Skip to contentSkip to conversation

x86/microcode/amd: early loading fixes

PATCH In review Jacob Shin 3 participants 9 messages Jun 8, 2013 – Jun 26, 2013 x86

lore
Share & tools
lore

Jacob Shin

author
#0 lore raw

v3 cover x86/microcode/amd: early loading fixes

This patchset addreses two problems with early loading on AMD.

First, feedback from Yinghai that find_ucode_in_initrd() should be marked __init:
https://lkml.org/lkml/2013/6/4/695

And second, feedback from Henrique that Intel early loading supports multiple microcode firmware concatenated together, whereas the current AMD implementation lacks this support:
https://lkml.org/lkml/2013/5/31/4

V3:
* style fix -- reduce multiple if statements into a single one

V2:
* test for !initrd_start before using it
* use __pa() instead of __pa_nodebug() on AP load
* fixed calculation of start offset and size of the microcode container file

Jacob Shin (2):
x86/microcode/amd: make find_ucode_in_initrd() __init x86/microcode/amd: allow multiple families' bin files appended
together

 arch/x86/kernel/microcode_amd_early.c |  170 ++++++++++++++++++++++++---------
 1 file changed, 125 insertions(+), 45 deletions(-)
Signature · 1 line
1.7.9.5
author
#1 lore raw

PATCH v3 1/2 x86/microcode/amd: make find_ucode_in_initrd() __init

Change find_ucode_in_initrd() to __init and only let BSP call it during cold boot. This is the right thing to do because only BSP will see initrd loaded by the boot loader. APs will offset into initrd_start to find the microcode patch binary.

---
 arch/x86/kernel/microcode_amd_early.c |  102 ++++++++++++++++++++++-----------
 1 file changed, 69 insertions(+), 33 deletions(-)
arch/x86/kernel/microcode_amd_early.c +69 -33
index 9618805..c783248 100644
@@ -9,6 +9,7 @@
  */
 
 #include <linux/earlycpio.h>
+#include <linux/initrd.h>
 
 #include <asm/cpu.h>
 #include <asm/setup.h>
@@ -16,40 +17,59 @@
 
 static bool ucode_loaded;
 static u32 ucode_new_rev;
+static unsigned long ucode_offset;
+static size_t ucode_size;
 
 /*
  * Microcode patch container file is prepended to the initrd in cpio format.
  * See Documentation/x86/early-microcode.txt
  */
-static __cpuinitdata char ucode_path[] = "kernel/x86/microcode/AuthenticAMD.bin";
+static __initdata char ucode_path[] = "kernel/x86/microcode/AuthenticAMD.bin";
 
-static struct cpio_data __cpuinit find_ucode_in_initrd(void)
+static struct cpio_data __init find_ucode_in_initrd(void)
 {
 	long offset = 0;
+	char *path;
+	void *start;
+	size_t size;
+	unsigned long *uoffset;
+	size_t *usize;
 	struct cpio_data cd;
 
 #ifdef CONFIG_X86_32
+	struct boot_params *p;
+
 	/*
 	 * On 32-bit, early load occurs before paging is turned on so we need
 	 * to use physical addresses.
 	 */
-	if (!(read_cr0() & X86_CR0_PG)) {
-		struct boot_params *p;
-		p  = (struct boot_params *)__pa_nodebug(&boot_params);
-		cd = find_cpio_data((char *)__pa_nodebug(ucode_path),
-			(void *)p->hdr.ramdisk_image, p->hdr.ramdisk_size,
-			&offset);
-	} else
+	p       = (struct boot_params *)__pa_nodebug(&boot_params);
+	path    = (char *)__pa_nodebug(ucode_path);
+	start   = (void *)p->hdr.ramdisk_image;
+	size    = p->hdr.ramdisk_size;
+	uoffset = (unsigned long *)__pa_nodebug(&ucode_offset);
+	usize   = (size_t *)__pa_nodebug(&ucode_size);
+#else
+	path    = ucode_path;
+	start   = (void *)(boot_params.hdr.ramdisk_image + PAGE_OFFSET);
+	size    = boot_params.hdr.ramdisk_size;
+	uoffset = &ucode_offset;
+	usize   = &ucode_size;
 #endif
-		cd = find_cpio_data(ucode_path,
-			(void *)(boot_params.hdr.ramdisk_image + PAGE_OFFSET),
-			boot_params.hdr.ramdisk_size, &offset);
+
+	cd = find_cpio_data(path, start, size, &offset);
+	if (!cd.data)
+		return cd;
 
 	if (*(u32 *)cd.data != UCODE_MAGIC) {
 		cd.data = NULL;
 		cd.size = 0;
+		return cd;
 	}
 
+	*uoffset = (u8 *)cd.data - (u8 *)start;
+	*usize   = cd.size;
+
 	return cd;
 }
 
@@ -62,9 +82,8 @@ static struct cpio_data __cpuinit find_ucode_in_initrd(void)
  * load_microcode_amd() to save equivalent cpu table and microcode patches in
  * kernel heap memory.
  */
-static void __cpuinit apply_ucode_in_initrd(void)
+static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 {
-	struct cpio_data cd;
 	struct equiv_cpu_entry *eq;
 	u32 *header;
 	u8  *data;
@@ -78,12 +97,9 @@ static void __cpuinit apply_ucode_in_initrd(void)
 #else
 	new_rev = &ucode_new_rev;
 #endif
-	cd = find_ucode_in_initrd();
-	if (!cd.data)
-		return;
 
-	data   = cd.data;
-	left   = cd.size;
+	data   = ucode;
+	left   = size;
 	header = (u32 *)data;
 
 	/* find equiv cpu table */
@@ -129,7 +145,11 @@ static void __cpuinit apply_ucode_in_initrd(void)
 
 void __init load_ucode_amd_bsp(void)
 {
-	apply_ucode_in_initrd();
+	struct cpio_data cd = find_ucode_in_initrd();
+	if (!cd.data)
+		return;
+
+	apply_ucode_in_initrd(cd.data, cd.size);
 }
 
 #ifdef CONFIG_X86_32
@@ -145,12 +165,26 @@ u8 amd_bsp_mpb[MPB_MAX_SIZE];
 void __cpuinit load_ucode_amd_ap(void)
 {
 	struct microcode_amd *mc;
+	unsigned long *initrd;
+	unsigned long *uoffset;
+	size_t *usize;
+	void *ucode;
 
-	mc = (struct microcode_amd *)__pa_nodebug(amd_bsp_mpb);
-	if (mc->hdr.patch_id && mc->hdr.processor_rev_id)
+	mc = (struct microcode_amd *)__pa(amd_bsp_mpb);
+	if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
 		__apply_microcode_amd(mc);
-	else
-		apply_ucode_in_initrd();
+		return;
+	}
+
+	initrd  = (unsigned long *)__pa(&initrd_start);
+	uoffset = (unsigned long *)__pa(&ucode_offset);
+	usize   = (size_t *)__pa(&ucode_size);
+
+	if (!*usize || !*initrd)
+		return;
+
+	ucode = (void *)((unsigned long)__pa(*initrd) + *uoffset);
+	apply_ucode_in_initrd(ucode, *usize);
 }
 
 static void __init collect_cpu_sig_on_bsp(void *arg)
@@ -181,8 +215,13 @@ void __cpuinit load_ucode_amd_ap(void)
 	collect_cpu_info_amd_early(&cpu_data(cpu), ucode_cpu_info + cpu);
 
 	if (cpu && !ucode_loaded) {
-		struct cpio_data cd = find_ucode_in_initrd();
-		if (load_microcode_amd(0, cd.data, cd.size) != UCODE_OK)
+		void *ucode;
+
+		if (!ucode_size || !initrd_start)
+			return;
+
+		ucode = (void *)(initrd_start + ucode_offset);
+		if (load_microcode_amd(0, ucode, ucode_size) != UCODE_OK)
 			return;
 		ucode_loaded = true;
 	}
@@ -194,7 +233,7 @@ void __cpuinit load_ucode_amd_ap(void)
 int __init save_microcode_in_initrd_amd(void)
 {
 	enum ucode_state ret;
-	struct cpio_data cd;
+	void *ucode;
 #ifdef CONFIG_X86_32
 	unsigned int bsp = boot_cpu_data.cpu_index;
 	struct ucode_cpu_info *uci = ucode_cpu_info + bsp;
@@ -206,14 +245,11 @@ int __init save_microcode_in_initrd_amd(void)
 		pr_info("microcode: updated early to new patch_level=0x%08x\n",
 			ucode_new_rev);
 
-	if (ucode_loaded)
+	if (ucode_loaded || !ucode_size || !initrd_start)
 		return 0;
 
-	cd = find_ucode_in_initrd();
-	if (!cd.data)
-		return -EINVAL;
-
-	ret = load_microcode_amd(0, cd.data, cd.size);
+	ucode = (void *)(initrd_start + ucode_offset);
+	ret = load_microcode_amd(0, ucode, ucode_size);
 	if (ret != UCODE_OK)
 		return -EINVAL;
 
Signature · 1 line
1.7.9.5
author
#2 lore raw

PATCH v3 2/2 x86/microcode/amd: allow multiple families' bin files appended together

In reply to Jacob Shin

Add support for parsing through multiple families' microcode patch container binary files appended together when early loading. This is already supported on Intel.

---
 arch/x86/kernel/microcode_amd_early.c |   68 +++++++++++++++++++++++++++------
 1 file changed, 56 insertions(+), 12 deletions(-)
arch/x86/kernel/microcode_amd_early.c +56 -12
index c783248..1ac6e9a 100644
@@ -87,15 +87,21 @@ static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 	struct equiv_cpu_entry *eq;
 	u32 *header;
 	u8  *data;
-	u16 eq_id;
+	u16 eq_id = 0;
 	int offset, left;
-	u32 rev, dummy;
+	u32 rev, eax;
 	u32 *new_rev;
+	unsigned long *uoffset;
+	size_t *usize;
 
 #ifdef CONFIG_X86_32
 	new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
+	uoffset = (unsigned long *)__pa_nodebug(&ucode_offset);
+	usize   = (size_t *)__pa_nodebug(&ucode_size);
 #else
 	new_rev = &ucode_new_rev;
+	uoffset = &ucode_offset;
+	usize   = &ucode_size;
 #endif
 
 	data   = ucode;
@@ -108,18 +114,50 @@ static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 	    header[2] == 0)                            /* size */
 		return;
 
-	eq     = (struct equiv_cpu_entry *)(data + CONTAINER_HDR_SZ);
-	offset = header[2] + CONTAINER_HDR_SZ;
-	data  += offset;
-	left  -= offset;
+	eax = cpuid_eax(0x00000001);
+
+	while (left > 0) {
+		eq = (struct equiv_cpu_entry *)(data + CONTAINER_HDR_SZ);
+
+		offset = header[2] + CONTAINER_HDR_SZ;
+		data  += offset;
+		left  -= offset;
 
-	eq_id  = find_equiv_id(eq, cpuid_eax(0x00000001));
-	if (!eq_id)
+		eq_id = find_equiv_id(eq, eax);
+		if (eq_id)
+			break;
+
+		/*
+		 * support multiple container files appended together. if this
+		 * one does not have a matching equivalent cpu entry, we fast
+		 * forward to the next container file.
+		 */
+		while (left > 0) {
+			header = (u32 *)data;
+			if (header[0] == UCODE_MAGIC &&
+			    header[1] == UCODE_EQUIV_CPU_TABLE_TYPE)
+				break;
+
+			offset = header[1] + SECTION_HDR_SIZE;
+			data  += offset;
+			left  -= offset;
+		}
+
+		/* mark where the next microcode container file starts */
+		offset    = data - (u8 *)ucode;
+		*uoffset += offset;
+		*usize   -= offset;
+		ucode     = data;
+	}
+
+	if (!eq_id) {
+		*usize = 0;
 		return;
+	}
 
 	/* find ucode and update if needed */
 
-	rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+	rdmsr(MSR_AMD64_PATCH_LEVEL, rev, eax);
 
 	while (left > 0) {
 		struct microcode_amd *mc;
@@ -132,15 +170,21 @@ static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 		mc = (struct microcode_amd *)(data + SECTION_HDR_SIZE);
 		if (eq_id == mc->hdr.processor_rev_id && rev < mc->hdr.patch_id)
 			if (__apply_microcode_amd(mc) == 0) {
-				if (!(*new_rev))
-					*new_rev = mc->hdr.patch_id;
-				break;
+				rev = mc->hdr.patch_id;
+				*new_rev = rev;
 			}
 
 		offset  = header[1] + SECTION_HDR_SIZE;
 		data   += offset;
 		left   -= offset;
 	}
+
+	/* mark where this microcode container file ends */
+	offset  = *usize - (data - (u8 *)ucode);
+	*usize -= offset;
+
+	if (!(*new_rev))
+		*usize = 0;
 }
 
 void __init load_ucode_amd_bsp(void)
Signature · 1 line
1.7.9.5
author
#3 lore raw
In reply to Jacob Shin
Quoted 6 lines · Jacob Shin

This patchset addreses two problems with early loading on AMD.

First, feedback from Yinghai that find_ucode_in_initrd() should be marked __init:
https://lkml.org/lkml/2013/6/4/695

Quoted 7 lines

And second, feedback from Henrique that Intel early loading supports multiple microcode firmware concatenated together, whereas the current AMD implementation lacks this support:
https://lkml.org/lkml/2013/5/31/4

V3:
* style fix -- reduce multiple if statements into a single one

Hi hpa or Yinghai, just wondering if you had the chance to look at this V3 yet.

Thank you,

#4 lore raw
Quoted 12 lines · Jacob Shin
Quoted 11 lines · Jacob Shin

This patchset addreses two problems with early loading on AMD.

First, feedback from Yinghai that find_ucode_in_initrd() should be marked __init:
https://lkml.org/lkml/2013/6/4/695

And second, feedback from Henrique that Intel early loading supports multiple microcode firmware concatenated together, whereas the current AMD implementation lacks this support:
https://lkml.org/lkml/2013/5/31/4

Quoted 5 lines
Quoted 2 lines

V3:
* style fix -- reduce multiple if statements into a single one

Hi hpa or Yinghai, just wondering if you had the chance to look at this V3 yet.

It appears Peter applied v2 to tip:x86/microcode two days before you sent v3 - please send any changes in v3 as delta patches.

Thanks,

Ingo

author
#5 lore raw
Quoted 15 lines · Ingo Molnar
Quoted 12 lines · Jacob Shin
Quoted 11 lines · Jacob Shin

This patchset addreses two problems with early loading on AMD.

First, feedback from Yinghai that find_ucode_in_initrd() should be marked __init:
https://lkml.org/lkml/2013/6/4/695

And second, feedback from Henrique that Intel early loading supports multiple microcode firmware concatenated together, whereas the current AMD implementation lacks this support:
https://lkml.org/lkml/2013/5/31/4

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

V3:
* style fix -- reduce multiple if statements into a single one

Hi hpa or Yinghai, just wondering if you had the chance to look at this V3 yet.

It appears Peter applied v2 to tip:x86/microcode two days before you sent v3 - please send any changes in v3 as delta patches.

I actually recieved the tip-bot email <https://lkml.org/lkml/2013/6/12/468>
couple of days after sending out the above message, so I assumed that V3 was committed in.

I should have read the tip-bot message thoroughly and noticed it. Sorry about that. Here is the delta patch:

---8<---

Quoted 1 line

From 1445587da716b306f39feef46fb7150f292060c7 Mon Sep 17 00:00:00 2001

From: Jacob Shin <[email protected]>
Date: Thu, 20 Jun 2013 09:52:50 -0500
Subject: [PATCH] x86, microcode, amd: another early loading fixup

commit cd1c32ca969ebfd65e61312c988223bb14f09c2e is an early premature rendition of the patch. Augment it with this delta patch to:
* correctly mark offset and size of the matching bin file
* use __pa instead of __pa_nodebug during AP load
* check for !initrd_start before using it

---
 arch/x86/kernel/microcode_amd_early.c |   40 ++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 16 deletions(-)
arch/x86/kernel/microcode_amd_early.c +24 -16
index 4c593c2..1ac6e9a 100644
@@ -143,13 +143,17 @@ static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 			left  -= offset;
 		}
 
-		offset = data - (u8 *)ucode;
+		/* mark where the next microcode container file starts */
+		offset    = data - (u8 *)ucode;
 		*uoffset += offset;
 		*usize   -= offset;
+		ucode     = data;
 	}
 
-	if (!eq_id)
+	if (!eq_id) {
+		*usize = 0;
 		return;
+	}
 
 	/* find ucode and update if needed */
 
@@ -166,15 +170,21 @@ static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 		mc = (struct microcode_amd *)(data + SECTION_HDR_SIZE);
 		if (eq_id == mc->hdr.processor_rev_id && rev < mc->hdr.patch_id)
 			if (__apply_microcode_amd(mc) == 0) {
-				if (!(*new_rev))
-					*new_rev = mc->hdr.patch_id;
-				break;
+				rev = mc->hdr.patch_id;
+				*new_rev = rev;
 			}
 
 		offset  = header[1] + SECTION_HDR_SIZE;
 		data   += offset;
 		left   -= offset;
 	}
+
+	/* mark where this microcode container file ends */
+	offset  = *usize - (data - (u8 *)ucode);
+	*usize -= offset;
+
+	if (!(*new_rev))
+		*usize = 0;
 }
 
 void __init load_ucode_amd_bsp(void)
@@ -204,19 +214,20 @@ void __cpuinit load_ucode_amd_ap(void)
 	size_t *usize;
 	void *ucode;
 
-	mc = (struct microcode_amd *)__pa_nodebug(amd_bsp_mpb);
+	mc = (struct microcode_amd *)__pa(amd_bsp_mpb);
 	if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
 		__apply_microcode_amd(mc);
 		return;
 	}
 
-	initrd  = (unsigned long *)__pa_nodebug(&initrd_start);
-	uoffset = (unsigned long *)__pa_nodebug(&ucode_offset);
-	usize   = (size_t *)__pa_nodebug(&ucode_size);
-	if (!*usize)
+	initrd  = (unsigned long *)__pa(&initrd_start);
+	uoffset = (unsigned long *)__pa(&ucode_offset);
+	usize   = (size_t *)__pa(&ucode_size);
+
+	if (!*usize || !*initrd)
 		return;
 
-	ucode = (void *)((unsigned long)__pa_nodebug(*initrd) + *uoffset);
+	ucode = (void *)((unsigned long)__pa(*initrd) + *uoffset);
 	apply_ucode_in_initrd(ucode, *usize);
 }
 
@@ -250,7 +261,7 @@ void __cpuinit load_ucode_amd_ap(void)
 	if (cpu && !ucode_loaded) {
 		void *ucode;
 
-		if (!ucode_size)
+		if (!ucode_size || !initrd_start)
 			return;
 
 		ucode = (void *)(initrd_start + ucode_offset);
@@ -278,10 +289,7 @@ int __init save_microcode_in_initrd_amd(void)
 		pr_info("microcode: updated early to new patch_level=0x%08x\n",
 			ucode_new_rev);
 
-	if (ucode_loaded)
-		return 0;
-
-	if (!ucode_size)
+	if (ucode_loaded || !ucode_size || !initrd_start)
 		return 0;
 
 	ucode = (void *)(initrd_start + ucode_offset);
Signature · 1 line
1.7.9.5
author
#6 lore raw
Quoted 25 lines · Jacob Shin
Quoted 15 lines · Ingo Molnar
Quoted 12 lines · Jacob Shin
Quoted 11 lines · Jacob Shin

This patchset addreses two problems with early loading on AMD.

First, feedback from Yinghai that find_ucode_in_initrd() should be marked __init:
https://lkml.org/lkml/2013/6/4/695

And second, feedback from Henrique that Intel early loading supports multiple microcode firmware concatenated together, whereas the current AMD implementation lacks this support:
https://lkml.org/lkml/2013/5/31/4

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

V3:
* style fix -- reduce multiple if statements into a single one

Hi hpa or Yinghai, just wondering if you had the chance to look at this V3 yet.

It appears Peter applied v2 to tip:x86/microcode two days before you sent v3 - please send any changes in v3 as delta patches.

Quoted 6 lines

I actually recieved the tip-bot email <https://lkml.org/lkml/2013/6/12/468>
couple of days after sending out the above message, so I assumed that V3 was committed in.

I should have read the tip-bot message thoroughly and noticed it. Sorry about that. Here is the delta patch:

Sigh :-( .. sorry, forgot to sign off. Here it is again:

---8<---

Quoted 1 line

From 1445587da716b306f39feef46fb7150f292060c7 Mon Sep 17 00:00:00 2001

From: Jacob Shin <[email protected]>
Date: Thu, 20 Jun 2013 09:52:50 -0500
Subject: [PATCH] x86, microcode, amd: another early loading fixup

commit cd1c32ca969ebfd65e61312c988223bb14f09c2e is an early premature rendition of the patch. Augment it with this delta patch to:
* correctly mark offset and size of the matching bin file
* use __pa instead of __pa_nodebug during AP load
* check for !initrd_start before using it

---
 arch/x86/kernel/microcode_amd_early.c |   40 ++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 16 deletions(-)
arch/x86/kernel/microcode_amd_early.c +24 -16
index 4c593c2..1ac6e9a 100644
@@ -143,13 +143,17 @@ static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 			left  -= offset;
 		}
 
-		offset = data - (u8 *)ucode;
+		/* mark where the next microcode container file starts */
+		offset    = data - (u8 *)ucode;
 		*uoffset += offset;
 		*usize   -= offset;
+		ucode     = data;
 	}
 
-	if (!eq_id)
+	if (!eq_id) {
+		*usize = 0;
 		return;
+	}
 
 	/* find ucode and update if needed */
 
@@ -166,15 +170,21 @@ static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 		mc = (struct microcode_amd *)(data + SECTION_HDR_SIZE);
 		if (eq_id == mc->hdr.processor_rev_id && rev < mc->hdr.patch_id)
 			if (__apply_microcode_amd(mc) == 0) {
-				if (!(*new_rev))
-					*new_rev = mc->hdr.patch_id;
-				break;
+				rev = mc->hdr.patch_id;
+				*new_rev = rev;
 			}
 
 		offset  = header[1] + SECTION_HDR_SIZE;
 		data   += offset;
 		left   -= offset;
 	}
+
+	/* mark where this microcode container file ends */
+	offset  = *usize - (data - (u8 *)ucode);
+	*usize -= offset;
+
+	if (!(*new_rev))
+		*usize = 0;
 }
 
 void __init load_ucode_amd_bsp(void)
@@ -204,19 +214,20 @@ void __cpuinit load_ucode_amd_ap(void)
 	size_t *usize;
 	void *ucode;
 
-	mc = (struct microcode_amd *)__pa_nodebug(amd_bsp_mpb);
+	mc = (struct microcode_amd *)__pa(amd_bsp_mpb);
 	if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
 		__apply_microcode_amd(mc);
 		return;
 	}
 
-	initrd  = (unsigned long *)__pa_nodebug(&initrd_start);
-	uoffset = (unsigned long *)__pa_nodebug(&ucode_offset);
-	usize   = (size_t *)__pa_nodebug(&ucode_size);
-	if (!*usize)
+	initrd  = (unsigned long *)__pa(&initrd_start);
+	uoffset = (unsigned long *)__pa(&ucode_offset);
+	usize   = (size_t *)__pa(&ucode_size);
+
+	if (!*usize || !*initrd)
 		return;
 
-	ucode = (void *)((unsigned long)__pa_nodebug(*initrd) + *uoffset);
+	ucode = (void *)((unsigned long)__pa(*initrd) + *uoffset);
 	apply_ucode_in_initrd(ucode, *usize);
 }
 
@@ -250,7 +261,7 @@ void __cpuinit load_ucode_amd_ap(void)
 	if (cpu && !ucode_loaded) {
 		void *ucode;
 
-		if (!ucode_size)
+		if (!ucode_size || !initrd_start)
 			return;
 
 		ucode = (void *)(initrd_start + ucode_offset);
@@ -278,10 +289,7 @@ int __init save_microcode_in_initrd_amd(void)
 		pr_info("microcode: updated early to new patch_level=0x%08x\n",
 			ucode_new_rev);
 
-	if (ucode_loaded)
-		return 0;
-
-	if (!ucode_size)
+	if (ucode_loaded || !ucode_size || !initrd_start)
 		return 0;
 
 	ucode = (void *)(initrd_start + ucode_offset);
Signature · 1 line
1.7.9.5
author
#7 lore raw
Quoted 42 lines · Jacob Shin
Quoted 25 lines · Jacob Shin
Quoted 15 lines · Ingo Molnar
Quoted 12 lines · Jacob Shin
Quoted 11 lines · Jacob Shin

This patchset addreses two problems with early loading on AMD.

First, feedback from Yinghai that find_ucode_in_initrd() should be marked __init:
https://lkml.org/lkml/2013/6/4/695

And second, feedback from Henrique that Intel early loading supports multiple microcode firmware concatenated together, whereas the current AMD implementation lacks this support:
https://lkml.org/lkml/2013/5/31/4

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

V3:
* style fix -- reduce multiple if statements into a single one

Hi hpa or Yinghai, just wondering if you had the chance to look at this V3 yet.

It appears Peter applied v2 to tip:x86/microcode two days before you sent v3 - please send any changes in v3 as delta patches.

Quoted 6 lines

I actually recieved the tip-bot email <https://lkml.org/lkml/2013/6/12/468>
couple of days after sending out the above message, so I assumed that V3 was committed in.

I should have read the tip-bot message thoroughly and noticed it. Sorry about that. Here is the delta patch:

Sigh :-( .. sorry, forgot to sign off. Here it is again:

---8<---

From 1445587da716b306f39feef46fb7150f292060c7 Mon Sep 17 00:00:00 2001
From: Jacob Shin <[email protected]>
Date: Thu, 20 Jun 2013 09:52:50 -0500
Subject: [PATCH] x86, microcode, amd: another early loading fixup

Quoted 7 lines

commit cd1c32ca969ebfd65e61312c988223bb14f09c2e is an early premature rendition of the patch. Augment it with this delta patch to:
* correctly mark offset and size of the matching bin file
* use __pa instead of __pa_nodebug during AP load
* check for !initrd_start before using it

Hi hpa, checking back to see if you had the chance to look at this delta patch. It is needed to properly support concatenated microcode binaries on AMD early load. (Intel already supports this).

Thank you,

#8 lore raw

[tip:x86/microcode] x86, microcode, amd: Another early loading fixup

In reply to Jacob Shin
x86, microcode, amd: Another early loading fixup
Commit-ID:  9608d33b8210c993af4430d661a6474946480c9b
Gitweb:     http://git.kernel.org/tip/9608d33b8210c993af4430d661a6474946480c9b
Author:     Jacob Shin <[email protected]>
AuthorDate: Thu, 20 Jun 2013 09:52:50 -0500
Committer:  H. Peter Anvin <[email protected]>
CommitDate: Wed, 26 Jun 2013 14:55:37 -0700

x86, microcode, amd: Another early loading fixup

commit cd1c32ca969ebfd65e61312c988223bb14f09c2e is an early premature rendition of the patch. Augment it with this delta patch to:
* correctly mark offset and size of the matching bin file
* use __pa instead of __pa_nodebug during AP load
* check for !initrd_start before using it

---
 arch/x86/kernel/microcode_amd_early.c | 40 +++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 16 deletions(-)
arch/x86/kernel/microcode_amd_early.c +24 -16
index 4c593c2..1ac6e9a 100644
@@ -143,13 +143,17 @@ static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 			left  -= offset;
 		}
 
-		offset = data - (u8 *)ucode;
+		/* mark where the next microcode container file starts */
+		offset    = data - (u8 *)ucode;
 		*uoffset += offset;
 		*usize   -= offset;
+		ucode     = data;
 	}
 
-	if (!eq_id)
+	if (!eq_id) {
+		*usize = 0;
 		return;
+	}
 
 	/* find ucode and update if needed */
 
@@ -166,15 +170,21 @@ static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
 		mc = (struct microcode_amd *)(data + SECTION_HDR_SIZE);
 		if (eq_id == mc->hdr.processor_rev_id && rev < mc->hdr.patch_id)
 			if (__apply_microcode_amd(mc) == 0) {
-				if (!(*new_rev))
-					*new_rev = mc->hdr.patch_id;
-				break;
+				rev = mc->hdr.patch_id;
+				*new_rev = rev;
 			}
 
 		offset  = header[1] + SECTION_HDR_SIZE;
 		data   += offset;
 		left   -= offset;
 	}
+
+	/* mark where this microcode container file ends */
+	offset  = *usize - (data - (u8 *)ucode);
+	*usize -= offset;
+
+	if (!(*new_rev))
+		*usize = 0;
 }
 
 void __init load_ucode_amd_bsp(void)
@@ -204,19 +214,20 @@ void __cpuinit load_ucode_amd_ap(void)
 	size_t *usize;
 	void *ucode;
 
-	mc = (struct microcode_amd *)__pa_nodebug(amd_bsp_mpb);
+	mc = (struct microcode_amd *)__pa(amd_bsp_mpb);
 	if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
 		__apply_microcode_amd(mc);
 		return;
 	}
 
-	initrd  = (unsigned long *)__pa_nodebug(&initrd_start);
-	uoffset = (unsigned long *)__pa_nodebug(&ucode_offset);
-	usize   = (size_t *)__pa_nodebug(&ucode_size);
-	if (!*usize)
+	initrd  = (unsigned long *)__pa(&initrd_start);
+	uoffset = (unsigned long *)__pa(&ucode_offset);
+	usize   = (size_t *)__pa(&ucode_size);
+
+	if (!*usize || !*initrd)
 		return;
 
-	ucode = (void *)((unsigned long)__pa_nodebug(*initrd) + *uoffset);
+	ucode = (void *)((unsigned long)__pa(*initrd) + *uoffset);
 	apply_ucode_in_initrd(ucode, *usize);
 }
 
@@ -250,7 +261,7 @@ void __cpuinit load_ucode_amd_ap(void)
 	if (cpu && !ucode_loaded) {
 		void *ucode;
 
-		if (!ucode_size)
+		if (!ucode_size || !initrd_start)
 			return;
 
 		ucode = (void *)(initrd_start + ucode_offset);
@@ -278,10 +289,7 @@ int __init save_microcode_in_initrd_amd(void)
 		pr_info("microcode: updated early to new patch_level=0x%08x\n",
 			ucode_new_rev);
 
-	if (ucode_loaded)
-		return 0;
-
-	if (!ucode_size)
+	if (ucode_loaded || !ucode_size || !initrd_start)
 		return 0;
 
 	ucode = (void *)(initrd_start + ucode_offset);