mfd: wm8994: Reset device during probe
Subsystems (2)
PATCH 1/1 mfd: wm8994: Reset device during probe
Ensure that the device is in a known good state. This should have little practical impact as the runtime PM will reset the device shortly after probe but it's neater.
Signed-off-by Mark Brown <[email protected]>
--- drivers/mfd/wm8994-core.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/mfd/wm8994-core.c +11 -0
@@ -652,6 +652,17 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)return ret; } +/* Explicitly put the device into reset in case regulators +* don't get disabled in order to ensure we know the device +* state. +*/ + ret =wm8994_reg_write (wm8994,WM8994_SOFTWARE_RESET , +wm8994_reg_read (wm8994,WM8994_SOFTWARE_RESET )); +if (ret !=0 ) { +dev_err (wm8994->dev,"Failed to reset device: %d\n" , ret); +return ret; + } +if (regmap_patch) { ret =regmap_register_patch (wm8994->regmap, regmap_patch, patch_regs);
Signature · 1 line
1.7.10.4
Samuel Ortiz
AppliedHi Mark,
Quoted 8 lines · Mark Brown
Ensure that the device is in a known good state. This should have little practical impact as the runtime PM will reset the device shortly after probe but it's neater.
Signed-off-by Mark Brown <[email protected]>--- drivers/mfd/wm8994-core.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
Applied, thanks.
Cheers,
Samuel.
Signature · 2 lines
Intel Open Source Technology Centre http://oss.intel.com/