Skip to contentSkip to conversation

dts: wandboard: Add support for SDIO bcm4329

PATCH Applied Tony Prisk 2 participants 2 messages Jul 28, 2013 – Jul 30, 2013

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Tony Prisk

author
#0 lore raw

PATCH 1/1 dts: wandboard: Add support for SDIO bcm4329

The wandboard has a Broadcom 4329 WiFi connected via SDIO. This patch sets the required pins to enable the wifi module.

Signed-off-by Tony Prisk <[email protected]>
---
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
arch/arm/boot/dts/imx6qdl-wandboard.dtsi +8 -3
index 7a46f64..2fb0e9b 100644
@@ -73,9 +73,14 @@
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1 	0x130b0
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x80000000
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09	0x80000000
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1 	 0x130b0
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	 0x80000000
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09	 0x80000000
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29   0x80000000 /* WL_REF_ON */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02   0x80000000 /* WL_RST_N */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
 			>;
 		};
 	};
Signature · 1 line
1.7.9.5
Applied
#1 lore raw
Quoted 4 lines · Tony Prisk

The wandboard has a Broadcom 4329 WiFi connected via SDIO. This patch sets the required pins to enable the wifi module.

Signed-off-by Tony Prisk <[email protected]>

Applied, thanks.