Skip to contentSkip to conversation

ARM: dts: mx6: Add support for mx6q nitrogen board

PATCH New Fabio Estevam 2 participants 4 messages Jul 22, 2013

Subsystems (3)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH v2 1/2 ARM: dts: mx6: Add support for mx6q nitrogen board

From: Fabio Estevam <[email protected]>

mx6q sabrelite and nitrogen boards are hardware compatible.

Boundary Devices have a line of nitrogen boards based on quad/dual-lite and solo variants.

Let's consolidate the common peripheral nodes into imx6qdl-nitrogen.dtsi and add support for the mx6 quad nitrogen board.

---
 arch/arm/boot/dts/Makefile              |   1 +
 arch/arm/boot/dts/imx6q-nitrogen.dts    |  27 ++++++
 arch/arm/boot/dts/imx6q-sabrelite.dts   | 148 +----------------------------
 arch/arm/boot/dts/imx6qdl-nitrogen.dtsi | 161 ++++++++++++++++++++++++++++++++
 4 files changed, 190 insertions(+), 147 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6q-nitrogen.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen.dtsi
arch/arm/boot/dts/Makefile +1 -0
index db510b3..d523340 100644
@@ -128,6 +128,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6dl-sabresd.dtb \
 	imx6dl-wandboard.dtb \
 	imx6q-arm2.dtb \
+	imx6q-nitrogen.dtb \
 	imx6q-phytec-pbab01.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
arch/arm/boot/dts/imx6q-nitrogen.dts new file +27 -0
new file mode 100644
index 0000000..0ac5c59
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen Board";
+	compatible = "boundary,imx6q-nitrogen", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
arch/arm/boot/dts/imx6q-sabrelite.dts +1 -147

162 lines not on this page · raw message

arch/arm/boot/dts/imx6qdl-nitrogen.dtsi new file +161 -0

161 lines not on this page · raw message

Signature · 1 line
1.8.1.2
author reviewer
#1 lore raw

PATCH v2 1/2 ARM: dts: mx6: Add support for mx6q nitrogen board

Hi Shawn,

Quoted 11 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

mx6q sabrelite and nitrogen boards are hardware compatible.

Boundary Devices have a line of nitrogen boards based on quad/dual-lite and solo variants.

Let's consolidate the common peripheral nodes into imx6qdl-nitrogen.dtsi and add support for the mx6 quad nitrogen board.

I missed to add:

Changes since v1:

- Put the nodes in alphabetical order
- Also add sata node for sabrelite

author reviewer
#2 lore raw

PATCH v2 2/2 ARM: dts: mx6: Add support for imx6dl nitrogen board

In reply to Fabio Estevam

From: Fabio Estevam <[email protected]>

---
Changes since v1:
- None

 arch/arm/boot/dts/Makefile            |  1 +
 arch/arm/boot/dts/imx6dl-nitrogen.dts | 27 +++++++++++++++++++++++++++
 2 files changed, 28 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-nitrogen.dts
arch/arm/boot/dts/Makefile +1 -0
index eeb2275..3f1a75d 100644
@@ -124,6 +124,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx53-mba53.dtb \
 	imx53-qsb.dtb \
 	imx53-smd.dtb \
+	imx6dl-nitrogen.dtb \
 	imx6dl-sabreauto.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-wandboard.dtb \
arch/arm/boot/dts/imx6dl-nitrogen.dts new file +27 -0
new file mode 100644
index 0000000..d1ba3fc
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Dual Lite Nitrogen Board";
+	compatible = "boundary,imx6dl-nitrogen", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
Signature · 1 line
1.8.1.2
#3 lore raw

PATCH v2 1/2 ARM: dts: mx6: Add support for mx6q nitrogen board

In reply to Fabio Estevam
Quoted 113 lines
arch/arm/boot/dts/imx6qdl-nitrogen.dtsi new file +107 -0
new file mode 100644
index 0000000..948063e
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+       regulators {
+               compatible = "simple-bus";
+
+               reg_2p5v: 2p5v {
+                       compatible = "regulator-fixed";
+                       regulator-name = "2P5V";
+                       regulator-min-microvolt = <2500000>;
+                       regulator-max-microvolt = <2500000>;
+                       regulator-always-on;
+               };
+
+               reg_3p3v: 3p3v {
+                       compatible = "regulator-fixed";
+                       regulator-name = "3P3V";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+               reg_usb_otg_vbus: usb_otg_vbus {
+                       compatible = "regulator-fixed";
+                       regulator-name = "usb_otg_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio3 22 0>;
+                       enable-active-high;
+               };
+       };
+
+       sound {
+               compatible = "fsl,imx6q-sabrelite-sgtl5000",
+                            "fsl,imx-audio-sgtl5000";
+               model = "imx6q-sabrelite-sgtl5000";
+               ssi-controller = <&ssi1>;
+               audio-codec = <&codec>;
+               audio-routing =
+                       "MIC_IN", "Mic Jack",
+                       "Mic Jack", "Mic Bias",
+                       "Headphone Jack", "HP_OUT";
+               mux-int-port = <1>;
+               mux-ext-port = <4>;
+       };
+};
+
+&audmux {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
+&ecspi1 {
+       fsl,spi-num-chipselects = <1>;
+       cs-gpios = <&gpio3 19 0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ecspi1_1>;
+       status = "okay";
+
+       flash: m25p80 at 0 {
+               compatible = "sst,sst25vf016b";
+               spi-max-frequency = <20000000>;
+               reg = <0>;
+       };
+};
+
+&i2c1 {
+       status = "okay";
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1_1>;
+
+       codec: sgtl5000 at 0a {
+               compatible = "fsl,sgtl5000";
+               reg = <0x0a>;
+               clocks = <&clks 169>;
+               VDDA-supply = <&reg_2p5v>;
+               VDDIO-supply = <&reg_3p3v>;
+       };
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hog>;
+
+       hog {
+               pinctrl_hog: hoggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
+                               MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
+                               MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+                               MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
+                               MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
+                               MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000

arch/arm/boot/dts/imx6qdl-nitrogen.dtsi line 117

Quoted 10 lines
arch/arm/boot/dts/imx6qdl-nitrogen.dtsi new file +10 -0
+                       >;
+               };
+       };
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet_1>;
+       phy-mode = "rgmii";
+       phy-reset-gpios = <&gpio3 23 0>;

This reset gpio is only good for the sabrelite, the Nitrogen use a different gpio..

"phy-reset-gpios = <&gpio1 27 0>;"...

https://github.com/boundarydevices/u-boot-2009-08/commit/965c16903f3b15c24634b95feff85b8f14a31c66#L0R704
http://boundarydevices.com/differences-sabre-lite-nitrogen6x-and-som/

Regards,

Signature · 2 lines
Robert Nelson
http://www.rcn-ee.com/