Skip to contentSkip to conversation

6lowpan: handle only real link-local addresses

PATCH In review Alexander Aring 4 participants 10 messages Aug 13, 2013 – Aug 14, 2013 1 message not in the archive

Subsystems (3)
Networking Network drivers IEEE 802.15.4
lore
Share & tools
lore

Alexander Aring

author maintainer
#0 lore raw

PATCH 1/1 6lowpan: handle only real link-local addresses

A link-local address isn't fe80::/10 it's fe80::/64 see http://tools.ietf.org/html/rfc4291#section-2.5.6
for more details.

Also fix a comment issue "local link" -> "link-local"

Signed-off-by Alexander Aring <[email protected]>
---
 net/ieee802154/6lowpan.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/ieee802154/6lowpan.h +5 -2
index 4b8f917..61f0ce9 100644
@@ -83,8 +83,11 @@
 #define ipaddr_prefixcmp(addr1, addr2, length) \
 	(memcmp(addr1, addr2, length >> 3) == 0)
 
-/* local link, i.e. FE80::/10 */
-#define is_addr_link_local(a) (((a)->s6_addr16[0]) == htons(0xFE80))
+/* link-local, i.e. FE80::/64 */
+#define is_addr_link_local(a) (((a)->s6_addr16[0]) == htons(0xFE80) &&	\
+		(((a)->s6_addr16[1]) == 0) &&	\
+		(((a)->s6_addr16[2]) == 0) &&	\
+		(((a)->s6_addr16[3]) == 0))
 
 /*
  * check whether we can compress the IID to 16 bits,
Signature · 1 line
1.8.3.3
author maintainer
#1 lore raw

cover 6lowpan: uncompress of addresses fix

The current implementation to uncompress addresses in a 6lowpan header is completely broken.

This patch series fixes the parsing of addresses in a 6lowpan header. It contains a major rewrite of the uncompress address function to parse the address in a correct way.

Alexander Aring (5):
6lowpan: init ipv6hdr buffer to zero 6lowpan: introduce lowpan_fetch_skb function 6lowpan: add function to uncompress multicast addr 6lowpan: lowpan_uncompress_addr with address_mode 6lowpan: handle context based source address

David Hauweele (1):
6lowpan: Fix fragmentation with link-local compressed addresses

 net/ieee802154/6lowpan.c | 284 +++++++++++++++++++++++++++++++----------------
 net/ieee802154/6lowpan.h |  20 +++-
 2 files changed, 203 insertions(+), 101 deletions(-)
Signature · 1 line
1.8.3.3
author maintainer
#2 lore raw

PATCH 4/6 6lowpan: add function to uncompress multicast addr

In reply to Alexander Aring

Add function to uncompress multicast address.
This function split the uncompress function for a multicast address in a seperate function.

To uncompress a multicast address is different than a other non-multicasts addresses according to rfc6282.

Signed-off-by Alexander Aring <[email protected]>
---
 net/ieee802154/6lowpan.c | 78 ++++++++++++++++++++++++++++++++++++------------
 1 file changed, 59 insertions(+), 19 deletions(-)
net/ieee802154/6lowpan.c +59 -19
index 632b3fd..0df8874 100644
@@ -88,15 +88,6 @@ static const u8 lowpan_unc_llconf[] = {0x0f, 0x28, 0x22, 0x20};
  */
 static const u8 lowpan_unc_ctxconf[] = {0x00, 0x88, 0x82, 0x80};
 
-/*
- * Uncompression of ctx-base
- *   0 -> 0 bits from packet
- *   1 -> 2 bytes from prefix - bunch of zeroes 5 from packet
- *   2 -> 2 bytes from prefix - zeroes + 3 from packet
- *   3 -> 2 bytes from prefix - infer 1 bytes from lladdr
- */
-static const u8 lowpan_unc_mxconf[] = {0x0f, 0x25, 0x23, 0x21};
-
 /* Link local prefix */
 static const u8 lowpan_llprefix[] = {0xfe, 0x80};
 

@@ -240,6 +231,63 @@ lowpan_uncompress_addr(struct sk_buff *skb, struct in6_addr *ipaddr,
 	return 0;
 }
 
+/* Uncompress function for multicast destination address,
+ * when M bit is set.
+ */
+static int
+lowpan_uncompress_multicast_daddr(struct sk_buff *skb,
+		struct in6_addr *ipaddr,
+		const u8 dam)
+{
+	bool fail;
+
+	switch (dam) {
+	case LOWPAN_IPHC_DAM_00:
+		/* 00:  128 bits.  The full address
+		 * is carried in-line.
+		 */
+		fail = lowpan_fetch_skb(skb, ipaddr->s6_addr, 16);
+		break;
+	case LOWPAN_IPHC_DAM_01:
+		/* 01:  48 bits.  The address takes
+		 * the form ffXX::00XX:XXXX:XXXX.
+		 */
+		ipaddr->s6_addr[0] = 0xFF;
+		fail = lowpan_fetch_skb(skb, &ipaddr->s6_addr[1], 1);
+		fail |= lowpan_fetch_skb(skb, &ipaddr->s6_addr[11], 5);
+		break;
+	case LOWPAN_IPHC_DAM_10:
+		/* 10:  32 bits.  The address takes
+		 * the form ffXX::00XX:XXXX.
+		 */
+		ipaddr->s6_addr[0] = 0xFF;
+		fail = lowpan_fetch_skb(skb, &ipaddr->s6_addr[1], 1);
+		fail |= lowpan_fetch_skb(skb, &ipaddr->s6_addr[13], 3);
+		break;
+	case LOWPAN_IPHC_DAM_11:
+		/* 11:  8 bits.  The address takes
+		 * the form ff02::00XX.
+		 */
+		ipaddr->s6_addr[0] = 0xFF;
+		ipaddr->s6_addr[1] = 0x02;
+		fail = lowpan_fetch_skb(skb, &ipaddr->s6_addr[15], 1);
+		break;
+	default:
+		pr_debug("DAM value has a wrong value: 0x%x\n", dam);
+		return -EINVAL;
+	}
+
+	if (fail) {
+		pr_debug("Failed to fetch skb data\n");
+		return -EIO;
+	}
+
+	pr_debug("Reconstructed ipv6 multicast addr is:\n");
+	lowpan_raw_dump_inline(NULL, NULL, ipaddr->s6_addr, 16);
+
+	return 0;
+}
+
 static void
 lowpan_compress_udp_header(u8 **hc06_ptr, struct sk_buff *skb)
 {

@@ -927,16 +975,8 @@ lowpan_process_data(struct sk_buff *skb)
 			pr_debug("dest: context-based mcast compression\n");
 			/* TODO: implement this */
 		} else {
-			u8 prefix[] = {0xff, 0x02};
-
-			pr_debug("dest: non context-based mcast compression\n");
-			if (0 < tmp && tmp < 3) {
-				if (lowpan_fetch_skb_u8(skb, &prefix[1]))
-					goto drop;
-			}
-
-			err = lowpan_uncompress_addr(skb, &hdr.daddr, prefix,
-					lowpan_unc_mxconf[tmp], NULL);
+			err = lowpan_uncompress_multicast_daddr(
+					skb, &hdr.daddr, tmp);
 			if (err)
 				goto drop;
 		}
Signature · 1 line
1.8.3.3
author maintainer
#3 lore raw

PATCH 6/6 6lowpan: handle context based source address

In reply to Alexander Aring

Handle context based address when a unspecific address is specified. For other context based address we print a warning and drop the packet currently because we don't support it right now.

Signed-off-by Alexander Aring <[email protected]>
---
 net/ieee802154/6lowpan.c | 48 +++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 45 insertions(+), 3 deletions(-)
net/ieee802154/6lowpan.c +45 -3
index d299560..90eddce 100644
@@ -243,6 +243,39 @@ lowpan_uncompress_addr(struct sk_buff *skb,
 	return 0;
 }
 
+/* Uncompress address function for source context
+ * based address(non-multicast).
+ */
+static int
+lowpan_uncompress_context_based_src_addr(struct sk_buff *skb,
+		struct in6_addr *ipaddr,
+		const u8 sam)
+{
+	switch (sam) {
+	case LOWPAN_IPHC_ADDR_00:
+		/* unspec address ::
+		 * Do nothing, address is already ::
+		 */
+		break;
+	case LOWPAN_IPHC_ADDR_01:
+		/* TODO */
+	case LOWPAN_IPHC_ADDR_02:
+		/* TODO */
+	case LOWPAN_IPHC_ADDR_03:
+		/* TODO */
+		netdev_warn(skb->dev, "SAM value 0x%x not supported\n", sam);
+		return -EINVAL;
+	default:
+		pr_debug("Invalid sam value: 0x%x\n", sam);
+		return -EINVAL;
+	}
+
+	pr_debug("Reconstructed context based ipv6 src addr is:\n");
+	lowpan_raw_dump_inline(NULL, NULL, ipaddr->s6_addr, 16);
+
+	return 0;
+}
+
 /* Uncompress function for multicast destination address,
  * when M bit is set.
  */

@@ -971,9 +1004,18 @@ lowpan_process_data(struct sk_buff *skb)
 	/* Extract SAM to the tmp variable */
 	tmp = ((iphc1 & LOWPAN_IPHC_SAM) >> LOWPAN_IPHC_SAM_BIT) & 0x03;
 
-	/* Source address uncompression */
-	pr_debug("source address stateless compression\n");
-	err = lowpan_uncompress_addr(skb, &hdr.saddr, tmp, _saddr);
+	if (iphc1 & LOWPAN_IPHC_SAC) {
+		/* Source address context based uncompression */
+		pr_debug("SAC bit is set. Handle context based source address.\n");
+		err = lowpan_uncompress_context_based_src_addr(
+				skb, &hdr.saddr, tmp);
+	} else {
+		/* Source address uncompression */
+		pr_debug("source address stateless compression\n");
+		err = lowpan_uncompress_addr(skb, &hdr.saddr, tmp, _saddr);
+	}
+
+	/* Check on error of previous branch */
 	if (err)
 		goto drop;
Signature · 1 line
1.8.3.3

A message that is not in the archive (sent off-list or not yet received): 1376430813-30982-1-git-send-email-alex.aring-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

#5 lore raw

PATCH 1/6 6lowpan: init ipv6hdr buffer to zero

This patch simplify the handling to set fields inside of struct ipv6hdr to zero. Instead of setting some memory regions with memset to zero we initialize the whole ipv6hdr to zero.

This is a optimization for parsing the 6lowpan header and not a bug fix.

Signed-off-by Alexander Aring <[email protected]>
---
 net/ieee802154/6lowpan.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)
net/ieee802154/6lowpan.c +1 -11
index 3b9d5f2..92429db 100644
@@ -223,10 +223,6 @@ lowpan_uncompress_addr(struct sk_buff *skb, struct in6_addr *ipaddr,
 	if (prefcount > 0)
 		memcpy(ipaddr, prefix, prefcount);
 
-	if (prefcount + postcount < 16)
-		memset(&ipaddr->s6_addr[prefcount], 0,
-					16 - (prefcount + postcount));
-
 	if (postcount > 0) {
 		memcpy(&ipaddr->s6_addr[16 - postcount], skb->data, postcount);
 		skb_pull(skb, postcount);

@@ -723,7 +719,7 @@ frame_err:
 static int
 lowpan_process_data(struct sk_buff *skb)
 {
-	struct ipv6hdr hdr;
+	struct ipv6hdr hdr = {};
 	u8 tmp, iphc0, iphc1, num_context = 0;
 	u8 *_saddr, *_daddr;
 	int err;

@@ -868,8 +864,6 @@ lowpan_process_data(struct sk_buff *skb)
 
 		hdr.priority = ((tmp >> 2) & 0x0f);
 		hdr.flow_lbl[0] = ((tmp << 6) & 0xC0) | ((tmp >> 2) & 0x30);
-		hdr.flow_lbl[1] = 0;
-		hdr.flow_lbl[2] = 0;
 		break;
 	/*
 	 * Flow Label carried in-line

@@ -885,10 +879,6 @@ lowpan_process_data(struct sk_buff *skb)
 		break;
 	/* Traffic Class and Flow Label are elided */
 	case 3: /* 11b */
-		hdr.priority = 0;
-		hdr.flow_lbl[0] = 0;
-		hdr.flow_lbl[1] = 0;
-		hdr.flow_lbl[2] = 0;
 		break;
 	default:
 		break;
Signature · 9 lines
1.8.3.3


------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead. 
Download for free and get started troubleshooting in minutes. 
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
#6 lore raw

PATCH 2/6 6lowpan: Fix fragmentation with link-local compressed addresses

In reply to a message not in the archive

From: David Hauweele <[email protected]>

When a new 6lowpan fragment is received, a skbuff is allocated for the reassembled packet. However when a 6lowpan packet compresses link-local addresses based on link-layer addresses, the processing function relies on the skb mac control block to find the related link-layer address.

This patch copies the control block from the first fragment into the newly allocated skb to keep a trace of the link-layer addresses in case of a link-local compressed address.

Edit: small changes on comment issue

Signed-off-by David Hauweele <[email protected]>
Signed-off-by Alexander Aring <[email protected]>
---
 net/ieee802154/6lowpan.c | 6 ++++++
 1 file changed, 6 insertions(+)
net/ieee802154/6lowpan.c +6 -0
index 92429db..632b3fd 100644
@@ -698,6 +698,12 @@ lowpan_alloc_new_frame(struct sk_buff *skb, u16 len, u16 tag)
 	skb_reserve(frame->skb, sizeof(struct ipv6hdr));
 	skb_put(frame->skb, frame->length);
 
+	/* copy the first control block to keep a
+	 * trace of the link-layer addresses in case
+	 * of a link-local compressed address
+	 */
+	memcpy(frame->skb->cb, skb->cb, sizeof(skb->cb));
+
 	init_timer(&frame->timer);
 	/* time out is the same as for ipv6 - 60 sec */
 	frame->timer.expires = jiffies + LOWPAN_FRAG_TIMEOUT;
Signature · 9 lines
1.8.3.3


------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead. 
Download for free and get started troubleshooting in minutes. 
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
#7 lore raw

PATCH 3/6 6lowpan: introduce lowpan_fetch_skb function

In reply to a message not in the archive

This patch adds a helper function to parse the ipv6 header to a 6lowpan header in stream.

This function checks first if we can pull data with a specific length from a skb. If this seems to be okay, we copy skb data to a destination pointer and run skb_pull.

Signed-off-by Alexander Aring <[email protected]>
---
 net/ieee802154/6lowpan.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)
net/ieee802154/6lowpan.h +12 -0
index 61f0ce9..e3348ec 100644
@@ -233,4 +233,16 @@
 					dest = 16 bit inline */
 #define LOWPAN_NHC_UDP_CS_P_11	0xF3 /* source & dest = 0xF0B + 4bit inline */
 
+static inline bool lowpan_fetch_skb(struct sk_buff *skb,
+		void *data, const unsigned int len)
+{
+	if (unlikely(!pskb_may_pull(skb, len)))
+		return true;
+
+	skb_copy_from_linear_data(skb, data, len);
+	skb_pull(skb, len);
+
+	return false;
+}
+
 #endif /* __6LOWPAN_H__ */
Signature · 9 lines
1.8.3.3


------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead. 
Download for free and get started troubleshooting in minutes. 
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
#8 lore raw

PATCH 5/6 6lowpan: lowpan_uncompress_addr with address_mode

In reply to a message not in the archive

This patch drop the pre and postcount calculation from the lowpan_uncompress_addr function.

We use instead a switch case over address_mode value, it's easier to understand what's going on there.

Signed-off-by Alexander Aring <[email protected]>
---
 net/ieee802154/6lowpan.c | 144 +++++++++++++++++++++++++----------------------
 net/ieee802154/6lowpan.h |   8 ++-
 2 files changed, 82 insertions(+), 70 deletions(-)
net/ieee802154/6lowpan.c +77 -67
index 0df8874..d299560 100644
@@ -67,30 +67,6 @@ static const u8 lowpan_ttl_values[] = {0, 1, 64, 255};
 
 static LIST_HEAD(lowpan_devices);
 
-/*
- * Uncompression of linklocal:
- *   0 -> 16 bytes from packet
- *   1 -> 2  bytes from prefix - bunch of zeroes and 8 from packet
- *   2 -> 2  bytes from prefix - zeroes + 2 from packet
- *   3 -> 2  bytes from prefix - infer 8 bytes from lladdr
- *
- *  NOTE: => the uncompress function does change 0xf to 0x10
- *  NOTE: 0x00 => no-autoconfig => unspecified
- */
-static const u8 lowpan_unc_llconf[] = {0x0f, 0x28, 0x22, 0x20};
-
-/*
- * Uncompression of ctx-based:
- *   0 -> 0 bits  from packet [unspecified / reserved]
- *   1 -> 8 bytes from prefix - bunch of zeroes and 8 from packet
- *   2 -> 8 bytes from prefix - zeroes + 2 from packet
- *   3 -> 8 bytes from prefix - infer 8 bytes from lladdr
- */
-static const u8 lowpan_unc_ctxconf[] = {0x00, 0x88, 0x82, 0x80};
-
-/* Link local prefix */
-static const u8 lowpan_llprefix[] = {0xfe, 0x80};
-
 /* private device info */
 struct lowpan_dev_info {
 	struct net_device	*real_dev; /* real WPAN device ptr */

@@ -182,50 +158,86 @@ lowpan_compress_addr_64(u8 **hc06_ptr, u8 shift, const struct in6_addr *ipaddr,
 	return rol8(val, shift);
 }
 
-static void
-lowpan_uip_ds6_set_addr_iid(struct in6_addr *ipaddr, unsigned char *lladdr)
-{
-	memcpy(&ipaddr->s6_addr[8], lladdr, IEEE802154_ADDR_LEN);
-	/* second bit-flip (Universe/Local) is done according RFC2464 */
-	ipaddr->s6_addr[8] ^= 0x02;
-}
-
 /*
- * Uncompress addresses based on a prefix and a postfix with zeroes in
- * between. If the postfix is zero in length it will use the link address
- * to configure the IP address (autoconf style).
- * pref_post_count takes a byte where the first nibble specify prefix count
- * and the second postfix count (NOTE: 15/0xf => 16 bytes copy).
+ * Uncompress address function for source and
+ * destination address(non-multicast).
+ *
+ * address_mode is sam value or dam value.
  */
 static int
-lowpan_uncompress_addr(struct sk_buff *skb, struct in6_addr *ipaddr,
-	u8 const *prefix, u8 pref_post_count, unsigned char *lladdr)
+lowpan_uncompress_addr(struct sk_buff *skb,
+		struct in6_addr *ipaddr,
+		const u8 address_mode,
+		const struct ieee802154_addr *lladdr)
 {
-	u8 prefcount = pref_post_count >> 4;
-	u8 postcount = pref_post_count & 0x0f;
-
-	/* full nibble 15 => 16 */
-	prefcount = (prefcount == 15 ? 16 : prefcount);
-	postcount = (postcount == 15 ? 16 : postcount);
-
-	if (lladdr)
-		lowpan_raw_dump_inline(__func__, "linklocal address",
-						lladdr,	IEEE802154_ADDR_LEN);
-	if (prefcount > 0)
-		memcpy(ipaddr, prefix, prefcount);
-
-	if (postcount > 0) {
-		memcpy(&ipaddr->s6_addr[16 - postcount], skb->data, postcount);
-		skb_pull(skb, postcount);
-	} else if (prefcount > 0) {
-		if (lladdr == NULL)
+	bool fail;
+
+	switch (address_mode) {
+	case LOWPAN_IPHC_ADDR_00:
+		/* for global link addresses */
+		fail = lowpan_fetch_skb(skb, ipaddr->s6_addr, 16);
+		break;
+	case LOWPAN_IPHC_ADDR_01:
+		/* fe:80::XXXX:XXXX:XXXX:XXXX */
+		ipaddr->s6_addr[0] = 0xFE;
+		ipaddr->s6_addr[1] = 0x80;
+		fail = lowpan_fetch_skb(skb, &ipaddr->s6_addr[8], 8);
+		break;
+	case LOWPAN_IPHC_ADDR_02:
+		/* fe:80::ff:fe00:XXXX */
+		ipaddr->s6_addr[0] = 0xFE;
+		ipaddr->s6_addr[1] = 0x80;
+		ipaddr->s6_addr[11] = 0xFF;
+		ipaddr->s6_addr[12] = 0xFE;
+		fail = lowpan_fetch_skb(skb, &ipaddr->s6_addr[14], 2);
+		break;
+	case LOWPAN_IPHC_ADDR_03:
+		fail = false;
+		switch (lladdr->addr_type) {
+		case IEEE802154_ADDR_LONG:
+			/* fe:80::XXXX:XXXX:XXXX:XXXX
+			 *        \_________________/
+			 *              hwaddr
+			 */
+			ipaddr->s6_addr[0] = 0xFE;
+			ipaddr->s6_addr[1] = 0x80;
+			memcpy(&ipaddr->s6_addr[8], lladdr->hwaddr,
+					IEEE802154_ADDR_LEN);
+			/* second bit-flip (Universe/Local)
+			 * is done according RFC2464
+			 */
+			ipaddr->s6_addr[8] ^= 0x02;
+			break;
+		case IEEE802154_ADDR_SHORT:
+			/* fe:80::ff:fe00:XXXX
+			 *		  \__/
+			 *	       short_addr
+			 *
+			 * Universe/Local bit is zero.
+			 */
+			ipaddr->s6_addr[0] = 0xFE;
+			ipaddr->s6_addr[1] = 0x80;
+			ipaddr->s6_addr[11] = 0xFF;
+			ipaddr->s6_addr[12] = 0xFE;
+			memcpy(&ipaddr->s6_addr[14], &lladdr->short_addr,
+					UIP_802154_SHORTADDR_LEN);
+			break;
+		default:
+			pr_debug("Invalid addr_type set\n");
 			return -EINVAL;
+		}
+		break;
+	default:
+		pr_debug("Invalid address mode value: 0x%x\n", address_mode);
+		return -EINVAL;
+	}
 
-		/* no IID based configuration if no prefix and no data */
-		lowpan_uip_ds6_set_addr_iid(ipaddr, lladdr);
+	if (fail) {
+		pr_debug("Failed to fetch skb data\n");
+		return -EIO;
 	}
 
-	pr_debug("uncompressing %d + %d => ", prefcount, postcount);
+	pr_debug("Reconstructed ipv6 addr is:\n");
 	lowpan_raw_dump_inline(NULL, NULL, ipaddr->s6_addr, 16);
 
 	return 0;

@@ -775,7 +787,7 @@ lowpan_process_data(struct sk_buff *skb)
 {
 	struct ipv6hdr hdr = {};
 	u8 tmp, iphc0, iphc1, num_context = 0;
-	u8 *_saddr, *_daddr;
+	const struct ieee802154_addr *_saddr, *_daddr;
 	int err;
 
 	lowpan_raw_dump_table(__func__, "raw skb data dump", skb->data,

@@ -878,8 +890,8 @@ lowpan_process_data(struct sk_buff *skb)
 	if (lowpan_fetch_skb_u8(skb, &iphc1))
 		goto drop;
 
-	_saddr = mac_cb(skb)->sa.hwaddr;
-	_daddr = mac_cb(skb)->da.hwaddr;
+	_saddr = &mac_cb(skb)->sa;
+	_daddr = &mac_cb(skb)->da;
 
 	pr_debug("iphc0 = %02x, iphc1 = %02x\n", iphc0, iphc1);
 

@@ -961,8 +973,7 @@ lowpan_process_data(struct sk_buff *skb)
 
 	/* Source address uncompression */
 	pr_debug("source address stateless compression\n");
-	err = lowpan_uncompress_addr(skb, &hdr.saddr, lowpan_llprefix,
-				lowpan_unc_llconf[tmp], skb->data);
+	err = lowpan_uncompress_addr(skb, &hdr.saddr, tmp, _saddr);
 	if (err)
 		goto drop;
 

@@ -982,8 +993,7 @@ lowpan_process_data(struct sk_buff *skb)
 		}
 	} else {
 		pr_debug("dest: stateless compression\n");
-		err = lowpan_uncompress_addr(skb, &hdr.daddr, lowpan_llprefix,
-				lowpan_unc_llconf[tmp], skb->data);
+		err = lowpan_uncompress_addr(skb, &hdr.daddr, tmp, _daddr);
 		if (err)
 			goto drop;
 	}
net/ieee802154/6lowpan.h +5 -3
index e3348ec..6596644 100644
@@ -196,10 +196,12 @@
 /* Values of fields within the IPHC encoding second byte */
 #define LOWPAN_IPHC_CID		0x80
 
+#define LOWPAN_IPHC_ADDR_00	0x00
+#define LOWPAN_IPHC_ADDR_01	0x01
+#define LOWPAN_IPHC_ADDR_02	0x02
+#define LOWPAN_IPHC_ADDR_03	0x03
+
 #define LOWPAN_IPHC_SAC		0x40
-#define LOWPAN_IPHC_SAM_00	0x00
-#define LOWPAN_IPHC_SAM_01	0x10
-#define LOWPAN_IPHC_SAM_10	0x20
 #define LOWPAN_IPHC_SAM		0x30
 
 #define LOWPAN_IPHC_SAM_BIT	4
Signature · 9 lines
1.8.3.3


------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead. 
Download for free and get started troubleshooting in minutes. 
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
maintainer
#9 lore raw
In reply to Alexander Aring

You're submitting 7 patches, one set is numbered 1-6 and this one has no number.

What in the world do you want me to do with these patches?

What tree are they targetted at?

Are there dependencies?

What order should I apply them in?

You've given me none of this information, therefore I am tossing all of these patches and you will need to submit them properly all over again.

Thanks.

Reviewed-by
#10 lore raw
Quoted 2 lines · David Miller

You're submitting 7 patches, one set is numbered 1-6 and this one has no number.

The unnumbered patch is independent from the rest. But yes, he shouldn't have sent it in the same thread.

To provide a bit of context, 6LoWPAN support in the kernel is currently in an embarrassingly badly broken state. On a good day, you can get ping to an RFC-compliant peer to work, sometimes even both ways, but only as long as you use link-local addresses and keep the payload small. Beyond that, it's all bugland.

Alexander thus started to fix the 6LoWPAN issues he and others, myself included, had bumped into. It's a lot of changes for a relatively small file (6lowpan.c) and later on he'll have at least one more batch for fragmentation, but when all that is done, we'll finally have a stack that can actually do real work.

Alexander, since you'll have to re-submit anyway, you may want to add a

Reviewed-by Werner Almesberger <[email protected]>

to all the patches.

- Werner