mx53: fix ssi3 addresses
Subsystems (3)
PATCH 1/2 mx53: fix ssi3 addresses
else its mapped at the i.MX51's address so the peripheral doesn't works.
Signed-off-by Eric Bénard <[email protected]>
--- arch/arm/mach-mx5/devices.c | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/mach-mx5/devices.c +2 -0
@@ -1850,6 +1850,8 @@ int __init mxc_init_devices(void) ssi1_resources[0 ].end -=MX53_OFFSET ; ssi2_resources[0 ].start -=MX53_OFFSET ; ssi2_resources[0 ].end -=MX53_OFFSET ; + ssi3_resources[0 ].start -=MX53_OFFSET ; + ssi3_resources[0 ].end -=MX53_OFFSET ; esai_resources[0 ].start -=MX53_OFFSET ; esai_resources[0 ].end -=MX53_OFFSET ; tve_resources[0 ].start -=MX53_OFFSET ;
Signature · 1 line
1.8.1.4
PATCH 2/2 SD2_DATA1__AUDMUX_AUD4_TXFS: fix pin defintion
else the wrong input is selected for the AUDMUX4_TXFS
Signed-off-by Eric Bénard <[email protected]>
--- arch/arm/plat-mxc/include/mach/iomux-mx53.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/plat-mxc/include/mach/iomux-mx53.h +1 -1
@@ -1122,7 +1122,7 @@#define _MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, 0x0, 0, 0)#define _MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, 0x0, 0, 0)#define _MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, 0) -#define _MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, 0) +#define _MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 1, 0)#define _MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, 0)#define _MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, 0x0, 0, 0)#define _MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, 0x0, 0, 0)
Signature · 1 line
1.8.1.4