powerpc/85xx: Add P1023RDB board support
PATCH v3 1/1 powerpc/85xx: Add P1023RDB board support
P1023RDB Specification:
-----------------------
Memory subsystem:
512MB DDR3 (Fixed DDR on board)
64MB NOR flash
128MB NAND flash
Ethernet:
eTSEC1: Connected to Atheros AR8035 GETH PHY
eTSEC2: Connected to Atheros AR8035 GETH PHY
PCIe:
Three mini-PCIe slots
USB: Two USB2.0 Type A ports
I2C:
AT24C08 8K Board EEPROM (8 bit address)
--- arch/powerpc/cpu/mpc85xx/Makefile | 1 + board/freescale/p1023rdb/Makefile | 33 +++ board/freescale/p1023rdb/ddr.c | 105 +++++++++ board/freescale/p1023rdb/law.c | 34 +++ board/freescale/p1023rdb/p1023rdb.c | 161 ++++++++++++++ board/freescale/p1023rdb/tlb.c | 115 ++++++++++ boards.cfg | 1 + include/configs/P1023RDB.h | 401 +++++++++++++++++++++++++++++++++++ 8 files changed, 851 insertions(+), 0 deletions(-) create mode 100644 board/freescale/p1023rdb/Makefile create mode 100644 board/freescale/p1023rdb/ddr.c create mode 100644 board/freescale/p1023rdb/law.c create mode 100644 board/freescale/p1023rdb/p1023rdb.c create mode 100644 board/freescale/p1023rdb/tlb.c create mode 100644 include/configs/P1023RDB.h
arch/powerpc/cpu/mpc85xx/Makefile +1 -0
@@ -73,6 +73,7 @@ COBJS-$(CONFIG_P1014) += ddr-gen3.o COBJS-$(CONFIG_P1020) += ddr-gen3.o COBJS-$(CONFIG_P1021) += ddr-gen3.o COBJS-$(CONFIG_P1022) += ddr-gen3.o +COBJS-$(CONFIG_P1023) += ddr-gen3.o COBJS-$(CONFIG_P1024) += ddr-gen3.o COBJS-$(CONFIG_P1025) += ddr-gen3.o COBJS-$(CONFIG_P2010) += ddr-gen3.o
board/freescale/p1023rdb/Makefile new file +33 -0
@@ -0,0 +1,33 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
board/freescale/p1023rdb/ddr.c new file +105 -0
105 lines not on this page · raw message
board/freescale/p1023rdb/law.c new file +34 -0
@@ -0,0 +1,34 @@ +/* +* Copyright 2013 Freescale Semiconductor, Inc. +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { +SET_LAW (CONFIG_SYS_NAND_BASE_PHYS ,LAW_SIZE_1M ,LAW_TRGT_IF_LBC ), +SET_LAW (CONFIG_SYS_QMAN_MEM_PHYS ,LAW_SIZE_4M , +LAW_TRGT_IF_DPAA_SWP_SRAM ), +SET_LAW (CONFIG_SYS_FLASH_BASE_PHYS ,LAW_SIZE_256M ,LAW_TRGT_IF_LBC ), +}; + +int num_law_entries =ARRAY_SIZE (law_table);
board/freescale/p1023rdb/p1023rdb.c new file +161 -0
161 lines not on this page · raw message
board/freescale/p1023rdb/tlb.c new file +115 -0
115 lines not on this page · raw message
boards.cfg +1 -0
@@ -829,6 +829,7 @@ P1022DS_36BIT_SPIFLASH powerpc mpc85xx p1022ds freesca P1022DS_SDCARD powerpc mpc85xx p1022ds freescale - P1022DS:SDCARD P1022DS_36BIT_SDCARD powerpc mpc85xx p1022ds freescale - P1022DS:36BIT,SDCARD P1022DS_36BIT powerpc mpc85xx p1022ds freescale - P1022DS:36BIT +P1023RDB powerpc mpc85xx p1023rdb freescale - P1023RDB P1023RDS powerpc mpc85xx p1023rds freescale - P1023RDS P1023RDS_NAND powerpc mpc85xx p1023rds freescale - P1023RDS:NAND P1024RDB powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1024RDB
include/configs/P1023RDB.h new file +401 -0
401 lines not on this page · raw message
Signature · 1 line
1.7.6.5
PATCH v3 1/1 powerpc/85xx: Add P1023RDB board support
Quoted 16 lines · Chunhe Lan
+/*
+ * Memory map
+ *
+ * 0x0000_0000 0x1fff_ffff DDR 500M
Cacheable
+ * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G
non-cacheable
+ * 0xc000_0000 0xdfff_ffff PCI 512M
non-cacheable
+ * 0xe100_0000 0xe3ff_ffff PCI IO range 4M
non-cacheable
+ * 0xff00_0000 0xff3f_ffffDPAA_QBMAN4M
+ *
+ * Localbus non-cacheable
+ *
+ * 0xec00_0000 0xefff_ffff NOR flash 64M NOR
Quoted 8 lines
flash
+ * 0xff60_0000 0xff7f_ffff CCSR 2M
non-cacheable
+ * 0xffa0_0000 0xffaf_ffff NAND 1M
non-cacheable
+ * 0xffd0_0000 0xffd0_3fff L1 for stack 16K
Cacheable TLB0
+ */
Same comments as before -- only two of those last four are under the localbus, and only three are non-cacheable.
Also, DPAA_QBMAN should say "4M cacheable" rather than "4M" for consistency. Also, please capitalize consistently ("non-cacheable" and "Cacheable"). :-)
-Scott