Skip to contentSkip to conversation

ab8540 cut2: new rtc second resolution

PATCH Applied Alexandre Torgue 2 participants 4 messages May 24, 2013 – May 28, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover ab8540 cut2: new rtc second resolution

From: Alexandre Torgue <[email protected]>

Android expects the RTC to have second resolution. On ab8540 cut2 RTC block has a new register which allows setting seconds for wakeup alarms.

Alexandre Torgue (2):
mfd: ab8540: add device for new rtc version on ab8540 cut2
rtc: ab8540: add second resolution to rtc driver

 drivers/mfd/ab8500-core.c         | 55 +++++++++++++++++++++++++++++-----
 drivers/rtc/rtc-ab8500.c          | 63 ++++++++++++++++++++++++++++++++++++++-
 include/linux/mfd/abx500/ab8500.h |  2 ++
 3 files changed, 111 insertions(+), 9 deletions(-)
Signature · 1 line
1.8.2.1
#1 lore raw

PATCH 1/2 mfd: ab8540: add device for new rtc version on ab8540 cut2

From: Alexandre Torgue <[email protected]>

AB8540 rtc have changed between AB8540_cut1 and AB8540_cut2.Different ressources to define for those two version.

drivers/mfd/ab8500-core.c +47 -8
index 42abd3a..6f22527 100644
@@ -650,6 +650,21 @@ static struct resource ab8500_rtc_resources[] = {
 	},
 };
 
+static struct resource ab8540_rtc_resources[] = {
+	{
+		.name	= "1S",
+		.start	= AB8540_INT_RTC_1S,
+		.end	= AB8540_INT_RTC_1S,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "ALARM",
+		.start	= AB8500_INT_RTC_ALARM,
+		.end	= AB8500_INT_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct resource ab8500_poweronkey_db_resources[] = {
 	{
 		.name	= "ONKEY_DBF",
@@ -1284,11 +1299,6 @@ static struct mfd_cell ab8540_devs[] = {
 		.resources = ab8505_gpadc_resources,
 	},
 	{
-		.name = "ab8500-rtc",
-		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
-		.resources = ab8500_rtc_resources,
-	},
-	{
 		.name = "ab8500-acc-det",
 		.num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
 		.resources = ab8500_av_acc_detect_resources,
@@ -1328,6 +1338,24 @@ static struct mfd_cell ab8540_devs[] = {
 	},
 };
 
+static struct mfd_cell ab8540_cut1_devs[] = {
+	{
+		.name = "ab8500-rtc",
+		.of_compatible = "stericsson,ab8500-rtc",
+		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+		.resources = ab8500_rtc_resources,
+	},
+};
+
+static struct mfd_cell ab8540_cut2_devs[] = {
+	{
+		.name = "ab8540-rtc",
+		.of_compatible = "stericsson,ab8540-rtc",
+		.num_resources = ARRAY_SIZE(ab8540_rtc_resources),
+		.resources = ab8540_rtc_resources,
+	},
+};
+
 static ssize_t show_chip_id(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
@@ -1731,11 +1759,22 @@ static int ab8500_probe(struct platform_device *pdev)
 		ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
 				ARRAY_SIZE(ab9540_devs), NULL,
 				ab8500->irq_base, ab8500->domain);
-	else if (is_ab8540(ab8500))
+	else if (is_ab8540(ab8500)) {
 		ret = mfd_add_devices(ab8500->dev, 0, ab8540_devs,
 			      ARRAY_SIZE(ab8540_devs), NULL,
-			      ab8500->irq_base, ab8500->domain);
-	else if (is_ab8505(ab8500))
+			      ab8500->irq_base, NULL);
+		if (ret)
+			return ret;
+
+		if (is_ab8540_1p2_or_earlier(ab8500))
+			ret = mfd_add_devices(ab8500->dev, 0, ab8540_cut1_devs,
+			      ARRAY_SIZE(ab8540_cut1_devs), NULL,
+			      ab8500->irq_base, NULL);
+		else /* ab8540 >= cut2 */
+			ret = mfd_add_devices(ab8500->dev, 0, ab8540_cut2_devs,
+			      ARRAY_SIZE(ab8540_cut2_devs), NULL,
+			      ab8500->irq_base, NULL);
+	} else if (is_ab8505(ab8500))
 		ret = mfd_add_devices(ab8500->dev, 0, ab8505_devs,
 			      ARRAY_SIZE(ab8505_devs), NULL,
 			      ab8500->irq_base, ab8500->domain);
include/linux/mfd/abx500/ab8500.h +2 -0
index fb1bf7d..e330ad3 100644
@@ -291,6 +291,8 @@ enum ab8500_version {
 #define AB8540_INT_FSYNC2R		213
 #define AB8540_INT_BITCLK2F		214
 #define AB8540_INT_BITCLK2R		215
+/* ab8540_irq_regoffset[27] -> IT[Source|Latch|Mask]33 */
+#define AB8540_INT_RTC_1S		216
 
 /*
  * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
Signature · 1 line
1.8.2.1
Applied
#2 lore raw

Re: [PATCH 1/2] mfd: ab8540: add device for new rtc version on ab8540 cut2

Quoted 10 lines · Alexandre Torgue

From: Alexandre Torgue <[email protected]>

AB8540 rtc have changed between AB8540_cut1 and AB8540_cut2.Different ressources to define for those two version.

Applied, thanks.

Signature · 4 lines
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#3 lore raw

PATCH 2/2 rtc: ab8540: add second resolution to rtc driver

In reply to Alexandre Torgue

From: Alexandre Torgue <[email protected]>

Android expects the RTC to have second resolution. On ab8540 cut2 RTC block has a new register which allows setting seconds for wakeup alarms.

Existing registers (minutes hi, mid and low) have seen their offsets changed. Here is the new mapping:

  * AlarmSec     (A) 0x22
  * AlarmMinLow  (M) from 0x8 to 0x23
  * AlarmMinMid  (M) from 0x9 to 0x24

* AlarmMinHigh (M) from 0xA to 0x25

drivers/rtc/rtc-ab8500.c +62 -1
index 63cfa31..4de5cd9 100644
@@ -35,6 +35,10 @@
 #define AB8500_RTC_FORCE_BKUP_REG	0x0D
 #define AB8500_RTC_CALIB_REG		0x0E
 #define AB8500_RTC_SWITCH_STAT_REG	0x0F
+#define AB8540_RTC_ALRM_SEC		0x22
+#define AB8540_RTC_ALRM_MIN_LOW_REG	0x23
+#define AB8540_RTC_ALRM_MIN_MID_REG	0x24
+#define AB8540_RTC_ALRM_MIN_HI_REG	0x25
 
 /* RtcReadRequest bits */
 #define RTC_READ_REQUEST		0x01
@@ -58,6 +62,11 @@ static const u8 ab8500_rtc_alarm_regs[] = {
 	AB8500_RTC_ALRM_MIN_LOW_REG
 };
 
+static const u8 ab8540_rtc_alarm_regs[] = {
+	AB8540_RTC_ALRM_MIN_HI_REG, AB8540_RTC_ALRM_MIN_MID_REG,
+	AB8540_RTC_ALRM_MIN_LOW_REG, AB8540_RTC_ALRM_SEC
+};
+
 /* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
 static unsigned long get_elapsed_seconds(int year)
 {
@@ -267,6 +276,42 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	return ab8500_rtc_irq_enable(dev, alarm->enabled);
 }
 
+static int ab8540_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	int retval, i;
+	unsigned char buf[ARRAY_SIZE(ab8540_rtc_alarm_regs)];
+	unsigned long mins, secs = 0;
+
+	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
+		dev_dbg(dev, "year should be equal to or greater than %d\n",
+				AB8500_RTC_EPOCH);
+		return -EINVAL;
+	}
+
+	/* Get the number of seconds since 1970 */
+	rtc_tm_to_time(&alarm->time, &secs);
+
+	/*
+	 * Convert it to the number of seconds since 01-01-2000 00:00:00
+	 */
+	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
+	mins = secs / 60;
+
+	buf[3] = secs % 60;
+	buf[2] = mins & 0xFF;
+	buf[1] = (mins >> 8) & 0xFF;
+	buf[0] = (mins >> 16) & 0xFF;
+
+	/* Set the alarm time */
+	for (i = 0; i < ARRAY_SIZE(ab8540_rtc_alarm_regs); i++) {
+		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
+			ab8540_rtc_alarm_regs[i], buf[i]);
+		if (retval < 0)
+			return retval;
+	}
+
+	return ab8500_rtc_irq_enable(dev, alarm->enabled);
+}
 
 static int ab8500_rtc_set_calibration(struct device *dev, int calibration)
 {
@@ -389,8 +434,22 @@ static const struct rtc_class_ops ab8500_rtc_ops = {
 	.alarm_irq_enable	= ab8500_rtc_irq_enable,
 };
 
+static const struct rtc_class_ops ab8540_rtc_ops = {
+	.read_time		= ab8500_rtc_read_time,
+	.set_time		= ab8500_rtc_set_time,
+	.read_alarm		= ab8500_rtc_read_alarm,
+	.set_alarm		= ab8540_rtc_set_alarm,
+	.alarm_irq_enable	= ab8500_rtc_irq_enable,
+};
+
+static struct platform_device_id ab85xx_rtc_ids[] = {
+	{ "ab8500-rtc", (kernel_ulong_t)&ab8500_rtc_ops, },
+	{ "ab8540-rtc", (kernel_ulong_t)&ab8540_rtc_ops, },
+};
+
 static int ab8500_rtc_probe(struct platform_device *pdev)
 {
+	const struct platform_device_id *platid = platform_get_device_id(pdev);
 	int err;
 	struct rtc_device *rtc;
 	u8 rtc_ctrl;
@@ -423,7 +482,8 @@ static int ab8500_rtc_probe(struct platform_device *pdev)
 	device_init_wakeup(&pdev->dev, true);
 
 	rtc = devm_rtc_device_register(&pdev->dev, "ab8500-rtc",
-					&ab8500_rtc_ops, THIS_MODULE);
+				(struct rtc_class_ops *)platid->driver_data,
+				THIS_MODULE);
 	if (IS_ERR(rtc)) {
 		dev_err(&pdev->dev, "Registration failed\n");
 		err = PTR_ERR(rtc);
@@ -463,6 +523,7 @@ static struct platform_driver ab8500_rtc_driver = {
 	},
 	.probe	= ab8500_rtc_probe,
 	.remove = ab8500_rtc_remove,
+	.id_table = ab85xx_rtc_ids,
 };
 
 module_platform_driver(ab8500_rtc_driver);
Signature · 1 line
1.8.2.1