Skip to contentSkip to conversation

cfg80211: Allow TDLS peer AID to be configured for VHT

PATCH Superseded Jouni Malinen 2 participants 5 messages May 16, 2013 – Jun 11, 2013 802.11 (including cfg80211/NL80211)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 cfg80211: Allow TDLS peer AID to be configured for VHT

VHT uses peer AID in the PARTIAL_AID field in TDLS frames. The current design for TDLS is to first add a dummy STA entry before completing TDLS Setup and then update information on this STA entry based on what was received from the peer during the setup exchange.

In theory, this could use NL80211_ATTR_STA_AID to set the peer AID just like this is used in AP mode to set the AID of an association station. However, existing cfg80211 validation rules prevent this attribute from being used with set_station operation. To avoid interoperability issues between different kernel and user space version combinations, introduce a new nl80211 attribute for the purpose of setting TDLS peer AID. This attribute can be used in both the new_station and set_station operations. It is not supposed to be allowed to change the AID value during the lifetime of the STA entry, but that validation is left for drivers to do in the change_station callback.

---
 include/uapi/linux/nl80211.h |    7 +++++++
 net/wireless/nl80211.c       |   11 +++++++++--
 2 files changed, 16 insertions(+), 2 deletions(-)
include/uapi/linux/nl80211.h +7 -0
index d1e48b5..a061437 100644
@@ -1429,6 +1429,11 @@ enum nl80211_commands {
  * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
  *      the connection should have increased reliability (u16).
  *
+ * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
+ *	This is similar to @NL80211_ATTR_STA_AID but with a difference of being
+ *	allowed to be used with the first @NL80211_CMD_SET_STATION command to
+ *	update a TDLS peer STA entry.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1727,6 +1732,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_CRIT_PROT_ID,
 	NL80211_ATTR_MAX_CRIT_PROT_DURATION,
 
+	NL80211_ATTR_PEER_AID,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
net/wireless/nl80211.c +9 -2
index afa2838..1525040 100644
@@ -378,6 +378,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_MDID] = { .type = NLA_U16 },
 	[NL80211_ATTR_IE_RIC] = { .type = NLA_BINARY,
 				  .len = IEEE80211_MAX_DATA_LEN },
+	[NL80211_ATTR_PEER_AID] = { .type = NLA_U16 },
 };
 
 /* policy for the key attributes */
@@ -3834,6 +3835,8 @@ static int nl80211_set_station_tdls(struct genl_info *info,
 				    struct station_parameters *params)
 {
 	/* Dummy STA entry gets updated once the peer capabilities are known */
+	if (info->attrs[NL80211_ATTR_PEER_AID])
+		params->aid = nla_get_u16(info->attrs[NL80211_ATTR_PEER_AID]);
 	if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
 		params->ht_capa =
 			nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
@@ -3974,7 +3977,8 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	if (!info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES])
 		return -EINVAL;
 
-	if (!info->attrs[NL80211_ATTR_STA_AID])
+	if (!info->attrs[NL80211_ATTR_STA_AID] &&
+	    !info->attrs[NL80211_ATTR_PEER_AID])
 		return -EINVAL;
 
 	mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
@@ -3985,7 +3989,10 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	params.listen_interval =
 		nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
 
-	params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+	if (info->attrs[NL80211_ATTR_STA_AID])
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+	else
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_PEER_AID]);
 	if (!params.aid || params.aid > IEEE80211_MAX_AID)
 		return -EINVAL;
 
Signature · 5 lines
1.7.9.5


-- 
Jouni Malinen                                            PGP id EFC895FA
maintainer
#1 lore raw

net/wireless/nl80211.c static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) · line 3982

Quoted 4 lines · Jouni Malinen
net/wireless/nl80211.c +2 -1
-	if (!info->attrs[NL80211_ATTR_STA_AID])
+	if (!info->attrs[NL80211_ATTR_STA_AID] &&
+	    !info->attrs[NL80211_ATTR_PEER_AID])
 		return -EINVAL;

Technically here I think you could check that this attribute isn't used with non-TDLS stations, since in new_station you know what it's going to be, right?

net/wireless/nl80211.c static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) · line 3995

Quoted 9 lines
net/wireless/nl80211.c +4 -1
@@ -3985,7 +3989,10 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	params.listen_interval =
 		nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
 
-	params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+	if (info->attrs[NL80211_ATTR_STA_AID])
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+	else
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_PEER_AID]);

This is a bit strange? Wouldn't you want to prefer the new attribute, so you can put some possibly invalid value into the old attribute for old kernels? Otherwise what's the reason for even reading the new attribute in this code at all, if new userspace code must set the old attribute for old kernels anyway?

johannes

#2 lore raw
Quoted 10 lines · Johannes Berg

net/wireless/nl80211.c static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) · line 3982

Quoted 4 lines · Jouni Malinen
net/wireless/nl80211.c +2 -1
-	if (!info->attrs[NL80211_ATTR_STA_AID])
+	if (!info->attrs[NL80211_ATTR_STA_AID] &&
+	    !info->attrs[NL80211_ATTR_PEER_AID])
 		return -EINVAL;

Technically here I think you could check that this attribute isn't used with non-TDLS stations, since in new_station you know what it's going to be, right?

Well, in this function yes, but not this early.. I'll add validation for this within the iftype switch.

Quoted 4 lines
Quoted 4 lines
net/wireless/nl80211.c +2 -1
@@ -3985,7 +3989,10 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
-	params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+	if (info->attrs[NL80211_ATTR_STA_AID])
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
Quoted 8 lines

net/wireless/nl80211.c static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) · line 3995

Quoted 2 lines
net/wireless/nl80211.c +2 -0
+	else
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_PEER_AID]);

This is a bit strange? Wouldn't you want to prefer the new attribute, so you can put some possibly invalid value into the old attribute for old kernels? Otherwise what's the reason for even reading the new attribute in this code at all, if new userspace code must set the old attribute for old kernels anyway?

This was something to allow the new attribute to be taken into use if we ever get rid of the extra dummy STA for TDLS. I'd assume this ends up having to get a new capability flag, so wpa_supplicant could figure out which attribute to use. Anyway, I agree it makes more sense to reverse the order here to prefer _PEER_AID.

Signature · 1 line
Jouni Malinen                                            PGP id EFC895FA
#3 lore raw

PATCH v2 1/1 cfg80211: Allow TDLS peer AID to be configured for VHT

In reply to Johannes Berg

VHT uses peer AID in the PARTIAL_AID field in TDLS frames. The current design for TDLS is to first add a dummy STA entry before completing TDLS Setup and then update information on this STA entry based on what was received from the peer during the setup exchange.

In theory, this could use NL80211_ATTR_STA_AID to set the peer AID just like this is used in AP mode to set the AID of an association station. However, existing cfg80211 validation rules prevent this attribute from being used with set_station operation. To avoid interoperability issues between different kernel and user space version combinations, introduce a new nl80211 attribute for the purpose of setting TDLS peer AID. This attribute can be used in both the new_station and set_station operations. It is not supposed to be allowed to change the AID value during the lifetime of the STA entry, but that validation is left for drivers to do in the change_station callback.

---
 include/uapi/linux/nl80211.h |    7 +++++++
 net/wireless/nl80211.c       |   17 +++++++++++++----
 2 files changed, 20 insertions(+), 4 deletions(-)

v2:
- reject NL80211_ATTR_PEER_AID if not TDLS STA in nl80211_new_station()
- prefer NL80211_ATTR_PEER_AID in nl80211_new_station()

include/uapi/linux/nl80211.h +7 -0
index d1e48b5..a061437 100644
@@ -1429,6 +1429,11 @@ enum nl80211_commands {
  * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
  *      the connection should have increased reliability (u16).
  *
+ * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
+ *	This is similar to @NL80211_ATTR_STA_AID but with a difference of being
+ *	allowed to be used with the first @NL80211_CMD_SET_STATION command to
+ *	update a TDLS peer STA entry.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1727,6 +1732,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_CRIT_PROT_ID,
 	NL80211_ATTR_MAX_CRIT_PROT_DURATION,
 
+	NL80211_ATTR_PEER_AID,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
net/wireless/nl80211.c +13 -4
index dfdb5e6..2963b8d 100644
@@ -378,6 +378,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_MDID] = { .type = NLA_U16 },
 	[NL80211_ATTR_IE_RIC] = { .type = NLA_BINARY,
 				  .len = IEEE80211_MAX_DATA_LEN },
+	[NL80211_ATTR_PEER_AID] = { .type = NLA_U16 },
 };
 
 /* policy for the key attributes */
@@ -3834,6 +3835,8 @@ static int nl80211_set_station_tdls(struct genl_info *info,
 				    struct station_parameters *params)
 {
 	/* Dummy STA entry gets updated once the peer capabilities are known */
+	if (info->attrs[NL80211_ATTR_PEER_AID])
+		params->aid = nla_get_u16(info->attrs[NL80211_ATTR_PEER_AID]);
 	if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
 		params->ht_capa =
 			nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
@@ -3974,7 +3977,8 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	if (!info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES])
 		return -EINVAL;
 
-	if (!info->attrs[NL80211_ATTR_STA_AID])
+	if (!info->attrs[NL80211_ATTR_STA_AID] &&
+	    !info->attrs[NL80211_ATTR_PEER_AID])
 		return -EINVAL;
 
 	mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
@@ -3985,7 +3989,10 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	params.listen_interval =
 		nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
 
-	params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+	if (info->attrs[NL80211_ATTR_PEER_AID])
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_PEER_AID]);
+	else
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
 	if (!params.aid || params.aid > IEEE80211_MAX_AID)
 		return -EINVAL;
 
@@ -4037,7 +4044,8 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 			params.sta_modify_mask &= ~STATION_PARAM_APPLY_UAPSD;
 
 		/* TDLS peers cannot be added */
-		if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
+		if ((params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) ||
+		    info->attrs[NL80211_ATTR_PEER_AID])
 			return -EINVAL;
 		/* but don't bother the driver with it */
 		params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
@@ -4063,7 +4071,8 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 		if (params.sta_flags_mask & BIT(NL80211_STA_FLAG_ASSOCIATED))
 			return -EINVAL;
 		/* TDLS peers cannot be added */
-		if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
+		if ((params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) ||
+		    info->attrs[NL80211_ATTR_PEER_AID])
 			return -EINVAL;
 		break;
 	case NL80211_IFTYPE_STATION:
Signature · 4 lines
1.7.9.5

-- 
Jouni Malinen                                            PGP id EFC895FA
maintainer
#4 lore raw
Quoted 5 lines · Jouni Malinen

VHT uses peer AID in the PARTIAL_AID field in TDLS frames. The current design for TDLS is to first add a dummy STA entry before completing TDLS Setup and then update information on this STA entry based on what was received from the peer during the setup exchange.

Quoted 10 lines

In theory, this could use NL80211_ATTR_STA_AID to set the peer AID just like this is used in AP mode to set the AID of an association station. However, existing cfg80211 validation rules prevent this attribute from being used with set_station operation. To avoid interoperability issues between different kernel and user space version combinations, introduce a new nl80211 attribute for the purpose of setting TDLS peer AID. This attribute can be used in both the new_station and set_station operations. It is not supposed to be allowed to change the AID value during the lifetime of the STA entry, but that validation is left for drivers to do in the change_station callback.

Hmm. I guess I accidentally applied the first version, I've now applied the differences.

johannes