Skip to contentSkip to conversation

nfs: teach NFSv3 mount code to try each authflavor in turn

PATCH Superseded Jeff Layton 2 participants 5 messages Jun 27, 2013

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover nfs: teach NFSv3 mount code to try each authflavor in turn

Changes since v2 set:
- fix some signed vs. unsigned type comparisons
- change how an empty server_authlist is handled. Instead of picking an authflavor to try at that point, just munge the list to contain only RPC_AUTH_NULL. The rest of the logic can take over at that point.

I got a report of a regression in recent kernels. Windows 2012 servers support v3 and v4.1. They also return a list of authflavors that starts with AUTH_GSS flavors and ends with AUTH_SYS.

Since commit 4580a92 (NFS: Use server-recommended security flavor by default (NFSv3)) mounting this server with nfsv3 fails unless you specify sec=sys. I can replicate the problem with a Linux NFS server by exporing a filesystem with "sec=krb5:sys".

This patchset overhauls the NFSv3 auth code to try each authflavor in the list provided by the server in the order that it specified them. With this, I'm again able to mount the server without needing any special mount options.

Thanks to Chuck Lever for suggestions thus far...

Jeff Layton (3):
nfs: refactor "need_mount" code out of nfs_try_mount
nfs: move server_authlist into nfs_try_mount_request
nfs: have NFSv3 try server-specified auth flavors in turn

 fs/nfs/super.c | 186 ++++++++++++++++++++++++++++++++-------------------------
 1 file changed, 104 insertions(+), 82 deletions(-)
Signature · 1 line
1.8.1.4
#1 lore raw

PATCH v3 1/3 nfs: refactor "need_mount" code out of nfs_try_mount

This looks like pointless refactoring for now, but we'll flesh out the need_mount case a little more in a later patch.

---
 fs/nfs/super.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)
fs/nfs/super.c +16 -8
index 2d7525f..afeee81 100644
@@ -1759,21 +1759,29 @@ static int nfs_request_mount(struct nfs_parsed_mount_data *args,
 	return nfs_select_flavor(args, &request);
 }
 
+static struct nfs_server *nfs_try_mount_request(struct nfs_mount_info *mount_info,
+					struct nfs_subversion *nfs_mod)
+{
+	int status;
+
+	status = nfs_request_mount(mount_info->parsed, mount_info->mntfh);
+	if (status)
+		return ERR_PTR(status);
+
+	return nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
+}
+
 struct dentry *nfs_try_mount(int flags, const char *dev_name,
 			     struct nfs_mount_info *mount_info,
 			     struct nfs_subversion *nfs_mod)
 {
-	int status;
 	struct nfs_server *server;
 
-	if (mount_info->parsed->need_mount) {
-		status = nfs_request_mount(mount_info->parsed, mount_info->mntfh);
-		if (status)
-			return ERR_PTR(status);
-	}
+	if (mount_info->parsed->need_mount)
+		server = nfs_try_mount_request(mount_info, nfs_mod);
+	else
+		server = nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
 
-	/* Get a volume representation */
-	server = nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
 	if (IS_ERR(server))
 		return ERR_CAST(server);
 
Signature · 1 line
1.8.1.4
#2 lore raw

PATCH v3 2/3 nfs: move server_authlist into nfs_try_mount_request

In reply to Jeff Layton

In a later patch we're going to want to cycle over this list and attempt to call ->create_server for each different flavor until one succeeds. Move the list allocation to the stack of nfs_try_mount_request() and pass a pointer to it and its length to nfs_request_mount().

---
 fs/nfs/super.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
fs/nfs/super.c +9 -5
index afeee81..a0949f5 100644
@@ -1701,10 +1701,10 @@ out_err:
  * corresponding to the provided path.
  */
 static int nfs_request_mount(struct nfs_parsed_mount_data *args,
-			     struct nfs_fh *root_fh)
+			     struct nfs_fh *root_fh,
+			     rpc_authflavor_t *server_authlist,
+			     unsigned int *server_authlist_len)
 {
-	rpc_authflavor_t server_authlist[NFS_MAX_SECFLAVORS];
-	unsigned int server_authlist_len = ARRAY_SIZE(server_authlist);
 	struct nfs_mount_request request = {
 		.sap		= (struct sockaddr *)
 						&args->mount_server.address,
@@ -1712,7 +1712,7 @@ static int nfs_request_mount(struct nfs_parsed_mount_data *args,
 		.protocol	= args->mount_server.protocol,
 		.fh		= root_fh,
 		.noresvport	= args->flags & NFS_MOUNT_NORESVPORT,
-		.auth_flav_len	= &server_authlist_len,
+		.auth_flav_len	= server_authlist_len,
 		.auth_flavs	= server_authlist,
 		.net		= args->net,
 	};
@@ -1763,8 +1763,12 @@ static struct nfs_server *nfs_try_mount_request(struct nfs_mount_info *mount_inf
 					struct nfs_subversion *nfs_mod)
 {
 	int status;
+	struct nfs_parsed_mount_data *args = mount_info->parsed;
+	rpc_authflavor_t authlist[NFS_MAX_SECFLAVORS];
+	unsigned int authlist_len = ARRAY_SIZE(authlist);
 
-	status = nfs_request_mount(mount_info->parsed, mount_info->mntfh);
+	status = nfs_request_mount(args, mount_info->mntfh, authlist,
+					&authlist_len);
 	if (status)
 		return ERR_PTR(status);
 
Signature · 1 line
1.8.1.4
#3 lore raw

PATCH v3 3/3 nfs: have NFSv3 try server-specified auth flavors in turn

In reply to Jeff Layton

The current scheme is to try and pick the auth flavor that the server prefers. In some cases though, we may find that we're not actually able to use that auth flavor later. For instance, the server may prefer an AUTH_GSS flavor, but we may not be able to get GSSAPI creds.

The current code just gives up at that point. Change it instead to try the ->create_server call using each of the different authflavors in the server's list if one was not specified at mount time. Once we have a successful ->create_server call, return the result. Only give up and return error if all attempts fail.

---
 fs/nfs/super.c | 150 ++++++++++++++++++++++++++++++---------------------------
 1 file changed, 80 insertions(+), 70 deletions(-)
fs/nfs/super.c +80 -70
index a0949f5..12ffd7d 100644
@@ -1608,29 +1608,13 @@ out_security_failure:
 }
 
 /*
- * Select a security flavor for this mount.  The selected flavor
- * is planted in args->auth_flavors[0].
- *
- * Returns 0 on success, -EACCES on failure.
+ * Ensure that the specified authtype in args->auth_flavors[0] is supported by
+ * the server. Returns 0 if it's ok, and -EACCES if not.
  */
-static int nfs_select_flavor(struct nfs_parsed_mount_data *args,
-			      struct nfs_mount_request *request)
+static int nfs_verify_authflavor(struct nfs_parsed_mount_data *args,
+			rpc_authflavor_t *server_authlist, unsigned int count)
 {
-	unsigned int i, count = *(request->auth_flav_len);
-	rpc_authflavor_t flavor;
-
-	/*
-	 * The NFSv2 MNT operation does not return a flavor list.
-	 */
-	if (args->mount_server.version != NFS_MNT3_VERSION)
-		goto out_default;
-
-	/*
-	 * Certain releases of Linux's mountd return an empty
-	 * flavor list in some cases.
-	 */
-	if (count == 0)
-		goto out_default;
+	unsigned int i;
 
 	/*
 	 * If the sec= mount option is used, the specified flavor or AUTH_NULL
@@ -1640,60 +1624,19 @@ static int nfs_select_flavor(struct nfs_parsed_mount_data *args,
 	 * means that the server will ignore the rpc creds, so any flavor
 	 * can be used.
 	 */
-	if (args->auth_flavors[0] != RPC_AUTH_MAXFLAVOR) {
-		for (i = 0; i < count; i++) {
-			if (args->auth_flavors[0] == request->auth_flavs[i] ||
-			    request->auth_flavs[i] == RPC_AUTH_NULL)
-				goto out;
-		}
-		dfprintk(MOUNT, "NFS: auth flavor %d not supported by server\n",
-			args->auth_flavors[0]);
-		goto out_err;
-	}
-
-	/*
-	 * RFC 2623, section 2.7 suggests we SHOULD prefer the
-	 * flavor listed first.  However, some servers list
-	 * AUTH_NULL first.  Avoid ever choosing AUTH_NULL.
-	 */
 	for (i = 0; i < count; i++) {
-		struct rpcsec_gss_info info;
-
-		flavor = request->auth_flavs[i];
-		switch (flavor) {
-		case RPC_AUTH_UNIX:
-			goto out_set;
-		case RPC_AUTH_NULL:
-			continue;
-		default:
-			if (rpcauth_get_gssinfo(flavor, &info) == 0)
-				goto out_set;
-		}
+		if (args->auth_flavors[0] == server_authlist[i] ||
+		    server_authlist[i] == RPC_AUTH_NULL)
+			goto out;
 	}
 
-	/*
-	 * As a last chance, see if the server list contains AUTH_NULL -
-	 * if it does, use the default flavor.
-	 */
-	for (i = 0; i < count; i++) {
-		if (request->auth_flavs[i] == RPC_AUTH_NULL)
-			goto out_default;
-	}
-
-	dfprintk(MOUNT, "NFS: no auth flavors in common with server\n");
-	goto out_err;
+	dfprintk(MOUNT, "NFS: auth flavor %u not supported by server\n",
+		args->auth_flavors[0]);
+	return -EACCES;
 
-out_default:
-	/* use default if flavor not already set */
-	flavor = (args->auth_flavors[0] == RPC_AUTH_MAXFLAVOR) ?
-		RPC_AUTH_UNIX : args->auth_flavors[0];
-out_set:
-	args->auth_flavors[0] = flavor;
 out:
-	dfprintk(MOUNT, "NFS: using auth flavor %d\n", args->auth_flavors[0]);
+	dfprintk(MOUNT, "NFS: using auth flavor %u\n", args->auth_flavors[0]);
 	return 0;
-out_err:
-	return -EACCES;
 }
 
 /*
@@ -1756,13 +1699,17 @@ static int nfs_request_mount(struct nfs_parsed_mount_data *args,
 		return status;
 	}
 
-	return nfs_select_flavor(args, &request);
+	return 0;
 }
 
 static struct nfs_server *nfs_try_mount_request(struct nfs_mount_info *mount_info,
 					struct nfs_subversion *nfs_mod)
 {
 	int status;
+	unsigned int i;
+	bool tried_auth_unix = false;
+	bool auth_null_in_list = false;
+	struct nfs_server *server = ERR_PTR(-EACCES);
 	struct nfs_parsed_mount_data *args = mount_info->parsed;
 	rpc_authflavor_t authlist[NFS_MAX_SECFLAVORS];
 	unsigned int authlist_len = ARRAY_SIZE(authlist);
@@ -1772,6 +1719,69 @@ static struct nfs_server *nfs_try_mount_request(struct nfs_mount_info *mount_inf
 	if (status)
 		return ERR_PTR(status);
 
+	/*
+	 * The NFSv2 MNT operation does not return a flavor list. Also, some
+	 * NFS servers (older Linux servers in particular) return an empty list.
+	 *
+	 * In that event fake up a list that just has RPC_AUTH_NULL in it since
+	 * we have no way to know what the server actually supports.
+	 */
+	if (args->mount_server.version != NFS_MNT3_VERSION ||
+	    authlist_len == 0) {
+		authlist[0] = RPC_AUTH_NULL;
+		authlist_len = 1;
+	}
+
+	/*
+	 * Was a sec= authflavor specified in the options? First, verify
+	 * whether the server supports it, and then just try to use it if so.
+	 */
+	if (args->auth_flavors[0] != RPC_AUTH_MAXFLAVOR) {
+		status = nfs_verify_authflavor(args, authlist, authlist_len);
+		dfprintk(MOUNT, "NFS: using auth flavor %u\n", args->auth_flavors[0]);
+		if (status)
+			return ERR_PTR(status);
+		return nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
+	}
+
+	/*
+	 * No sec= option was provided. RFC 2623, section 2.7 suggests we
+	 * SHOULD prefer the flavor listed first. However, some servers list
+	 * AUTH_NULL first. Avoid ever choosing AUTH_NULL.
+	 */
+	for (i = 0; i < authlist_len; ++i) {
+		rpc_authflavor_t flavor;
+		struct rpcsec_gss_info info;
+
+		flavor = authlist[i];
+		switch (flavor) {
+		case RPC_AUTH_UNIX:
+			tried_auth_unix = true;
+			break;
+		case RPC_AUTH_NULL:
+			auth_null_in_list = true;
+			continue;
+		default:
+			if (rpcauth_get_gssinfo(flavor, &info) != 0)
+				continue;
+			/* Fallthrough */
+		}
+		dfprintk(MOUNT, "NFS: attempting to use auth flavor %u\n", flavor);
+		args->auth_flavors[0] = flavor;
+		server = nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
+		if (!IS_ERR(server))
+			return server;
+	}
+
+	/*
+	 * Nothing we tried so far worked. As a last ditch effort, try to use
+	 * AUTH_UNIX if we haven't already, and AUTH_NULL was in server's list.
+	 */
+	if (tried_auth_unix || !auth_null_in_list)
+		return server;
+
+	dfprintk(MOUNT, "NFS: attempting to use auth flavor %u\n", RPC_AUTH_UNIX);
+	args->auth_flavors[0] = RPC_AUTH_UNIX;
 	return nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
 }
 
Signature · 1 line
1.8.1.4
#4 lore raw

Re: [PATCH v3 3/3] nfs: have NFSv3 try server-specified auth flavors in turn

Quoted 149 lines · Jeff Layton

The current scheme is to try and pick the auth flavor that the server prefers. In some cases though, we may find that we're not actually able to use that auth flavor later. For instance, the server may prefer an AUTH_GSS flavor, but we may not be able to get GSSAPI creds.

The current code just gives up at that point. Change it instead to try the ->create_server call using each of the different authflavors in the server's list if one was not specified at mount time. Once we have a successful ->create_server call, return the result. Only give up and return error if all attempts fail.

---
fs/nfs/super.c | 150 ++++++++++++++++++++++++++++++---------------------------

1 file changed, 80 insertions(+), 70 deletions(-)
fs/nfs/super.c +11 -66
index a0949f5..12ffd7d 100644
@@ -1608,29 +1608,13 @@ out_security_failure:
 }
 
 /*
- * Select a security flavor for this mount.  The selected flavor
- * is planted in args->auth_flavors[0].
- *
- * Returns 0 on success, -EACCES on failure.
+ * Ensure that the specified authtype in args->auth_flavors[0] is supported by
+ * the server. Returns 0 if it's ok, and -EACCES if not.
 */
-static int nfs_select_flavor(struct nfs_parsed_mount_data *args,
-			      struct nfs_mount_request *request)
+static int nfs_verify_authflavor(struct nfs_parsed_mount_data *args,
+			rpc_authflavor_t *server_authlist, unsigned int count)
 {
-	unsigned int i, count = *(request->auth_flav_len);
-	rpc_authflavor_t flavor;
-
-	/*
-	 * The NFSv2 MNT operation does not return a flavor list.
-	 */
-	if (args->mount_server.version != NFS_MNT3_VERSION)
-		goto out_default;
-
-	/*
-	 * Certain releases of Linux's mountd return an empty
-	 * flavor list in some cases.
-	 */
-	if (count == 0)
-		goto out_default;
+	unsigned int i;
 
 	/*
 	 * If the sec= mount option is used, the specified flavor or AUTH_NULL
@@ -1640,60 +1624,19 @@ static int nfs_select_flavor(struct nfs_parsed_mount_data *args,
 	 * means that the server will ignore the rpc creds, so any flavor
 	 * can be used.
 	 */
-	if (args->auth_flavors[0] != RPC_AUTH_MAXFLAVOR) {
-		for (i = 0; i < count; i++) {
-			if (args->auth_flavors[0] == request->auth_flavs[i] ||
-			    request->auth_flavs[i] == RPC_AUTH_NULL)
-				goto out;
-		}
-		dfprintk(MOUNT, "NFS: auth flavor %d not supported by server\n",
-			args->auth_flavors[0]);
-		goto out_err;
-	}
-
-	/*
-	 * RFC 2623, section 2.7 suggests we SHOULD prefer the
-	 * flavor listed first.  However, some servers list
-	 * AUTH_NULL first.  Avoid ever choosing AUTH_NULL.
-	 */
 	for (i = 0; i < count; i++) {
-		struct rpcsec_gss_info info;
-
-		flavor = request->auth_flavs[i];
-		switch (flavor) {
-		case RPC_AUTH_UNIX:
-			goto out_set;
-		case RPC_AUTH_NULL:
-			continue;
-		default:
-			if (rpcauth_get_gssinfo(flavor, &info) == 0)
-				goto out_set;
-		}
+		if (args->auth_flavors[0] == server_authlist[i] ||
+		    server_authlist[i] == RPC_AUTH_NULL)
+			goto out;
 	}
 
-	/*
-	 * As a last chance, see if the server list contains AUTH_NULL -
-	 * if it does, use the default flavor.
-	 */
-	for (i = 0; i < count; i++) {
-		if (request->auth_flavs[i] == RPC_AUTH_NULL)
-			goto out_default;
-	}
-
-	dfprintk(MOUNT, "NFS: no auth flavors in common with server\n");
-	goto out_err;
+	dfprintk(MOUNT, "NFS: auth flavor %u not supported by server\n",
+		args->auth_flavors[0]);
+	return -EACCES;
 
-out_default:
-	/* use default if flavor not already set */
-	flavor = (args->auth_flavors[0] == RPC_AUTH_MAXFLAVOR) ?
-		RPC_AUTH_UNIX : args->auth_flavors[0];
-out_set:
-	args->auth_flavors[0] = flavor;

out:

fs/nfs/super.c +1 -1
-	dfprintk(MOUNT, "NFS: using auth flavor %d\n", args->auth_flavors[0]);
+	dfprintk(MOUNT, "NFS: using auth flavor %u\n", args->auth_flavors[0]);
	return 0;
fs/nfs/super.c +0 -2
-out_err:
-	return -EACCES;

}

/*

fs/nfs/super.c +7 -1
@@ -1756,13 +1699,17 @@ static int nfs_request_mount(struct nfs_parsed_mount_data *args,
 		return status;
 	}
 
-	return nfs_select_flavor(args, &request);
+	return 0;
 }
 
 static struct nfs_server *nfs_try_mount_request(struct nfs_mount_info *mount_info,
 					struct nfs_subversion *nfs_mod)
 {
 	int status;
+	unsigned int i;
+	bool tried_auth_unix = false;
+	bool auth_null_in_list = false;
+	struct nfs_server *server = ERR_PTR(-EACCES);
 	struct nfs_parsed_mount_data *args = mount_info->parsed;
 	rpc_authflavor_t authlist[NFS_MAX_SECFLAVORS];
 	unsigned int authlist_len = ARRAY_SIZE(authlist);
@@ -1772,6 +1719,69 @@ static struct nfs_server *nfs_try_mount_request(struct nfs_mount_info *mount_inf
 	if (status)
 		return ERR_PTR(status);
 
+	/*
+	 * The NFSv2 MNT operation does not return a flavor list. Also, some

fs/nfs/super.c static struct nfs_server *nfs_try_mount_request(struct nfs_mount_info *mount_inf · line 1733

Quoted 10 lines
fs/nfs/super.c +10 -0
+	 * NFS servers (older Linux servers in particular) return an empty list.
+	 *
+	 * In that event fake up a list that just has RPC_AUTH_NULL in it since
+	 * we have no way to know what the server actually supports.
+	 */
+	if (args->mount_server.version != NFS_MNT3_VERSION ||
+	    authlist_len == 0) {
+		authlist[0] = RPC_AUTH_NULL;
+		authlist_len = 1;
+	}

Clever.

Instead of faking up the list here, you could construct the fake list in nfs_mount(). Then this code could assume there is always a non-empty list.

This is the same tactic we use in other places for NFSv2.

Quoted 61 lines
fs/nfs/super.c +51 -0
+
+	/*
+	 * Was a sec= authflavor specified in the options? First, verify
+	 * whether the server supports it, and then just try to use it if so.
+	 */
+	if (args->auth_flavors[0] != RPC_AUTH_MAXFLAVOR) {
+		status = nfs_verify_authflavor(args, authlist, authlist_len);
+		dfprintk(MOUNT, "NFS: using auth flavor %u\n", args->auth_flavors[0]);
+		if (status)
+			return ERR_PTR(status);
+		return nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
+	}
+
+	/*
+	 * No sec= option was provided. RFC 2623, section 2.7 suggests we
+	 * SHOULD prefer the flavor listed first. However, some servers list
+	 * AUTH_NULL first. Avoid ever choosing AUTH_NULL.
+	 */
+	for (i = 0; i < authlist_len; ++i) {
+		rpc_authflavor_t flavor;
+		struct rpcsec_gss_info info;
+
+		flavor = authlist[i];
+		switch (flavor) {
+		case RPC_AUTH_UNIX:
+			tried_auth_unix = true;
+			break;
+		case RPC_AUTH_NULL:
+			auth_null_in_list = true;
+			continue;
+		default:
+			if (rpcauth_get_gssinfo(flavor, &info) != 0)
+				continue;
+			/* Fallthrough */
+		}
+		dfprintk(MOUNT, "NFS: attempting to use auth flavor %u\n", flavor);
+		args->auth_flavors[0] = flavor;
+		server = nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
+		if (!IS_ERR(server))
+			return server;
+	}
+
+	/*
+	 * Nothing we tried so far worked. As a last ditch effort, try to use
+	 * AUTH_UNIX if we haven't already, and AUTH_NULL was in server's list.
+	 */
+	if (tried_auth_unix || !auth_null_in_list)
+		return server;
+
+	dfprintk(MOUNT, "NFS: attempting to use auth flavor %u\n", RPC_AUTH_UNIX);
+	args->auth_flavors[0] = RPC_AUTH_UNIX;
 	return nfs_mod->rpc_ops->create_server(mount_info, nfs_mod);
 }
 
Signature · 6 lines
1.8.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signature · 2 lines
Chuck Lever
chuck[dot]lever[at]oracle[dot]com