net, ipw2x00: remove redundant D0 power state set
Subsystems (3)
PATCH 3/7 net, ipw2x00: remove redundant D0 power state set
Pci_enable_device() will set device power state to D0, so it's no need to do it again in ipw2100_pci_init_one().
Signed-off-by Yijing Wang <[email protected]>
--- drivers/net/wireless/ipw2x00/ipw2100.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)
drivers/net/wireless/ipw2x00/ipw2100.c +0 -2
@@ -6242,8 +6242,6 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,if ((val &0x0000ff00 ) !=0 )pci_write_config_dword (pci_dev,0x40 , val &0xffff00ff ); -pci_set_power_state (pci_dev,PCI_D0 ); -if (!ipw2100_hw_is_adapter_in_system (dev)) { printk(KERN_WARNING DRV_NAME "Device not found via register read.\n");
Signature · 1 line
1.7.1