rewritten
- Makefile rewritten

---
 package/Config.in                    |  1 +
 package/sunxi-boards/Config.in       | 19 +++++++++++++++++++
 package/sunxi-boards/sunxi-boards.mk | 17 +++++++++++++++++
 3 files changed, 37 insertions(+)
 create mode 100644 package/sunxi-boards/Config.in
 create mode 100644 package/sunxi-boards/sunxi-boards.mk
package/Config.in +1 -0
index 26440a5..7868c32 100644
@@ -218,6 +218,7 @@ source "package/b43-firmware/Config.in"
 source "package/firmware-imx/Config.in"
 source "package/linux-firmware/Config.in"
 source "package/rpi-firmware/Config.in"
+source "package/sunxi-boards/Config.in"
 source "package/ux500-firmware/Config.in"
 source "package/zd1211-firmware/Config.in"
 endmenu
package/sunxi-boards/Config.in new file +19 -0
new file mode 100644
index 0000000..27ee8fc
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_SUNXI_BOARDS
+	bool "sunxi script.bin board file"
+	select BR2_PACKAGE_HOST_SUNXI_TOOLS
+	help
+	  Sunxi-boards requires a compiled .fex files for hardware description,
+	  used by kernel during boot for hardware initialization. This package
+	  is specific for linux-sunxi kernel and it is useless for mainline
+	  kernel versions.
+
+	  https://github.com/linux-sunxi/sunxi-boards
+
+if BR2_PACKAGE_SUNXI_BOARDS
+config BR2_PACKAGE_SUNXI_BOARDS_BOARD_NAME
+	string "Board name"
+	help
+	  This field defines the name of the board for which the .bin
+	  files should be generated. See inside sys_config/a10 directory in
+	  sunxi-boards source code to see the list of valid board names.
+endif
package/sunxi-boards/sunxi-boards.mk new file +17 -0
new file mode 100644
index 0000000..1f52110
@@ -0,0 +1,17 @@
+#############################################################
+#
+# sunxi-boards
+#
+#############################################################
+
+SUNXI_BOARDS_VERSION = 88d663db44f65b73ef65c4148a28c6fa3665d2b6
+SUNXI_BOARDS_SITE = https://github.com/linux-sunxi/sunxi-boards/tarball/master
+SUNXI_BOARDS_DEPENDENCIES = host-sunxi-tools
+SUNXI_BOARDS_INSTALL_IMAGES = YES
+SUNXI_BOARDS_INSTALL_TARGET = NO
+
+define SUNXI_BOARDS_INSTALL_IMAGES_CMDS
+	$(FEX2BIN) $(@D)/sys_config/a10/$(BR2_PACKAGE_SUNXI_BOARDS_BOARD_NAME).fex $(BINARIES_DIR)/script.bin
+endef
+
+$(eval $(generic-package))
Signature · 1 line
1.8.2.3
#2 lore raw

PATCH 3/3 cubieboard: add support

In reply to Carlo Caione

---
Changelog:
- New readme.txt
- Small fixes in scripts
- New board name

---
 board/cubietech/cubieboard/boot.cmd       |   4 +
 board/cubietech/cubieboard/mkcubiecard.sh | 119 ++++++++++++++++++++++++++++++
 board/cubietech/cubieboard/post-build.sh  |  15 ++++
 board/cubietech/cubieboard/readme.txt     |  59 +++++++++++++++
 configs/cubieboard_defconfig              |  39 ++++++++++
 5 files changed, 236 insertions(+)
 create mode 100644 board/cubietech/cubieboard/boot.cmd
 create mode 100755 board/cubietech/cubieboard/mkcubiecard.sh
 create mode 100755 board/cubietech/cubieboard/post-build.sh
 create mode 100644 board/cubietech/cubieboard/readme.txt
 create mode 100644 configs/cubieboard_defconfig
board/cubietech/cubieboard/boot.cmd new file +4 -0
new file mode 100644
index 0000000..849ed00
@@ -0,0 +1,4 @@
+setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
+fatload mmc 0 0x43000000 script.bin
+fatload mmc 0 0x48000000 uImage
+bootm 0x48000000
board/cubietech/cubieboard/mkcubiecard.sh new file +119 -0

119 lines not on this page · raw message

board/cubietech/cubieboard/post-build.sh new file +15 -0
new file mode 100755
index 0000000..cd6675b
@@ -0,0 +1,15 @@
+#!/bin/sh
+# post-build.sh for CubieBoard
+# 2013, Carlo Caione <[email protected]>
+
+BOARD_DIR="$(dirname $0)"
+MKIMAGE=$HOST_DIR/usr/bin/mkimage
+BOOT_CMD=$BOARD_DIR/boot.cmd
+BOOT_CMD_H=$BINARIES_DIR/boot.scr
+
+# U-Boot script
+if [ -e $MKIMAGE -a -e $BOOT_CMD ];
+then
+	$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H
+fi
+
board/cubietech/cubieboard/readme.txt new file +59 -0

59 lines not on this page · raw message

configs/cubieboard_defconfig new file +39 -0
new file mode 100644
index 0000000..77806f6
@@ -0,0 +1,39 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a8=y
+
+# System configuration
+BR2_TARGET_GENERIC_HOSTNAME="Cubieboard"
+BR2_TARGET_GENERIC_ISSUE="Welcome to use Cubieboard!"
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard/post-build.sh"
+
+# Additional tools
+BR2_PACKAGE_HOST_SUNXI_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_SUNXI_TOOLS=y
+BR2_PACKAGE_SUNXI_BOARDS=y
+BR2_PACKAGE_SUNXI_BOARDS_BOARD_NAME="cubieboard"
+
+# Kernel headers
+BR2_KERNEL_HEADERS_3_4=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="274a66a7bfcbaabb88d63e4eba161965383cc416"
+BR2_LINUX_KERNEL_VERSION="sunxi-3.4"
+BR2_LINUX_KERNEL_DEFCONFIG="sun4i"
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="cubieboard"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="sunxi"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="https://github.com/linux-sunxi/u-boot-sunxi.git"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="1a8ac55429f7f8cc9f100c1cf2dc0195cf81e76f"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
Signature · 1 line
1.8.2.3
#3 lore raw

PATCH 1/3 sunxi-tools: new host/target package

In reply to Carlo Caione

Dear Carlo Caione,

Quoted 1 line · Carlo Caione

I've taken your 3 patches:

[PATCH 1/3] sunxi-tools: new host/target package
[PATCH 2/3] sunxi-boards: new package
[PATCH 3/3] cubieboard: add support

and applied them to my tree. I will post a pull request to Peter later today with those patches.

Best regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com