treewide: Fix typo in printk
Subsystems (11)
PATCH 1/1 treewide: Fix typo in printk
Correct spelling typo in printk within various part of drivers.
Signed-off-by Masanari Iida <[email protected]>
--- drivers/acpi/acpica/utobject.c | 2 +- drivers/cpufreq/s3c2416-cpufreq.c | 2 +- drivers/net/ethernet/mellanox/mlx4/main.c | 2 +- drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +- drivers/net/wireless/ath/ath9k/Kconfig | 2 +- drivers/scsi/libiscsi_tcp.c | 2 +- drivers/scsi/pmcraid.c | 2 +- lib/Kconfig.kgdb | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-)
drivers/acpi/acpica/utobject.c +1 -1
@@ -354,7 +354,7 @@ u8 acpi_ut_valid_internal_object(void *object)default :ACPI_DEBUG_PRINT ((ACPI_DB_EXEC , -"%p is not not an ACPI operand obj [%s]\n" , +"%p is not an ACPI operand obj [%s]\n" , object,acpi_ut_get_descriptor_name (object)));break ; }
drivers/cpufreq/s3c2416-cpufreq.c +1 -1
@@ -205,7 +205,7 @@ static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx) ret =s3c2416_cpufreq_set_armdiv (s3c_freq,clk_get_rate (s3c_freq->hclk) /1000 );if (ret <0 ) { -pr_err ("cpufreq: Failed to to set the armdiv to %lukHz: %d\n" , +pr_err ("cpufreq: Failed to set the armdiv to %lukHz: %d\n" ,clk_get_rate (s3c_freq->hclk) /1000 , ret);return ret; }
drivers/net/ethernet/mellanox/mlx4/main.c +1 -1
@@ -98,7 +98,7 @@ MODULE_PARM_DESC(log_num_mgm_entry_size, "log mgm size, that defines the num"static bool enable_64b_cqe_eqe;module_param (enable_64b_cqe_eqe, bool,0444 );MODULE_PARM_DESC (enable_64b_cqe_eqe, -"Enable 64 byte CQEs/EQEs when the the FW supports this" ); +"Enable 64 byte CQEs/EQEs when the FW supports this" );#define HCA_GLOBAL_CAP_MASK 0
drivers/net/ethernet/neterion/vxge/vxge-main.c +1 -1
@@ -3444,7 +3444,7 @@ static int vxge_device_register(struct __vxge_hw_device *hldev, }vxge_debug_init (vxge_hw_device_trace_level_get (hldev), -"%s : checksuming enabled" , __func__); +"%s : checksumming enabled" , __func__);if (high_dma) { ndev->features |=NETIF_F_HIGHDMA ;
drivers/net/wireless/ath/ath9k/Kconfig +1 -1
@@ -28,7 +28,7 @@ config ATH9K Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family of chipsets. For a specific list of supported external cards, laptops that already ship with these cards and - APs that come with these cards refer to to ath9k wiki + APs that come with these cards refer to ath9k wiki products page: http://wireless.kernel.org/en/users/Drivers/ath9k/products
drivers/scsi/libiscsi_tcp.c +1 -1
@@ -558,7 +558,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task)if (!rc) {iscsi_conn_printk (KERN_ERR , conn,"Could not allocate R2T. " "Target has sent more R2Ts than it " -"negotiated for or driver has has leaked.\n" ); +"negotiated for or driver has leaked.\n" );return ISCSI_ERR_PROTO ; }
drivers/scsi/pmcraid.c +1 -1
@@ -6092,7 +6092,7 @@ static int __init pmcraid_init(void)if (IS_ERR (pmcraid_class)) { error =PTR_ERR (pmcraid_class); -pmcraid_err ("failed to register with with sysfs, error = %x\n" , +pmcraid_err ("failed to register with sysfs, error = %x\n" , error); goto out_unreg_chrdev; }
lib/Kconfig.kgdb +1 -1
@@ -64,7 +64,7 @@ config KGDB_LOW_LEVEL_TRAP default n help This will add an extra call back to kgdb for the breakpoint - exception handler on which will will allow kgdb to step + exception handler on which will allow kgdb to step through a notify handler. config KGDB_KDB
Signature · 1 line
1.8.3
Quoted 19 lines · Masanari Iida
Correct spelling typo in printk within various part of drivers.
Signed-off-by Masanari Iida <[email protected]>--- drivers/acpi/acpica/utobject.c | 2 +- drivers/cpufreq/s3c2416-cpufreq.c | 2 +- drivers/net/ethernet/mellanox/mlx4/main.c | 2 +- drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +- drivers/net/wireless/ath/ath9k/Kconfig | 2 +- drivers/scsi/libiscsi_tcp.c | 2 +- drivers/scsi/pmcraid.c | 2 +- lib/Kconfig.kgdb | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-)lib/Kconfig.kgdb +0
-0
lib/Kconfig.kgdb config KGDB_LOW_LEVEL_TRAP · line 67
Quoted 5 lines
lib/Kconfig.kgdb +1
-1@@ -64,7 +64,7 @@ config KGDB_LOW_LEVEL_TRAP default n help This will add an extra call back to kgdb for the breakpoint - exception handler on which will will allow kgdb to step + exception handler on which will allow kgdb to step
exception handler which will allow kgdb to step
Quoted 4 lines
lib/Kconfig.kgdb +0
-0through a notify handler. config KGDB_KDB
Signature · 1 line
~Randy
Correct spelling typo in printk within various drivers.
Signed-off-by Masanari Iida <[email protected]>
--- drivers/acpi/acpica/utobject.c | 2 +- drivers/cpufreq/s3c2416-cpufreq.c | 2 +- drivers/net/ethernet/mellanox/mlx4/main.c | 2 +- drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +- drivers/net/wireless/ath/ath9k/Kconfig | 2 +- drivers/scsi/libiscsi_tcp.c | 2 +- drivers/scsi/pmcraid.c | 2 +- lib/Kconfig.kgdb | 4 ++-- 8 files changed, 9 insertions(+), 9 deletions(-)
drivers/acpi/acpica/utobject.c +1 -1
@@ -354,7 +354,7 @@ u8 acpi_ut_valid_internal_object(void *object)default :ACPI_DEBUG_PRINT ((ACPI_DB_EXEC , -"%p is not not an ACPI operand obj [%s]\n" , +"%p is not an ACPI operand obj [%s]\n" , object,acpi_ut_get_descriptor_name (object)));break ; }
drivers/cpufreq/s3c2416-cpufreq.c +1 -1
@@ -205,7 +205,7 @@ static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx) ret =s3c2416_cpufreq_set_armdiv (s3c_freq,clk_get_rate (s3c_freq->hclk) /1000 );if (ret <0 ) { -pr_err ("cpufreq: Failed to to set the armdiv to %lukHz: %d\n" , +pr_err ("cpufreq: Failed to set the armdiv to %lukHz: %d\n" ,clk_get_rate (s3c_freq->hclk) /1000 , ret);return ret; }
drivers/net/ethernet/mellanox/mlx4/main.c +1 -1
@@ -98,7 +98,7 @@ MODULE_PARM_DESC(log_num_mgm_entry_size, "log mgm size, that defines the num"static bool enable_64b_cqe_eqe;module_param (enable_64b_cqe_eqe, bool,0444 );MODULE_PARM_DESC (enable_64b_cqe_eqe, -"Enable 64 byte CQEs/EQEs when the the FW supports this" ); +"Enable 64 byte CQEs/EQEs when the FW supports this" );#define HCA_GLOBAL_CAP_MASK 0
drivers/net/ethernet/neterion/vxge/vxge-main.c +1 -1
@@ -3444,7 +3444,7 @@ static int vxge_device_register(struct __vxge_hw_device *hldev, }vxge_debug_init (vxge_hw_device_trace_level_get (hldev), -"%s : checksuming enabled" , __func__); +"%s : checksumming enabled" , __func__);if (high_dma) { ndev->features |=NETIF_F_HIGHDMA ;
drivers/net/wireless/ath/ath9k/Kconfig +1 -1
@@ -28,7 +28,7 @@ config ATH9K Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family of chipsets. For a specific list of supported external cards, laptops that already ship with these cards and - APs that come with these cards refer to to ath9k wiki + APs that come with these cards refer to ath9k wiki products page: http://wireless.kernel.org/en/users/Drivers/ath9k/products
drivers/scsi/libiscsi_tcp.c +1 -1
@@ -558,7 +558,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task)if (!rc) {iscsi_conn_printk (KERN_ERR , conn,"Could not allocate R2T. " "Target has sent more R2Ts than it " -"negotiated for or driver has has leaked.\n" ); +"negotiated for or driver has leaked.\n" );return ISCSI_ERR_PROTO ; }
drivers/scsi/pmcraid.c +1 -1
@@ -6092,7 +6092,7 @@ static int __init pmcraid_init(void)if (IS_ERR (pmcraid_class)) { error =PTR_ERR (pmcraid_class); -pmcraid_err ("failed to register with with sysfs, error = %x\n" , +pmcraid_err ("failed to register with sysfs, error = %x\n" , error); goto out_unreg_chrdev; }
lib/Kconfig.kgdb +2 -2
@@ -64,8 +64,8 @@ config KGDB_LOW_LEVEL_TRAP default n help This will add an extra call back to kgdb for the breakpoint - exception handler on which will will allow kgdb to step - through a notify handler. + exception handler which will allow kgdb to step through a + notify handler. config KGDB_KDB bool "KGDB_KDB: include kdb frontend for kgdb"
Signature · 1 line
1.8.3.101.g727a46b
Randy Dunlap
Acked-byQuoted 3 lines · Masanari Iida
Correct spelling typo in printk within various drivers.
Signed-off-by Masanari Iida <[email protected]>
Acked-by Randy Dunlap <[email protected]>
Thanks.
Quoted 119 lines
--- drivers/acpi/acpica/utobject.c | 2 +- drivers/cpufreq/s3c2416-cpufreq.c | 2 +- drivers/net/ethernet/mellanox/mlx4/main.c | 2 +- drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +- drivers/net/wireless/ath/ath9k/Kconfig | 2 +- drivers/scsi/libiscsi_tcp.c | 2 +- drivers/scsi/pmcraid.c | 2 +- lib/Kconfig.kgdb | 4 ++-- 8 files changed, 9 insertions(+), 9 deletions(-)drivers/acpi/acpica/utobject.c +1
-1@@ -354,7 +354,7 @@ u8 acpi_ut_valid_internal_object(void *object)default :ACPI_DEBUG_PRINT ((ACPI_DB_EXEC , -"%p is not not an ACPI operand obj [%s]\n" , +"%p is not an ACPI operand obj [%s]\n" , object,acpi_ut_get_descriptor_name (object)));break ; }drivers/cpufreq/s3c2416-cpufreq.c +1
-1@@ -205,7 +205,7 @@ static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx) ret =s3c2416_cpufreq_set_armdiv (s3c_freq,clk_get_rate (s3c_freq->hclk) /1000 );if (ret <0 ) { -pr_err ("cpufreq: Failed to to set the armdiv to %lukHz: %d\n" , +pr_err ("cpufreq: Failed to set the armdiv to %lukHz: %d\n" ,clk_get_rate (s3c_freq->hclk) /1000 , ret);return ret; }drivers/net/ethernet/mellanox/mlx4/main.c +1
-1@@ -98,7 +98,7 @@ MODULE_PARM_DESC(log_num_mgm_entry_size, "log mgm size, that defines the num"static bool enable_64b_cqe_eqe;module_param (enable_64b_cqe_eqe, bool,0444 );MODULE_PARM_DESC (enable_64b_cqe_eqe, -"Enable 64 byte CQEs/EQEs when the the FW supports this" ); +"Enable 64 byte CQEs/EQEs when the FW supports this" );#define HCA_GLOBAL_CAP_MASK 0drivers/net/ethernet/neterion/vxge/vxge-main.c +1
-1@@ -3444,7 +3444,7 @@ static int vxge_device_register(struct __vxge_hw_device *hldev, }vxge_debug_init (vxge_hw_device_trace_level_get (hldev), -"%s : checksuming enabled" , __func__); +"%s : checksumming enabled" , __func__);if (high_dma) { ndev->features |=NETIF_F_HIGHDMA ;drivers/net/wireless/ath/ath9k/Kconfig +1
-1@@ -28,7 +28,7 @@ config ATH9K Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family of chipsets. For a specific list of supported external cards, laptops that already ship with these cards and - APs that come with these cards refer to to ath9k wiki + APs that come with these cards refer to ath9k wiki products page: http://wireless.kernel.org/en/users/Drivers/ath9k/productsdrivers/scsi/libiscsi_tcp.c +1
-1@@ -558,7 +558,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task)if (!rc) {iscsi_conn_printk (KERN_ERR , conn,"Could not allocate R2T. " "Target has sent more R2Ts than it " -"negotiated for or driver has has leaked.\n" ); +"negotiated for or driver has leaked.\n" );return ISCSI_ERR_PROTO ; }drivers/scsi/pmcraid.c +1
-1@@ -6092,7 +6092,7 @@ static int __init pmcraid_init(void)if (IS_ERR (pmcraid_class)) { error =PTR_ERR (pmcraid_class); -pmcraid_err ("failed to register with with sysfs, error = %x\n" , +pmcraid_err ("failed to register with sysfs, error = %x\n" , error); goto out_unreg_chrdev; }lib/Kconfig.kgdb +2
-2@@ -64,8 +64,8 @@ config KGDB_LOW_LEVEL_TRAP default n help This will add an extra call back to kgdb for the breakpoint - exception handler on which will will allow kgdb to step - through a notify handler. + exception handler which will allow kgdb to step through a + notify handler. config KGDB_KDB bool "KGDB_KDB: include kdb frontend for kgdb"
Signature · 1 line
~Randy