Skip to contentSkip to conversation

ath9k: Fix ANI for AP mode

PATCH New Sujith Manoharan 1 participant 1 message Jun 17, 2013 Qualcomm Atheros ATH9K wireless driver

lore
Share & tools
lore

Sujith Manoharan

author
#0 lore raw

PATCH v2 1/1 ath9k: Fix ANI for AP mode

From: Sujith Manoharan <[email protected]>

The commit "ath9k: Fix ANI monitoring" reverted an earlier commit that adjusted ANI to improve performance. But, this causes adverse effects in AP mode (as reported by Felix based on an OpenWrt report). Use the older INI/period configuration for now until more testing is done.

Cc Felix Fietkau <[email protected]>
Cc Rajkumar Manoharan <[email protected]>
Signed-off-by Sujith Manoharan <[email protected]>

---
v2 - Earlier patch added a macro twice.

 drivers/net/wireless/ath/ath9k/ani.c | 29 ++++++++++++-----------------
 drivers/net/wireless/ath/ath9k/ani.h |  6 +++++-
 2 files changed, 17 insertions(+), 18 deletions(-)
drivers/net/wireless/ath/ath9k/ani.c +12 -17
index a68beb1..4994bea 100644
@@ -186,6 +186,14 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
 				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				     entry_ofdm->ofdm_weak_signal_on);
 	}
+
+	if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI;
+	} else {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
+	}
 }
 
 static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)

@@ -420,25 +428,12 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
 		ofdmPhyErrRate, aniState->cckNoiseImmunityLevel,
 		cckPhyErrRate, aniState->ofdmsTurn);
 
-	if (aniState->listenTime > 5 * ah->aniperiod) {
-		/*
-		 * Check if we need to lower immunity if
-		 * 5 ani_periods have passed.
-		 */
-		if (ofdmPhyErrRate <= ah->config.ofdm_trig_low &&
-		    cckPhyErrRate <= ah->config.cck_trig_low) {
+	if (aniState->listenTime > ah->aniperiod) {
+		if (cckPhyErrRate < ah->config.cck_trig_low &&
+		    ofdmPhyErrRate < ah->config.ofdm_trig_low) {
 			ath9k_hw_ani_lower_immunity(ah);
 			aniState->ofdmsTurn = !aniState->ofdmsTurn;
-		}
-		ath9k_ani_restart(ah);
-	} else if (aniState->listenTime > ah->aniperiod) {
-		/*
-		 * Check if immunity has to be raised,
-		 * (either OFDM or CCK).
-		 */
-		if (ofdmPhyErrRate > ah->config.ofdm_trig_high &&
-		    (cckPhyErrRate <= ah->config.cck_trig_high ||
-		     aniState->ofdmsTurn)) {
+		} else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) {
 			ath9k_hw_ani_ofdm_err_trigger(ah);
 			aniState->ofdmsTurn = false;
 		} else if (cckPhyErrRate > ah->config.cck_trig_high) {
drivers/net/wireless/ath/ath9k/ani.h +5 -1
index 77a06fd..b54a3fb 100644
@@ -20,8 +20,12 @@
 #define BEACON_RSSI(ahp) (ahp->stats.avgbrssi)
 
 /* units are errors per second */
-#define ATH9K_ANI_OFDM_TRIG_HIGH          1000
+#define ATH9K_ANI_OFDM_TRIG_HIGH           3500
+#define ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI 1000
+
 #define ATH9K_ANI_OFDM_TRIG_LOW           400
+#define ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI 900
+
 #define ATH9K_ANI_CCK_TRIG_HIGH           600
 #define ATH9K_ANI_CCK_TRIG_LOW            300
Signature · 1 line
1.8.3.1