Skip to contentSkip to conversation

MIPS: netlogic: xlr: Serial support depends on CONFIG_SERIAL_8250

PATCH In review Markos Chandras 2 participants 3 messages Aug 15, 2013 – Oct 25, 2013 MIPS

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 MIPS: netlogic: xlr: Serial support depends on CONFIG_SERIAL_8250

The nlm_early_serial_setup code needs the early_serial_setup symbol which is only available if CONFIG_SERIAL_8250 is selected. Fixes the following build problem:

arch/mips/built-in.o: In function `nlm_early_serial_setup':
setup.c:(.init.text+0x274): undefined reference to `early_serial_setup'
make: *** [vmlinux] Error 1

---
 arch/mips/netlogic/xlr/setup.c | 4 ++++
 1 file changed, 4 insertions(+)
arch/mips/netlogic/xlr/setup.c +4 -0
index 214d123..6d7d75e 100644
@@ -60,6 +60,7 @@ unsigned int  nlm_threads_per_core = 1;
 struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
 
+#ifdef CONFIG_SERIAL_8250
 static void __init nlm_early_serial_setup(void)
 {
 	struct uart_port s;
@@ -78,6 +79,9 @@ static void __init nlm_early_serial_setup(void)
 	s.membase	= (unsigned char __iomem *)uart_base;
 	early_serial_setup(&s);
 }
+#else
+static inline void nlm_early_serial_setup(void) {}
+#endif
 
 static void nlm_linux_exit(void)
 {
Signature · 1 line
1.8.3.2
#1 lore raw
Quoted 26 lines

The nlm_early_serial_setup code needs the early_serial_setup symbol which is only available if CONFIG_SERIAL_8250 is selected. Fixes the following build problem:

arch/mips/built-in.o: In function `nlm_early_serial_setup':
setup.c:(.init.text+0x274): undefined reference to `early_serial_setup'
make: *** [vmlinux] Error 1

---
 arch/mips/netlogic/xlr/setup.c | 4 ++++
 1 file changed, 4 insertions(+)
arch/mips/netlogic/xlr/setup.c +1 -0
index 214d123..6d7d75e 100644
@@ -60,6 +60,7 @@ unsigned int  nlm_threads_per_core = 1;
 struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
 
+#ifdef CONFIG_SERIAL_8250
 static void __init nlm_early_serial_setup(void)
 {
        struct uart_port s;

arch/mips/netlogic/xlr/setup.c static void __init nlm_early_serial_setup(void) · line 85

Quoted 7 lines
arch/mips/netlogic/xlr/setup.c +3 -0
@@ -78,6 +79,9 @@ static void __init nlm_early_serial_setup(void)
        s.membase       = (unsigned char __iomem *)uart_base;
        early_serial_setup(&s);
 }
+#else
+static inline void nlm_early_serial_setup(void) {}
+#endif
 

The UART device is on the SoC, so adding 'select SERIAL_8250' to the Kconfig for NLM_XLP_BOARD may be a better option.

JC.

#2 lore raw

PATCH 1/1 MIPS: Netlogic: Remove XLR early serial setup

In reply to Markos Chandras

The early serial code is not needed because we already have early printk support provided by common/earlycons.c

This change also fixes the following build error that occurs when CONFIG_SERIAL_8250 is not configured for Netlogic XLR boards:

arch/mips/built-in.o: In function `nlm_early_serial_setup':
setup.c:(.init.text+0x274): undefined reference to `early_serial_setup'
make: *** [vmlinux] Error 1

---
 arch/mips/include/asm/netlogic/xlr/xlr.h |    5 -----
 arch/mips/netlogic/xlr/platform.c        |    4 ++--
 arch/mips/netlogic/xlr/setup.c           |   20 --------------------
 3 files changed, 2 insertions(+), 27 deletions(-)
arch/mips/include/asm/netlogic/xlr/xlr.h +0 -5
index c1667e0..ceb991c 100644
@@ -35,11 +35,6 @@
 #ifndef _ASM_NLM_XLR_H
 #define _ASM_NLM_XLR_H
 
-/* Platform UART functions */
-struct uart_port;
-unsigned int nlm_xlr_uart_in(struct uart_port *, int);
-void nlm_xlr_uart_out(struct uart_port *, int, int);
-
 /* SMP helpers */
 void xlr_wakeup_secondary_cpus(void);
 
arch/mips/netlogic/xlr/platform.c +2 -2
index 7b96a91..4785932 100644
@@ -23,7 +23,7 @@
 #include <asm/netlogic/xlr/pic.h>
 #include <asm/netlogic/xlr/xlr.h>
 
-unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
+static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
 {
 	uint64_t uartbase;
 	unsigned int value;
@@ -41,7 +41,7 @@ unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
 	return value;
 }
 
-void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
+static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
 {
 	uint64_t uartbase;
 
arch/mips/netlogic/xlr/setup.c +0 -20
index 214d123..de1f287 100644
@@ -60,25 +60,6 @@ unsigned int  nlm_threads_per_core = 1;
 struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
 
-static void __init nlm_early_serial_setup(void)
-{
-	struct uart_port s;
-	unsigned long uart_base;
-
-	uart_base = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
-	memset(&s, 0, sizeof(s));
-	s.flags		= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
-	s.iotype	= UPIO_MEM32;
-	s.regshift	= 2;
-	s.irq		= PIC_UART_0_IRQ;
-	s.uartclk	= PIC_CLK_HZ;
-	s.serial_in	= nlm_xlr_uart_in;
-	s.serial_out	= nlm_xlr_uart_out;
-	s.mapbase	= uart_base;
-	s.membase	= (unsigned char __iomem *)uart_base;
-	early_serial_setup(&s);
-}
-
 static void nlm_linux_exit(void)
 {
 	uint64_t gpiobase;
@@ -215,7 +196,6 @@ void __init prom_init(void)
 	memcpy(reset_vec, (void *)nlm_reset_entry,
 			(nlm_reset_entry_end - nlm_reset_entry));
 
-	nlm_early_serial_setup();
 	build_arcs_cmdline(argv);
 	prom_add_memory();
 
Signature · 1 line
1.7.9.5