Skip to contentSkip to conversation

Introduce buffer synchronization framework

RFC PATCH Superseded Inki Dae 1 participant 3 messages Jul 12, 2013

Subsystems (5)

v5 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Inki Dae

author
#0 lore raw

v5 cover Introduce buffer synchronization framework

Hi all,

This patch set introduces a buffer synchronization framework based on DMA BUF[1] and based on ww-mutexes[2] for lock mechanism.

The purpose of this framework is to provide not only buffer access control to CPU and CPU, and CPU and DMA, and DMA and DMA but also easy-to-use interfaces for device drivers and user application. In addtion, this patch set suggests a way for enhancing performance.

For generic user mode interface, we have used fcntl system call[3]. As you know, user application sees a buffer object as a dma-buf file descriptor. So fcntl() call with the file descriptor means to lock some buffer region being managed by the dma-buf object.
For more detail, you can refer to the dma-buf-sync.txt in Documentation/

Moreover, we had tried to find how we could utilize limited hardware resources more using buffer synchronization mechanism. And finally, we have realized that it could enhance performance using multi threads with this buffer synchronization mechanism: DMA and CPU works individually so CPU could perform other works while DMA is performing some works, and vise versa.

However, in the conventional way, that is not easy to do so because DMA operation is depend on CPU operation, and vice versa.

Conventional way:
User Kernel
---------------------------------------------------------------------
CPU writes something to src
send the src to driver------------------------->
update DMA register
request DMA start(1)--------------------------->
DMA start
<---------completion signal(2)----------
CPU accesses dst

(1) Request DMA start after the CPU access to src buffer is completed.
(2) Access dst buffer after DMA access to the dst buffer is completed.

On the other hand, if there is something to control buffer access between CPU and DMA? The below shows that:

User(thread a) User(thread b) Kernel
---------------------------------------------------------------------
send a src to driver---------------------------------->
update DMA register
lock the src
request DMA start(1)---------->
CPU acccess to src
unlock the src lock src and dst
DMA start
<-------------completion signal(2)-------------
lock dst DMA completion
CPU access to dst unlock src and dst
unlock DST

(1) Try to start DMA operation while CPU is accessing the src buffer.
(2) Try CPU access to dst buffer while DMA is accessing the dst buffer.

This means that CPU or DMA could do more works.

In the same way, we could reduce hand shaking overhead between two processes when those processes need to share a shared buffer. There may be other cases that we could reduce overhead as well.

References:
[1] http://lwn.net/Articles/470339/
[2] https://patchwork.kernel.org/patch/2625361/
[3] http://linux.die.net/man/2/fcntl

Inki Dae (2):
[RFC PATCH v5 1/2] dmabuf-sync: Introduce buffer synchronization framework [RFC PATCH v1 2/2] dma-buf: add lock callback for fcntl system call

 Documentation/dma-buf-sync.txt |  290 +++++++++++++++++
 drivers/base/Kconfig           |    7 +
 drivers/base/Makefile          |    1 +
 drivers/base/dma-buf.c         |   37 +++
 drivers/base/dmabuf-sync.c     |  674 ++++++++++++++++++++++++++++++++++++++++
 include/linux/dma-buf.h        |   16 +
 include/linux/dmabuf-sync.h    |  178 +++++++++++
 7 files changed, 1203 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/dma-buf-sync.txt
 create mode 100644 drivers/base/dmabuf-sync.c
 create mode 100644 include/linux/dmabuf-sync.h
Signature · 1 line
1.7.5.4
author
#1 lore raw

RFC PATCH v5 1/2 dmabuf-sync: Introduce buffer synchronization framework

This patch adds a buffer synchronization framework based on DMA BUF[1] and and based on ww-mutexes[2] for lock mechanism.

The purpose of this framework is to provide not only buffer access control to CPU and DMA but also easy-to-use interfaces for device drivers and user application. This framework can be used for all dma devices using system memory as dma buffer, especially for most ARM based SoCs.

Changelog v5:
- Rmove a dependence on reservation_object: the reservation_object is used to hook up to ttm and dma-buf for easy sharing of reservations across devices. However, the dmabuf sync can be used for all dma devices; v4l2 and drm based drivers, so doesn't need the reservation_object anymore. With regared to this, it adds 'void *sync' to dma_buf structure.
- All patches are rebased on mainline, Linux v3.10.

Changelog v4:
- Add user side interface for buffer synchronization mechanism and update descriptions related to the user side interface.

Changelog v3:
- remove cache operation relevant codes and update document file.

Changelog v2:
- use atomic_add_unless to avoid potential bug.
- add a macro for checking valid access type.
- code clean.

The mechanism of this framework has the following steps,
1. Register dmabufs to a sync object - A task gets a new sync object and can add one or more dmabufs that the task wants to access.
This registering should be performed when a device context or an event context such as a page flip event is created or before CPU accesses a shared buffer.

dma_buf_sync_get(a sync object, a dmabuf);

2. Lock a sync object - A task tries to lock all dmabufs added in its own sync object. Basically, the lock mechanism uses ww-mutex[1] to avoid dead lock issue and for race condition between CPU and CPU, CPU and DMA, and DMA and DMA. Taking a lock means that others cannot access all locked dmabufs until the task that locked the corresponding dmabufs, unlocks all the locked dmabufs.
This locking should be performed before DMA or CPU accesses these dmabufs.

dma_buf_sync_lock(a sync object);

3. Unlock a sync object - The task unlocks all dmabufs added in its own sync object. The unlock means that the DMA or CPU accesses to the dmabufs have been completed so that others may access them.
This unlocking should be performed after DMA or CPU has completed accesses to the dmabufs.

dma_buf_sync_unlock(a sync object);

4. Unregister one or all dmabufs from a sync object - A task unregisters the given dmabufs from the sync object. This means that the task dosen't want to lock the dmabufs.
The unregistering should be performed after DMA or CPU has completed accesses to the dmabufs or when dma_buf_sync_lock() is failed.

dma_buf_sync_put(a sync object, a dmabuf); dma_buf_sync_put_all(a sync object);

The described steps may be summarized as:
get -> lock -> CPU or DMA access to a buffer/s -> unlock -> put

This framework includes the following two features.
1. read (shared) and write (exclusive) locks - A task is required to declare the access type when the task tries to register a dmabuf;
READ, WRITE, READ DMA, or WRITE DMA.

The below is example codes,
struct dmabuf_sync *sync;

sync = dmabuf_sync_init(NULL, "test sync");

dmabuf_sync_get(sync, dmabuf, DMA_BUF_ACCESS_R);
...

And the below can be used as access types:
DMA_BUF_ACCESS_R - CPU will access a buffer for read. DMA_BUF_ACCESS_W - CPU will access a buffer for read or write. DMA_BUF_ACCESS_DMA_R - DMA will access a buffer for read DMA_BUF_ACCESS_DMA_W - DMA will access a buffer for read or
write.

2. Mandatory resource releasing - a task cannot hold a lock indefinitely. A task may never try to unlock a buffer after taking a lock to the buffer. In this case, a timer handler to the corresponding sync object is called in five (default) seconds and then the timed-out buffer is unlocked by work queue handler to avoid lockups and to enforce resources of the buffer.

The below is how to use interfaces for device driver:

	1. Allocate and Initialize a sync object:
		struct dmabuf_sync *sync;

		sync = dmabuf_sync_init(NULL, "test sync");
		...

	2. Add a dmabuf to the sync object when setting up dma buffer relevant
	   registers:
		dmabuf_sync_get(sync, dmabuf, DMA_BUF_ACCESS_READ);
		...

	3. Lock all dmabufs of the sync object before DMA or CPU accesses
	   the dmabufs:
		dmabuf_sync_lock(sync);
		...

	4. Now CPU or DMA can access all dmabufs locked in step 3.

	5. Unlock all dmabufs added in a sync object after DMA or CPU access
	   to these dmabufs is completed:
		dmabuf_sync_unlock(sync);

	   And call the following functions to release all resources,
		dmabuf_sync_put_all(sync);
		dmabuf_sync_fini(sync);

	You can refer to actual example codes:
		"drm/exynos: add dmabuf sync support for g2d driver" and
		"drm/exynos: add dmabuf sync support for kms framework" from
		https://git.kernel.org/cgit/linux/kernel/git/daeinki/
		drm-exynos.git/log/?h=dmabuf-sync

And this framework includes fcntl system call[3] as interfaces exported to user. As you know, user sees a buffer object as a dma-buf file descriptor. So fcntl() call with the file descriptor means to lock some buffer region being managed by the dma-buf object.

The below is how to use interfaces for user application:

	struct flock filelock;

	1. Lock a dma buf:
		filelock.l_type = F_WRLCK or F_RDLCK;

		/* lock entire region to the dma buf. */
		filelock.lwhence = SEEK_CUR;
		filelock.l_start = 0;
		filelock.l_len = 0;

		fcntl(dmabuf fd, F_SETLKW or F_SETLK, &filelock);
		...
		CPU access to the dma buf

	2. Unlock a dma buf:
		filelock.l_type = F_UNLCK;

		fcntl(dmabuf fd, F_SETLKW or F_SETLK, &filelock);

		close(dmabuf fd) call would also unlock the dma buf. And for more
		detail, please refer to [3]

References:
[1] http://lwn.net/Articles/470339/
[2] https://patchwork.kernel.org/patch/2625361/
[3] http://linux.die.net/man/2/fcntl

---
 Documentation/dma-buf-sync.txt |  290 +++++++++++++++++
 drivers/base/Kconfig           |    7 +
 drivers/base/Makefile          |    1 +
 drivers/base/dma-buf.c         |    4 +
 drivers/base/dmabuf-sync.c     |  674 ++++++++++++++++++++++++++++++++++++++++
 include/linux/dma-buf.h        |   16 +
 include/linux/dmabuf-sync.h    |  178 +++++++++++
 7 files changed, 1170 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/dma-buf-sync.txt
 create mode 100644 drivers/base/dmabuf-sync.c
 create mode 100644 include/linux/dmabuf-sync.h
Documentation/dma-buf-sync.txt new file +290 -0
new file mode 100644
index 0000000..4427759
@@ -0,0 +1,290 @@
+                    DMA Buffer Synchronization Framework
+                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+                                  Inki Dae
+                      <inki dot dae at samsung dot com>
+                          <daeinki at gmail dot com>
+
+This document is a guide for device-driver writers describing the DMA buffer
+synchronization API. This document also describes how to use the API to
+use buffer synchronization mechanism between DMA and DMA, CPU and DMA, and
+CPU and CPU.
+
+The DMA Buffer synchronization API provides buffer synchronization mechanism;
+i.e., buffer access control to CPU and DMA, and easy-to-use interfaces for
+device drivers and user application. And this API can be used for all dma
+devices using system memory as dma buffer, especially for most ARM based SoCs.
+
+
+Motivation
+----------
+
+Buffer synchronization issue between DMA and DMA:
+	Sharing a buffer, a device cannot be aware of when the other device
+	will access the shared buffer: a device may access a buffer containing
+	wrong data if the device accesses the shared buffer while another
+	device is still accessing the shared buffer.
+	Therefore, a user process should have waited for the completion of DMA
+	access by another device before a device tries to access the shared
+	buffer.
+
+Buffer synchronization issue between CPU and DMA:
+	A user process should consider that when having to send a buffer, filled
+	by CPU, to a device driver for the device driver to access the buffer as
+	a input buffer while CPU and DMA are sharing the buffer.
+	This means that the user process needs to understand how the device
+	driver is worked. Hence, the conventional mechanism not only makes
+	user application complicated but also incurs performance overhead.
+
+Buffer synchronization issue between CPU and CPU:
+	In case that two processes share one buffer; shared with DMA also,
+	they may need some mechanism to allow process B to access the shared
+	buffer after the completion of CPU access by process A.
+	Therefore, process B should have waited for the completion of CPU access
+	by process A using the mechanism before trying to access the shared
+	buffer.
+
+What is the best way to solve these buffer synchronization issues?
+	We may need a common object that a device driver and a user process
+	notify the common object of when they try to access a shared buffer.
+	That way we could decide when we have to allow or not to allow for CPU
+	or DMA to access the shared buffer through the common object.
+	If so, what could become the common object? Right, that's a dma-buf[1].
+	Now we have already been using the dma-buf to share one buffer with
+	other drivers.
+
+How we can utilize multi threads for more performance?
+	DMA and CPU works individually. So CPU could perform other works while
+	DMA are performing some works, and vise versa.
+	However, in the conventional way, that is not easy to do so because
+	DMA operation is depend on CPU operation, and vice versa.
+
+	Conventional way:
+        User                                     Kernel
+        ---------------------------------------------------------------------
+        CPU writes something to src
+        send the src to driver------------------------->
+                                                 update DMA register
+        request DMA start(1)--------------------------->
+                                                 DMA start
+                <---------completion signal(2)----------
+        CPU accesses dst
+
+        (1) Request DMA start after the CPU access to src buffer is completed.
+        (2) Access dst buffer after DMA access to the dst buffer is completed.
+
+On the other hand, if there is something to control buffer access between CPU
+and DMA? The below shows that:
+
+        User(thread a)          User(thread b)            Kernel
+        ---------------------------------------------------------------------
+        send a src to driver---------------------------------->
+                                                          update DMA register
+        lock the src
+                                request DMA start(1)---------->
+        CPU acccess to src
+        unlock the src                                    lock src and dst
+                                                          DMA start
+                <-------------completion signal(2)-------------
+        lock dst                                          DMA completion
+        CPU access to dst                                 unlock src and dst
+        unlock DST
+
+        (1) Try to start DMA operation while CPU is accessing the src buffer.
+        (2) Try CPU access to dst buffer while DMA is accessing the dst buffer.
+
+	In the same way, we could reduce hand shaking overhead between
+	two processes when those processes need to share a shared buffer.
+	There may be other cases that we could reduce overhead as well.
+
+
+Basic concept
+-------------
+
+The mechanism of this framework has the following steps,
+    1. Register dmabufs to a sync object - A task gets a new sync object and
+    can add one or more dmabufs that the task wants to access.
+    This registering should be performed when a device context or an event
+    context such as a page flip event is created or before CPU accesses a shared
+    buffer.
+
+	dma_buf_sync_get(a sync object, a dmabuf);
+
+    2. Lock a sync object - A task tries to lock all dmabufs added in its own
+    sync object. Basically, the lock mechanism uses ww-mutexes[2] to avoid dead
+    lock issue and for race condition between CPU and CPU, CPU and DMA, and DMA
+    and DMA. Taking a lock means that others cannot access all locked dmabufs
+    until the task that locked the corresponding dmabufs, unlocks all the locked
+    dmabufs.
+    This locking should be performed before DMA or CPU accesses these dmabufs.
+
+	dma_buf_sync_lock(a sync object);
+
+    3. Unlock a sync object - The task unlocks all dmabufs added in its own sync
+    object. The unlock means that the DMA or CPU accesses to the dmabufs have
+    been completed so that others may access them.
+    This unlocking should be performed after DMA or CPU has completed accesses
+    to the dmabufs.
+
+	dma_buf_sync_unlock(a sync object);
+
+    4. Unregister one or all dmabufs from a sync object - A task unregisters
+    the given dmabufs from the sync object. This means that the task dosen't
+    want to lock the dmabufs.
+    The unregistering should be performed after DMA or CPU has completed
+    accesses to the dmabufs or when dma_buf_sync_lock() is failed.
+
+	dma_buf_sync_put(a sync object, a dmabuf);
+	dma_buf_sync_put_all(a sync object);
+
+    The described steps may be summarized as:
+	get -> lock -> CPU or DMA access to a buffer/s -> unlock -> put
+
+This framework includes the following two features.
+    1. read (shared) and write (exclusive) locks - A task is required to declare
+    the access type when the task tries to register a dmabuf;
+    READ, WRITE, READ DMA, or WRITE DMA.
+
+    The below is example codes,
+	struct dmabuf_sync *sync;
+
+	sync = dmabuf_sync_init(NULL, "test sync");
+
+	dmabuf_sync_get(sync, dmabuf, DMA_BUF_ACCESS_R);
+	...
+
+    2. Mandatory resource releasing - a task cannot hold a lock indefinitely.
+    A task may never try to unlock a buffer after taking a lock to the buffer.
+    In this case, a timer handler to the corresponding sync object is called
+    in five (default) seconds and then the timed-out buffer is unlocked by work
+    queue handler to avoid lockups and to enforce resources of the buffer.
+
+
+Access types
+------------
+
+DMA_BUF_ACCESS_R - CPU will access a buffer for read.
+DMA_BUF_ACCESS_W - CPU will access a buffer for read or write.
+DMA_BUF_ACCESS_DMA_R - DMA will access a buffer for read
+DMA_BUF_ACCESS_DMA_W - DMA will access a buffer for read or write.
+
+
+Generic user interfaces
+-----------------------
+
+And this framework includes fcntl system call[3] as interfaces exported
+to user. As you know, user sees a buffer object as a dma-buf file descriptor.
+So fcntl() call with the file descriptor means to lock some buffer region being
+managed by the dma-buf object.
+
+
+API set
+-------
+
+bool is_dmabuf_sync_supported(void)
+	- Check if dmabuf sync is supported or not.
+
+struct dmabuf_sync *dmabuf_sync_init(void *priv, const char *name)
+	- Allocate and initialize a new sync object. The caller can get a new
+	sync object for buffer synchronization. priv is used to set caller's
+	private data and name is the name of sync object.
+
+void dmabuf_sync_fini(struct dmabuf_sync *sync)
+	- Release all resources to the sync object.
+
+int dmabuf_sync_get(struct dmabuf_sync *sync, void *sync_buf,
+			unsigned int type)
+	- Get dmabuf sync object. Internally, this function allocates
+	a dmabuf_sync object and adds a given dmabuf to it, and also takes
+	a reference to the dmabuf. The caller can tie up multiple dmabufs
+	into one sync object by calling this function several times.
+
+void dmabuf_sync_put(struct dmabuf_sync *sync, struct dma_buf *dmabuf)
+	- Put dmabuf sync object to a given dmabuf. Internally, this function
+	removes a given dmabuf from a sync object and remove the sync object.
+	At this time, the dmabuf is putted.
+
+void dmabuf_sync_put_all(struct dmabuf_sync *sync)
+	- Put dmabuf sync object to dmabufs. Internally, this function removes
+	all dmabufs from a sync object and remove the sync object.
+	At this time, all dmabufs are putted.
+
+int dmabuf_sync_lock(struct dmabuf_sync *sync)
+	- Lock all dmabufs added in a sync object. The caller should call this
+	function prior to CPU or DMA access to the dmabufs so that others can
+	not access the dmabufs. Internally, this function avoids dead lock
+	issue with ww-mutexes.
+
+int dmabuf_sync_single_lock(struct dma_buf *dmabuf)
+	- Lock a dmabuf. The caller should call this
+	function prior to CPU or DMA access to the dmabuf so that others can
+	not access the dmabuf.
+
+int dmabuf_sync_unlock(struct dmabuf_sync *sync)
+	- Unlock all dmabufs added in a sync object. The caller should call
+	this function after CPU or DMA access to the dmabufs is completed so
+	that others can access the dmabufs.
+
+void dmabuf_sync_single_unlock(struct dma_buf *dmabuf)
+	- Unlock a dmabuf. The caller should call this function after CPU or
+	DMA access to the dmabuf is completed so that others can access
+	the dmabuf.
+
+
+Tutorial for device driver
+--------------------------
+
+1. Allocate and Initialize a sync object:
+	struct dmabuf_sync *sync;
+
+	sync = dmabuf_sync_init(NULL, "test sync");
+	...
+
+2. Add a dmabuf to the sync object when setting up dma buffer relevant registers:
+	dmabuf_sync_get(sync, dmabuf, DMA_BUF_ACCESS_READ);
+	...
+
+3. Lock all dmabufs of the sync object before DMA or CPU accesses the dmabufs:
+	dmabuf_sync_lock(sync);
+	...
+
+4. Now CPU or DMA can access all dmabufs locked in step 3.
+
+5. Unlock all dmabufs added in a sync object after DMA or CPU access to these
+   dmabufs is completed:
+	dmabuf_sync_unlock(sync);
+
+   And call the following functions to release all resources,
+	dmabuf_sync_put_all(sync);
+	dmabuf_sync_fini(sync);
+
+
+Tutorial for user application
+-----------------------------
+	struct flock filelock;
+
+1. Lock a dma buf:
+	filelock.l_type = F_WRLCK or F_RDLCK;
+
+	/* lock entire region to the dma buf. */
+	filelock.lwhence = SEEK_CUR;
+	filelock.l_start = 0;
+	filelock.l_len = 0;
+
+	fcntl(dmabuf fd, F_SETLKW or F_SETLK, &filelock);
+	...
+	CPU access to the dma buf
+
+2. Unlock a dma buf:
+	filelock.l_type = F_UNLCK;
+
+	fcntl(dmabuf fd, F_SETLKW or F_SETLK, &filelock);
+
+	close(dmabuf fd) call would also unlock the dma buf. And for more
+	detail, please refer to [3]
+
+
+References:
+[1] http://lwn.net/Articles/470339/
+[2] https://patchwork.kernel.org/patch/2625361/
+[3] http://linux.die.net/man/2/fcntl
drivers/base/Kconfig +7 -0
index 5daa259..35e1518 100644
@@ -200,6 +200,13 @@ config DMA_SHARED_BUFFER
 	  APIs extension; the file's descriptor can then be passed on to other
 	  driver.
 
+config DMABUF_SYNC
+	bool "DMABUF Synchronization Framework"
+	depends on DMA_SHARED_BUFFER
+	help
+	  This option enables dmabuf sync framework for buffer synchronization between
+	  DMA and DMA, CPU and DMA, and CPU and CPU.
+
 config CMA
 	bool "Contiguous Memory Allocator"
 	depends on HAVE_DMA_CONTIGUOUS && HAVE_MEMBLOCK
drivers/base/Makefile +1 -0
index 48029aa..e06a5d7 100644
@@ -11,6 +11,7 @@ obj-y			+= power/
 obj-$(CONFIG_HAS_DMA)	+= dma-mapping.o
 obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o
 obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf.o reservation.o
+obj-$(CONFIG_DMABUF_SYNC) += dmabuf-sync.o
 obj-$(CONFIG_ISA)	+= isa.o
 obj-$(CONFIG_FW_LOADER)	+= firmware_class.o
 obj-$(CONFIG_NUMA)	+= node.o
drivers/base/dma-buf.c +4 -0
index 08fe897..9a26981 100644
@@ -29,6 +29,7 @@
 #include <linux/export.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
+#include <linux/dmabuf-sync.h>
 
 static inline int is_dma_buf_file(struct file *);
 
@@ -56,6 +57,8 @@ static int dma_buf_release(struct inode *inode, struct file *file)
 	list_del(&dmabuf->list_node);
 	mutex_unlock(&db_list.lock);
 
+	dmabuf_sync_reservation_fini(dmabuf);
+
 	kfree(dmabuf);
 	return 0;
 }
@@ -134,6 +137,7 @@ struct dma_buf *dma_buf_export_named(void *priv, const struct dma_buf_ops *ops,
 
 	file = anon_inode_getfile("dmabuf", &dma_buf_fops, dmabuf, flags);
 
+	dmabuf_sync_reservation_init(dmabuf);
 	dmabuf->file = file;
 
 	mutex_init(&dmabuf->lock);
drivers/base/dmabuf-sync.c new file +674 -0

674 lines not on this page · raw message

include/linux/dma-buf.h +16 -0
index dfac5ed..0109673 100644
@@ -115,6 +115,7 @@ struct dma_buf_ops {
  * @exp_name: name of the exporter; useful for debugging.
  * @list_node: node for dma_buf accounting and debugging.
  * @priv: exporter specific private data for this buffer object.
+ * @sync: sync object linked to this dma-buf
  */
 struct dma_buf {
 	size_t size;
@@ -128,6 +129,7 @@ struct dma_buf {
 	const char *exp_name;
 	struct list_head list_node;
 	void *priv;
+	void *sync;
 };
 
 /**
@@ -148,6 +150,20 @@ struct dma_buf_attachment {
 	void *priv;
 };
 
+#define	DMA_BUF_ACCESS_R	0x1
+#define DMA_BUF_ACCESS_W	0x2
+#define DMA_BUF_ACCESS_DMA	0x4
+#define DMA_BUF_ACCESS_RW	(DMA_BUF_ACCESS_R | DMA_BUF_ACCESS_W)
+#define DMA_BUF_ACCESS_DMA_R	(DMA_BUF_ACCESS_R | DMA_BUF_ACCESS_DMA)
+#define DMA_BUF_ACCESS_DMA_W	(DMA_BUF_ACCESS_W | DMA_BUF_ACCESS_DMA)
+#define DMA_BUF_ACCESS_DMA_RW	(DMA_BUF_ACCESS_DMA_R | DMA_BUF_ACCESS_DMA_W)
+#define IS_VALID_DMA_BUF_ACCESS_TYPE(t)	(t == DMA_BUF_ACCESS_R || \
+					 t == DMA_BUF_ACCESS_W || \
+					 t == DMA_BUF_ACCESS_DMA_R || \
+					 t == DMA_BUF_ACCESS_DMA_W || \
+					 t == DMA_BUF_ACCESS_RW || \
+					 t == DMA_BUF_ACCESS_DMA_RW)
+
 /**
  * get_dma_buf - convenience wrapper for get_file.
  * @dmabuf:	[in]	pointer to dma_buf
include/linux/dmabuf-sync.h new file +178 -0

178 lines not on this page · raw message

Signature · 1 line
1.7.5.4
author
#2 lore raw

RFC PATCH 2/2 dma-buf: add lock callback for fcntl system call

In reply to Inki Dae

This patch adds lock callback to dma buf file operations, and this callback will be called by fcntl system call.

With this patch, fcntl system call can be used for buffer synchronization between CPU and CPU, and CPU and DMA in user mode.

---
 drivers/base/dma-buf.c |   33 +++++++++++++++++++++++++++++++++
 1 files changed, 33 insertions(+), 0 deletions(-)
drivers/base/dma-buf.c +33 -0
index 9a26981..e1b8583 100644
@@ -80,9 +80,42 @@ static int dma_buf_mmap_internal(struct file *file, struct vm_area_struct *vma)
 	return dmabuf->ops->mmap(dmabuf, vma);
 }
 
+static int dma_buf_lock(struct file *file, int cmd, struct file_lock *fl)
+{
+	struct dma_buf *dmabuf;
+	unsigned int type;
+	bool wait = false;
+
+	if (!is_dma_buf_file(file))
+		return -EINVAL;
+
+	dmabuf = file->private_data;
+
+	if ((fl->fl_type & F_UNLCK) == F_UNLCK) {
+		dmabuf_sync_single_unlock(dmabuf);
+		return 0;
+	}
+
+	/* convert flock type to dmabuf sync type. */
+	if ((fl->fl_type & F_WRLCK) == F_WRLCK)
+		type = DMA_BUF_ACCESS_W;
+	else if ((fl->fl_type & F_RDLCK) == F_RDLCK)
+		type = DMA_BUF_ACCESS_R;
+	else
+		return -EINVAL;
+
+	if (fl->fl_flags & FL_SLEEP)
+		wait = true;
+
+	/* TODO. the locking to certain region should also be considered. */
+
+	return dmabuf_sync_single_lock(dmabuf, type, wait);
+}
+
 static const struct file_operations dma_buf_fops = {
 	.release	= dma_buf_release,
 	.mmap		= dma_buf_mmap_internal,
+	.lock		= dma_buf_lock,
 };
 
 /*
Signature · 1 line
1.7.5.4