Skip to contentSkip to conversation

dracut.sh: Fix [no-]early-microcode parameter and add documentation.

PATCH In review Daniel Schaal 3 participants 3 messages Aug 16, 2013 – Aug 19, 2013 1 message not in the archive

lore
Share & tools
lore

Daniel Schaal

author
#0 lore raw

PATCH 1/1 dracut.sh: Fix [no-]early-microcode parameter and add documentation.

[no-]early-microcode was missing from getopt argument list.

Let arguments passed by command line override config files.

---
 dracut.8.asc      | 6 ++++++
 dracut.conf.5.asc | 3 +++
 dracut.sh         | 8 ++++++--
 3 files changed, 15 insertions(+), 2 deletions(-)
dracut.8.asc +6 -0
index 714ba85..ee9d8de 100644
@@ -225,6 +225,12 @@ example:
 **--no-kernel**::
     do not install kernel drivers and firmware files
 
+**--early-microcode**::
+    Combine early microcode with ramdisk
+
+**--no-early-microcode**::
+    Do not combine early microcode with ramdisk
+
 **--print-cmdline**::
     print the kernel command line for the current disk layout
dracut.conf.5.asc +3 -0
index df876cc..89beeb1 100644
@@ -117,6 +117,9 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *no_kernel=*"{yes|no}"::
     Do not install kernel drivers and firmware files (default=no)
 
+*early_microcode=*"{yes|no}"::
+    Combine early microcode with ramdisk (default=no)
+
 *stdloglvl*="__\{0-6\}__"::
     Set logging to standard error level.
dracut.sh +6 -2
index d0d1c11..7071d05 100755
@@ -346,6 +346,8 @@ TEMP=$(unset POSIXLY_CORRECT; getopt \
     --long printsize \
     --long regenerate-all \
     --long noimageifnotneeded \
+    --long early-microcode \
+    --long no-early-microcode \
     -- "$@")
 
 if (( $? != 0 )); then

@@ -388,8 +390,8 @@ while :; do
         --kernel-only) kernel_only="yes"; no_kernel="no";;
         --no-kernel)   kernel_only="no"; no_kernel="yes";;
         --print-cmdline) print_cmdline="yes"; hostonly_l="yes"; kernel_only="yes"; no_kernel="yes";;
-        --early-microcode) early_microcode="yes";;
-        --no-early-microcode) early_microcode="no";;
+        --early-microcode) early_microcode_l="yes";;
+        --no-early-microcode) early_microcode_l="no";;
         --strip)       do_strip_l="yes";;
         --nostrip)     do_strip_l="no";;
         --hardlink)    do_hardlink_l="yes";;

@@ -665,6 +667,8 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 [[ $show_modules_l ]] && show_modules=$show_modules_l
 [[ $nofscks_l ]] && nofscks="yes"
 [[ $ro_mnt_l ]] && ro_mnt="yes"
+[[ $early_microcode_l ]] && early_microcode=$early_microcode_l
+[[ $early_microcode ]] || early_microcode=no
 # eliminate IFS hackery when messing with fw_dir
 fw_dir=${fw_dir//:/ }
Signature · 1 line
1.8.4.rc2

A message that is not in the archive (sent off-list or not yet received): 1376687775-31272-1-git-send-email-farbing-S0/[email protected]

#2 lore raw
Quoted 9 lines · Daniel Schaal

[no-]early-microcode was missing from getopt argument list.

Let arguments passed by command line override config files.

---
 dracut.8.asc      | 6 ++++++
 dracut.conf.5.asc | 3 +++
 dracut.sh         | 8 ++++++--
 3 files changed, 15 insertions(+), 2 deletions(-)

Thanks! pushed

#3 lore raw
In reply to a message not in the archive
Quoted 3 lines · Daniel Schaal

[no-]early-microcode was missing from getopt argument list.

Let arguments passed by command line override config files.

Ooh, didn't even realize those needed to be changed. Thank you!

Quoted 77 lines
---
 dracut.8.asc      | 6 ++++++
 dracut.conf.5.asc | 3 +++
 dracut.sh         | 8 ++++++--
 3 files changed, 15 insertions(+), 2 deletions(-)
dracut.8.asc +6 -0
index 714ba85..ee9d8de 100644
@@ -225,6 +225,12 @@ example:
 **--no-kernel**::
     do not install kernel drivers and firmware files
 
+**--early-microcode**::
+    Combine early microcode with ramdisk
+
+**--no-early-microcode**::
+    Do not combine early microcode with ramdisk
+
 **--print-cmdline**::
     print the kernel command line for the current disk layout
dracut.conf.5.asc +3 -0
index df876cc..89beeb1 100644
@@ -117,6 +117,9 @@ If chrooted to another root other than the real root device, use --fstab and pro
 *no_kernel=*"{yes|no}"::
     Do not install kernel drivers and firmware files (default=no)
 
+*early_microcode=*"{yes|no}"::
+    Combine early microcode with ramdisk (default=no)
+
 *stdloglvl*="__\{0-6\}__"::
     Set logging to standard error level.
dracut.sh +6 -2
index d0d1c11..7071d05 100755
@@ -346,6 +346,8 @@ TEMP=$(unset POSIXLY_CORRECT; getopt \
     --long printsize \
     --long regenerate-all \
     --long noimageifnotneeded \
+    --long early-microcode \
+    --long no-early-microcode \
     -- "$@")
 
 if (( $? != 0 )); then

@@ -388,8 +390,8 @@ while :; do
         --kernel-only) kernel_only="yes"; no_kernel="no";;
         --no-kernel)   kernel_only="no"; no_kernel="yes";;
         --print-cmdline) print_cmdline="yes"; hostonly_l="yes"; kernel_only="yes"; no_kernel="yes";;
-        --early-microcode) early_microcode="yes";;
-        --no-early-microcode) early_microcode="no";;
+        --early-microcode) early_microcode_l="yes";;
+        --no-early-microcode) early_microcode_l="no";;
         --strip)       do_strip_l="yes";;
         --nostrip)     do_strip_l="no";;
         --hardlink)    do_hardlink_l="yes";;

@@ -665,6 +667,8 @@ stdloglvl=$((stdloglvl + verbosity_mod_l))
 [[ $show_modules_l ]] && show_modules=$show_modules_l
 [[ $nofscks_l ]] && nofscks="yes"
 [[ $ro_mnt_l ]] && ro_mnt="yes"
+[[ $early_microcode_l ]] && early_microcode=$early_microcode_l
+[[ $early_microcode ]] || early_microcode=no
 # eliminate IFS hackery when messing with fw_dir
 fw_dir=${fw_dir//:/ }
Signature · 6 lines
1.8.4.rc2

--
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html