Skip to contentSkip to conversation

net/wireless/mwifiex/pcie: Convert to dev_pm_ops from legacy pm ops

RFC PATCH In review Shuah Khan 2 participants 2 messages May 21, 2013

Subsystems (3)
lore
Share & tools
lore

Shuah Khan

author
#0 lore raw

RFC PATCH 1/1 net/wireless/mwifiex/pcie: Convert to dev_pm_ops from legacy pm ops

Convert the driver to use dev_pm_ops for power management and remove Legacy PM handling. This change re-uses existing suspend and resume interfaces for dev_pm_ops.

---

Rafael,

This is the first driver patch to convert drivers to use dev_pm_ops for power management. Please review for the approach and make suggestions for improvement.

thanks,
-- Shuah

 drivers/net/wireless/mwifiex/pcie.c |   33 +++++++++++++++++++++++++++------
 1 file changed, 27 insertions(+), 6 deletions(-)
drivers/net/wireless/mwifiex/pcie.c +27 -6
index 20c9c4c..a271c64 100644
@@ -85,7 +85,7 @@ static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter *adapter)
  * If already not suspended, this function allocates and sends a host
  * sleep activate request to the firmware and turns off the traffic.
  */
-static int mwifiex_pcie_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __mwifiex_pcie_suspend(struct pci_dev *pdev)
 {
 	struct mwifiex_adapter *adapter;
 	struct pcie_service_card *card;
@@ -112,6 +112,13 @@ static int mwifiex_pcie_suspend(struct pci_dev *pdev, pm_message_t state)
 	return 0;
 }
 
+static int mwifiex_pcie_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	return __mwifiex_pcie_suspend(pdev);
+}
+
 /*
  * Kernel needs to suspend all functions separately. Therefore all
  * registered functions must have drivers with suspend and resume
@@ -120,7 +127,7 @@ static int mwifiex_pcie_suspend(struct pci_dev *pdev, pm_message_t state)
  * If already not resumed, this function turns on the traffic and
  * sends a host sleep cancel request to the firmware.
  */
-static int mwifiex_pcie_resume(struct pci_dev *pdev)
+static int __mwifiex_pcie_resume(struct pci_dev *pdev)
 {
 	struct mwifiex_adapter *adapter;
 	struct pcie_service_card *card;
@@ -150,6 +157,13 @@ static int mwifiex_pcie_resume(struct pci_dev *pdev)
 
 	return 0;
 }
+
+static int mwifiex_pcie_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	return __mwifiex_pcie_resume(pdev);
+}
 #endif
 
 /*
@@ -213,7 +227,7 @@ static void mwifiex_pcie_remove(struct pci_dev *pdev)
 	if (user_rmmod) {
 #ifdef CONFIG_PM
 		if (adapter->is_suspended)
-			mwifiex_pcie_resume(pdev);
+			__mwifiex_pcie_resume(pdev);
 #endif
 
 		for (i = 0; i < adapter->priv_num; i++)
@@ -249,6 +263,13 @@ static DEFINE_PCI_DEVICE_TABLE(mwifiex_ids) = {
 
 MODULE_DEVICE_TABLE(pci, mwifiex_ids);
 
+#ifdef CONFIG_PM
+/* Power Management Hooks */
+static const struct dev_pm_ops mwifiex_pcie_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mwifiex_pcie_suspend, mwifiex_pcie_resume)
+};
+#endif
+
 /* PCI Device Driver */
 static struct pci_driver __refdata mwifiex_pcie = {
 	.name     = "mwifiex_pcie",
@@ -256,9 +277,9 @@ static struct pci_driver __refdata mwifiex_pcie = {
 	.probe    = mwifiex_pcie_probe,
 	.remove   = mwifiex_pcie_remove,
 #ifdef CONFIG_PM
-	/* Power Management Hooks */
-	.suspend  = mwifiex_pcie_suspend,
-	.resume   = mwifiex_pcie_resume,
+	.driver   = {
+		.pm = &mwifiex_pcie_pm_ops,
+	},
 #endif
 };
 
Signature · 1 line
1.7.10.4
Acked-by on v1 1/1
#1 lore raw

Hi Shuah,

Quoted 7 lines

Convert the driver to use dev_pm_ops for power management and remove Legacy PM handling. This change re-uses existing suspend and resume interfaces for dev_pm_ops.

Thanks,
Bing

Quoted 10 lines

---

Rafael,

This is the first driver patch to convert drivers to use dev_pm_ops for power management. Please review for the approach and make suggestions for improvement.

thanks,
-- Shuah